Display name and value on label of vertical bar chart
Hi,
i have a vertical bar chart. On x-axis there are Countries: (Italy, Netherlands and so on), and on y-axies there are the values.
When i mouse over a bar, on default is shown only the value. I want show a tooltip with the value and the name.
For example, when i mouse over Netherlands bar, i want to display, NETHERLANDS , 92,45.
I've modified bar.pcxml file adding following string:
FormatString='%_YVALUE'
I've restarted all processes, but now when i mouse over on bar i see a tooltip with %_YVALUE text.
What's the correct syntax?
Thanks
Giancarlo
I don't think its possible to use this '%_YVALUE' for Bar graphs. Please refer to table 1.1 in the below link for the supported values for FormatString for each graph type:
[http://www.corda.com/docsource/doc4/popchart/docs/builder/creatin7.htm#447987]
As you can see, '%_YVALUE' and '%_XVALUE' are supported for X-Y graphs only, which I guess are Scatter and Bubble charts. I tried using other ones like '%_GRAPH_TOTAL' for bar graphs which just works fine.
Hope this helps!!
Thanks
Similar Messages
-
Custom page : displaying attribute display name and values
Hi !!
I'm developping a specific screen. I have a zone where I want to display a list of fields with a label containing the display name of an attribute and with a textbox containg the value of the attribute.
For now, I'm doing that like this :
- In a region, for each attribute I create a MessageTextInput with these properties :
View Instance : the view that gets the attributes values
View Attribute : the attribute I want to display in this field
Prompt : a hard coded label that corresponds to the attribute.
I know this isn't the right approach and I'm looking for a better way to do that as there is some bad sides :
- my view object gets all the attributes of an attribute group. If I add an attribute to the attribute group, it will not be displayed in my page. I'll have to add it manually and reimport the xml.
- if I change the display name, I will also have to manually edit the xml file and reimport it
- I want a multi-language screen : if I'm connected in english I want my screen to display the attribute's english display name, and if I'm connected in french I want my screen to display the attribute's french display name.
So how can I do it ?
Is there an region or item which has a "View Instance" property and that is able to display items depending on the view fields ?
Will I have to manually write a controller that builds this page dynamically ?
Thanks a lotYou have to use personalization and add a messageTextInput and set the prompt, viewInstance and viewAttribute properties. You can get your prompt translated using the translate options in Manage Levels page in personalization tool or use XLIFFExtractor and XLIFFImporter to manually do translations.
Read OA Personalization guide for details. -
Help in retrieving the element attribute name and value..
Hi have to retrieve the attribute name and value from the element.....
requirement is like this
<ws:GetRightNowProductViewByDivisionResponse xmlns:ws="http://ws.sage.co.uk/">
<ws:GetRightNowProductViewByDivisionResult ProductID=" " RightNowProductView=""/>
</ws:GetRightNowProductViewByDivisionResponse>
i should get all the element attbutes names as attributes in above mentioned format ..using xquery...
here is the respone ....
<sage:sageRequestResponse xmlns:sage="http://www.sage.com">
<env:EaiEnvelope xmlns:env="http://www.sage.com/Envelope">
<env:Domain>string</env:Domain>
<env:Service>RightNowBroker</env:Service>
<env:UserId>string</env:UserId>
<env:OperationName>GetRightNowProductViewByDivision</env:OperationName>
<env:Payload>
<ws:GetRightNowProductViewByDivisionResult xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ws="http://ws.sage.co.uk/">
<xs:schema id="NewDataSet" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:MainDataTable="RightNowProductView" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="RightNowProductView">
<xs:complexType>
<xs:sequence>
<xs:element name="ProductId" type="xs:short"/>
<xs:element name="Product" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
<xs:unique name="Constraint1" msdata:PrimaryKey="true">
<xs:selector xpath=".//RightNowProductView"/>
<xs:field xpath="ProductId"/>
</xs:unique>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1"/>
</ws:GetRightNowProductViewByDivisionResult>
</env:Payload>
</env:EaiEnvelope>
</sage:sageRequestResponse>Hi
Just as an aside to the comments above, a scenario we see occasionally is where a desk provides an internal function (e.g. a helpdesk) and you really just want to get the name display (as seen on the handsets) onto the CAD display.
You can do this by doing a reverse lookup over HTTP against CUCM. There are a number of posts around, these should get you started :
https://supportforums.cisco.com/thread/2065114
https://supportforums.cisco.com/message/3024617
A couple of notes:
- It looks up against the directory, NOT the actual calling line. So you can add stuff to the directory to get external callers to show up by name, but should expect the unexpected when you have shared lines (e.g. multipel directory entries with one tel number for whatever reason)
- If you want to do different lookups (i.e. get names back in a different format, get the actual line display name from CUCM, or lookup elsewhere) then you would need to either:
1) Do it via SOAP or another technology from the UCCX script engine
2) Put in a small external web service to do the lookups and allow UCCX to query via simple HTTP
3) Use a DB for the numbers so you can read/write to it from UCCX and regularly update the data from wherever you like
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts... -
Hi,
We have a custom Work Item we use to track RMA's. I've created a string property called RMA Number which is also used as a key.
RMAs do not have titles or any other identifying properties other than the unique RMA number (think incident number).
I was wondering what the best approach would be to set these other fields ("Title", "Display Name" and "Name") to the RMA Number value (RMAXXX), as I'm currently investigating using a powershell script via a workflow.
Thanks,
PietroHi Marcel,
I've come up with the following:
# Load the SMlets module
Import-Module SMlets
# Get the RMA Class
$RMAClass = Get-SCSMObject -Class (Get-SCSMClass -Name MyWorkItem$)
foreach ($RMA in $RMAClass)
$RMANumber = $RMA.RMANumber
$RMA | Set-SCSMObject -PropertyHashtable @{"DisplayName" = $RMANumber; “Title” = $RMANumber; ”Description” = $RMANumber; }
Is it possible to make it aware of which RMA work item executed it, and only update that one? Updating all the records each time a new one is created will cause some problems in the future.
Thanks,
Pietro -
SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user
Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
# Visitor Page Views %
1 Cinthia XXXXXXXXXX 359 0,55%
5 Giselle XXXXXXXXXX 143 0,22%
7 Aline XXXXXXXXXX 138 0,21%
15 nt\cmazevedo 111 0,17%
60 nt\gbsantana 69 0,11%
73 nt\aglsiqueira 65 0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks! -
How to get all property names and values of an bean instance at runtime?
How can I get all property names and values of an bean instance at runtime?
(The class of the bean instance is dynamic and I can not know before I write the code .)Look at Class. It has a way to get at all public methods and attributes.
If you need to get to private attributes you can do what the Introspector does and expect the methods to follow the Bean pattern and pull the attributes out based upon that. Privates are all hidden from direct access but through the Bean Pattern they can be figured out. -
How to get the name and value of an attribute on a node/element that is not a child
Hello,
Can someone shed some wisdom on how I can compare 2 xml nodes for differences.
My main challenge is I need to use the attributes/values of 'ProductDescription' and 'Features' as 'key' to identify the same node in
another doc with the same layout, but different content.
I am having trouble getting the name of the attribute on the node, 'ProductDescription' and 'Features'. I can only seem to get the node names, but not the attributes on the node. I need the name, because it can be different from doc to doc, so
I can't hardcode this.
Can someone please help with how to retrieve an attribute name/value on a node that is not a child. Here's an example of what
my xml looks like:
DECLARE
@myDoc1 xml
,@mydoc2 xml
DECLARE
@ProdID int
SET @myDoc1 ='<ProductDescription ProductID="1" ProductName="Road Bike">
<Features featureID = "1" featureName = "body">
<Warranty>1 year parts and labor</Warranty>
<Maintenance>3 year parts and labor extended maintenance is available</Maintenance>
</Features>
<features featureID = "2" featureName = "seat">
<Warranty>1 year parts and labor</Warranty>
<Maintenance>2 year parts and labor extended maintenance is available</Maintenance>
</Features>
</ProductDescription>
SET @myDoc2 ='<ProductDescription ProductID="1" ProductName="Road Bike">
<Features featureID = "1" featureName = "body">
<Warranty>2 year parts and labor</Warranty>
<Maintenance>3 year parts and labor extended maintenance is available</Maintenance>
</Features>
<features featureID = "2" featureName = "wheel">
<Warranty>1 year parts and labor</Warranty>
<Maintenance>2 year parts and labor extended maintenance is available</Maintenance>
</Features>
</ProductDescription>
I need to compare the attributes of 'ProductDescription' and 'Features' from @mydoc1 against @mydoc2 to see if they are the same based on those 2 nodes first. If they are, then i want to show the difference in the child elements.
This will eventually be an outer join to give me the differences betw the 2 docs based on those key values (node attributes).
I used node('//*') for the path, and value('local-name(../.)', 'varchar(50)') as element
,value('.[not(@xsi:nil = "true")]','VARCHAR(255)') AS new_value
...etc...
but that only gives me the node names, and the child elements. It does not give me back the attribute names and values from the node itself.
Thanks in advance for your help.
ceeAre you looking for something like this:
DECLARE @myDoc1 xml
SET @myDoc1 ='<ProductDescription ProductID="1" ProductName="Road Bike">
<Features featureID = "1" featureName = "body">
<Warranty>1 year parts and labor</Warranty>
<Maintenance>3 year parts and labor extended maintenance is available</Maintenance>
</Features>
<Features featureID = "2" featureName = "seat">
<Warranty>1 year parts and labor</Warranty>
<Maintenance>2 year parts and labor extended maintenance is available</Maintenance>
</Features>
</ProductDescription>'
SELECT T.c.value('local-name(.)', 'nvarchar(50)') AS name,
T.c.value('.', 'nvarchar(50)') AS value
FROM @myDoc1.nodes('ProductDescription/@*') AS T(c)
Erland Sommarskog, SQL Server MVP, [email protected] -
Get the attributes NAME and VALUE from an XML
I really love this forum :)
I load an XML an populate a Tree, from which I start to drag
items.
the xml looks like this:
<myTag attrName="attrValue"
otherAttrName="otherAttrValue"/>
var ds:DragSource = event.dragSource;
var var1:String =(event.dragInitiator as
Tree).value.@attrName;
-> the var1 variable has now: "attrValue"
my question is.. how can I get all the attributes' names? in
this example: attrName and otherAttrName (suppose I don't know the
structure of that xml node)
what about attributes values?
thank you!The snippet below takes an xml node(nodeCur), loops over the
attributes list and builds an array that contains the attribute
name and value for each attribute. It comes from a sample app that
allows you to edit an xml file.
Sorry that the forum will remove the formatting
var aDPAttributes:Array = new Array();
var xlAttributes:XMLList = nodeCur.@*;
var attribute:Attribute;
for ( var i:int = 0; i < xlAttributes.length(); i++) {
aDPAttributes.push({name:xlAttributes [ i ]
.name(),value:xlAttributes [ i ] });
dgAttributes.dataProvider = aDPAttributes; //set the property
sheet dataProvider
Tracy -
Flat file should have source field name and value
Hi Friends
I have a scenario of Idoc to Flat file , where in the target structure the field name and value should be present, generally only the value is available in a flat file.The target structure is as below:
for e.g RECTYPE is the Field Name and A is the value.
RECTYPE,A
DATEH,20111101
TIMEH,173125
RECTYPE,B
ORDNUM,4500054536
ORDITM,150
SUPDAT,20090218
PLNQTY,000000006
MATNR,14B300
BATCH,5697
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023305
SUPNAME,Deutsche BP AG
SUPADRS,Erkelenzer Strasse 20
SUPCITY,Monchengladbach
SUPPOST,41179
SUPCOUN,DE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CRE
RECTYPE,B
ORDNUM,4500056721
ORDITM,10
SUPDAT,20090218
PLNQTY,000000013
MATNR,116703
BATCH,6589
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023380
SUPNAME,DOW Belgium NV
SUPADRS,Havenlaan 7
SUPCITY,Tessenderlo
SUPPOST,3980
SUPCOUN,BE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CHG
RECTYPE,X
DATEH,20111101
TIMEH,173125
RECORDS,3Hi,
NameA.addHeaderLine
Specify whether the text file will have a header line with column names. The following values are permitted:
■ 0 u2013 No header line
■ 1 u2013 Header line with column names from the XML document
■ 2 u2013 As for 1, followed by a blank line
■ 3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
■ 4 u2013 As for 3, followed by a blank line
This specification is only permitted if exactly one structure is defined.
regards,
ganesh. -
How to specify pairs of variabel names and values in OdiInvoke
Hi,
If you start the scenario from a web service, you are invoking the service OdiInvoke. When you look at the WSDL for this Web Service, you will notice that beyond the scenario name, version and the execution context, you can specify pairs of variable names and values. The WSDL for the web service as following:
<xsd:complexType name="SessionRequestType">
<xsd:sequence>
<xsd:element minOccurs="0" default="true" type="xsd:boolean" name="Synchronous"/>
<xsd:element minOccurs="1" type="xsd:long" name="SessionId"/>
<xsd:element minOccurs="0" default="true" type="xsd:boolean" name="KeepVariables"/>
<xsd:element minOccurs="0" type="VariableType" name="Variables" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="VariableType">
<xsd:all>
<xsd:element type="xsd:string" name="Name"/>
<xsd:element type="xsd:string" name="Value"/>
</xsd:all>
</xsd:complexType>..........
If i call this OdiInvoke web service from BPEL, From BPEL assign activity, how can i specify pairs of variable names and values? Example: i have variable 1 and value1, variable 2 and value2, how to assign them to pairs if variable names and values. so that after the assignment, the payload for assign activity in BPEL can be become as following:
<Variables>
<Name>variable1</Name>
<Value>value1</Value>
<Name>variable2</Name>
<Value>value2</Value>
</Variables>
Thanks!
SusanTry this way,
In the expression builder copy the xml fragment to the target node. This will result in the below assign action in the bpel code
<assign name="Assign1">
<copy>
<from expression="<Variables><Name>variable1</Name><Value>value1</Value><Name>variable2</Name><Value>value2</Value></Variables>"/>
<to variable="outputVaribable"/>
</copy>
</assign> -
How to pass tag name and value dynamically in the output of PCo notification?
Hi,
I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
Thanks in advance.
Regards,
SumanHi Suman/Jeedesh,
As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
For above issue, My suggestion
1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
4. And in the mean time, send those Tag details vie mail trigger or as per requirement
Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
Hope it might solve your problem
Regards,
Praveen Reddy -
Send name and value of control to subvi
Hi all
I am trying to send the names and values of controls to a subvi.
I know that I can extract the name and value of the control using a property node, but I was looking for a way to make is easy to use for the programmer.
I am thinking of some kind of bundle function, it saves the name and value of the control, but I would like the programmer to be able to connect a random number
of controls to this subvi without having to specify the number of controls anywer.
I know there is configuration file stuff in labview, but it looks a bit more complex then what I want to do.
Also i know that I can use the OpenG toolkit, but I'll rather not use any add-ons to labview, as this VI might be running on many different computers.
Hope I made my problem clear enough!
Have a nice day
Regards
Tommy
Running LabVIEW 2009 32bit SP1 on Windows 7 64Bit
Solved!
Go to Solution.tombech wrote:
Hi all
I am trying to send the names and values of controls to a subvi.
I know that I can extract the name and value of the control using a property node, but I was looking for a way to make is easy to use for the programmer.
I am thinking of some kind of bundle function, it saves the name and value of the control, but I would like the programmer to be able to connect a random number
of controls to this subvi without having to specify the number of controls anywer.
I know there is configuration file stuff in labview, but it looks a bit more complex then what I want to do.
Also i know that I can use the OpenG toolkit, but I'll rather not use any add-ons to labview, as this VI might be running on many different computers.
Hope I made my problem clear enough!
Have a nice day
Regards
Tommy
I am not sure what you have in mind Tommy but lets rule out the rediculous.
You can find a Nugget I wrote here that explains how I managed to write an Save/Restore function that will automatically adapt to a type-def'd cluster. THat Nugget include my original source code as well as a full description of what where why and how.
I have used that code in multiple applications and it has demonstrated that it works.
No not all data types are supported! I left that as an exercise for the reader.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
All listing element must have index,name and value?
when i trying to convert a fmb file to xml, it shows a warning.
All listing element must have index,name and value...
how to resolve this..
Edited by: skud on Mar 9, 2011 6:03 AMwhen i trying to convert a fmb file to xml, it shows a warning.
All listing element must have index,name and value...
how to resolve this..
Edited by: skud on Mar 9, 2011 6:03 AM -
How to show users display name and email address in open social widget?
Hello experts,
Is it possible to retrieve users display name and email address with opensocial javascript e.g. Login widget seems to load user data (and userData.firstname) during the site init. Is this something that could be consumed or is there some opensocial data request that could/should be used. Any working sample widget spec would be appreciated.
Best regards,
VilleHi Ville,
in the logon widget, we also use the data retrevied from siteInit.loadData.data.user. However, this widget is part of the out of the box openSocial widgets, it is being released with the product code, not as a separate OS widget deployed on HANA Cloud Platform.
If you'll do window.parent.siteInit you'll probably will get the data you are looking for, but this isn't the official public API, so you can use it but we cannot commit on keeping this structure.
Why do you need this information in the widget level? Does your widget require authentication or is it for personalization needs?
The best way is to retrieve this info on the java side using HAHA Cloud Platform APIs and send them back to the client.
Look at this - SAP HANA Cloud Platform SDK >
Package com.sap.security.um.user
Interface:
User
This interface provides read access to user data and is an extension of Principal.
UserAttribute
The interface represents abstraction over a user general attribute, such as an e-mail address.
UserProvider
This interface represents the service interface which provides read access to a user implementation.
Inbal -
What is the key column name and value column name in JDBC Adapter parameter
Hi
Can any one please tell me what is the Key Column Name and Key Column Value in JDBC adatper parameters. If i dont mention those parameters i am getting the following error
<b> Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Please help me
Best Regards
Ravi Shankar BHi
I am doing DataBase Lookup in XI
First i have created a Table in Database( CheckUser) which has two fields UserName and PhoneNumber and then i have created
I have created one Communication Channel For Reciever Adapter .
I have given the parameters like this
JDBC Driver : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:microsoft:sqlserver://10.7.1.43:1433;DatabaseName=Ravi;
UserName.... sa
password.... sa
persistence : Database
Database Table Name : CheckUser
Key column name and Value column name i left blank and activated
and then
I have created
Data Types : Source ...... UserName
Destination.... PhoneNumber
Message Types
Message Interfaces
In Message Mapping
I have created one User Defined function DBProcessing_SpecialAPI().This method will get the data from the database....
In this function i have written the following code
//write your code here
String query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
query = "select Password from CheckUser where UserName = ' " +UserName[0]+ " ' ";
try {
channel = LookupService.getChannel("Ravi","CC_JDBC");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("Password"));
catch(Exception e){
result.addValue(e.getMessage());
finally{
try{
if(accessor != null)
accessor.close();
}catch(Exception e){
result.addValue(e.getMessage());
And the i have mapped like this
UserName -
> DBProcessing_SpecialAPI----
>PhoneNumber
when i am testing this mapping i am getting the following error
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Dest_JDBC_MT xmlns:ns0="http://filetofilescenario.com/ilg"><phoneNumber>Plain exception:Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61)
at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98)
at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38)
at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270)
at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70)
at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</phoneNumber></ns0:Dest_JDBC_MT>
In RWB i have checked the status of JDBC driver its showing the following error
<b>Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Maybe you are looking for
-
Using Grep to change case in 2nd of a two word string
Hello all I found out after completing my project that I had made a big boo boo. I have multiple (hundreds) 2 word botanical names of plants which are all located after a certain heading style throughout 400 pages. The first word in this name is capi
-
Compiling form data: how to add FDF data?
Hi there I've created a PDF form and am testing the distribution and compilation process. I created the form in Acrobat. I suspect most of the end users will have Reader, so after having distributed it through the Acrobat wizard (to myself) I filled
-
I have a custom list called "Suggestions" with a field called 'Notes from Reveiwer'. Folks enter a new suggestion and kicks off a workflow to approvers. Approvers review the suggestions and add notes. When notes are added, I would like to have the
-
WebScan doesn´t work with iPhone browser
The C4780 web interface for scanning is very practical because no driver installation on computer is required for scanning. Just point any web browser to its internal web server, start the scanning process and download the scaned image as a regular e
-
Hallo, For a report you can declare a column as a 'Column Link'. You can define the 'Link Text', 'Target Page' and Items that should be set. How can I do this for a 'Page Item'? I have created a page with the wizard 'Form on a Table' (e.g. emp). One