Display of  icons in the items of dropdownListBox for a single item

Dear BSP Gurus,
Do you know if it is possible to display icons in the items of dropdownListBox for every single item?
To assign and display icon to buttons I do:
    lv_image->id = 'UserSelectionCancel2'.
    lv_image->src = '/sap/public/bc/icons/s_B_OKYE.gif'.
    lv_image->tooltip = ''.
    clear lv_image_string.
    lv_image_string = lv_image->IF_BSP_BEE~RENDER_TO_STRING( page_context ).
              %>
              <xhtmlb:toolbarButton id      = "<%= ywfx1_b_bcontinueWF %>"
                                    design  = "STANDARD"
                                    text    = "<%= lv_image_string %> <%= otr(YWF11/ContWF) %>"
But I could not managed to do it for the " <htmlb:dropdownListBox ...".
We have application developed in ABAP WebDynpro and there it is possible, so I want to do exactly the same with BSP.
Any idea?
Thanks in advance,
Valentin

Hallo Alexandre,
But what if I use table for defining the items?
Like:
htmlb:dropdownListBox id  = "DropDownCommands"
                  table             = "<%= application->mt_commands %>"
                  nameOfKeyColumn   = "VAL_COMMAND".."
Where "application->mt_commands" is table of strings?
Would it be some how possible?
Regards,
Valentin

Similar Messages

  • JTable : How to display an icon near the column name ?

    Hi all,
    I'd like to display an icon near the column name of my JTable when an user click on the column; the icon specify the sorting applied to the data of JTable.
    I know that i have to write a render, but how ?
    Cheers.
    Stefano

    Hi all,
    I found the solution at http://exampledepot.com/egs/javax.swing.table/IconHead.html
    Cheers anyway.
    Stefano

  • My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

    My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

  • How can I add the logo image for a single item in an RSS feed?

    Hello,
    I am an administrator of iTunes U at the University of Minnesota.
    Before transitioning new public site, we are trying to figure out how to put a logo image into RSS feeds.
    We use our server to makes xml codes to create RSS feeds for podcasts.
    We successfully put a logo image for a collection in a RSS feed, but putting a logo image for a single item did not work.
    Below is the part of the xml code for the logo image for a single item, which is created by our server. I deleted other parts of xml code for your convenience.
    <item>
    <title>Plagiarism</title>
    <itunes:image href="http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimmin g-contast.jpg" />
    <enclosure url="http://mediamill.cla.umn.edu/mediamill/download.php.mp3?file=87504.mp3" length="8544508" type="audio/x-mp3" />
    <guid>http://mediamill.cla.umn.edu/mediamill/download.php.mp3?file=87504.mp3</guid>
    <image></image>
    </item>
    We tried both <itunes:image href="http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimmin g-contast.jpg" /> or <image>http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimming-conta st.jpg</image>.
    Both did not work.
    Can anyone help?
    Thank you for your help in advance!!
    Seogjoo

    Haven't created too many podcasts, but in this one
    http://itunes.apple.com/us/podcast/connecticut-college-sculpture/id372414245
    or
    itpc://video.conncoll.edu/d/sculptures/index.xml
    before we included the audio files, we added the images in iTunes.
    Select the file, then go to File>Get Info, here you can add metadata, and in Artwork add an image.
    Then upload this file to your server. Works for audio files anyways.
    You don't see the image in the web podcast, but you do in iTunes after you download each item, in "Show item artwork" in lower left. Click on the image and it zooms out.

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • Two production  orders at the header level one for one single requirement

    Hi Gurus, Please provide me your valuable suggestion on the issue.
    *Client wants to have a only two production  orders at the header level one for one single requirement .*
    1) Manufacturing Order u2013 In this order for Finsihed prodcut system should pick all the assemblies whcih are manufactured inside i.e depending on the material type.\
    2) Assembly order u2013 In this order system should pick all the assemblies whicih need to be assembled also procured or subcontracted items in this order against depending on the material type.
    It means for Sales order of  5 EA there is going to be only 2 order ( MFG & assy order).
    For Example.
    L45-7000 is the header material now client wants only two production orders one Manufacture order and anothe Assmebly order , thet dont want to use Phantom assembly concept and also multiple production orders for  SFG.
    Please confirm if this requirement can be mapped in SAP ?
    Thanks...

    Hi Shishir,
    As soon as each order is related to only one material, if your manufactured (or purchased) assemblies are of different materials, you will have a separate order for each material rather than a single order for all manufactured assemblies. I don't thing all your assemblies are of the same material - thus I would say no, it is not possible to map your requirement.
    Regards,
    Sergiy

  • Multiple Units of Measurements for a single item

    Hi all,
    How do I maintain multiple units of measurements for a single Item/  I have a scenario where purchase orders are being made for sand in Metric Tons, Tons, Kgs and Cubit Feets.  Each measurement is being used at each construction site of the company but the item is single sand.   One more problem is here with the material reconciliation of stock since it is maintained in different units of measurement and conversion from unit to other is problematic.
    Thanks
    YSvee Reddy

    Hi YSvee Reddy ,
    Julie is correct in saying that this feature will be available in version 8.8, currently in Ramp-up.
    Please see the [8.8 landing page |https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&]for a link to the 'What's new' document.
    You can contact your LPE to discuss participation in Ramp-up.
    All the best,
    Kerstin

  • No purchase order item was generated for shipment cost item

    Hi Gurus,
    When I am creating with reference to shipment no & shipment cost type, When I  save the shipment cost, See the logs at the time saving.
    The logs are showing in red :
    No purchase order item was generated for shipment cost item.
    Message no. VY633
    Please enter a valid partner role.
    Message no. ME351
    May I know the reason for showing red logs at the time of saving. (When I check logs, it is showing red colors).
    Please advice if I miss any thing.
    Regards
    Rakesh

    Hi Rakesh,
    Your customising is incomplete. Notes 506605 & 940532 will help you on this.
    regards, david

  • Change the SWF loading text for a single presentation

    This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html

    Hi,
      I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
    When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
    But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
    And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
    Is there any workaround to correct that error?
    Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)).

  • Why is display of icons on the new tab no longer present

    At the beginning of the week I was using FF 3.6.13 on Windows XP, on Wednesday it was upgraded to Windows 7 and still using FF 3.6.13. Before W7 when in FF if I clicked on the new tab the new page was displayed with lots of icons of the most recently accessed URLs. Now when I click on the new tab it just displays a blank page. Is the display of the icons still possible in the W7 variant and if so how do I configure it as I have been through all the history options and can't find anything that looks like it does this.

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbLPY/3.12.2.16749
    See:
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Displaying an icon in the title bar of a web page

    Hi Friends,
    Pls temme how 2 display a given icon in the title bar of a web - page, i mean in the title bar of the web - browser which loads the page.
    Thanks in advance,
    Kottayam Achayan

    Hi Friends,
    Pls temme how 2 display a given icon in the title bar
    of a web - page, i mean in the title bar of the web -
    browser which loads the page.
    Thanks in advance,
    Kottayam AchayanIn web.xml, you can use the <icon> element to specify the image to be used.
        <icon>
            <small-icon><!-- Specify a 16X16 GIF or JPG --></small-icon>
            <large-icon><!-- Specify a 32X32 GIF or JPG --></large-icon>
        </icon>Hope this helps.
    Annie.

  • I can't display an icon in the tab navigation.

    Hi,
    I use the tab navigation, it's OK with text but i can display a icon. I upload the icon in APEX (Shared Components) and i populate the image section of the my std tab.
    But nothing, only the text appear.
    Thanks for your suggestions.

    Hello <unknown user>,
    I think the solution is in one (or both) of these threads:
    {message:id=2708439}
    {thread:id=327586}
    (So you have to change your template).
    Greetings,
    Roel
    http://roelhartman.blogspot.com/

  • Change number of record displayed for a single item alone

    Hi,
    I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
    i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
    Is this achievable?
    Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
    Thanks,
    Yuvaraaj.

    983448 wrote:
    Hi,
    I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
    i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
    Hamid
    Mark correct/helpful to help others to get right answer(s).*

  • Hiding icons in the Dock and 'Word for Mac'

    Hi, I'm new to macs and I'm struggling a little with some of the simpler tasks! I've put Word for Mac Student Edition on my Macbook but can you tell me how I can delete a word document once I've created it? I can't seem to find 'delete.' Also, can somebody help with hiding some of the icons in the dock. I've got loads and I know I won't use many of them.
    Thanks for your help!
    Macbook   Mac OS X (10.4.8)  

    Thanks for your quick reply! I don't have a right or left click on my Macbook just the mousepad and one bar that runs across the bottom of the pad, It makes no difference if I press the left or right hand side of it, it just keeps initialising the applications.
    I've tried dragging the document to the trash can but that won't work either! Should I be pressing a command key before hand?
    Sorry, I must have been more entrenched in windows-working than I thought....

  • How do I create a Launchpad folder for a single item?

    Some items that came with a few apps have their own folder in Launchpad  - "AppName (Other)".
    Is there a way to create a folder in Launchpad with a single item?
    I tried dragging one item to another and got a folder but as soon as I removed one of the items, the folder disappeared too.
    Thanks in advance.
    Best regards,
    Barry
    <Edited by Host>

    Hi Shootist007,
    Thanks for your response.
    Trouble is, the app is already inside a folder.  It came with another app and both are in their own folder, within the Applications folder.
    At your suggestion, I even tried placing it within its own folder, within the app's folder, within the Applications folder.  Still seeing two separate icons in Launchpad with no folder.
    Both show up in Launchpad as separate things.  What I'd like to do is have that secondary app in a Launchpad folder.
    Hi Hpr3,
    Thank you but those aren't email addresses in my signature - they're URLs.  No fear of bots.
    But thanks for the thought.
    Best regards,
    Barry
    <Edited by Host>

Maybe you are looking for