Display multiple combination of values all at a time in the planning layout

Hi,
we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
output of the layout is as follows for country GERMANY
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
CONTINENT value
AFRICA 342
AFRICA 267
AFRICA 768
How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
AFRICA 342
AFRICA 267
AFRICA 768
the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
any help is greatly appreciated.
thanks

Hi Marc,
yes. there u go. my name is hari.
thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
we have cube data as follows
Code Area Group Price
ABCD EUR 111 20USD
ABCD USA 222 30USD
Code, Area, Group are not attributes of each other.
we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
======
Header
======
Code : ABCD
Group: 111  (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
EUR  20USD
for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
======
Header
======
Code : ABCD
Group: 222  (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
USA  30USD
we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
======
Header
======
Code : ABCD
======
Layout
======
Area Price
EUR  20USD
USA  30USD
this might also work out for us.
======
Header
======
Code : ABCD
======
Layout
======
Area Price Group
EUR  20USD 111
USA  30USD 222
How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
hope it is clear.
Message was edited by: hari143

Similar Messages

  • How to display multiple waveforms (more than 2) with current time on x axis

    Dear All,
    I am trying to plot more than 2 waveforms on a graph/chart with current absolute time on the x-axis.
    It works if I plot two waveforms on XY graph  but shows broken wires (mismatching of data types) for more than 2 waveforms.
    Now, I have tried waveform charts and graphs, and ti doesnt work there too.
    I have attached my VI below.
    Can someone please help me out with this. 
    Attachments:
    timing problem.vi ‏21 KB

    Dear Mahu,
    I have attached a snapshot of my VI. This snapshot shows a VI which works perfectly but as soon as you will extend the bundle and add another random number generator, it will show data mismatching. 
    The reason why I am not using a chart, although it works perfectly for this, is beacuse I want to control the x axis (start and end time) to see data at time as specified by user. 
    Waiting for your reply. 
    Attachments:
    pic of prob.JPG ‏46 KB

  • Retreive the values from a user Input Popup before planning layout

    Hi all,
    The user run a planning layout and is coming the popup where he can choose :
    Cost Center
    Currency .
    Is there any function module between executing the popup and showing the layout.
    I have to create a function module to check the entries of the users.
    Regards

    Frank,
    There are multiple ways to ensure that the values entered by the users are valid. A few of them are:
    1. Restrict values for users with in SEM planning area.
    2. Write custom code to restrict values in dropdown list.
    3. Another  way of doing it is by using two sets of variables. One for input by users and the other for passing the values in the planning level. The user would enter a value, the code for passing the value to the planning level, would check the data entered and then either pop up an error message or refresh the layout with the data.
    As mentioned, the approach would depend on the specfic need and the design of the planning application.
    Sunil

  • Urgent!!! How to give a value to a BEx variable in the planning fuction?

    Hi all,
    does anybody know how can set variable's value in the palnning fuction (type exit) in IP?
    The two function modules in BPS which make this job don't work in the IP.
    thanks very much for any proposal.
    hongwei

    Hi,
    Reg the first part of the question, can you please explain how do you want to capture the variable for the custom planning function? Because, when I look at standard functions delivered by SAP, in the FROM CHANGE and TO CHANGE(for example copy function), we can select the BI variables or create new variables also.
    To pass the values to this variable from BEx Analyzer, we need to use the command range in BEx Analyzer and capture the values.
    I have used this approach to capture the BEx variable values into a FOX function using VARV function, but Im not pretty sure how to pass it to a custom planning function.
    Regarding the second part of the question can you pls look at FM :   RSPLSSE_PLSEQ_EXECUTE. I think you need to embedd your planning function into a sequence and call it with the above FM.
    You can also have a look at the ABAP program that is used to trigger a planning sequence by placing a breakpoint in any of the planning functions : "RSPLS_PLSEQ_EXECUTE" wherein you can pass the sequence name in the variant.
    Rgds
    Shyam

  • HT201210 When I try to update my iphone to the latest iphone software on my MacBook in itunes a message displays "This iphone cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable.

    Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers

    Try posting to the correct forum.
    This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
    Try posting to the iTunes for the Mac forum.

  • Display multiple choice column selections on a separate line in the body of email

    This question could have been answered elsewhere and I just don't realize it. I have a SharePoint Foundation 2010 form (11 columns) that has one choice column allowing the user to select multiple options (checkboxes). The selections have been typed into "type each choice on a separate line". Moving to Designer we have created a workflow that sends an email when the user submits to form.
    If Current Item: Select shift equals DAY request    Email ................
    The body of the email has this field:
    Information Being Requested: [%Current Item: The following information is being requested%].
    When the user gets the email the output for this field is string on a single line separated by a comma. What I need is each of the selections to be on a separate line so the users can easily read what is being requested and not miss any of the selection. I'm stuck. I'm not worried about text wrapping. I've been searching for hours but either it's not what a need, it's over my head, or I just don't know where to make the changes. I don't use VS but I do know html and I'm fairly comfortable in Designer. I would appreciate any help.

    Firstly, can you edit your post and take the question out of the code / quote box. It'll make it easier to read.
    Secondly the options depend on the version of SharePoint.  Are we to assume you're using SharePoint 2003 or 2007 as you've posted into the legacy forums?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Combination exists in Master Data Table, but error occurs in layout

    Hi,
    We are getting an error in planning layouts that state that a combination of Cost Center and Profit Center is not included in master data table for characteristic. I looked at note 1222910 that apparently fixes this issue, but we are on SP21 and the note was included in SP19.
    Any suggestions?
    Br,
    Sonni

    Hi there,
    That seems an issue throwed by the characteristic relationships.
    Are you sure the profit center/cost center issued in the message exist in the master data?
    It seems some how you're getting that combination of that profit center/cost center in the planning layout and the charateristic relationship is validating that.
    See if you query has the valid combinations for the profit centers/cost centers in the filter and/or variables.
    Diogo.

  • Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

    Hello,
    We are on BW - BPS 3.5v
    We have a realtime infocube with only time characteristic 0CALMONTH.
    There is a requirement that in my Planning layout I have to display the Keyfigures for:
    (CURRENT MONTH)    (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
    I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
    In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
    I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube. 
    I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
    Thanks for any suggestions.
    Vish

    Hi.
    Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
    Did you have match records in you cube ?
    Regards.

  • How to Display multiple records in Table in VC without using BAPI.

    Hi All,
    I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
    Regards,
    Sheetal

    Hi Sheetal,
    if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
    Best Regards,
    marcel

  • Displaying multiple rows in html

    Hi folks, another newbie question for you:
    Is it possible to have an HTML area which displays multiple rows of a query?
    I can get the page to display the first row of the query but I need all the possible rows to show up (in new lines where possible....). It's to be displayed as a final report for an application, pulling in details from numerous tables, so a normal report page was a no no. Can anybody help??
    Dave

    It's kind of difficult to explain but the report heading is taken from one table. the next paragraph (a list of people) is taken from another table (but dependant on the title info - place date etc..). the rest of the information is using data from three tables depending on (yet again) the title (which is an LOV returning an ID just now). the rest of the information is broken into sections which are headed by two lots of info from two of the three tables and sectioned by item from these two tables. If I tried one query I'd end up with LOTS of copies of the same info all over the shop. All I need is the pl/sql to check a table and return the info from the only column I need from that table, display the mulriple rows in a section and I can do the rest I think. As I said, I can display the first row and that's it.....
    sorry if that was confusing and long-winded (welcome to my day... :) )

  • How to display multiple tables from database using netbeans swing gui

    plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

    Layered Pane with JTables or you can easily to it with a little scripting and HTML.
    plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

  • Creating a new value 'ALL' in an existing object

    Hi,
       I have a dimension object which has only two values say 'yes' and 'no' in it.Since i need an another value 'ALL' in it,I added the following sql in the associate a list of values
    SELECT DISTINCT
      XXXXXXXXXXXXXX
    FROM
      XXXXXXXXXXXXX
    union
    select 'ALL'
    My database is mysql.
    The problem is when i pull this object in infoview as a prompt it contains all the three values 'yes','no' and 'all'.But when i select 'all' it throws no data to retrive but it works fine for other two prompt i,e 'yes','no'.
    May i know where i m going wrong.

    Assume you have created promps and have LOV as ('YES','NO','ALL','NONE')
    assume the output has 10 records
    one column the value as yes or no
    and out of 10 records there are 6 yes and 4 no
    while running the report if you select YES it is returning 6 records
    if you select NO it is returning 4 records
    if you select YES it should select all 10 records
    if you select NONE it should not select any records
    for this you need to write 2 sub-queries in a case statement in the where clause of the object
    eg.,
    select a,b,c
    from x
    where column=select case
    when(@prompt(,,mono,,'YES') then 'YES')
    when (@prompt(,,,mono,,,'NO') then 'NO'
    when (@prompt(,,,multi,,'ALL') then select (distinct(col_name) from table name)
    when (@prompt(,,,mono,,'NONE') then select NULL
    Let me know if you have any issues
    Thanks,
    -G

  • HT4666 I need to display a timecode window of selected sections of edited     FCPX project. I need to be able to start at 00:00:00 and time to the end of the selection. Can I do this with the timecode generator in FCPX ? Thanks for helping.

    I need to display a timecode of selected sections in edited FCPX timeline. I need the timecode display to start at 00:00:00 and time to the end of the selection. Can I do this using the timecode generator in FCPX ?
    Thanks

    FxFactory Pro: Timecode Plugin
    Generates a timecode based on the current playback position relative to the duration of the clip.
    Full Disclosure:  I work for Noise Industries.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How to display multiple prompt values selected, in the report

    Hi,
    I have a LOV : SELECT DISTINCT CO.V_MOVEMENT.ORIGIN_BRANCH_CODE FROM CO.V_MOVEMENT ORDER BY 1
    and a parameter associated with it which is multiple selection enabled. The parameter name is P_BRANCH.
    When I am displaying P_BRANCH at the top of my report (RTF), it's showing only one value whereas I need to display all the selected value as Comma Separated.
    Please help.
    Thanks & Regards,
    Antara

    The other option to fetch all the selected values to the report (RTF) is to create a dataset for the field and in the template create a repeating group for each value.
    Eg:
    1) The SQL is : ( In SQL Server, where :P_S_ORIGIN_BRANCH_CODE is Prompt )
    SELECT DISTINCT
    :P_S_ORIGIN_BRANCH_CODE as P_BRANCH
    2) XML is :
    <DATA_DS>
    <G_1>
    <P_BRANCH>RTM</P_BRANCH>
    </G_1>
    <G_1>
    <P_BRANCH>ABC</P_BRANCH>
    </G_1>
    </DATA_DS>
    3) In report we can display the values as below:
    RTM,
    ABC
    But The Required Output in RTF is : (Values seperated by ",")
    RTM, ABC
    Your help would be highly appreciated.
    Thanks & Regards,
    Antara
    Edited by: user450412 on Oct 10, 2011 4:11 PM

  • Displaying Multiple Values on GUI components - best way to implement

    Hi,
    my program needs to implement a basic function that most commercial programs use very widely: If the program requires that a GUI component (say a JTextField) needs to display multiple values it either goes <blank> or say something more meaningfull like "multiple values". What is the best way of implementing it?
    In particular:
    My data is a class called "Student" that among other things has a field for the student name, like: protected String name; and the usual accessor methods (getName, setName) for it.
    Assuming that the above data (i.e. Student objects) is stored in a ListModel and the user can select multiple "Students", if a JTextField is required to display the user selection (blank for multiple selections, or the student "name" for a single selection), what is the best (OO) way of implementing it? Is there any design pattern (best practice) for this basic piece of functionality? A crude way is to have the JTextField check and compare all the time the user selections one by one, but I'm sure there must be a more OO/better approach.
    Any ideas much appreciated.
    Kyri.

    Ok, I will focus on building a solution on 12c.
    right now I have used a USER_DATASTORE with a procedure to glue all the field together in one document.
    This works fine for the search.
    I have created a dummy table on which the index is created and also has an extra field which contains the key related to all the tables.
    So, I have the following tables:
    dummy_search
    contracts
    contract_ref
    person_data
    nac_data
    and some other tables...
    the current design is:
    the index is on dummy_search.
    When we update contracts table a trigger will update dummy_search.
    same configuration for the other tables.
    Now we see locking issues when having a lot of updates on these tables as the same time.
    What is you advice for this situation?
    Thanks,
    Edward

Maybe you are looking for