Change number of record displayed for a single item alone
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
Is this achievable?
Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
Thanks,
Yuvaraaj.
983448 wrote:
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
Hamid
Mark correct/helpful to help others to get right answer(s).*
Similar Messages
-
How to change number of records displayed in Web service: Query_view_data
Hi experts
I´m using webservice Query_view_data to fill a Xcelsius model with data.
The Bex Query contains appr. 300 records but the webservice returns only 50 records. When I test it it says "displaying 50 of 312 records".
When I tried ABAP FM RRW3_GET_QUERY_VIEW_DATA it gave all 312 records.
Does anyone know how I can change this setting so that all 312 records are displayed in the webservice?
Best Regards
KennethMani,
I have changed the properties of the chart as you said and gave 4 decimal places. If my actual data value is 0.787989, i would expect it to result 0.7879 but the outcome is 0.7800. It is replacing the other two decimal places with 0's rather than the actual number. Is this a bug in OBIEE or am i doing anything wrong?? Is there any other way to do this. Please let e know...
Thanks,
vnk
Edited by: user8708843 on Aug 18, 2010 8:03 AM -
How to set the number of records displayed at run time
Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!
Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica -
Rows Per Page doesn't affect the number of records displayed
I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
Has anyone else experienced this problem?
TonyYes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
Report Template
Pagination Scheme
Enable Partial Page Refresh
Display Position
Number of Rows/Number of Rows Item
Maximum Row Count -
Change the SWF loading text for a single presentation
This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html
Hi,
I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
Is there any workaround to correct that error?
Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)). -
Display of icons in the items of dropdownListBox for a single item
Dear BSP Gurus,
Do you know if it is possible to display icons in the items of dropdownListBox for every single item?
To assign and display icon to buttons I do:
lv_image->id = 'UserSelectionCancel2'.
lv_image->src = '/sap/public/bc/icons/s_B_OKYE.gif'.
lv_image->tooltip = ''.
clear lv_image_string.
lv_image_string = lv_image->IF_BSP_BEE~RENDER_TO_STRING( page_context ).
%>
<xhtmlb:toolbarButton id = "<%= ywfx1_b_bcontinueWF %>"
design = "STANDARD"
text = "<%= lv_image_string %> <%= otr(YWF11/ContWF) %>"
But I could not managed to do it for the " <htmlb:dropdownListBox ...".
We have application developed in ABAP WebDynpro and there it is possible, so I want to do exactly the same with BSP.
Any idea?
Thanks in advance,
ValentinHallo Alexandre,
But what if I use table for defining the items?
Like:
htmlb:dropdownListBox id = "DropDownCommands"
table = "<%= application->mt_commands %>"
nameOfKeyColumn = "VAL_COMMAND".."
Where "application->mt_commands" is table of strings?
Would it be some how possible?
Regards,
Valentin -
How can I add the logo image for a single item in an RSS feed?
Hello,
I am an administrator of iTunes U at the University of Minnesota.
Before transitioning new public site, we are trying to figure out how to put a logo image into RSS feeds.
We use our server to makes xml codes to create RSS feeds for podcasts.
We successfully put a logo image for a collection in a RSS feed, but putting a logo image for a single item did not work.
Below is the part of the xml code for the logo image for a single item, which is created by our server. I deleted other parts of xml code for your convenience.
<item>
<title>Plagiarism</title>
<itunes:image href="http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimmin g-contast.jpg" />
<enclosure url="http://mediamill.cla.umn.edu/mediamill/download.php.mp3?file=87504.mp3" length="8544508" type="audio/x-mp3" />
<guid>http://mediamill.cla.umn.edu/mediamill/download.php.mp3?file=87504.mp3</guid>
<image></image>
</item>
We tried both <itunes:image href="http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimmin g-contast.jpg" /> or <image>http://picture.funnycorner.net/funny-pictures/6041/dolphin-vs-cow-swimming-conta st.jpg</image>.
Both did not work.
Can anyone help?
Thank you for your help in advance!!
SeogjooHaven't created too many podcasts, but in this one
http://itunes.apple.com/us/podcast/connecticut-college-sculpture/id372414245
or
itpc://video.conncoll.edu/d/sculptures/index.xml
before we included the audio files, we added the images in iTunes.
Select the file, then go to File>Get Info, here you can add metadata, and in Artwork add an image.
Then upload this file to your server. Works for audio files anyways.
You don't see the image in the web podcast, but you do in iTunes after you download each item, in "Show item artwork" in lower left. Click on the image and it zooms out. -
Multiple Units of Measurements for a single item
Hi all,
How do I maintain multiple units of measurements for a single Item/ I have a scenario where purchase orders are being made for sand in Metric Tons, Tons, Kgs and Cubit Feets. Each measurement is being used at each construction site of the company but the item is single sand. One more problem is here with the material reconciliation of stock since it is maintained in different units of measurement and conversion from unit to other is problematic.
Thanks
YSvee ReddyHi YSvee Reddy ,
Julie is correct in saying that this feature will be available in version 8.8, currently in Ramp-up.
Please see the [8.8 landing page |https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&]for a link to the 'What's new' document.
You can contact your LPE to discuss participation in Ramp-up.
All the best,
Kerstin -
Change log issues-2 images for a single requests
Hi ,
in change log table for a single request i found 2 before images and two after images, is this normal behaviour if not when can we see the such type of scenarios.
because it leads to zero records when it isn updated in to the further data targets.
thanks.the listener is NOT involved with any existing session.
stopping & restarting the listener has NO impact on existing sessions.
I suggest it is better to control network access to any system using a Firewall which is the best tool for this task.
Yes, it is possible to have more than 1 listener. It is also possible to poke yourself in the eye with a sharp pencil.
I suggest that you should avoid both of these possible activities.
Simply put having multiple listeners is wrong for multiple reasons & should be avoided. -
Automatic Number of record displayed
hi to all,
how can i insert automatic number record displayed on a detail data block.
e.g :
If i input 5 on a text box and press a button the detail will display on 5 records.But during form load initially it has Zero rows dislayed.You can use the set_block_property method in the when-button-pressed trigger of your button.
set_block_property('block_name',MAX_RECORDS_FETCHED,'<block_name>.<text item where you'll enter the no of rows to display>);
go_block('block_name');
Ensure that Query all records property of the block is set to Yes for the above to work.
Hope this helps.
Please mark answer as helpful / correct, if it helps you -
How To get the number of request's for a single Composite Application
Hi can any body tell how to get the number requst's for a single composite application.
Thanks
ManiHi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay -
Number of "rows" displayed for Drag and Drop items
Where do I set the number of rows displayed in my databound objects in UIX/ADF/Struts (Tables, LOV, searches, etc...)? I remember this being an option in the Preview, but I just can't find it now.
Mike,
do you mean the range size?
Select the UIModel.xml file and open the Structure window. Select the RowSetIterator and open the Property Inspector.
Frank -
Data upload:F-02: each documnet number to be generated for each line item
Dear ABAP experts,
I have a requirement.
When we uplaod customer or vendor invoices ,a document number will be generated or posted.
Similarly, my requirement is :When I do the same kind of uploads, for each line item in an excel file each document number has to be generated or posted .This upload is using Tcode: F-02.
How do I generate each document number for each line item (for each vendor or customer).
Please do the needful.Either send me a sample code or an idea how to proceed.
Thanks,
Hema.Hi,
using below code you can generate document number for each line Item.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
IF wa_final-field1 NE c_space.
convert date to user format
MOVE wa_final-field1 TO v_date.
CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
EXPORTING
if_date = v_date
IMPORTING
ef_date = v_date1.
PERFORM bdc_field USING 'BKPF-BLDAT'
v_date1. " Document Date
Clear v_date field
CLEAR: v_date1 , v_date.
ENDIF.
PERFORM bdc_field USING 'BKPF-BLART'
wa_final-field4. " Document Type
PERFORM bdc_field USING 'BKPF-BUKRS'
wa_final-field2. " Company Code
IF wa_final-field3 NE c_space.
convert date to user format
MOVE wa_final-field3 TO v_date.
CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
EXPORTING
if_date = v_date
IMPORTING
ef_date = v_date1.
PERFORM bdc_field USING 'BKPF-BUDAT'
v_date1. " Posting Date
Clear v_date field
CLEAR: v_date1 , v_date.
ENDIF.
PERFORM bdc_field USING 'BKPF-WAERS'
wa_final-field5. " Currency
PERFORM bdc_field USING 'BKPF-KURSF'
wa_final-field6. " Rate
PERFORM bdc_field USING 'BKPF-XBLNR'
wa_final-field7. " Reference
PERFORM bdc_field USING 'BKPF-BKTXT'
wa_final-field8. " Document Header Text
PERFORM bdc_field USING 'RF05A-NEWBS'
wa_final-field9. " Cr.Posting Key
PERFORM bdc_field USING 'RF05A-NEWKO'
wa_final-field10. " Cr.Vendorcode or GL Account
PERFORM bdc_dynpro USING 'SAPMF05A' '0302'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-HKONT'
wa_final-field11. " Dr.Alternative Recon A/c
PERFORM bdc_field USING 'BSEG-WRBTR'
wa_final-field12. " Dr.Amount in Document Currency
Begin of changes by someshwar
IF v_field5 NE 'jpy' OR v_field5 NE 'JPY'.
TRANSLATE v_field5 TO UPPER CASE.
IF v_field5 NE 'JPY'.
PERFORM bdc_field USING 'BSEG-DMBTR'
wa_final-field13. " Dr.Amount in Local Currency
ENDIF.
Changes end
PERFORM bdc_field USING 'BSEG-GSBER'
wa_final-field14. " Dr.Business Area
PERFORM bdc_field USING 'BSEG-ZTERM'
wa_final-field15. " Dr.Payment Terms
IF wa_final-field16 NE c_space.
convert date to user format
MOVE wa_final-field16 TO v_date.
CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
EXPORTING
if_date = v_date
IMPORTING
ef_date = v_date1.
*Begin of changes by someshwar
IF wa_final-field16 NE '00000000'.
PERFORM bdc_field USING 'BSEG-ZFBDT'
v_date1. " Dr.Baseline date
ENDIF.
*Changes end
Clear v_date field
CLEAR: v_date1 , v_date.
ENDIF.
*Begin of changes by someshwar
IF wa_final-field17 NE ''.
PERFORM bdc_field USING 'BSEG-ZLSCH'
wa_final-field17. " Dr.Payment Method
ENDIF.
*changes end
PERFORM bdc_field USING 'BSEG-ZUONR'
wa_final-field18. " Dr.Assignment
PERFORM bdc_field USING 'BSEG-SGTXT'
wa_final-field19. " Dr.Text
*Perform Save posting
PERFORM save_post.
ELSE.
PERFORM bdc_dynpro USING 'SAPMF05A' '0302'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-HKONT'
wa_final-field11. " Dr.Alternative Recon A/c
PERFORM bdc_field USING 'BSEG-WRBTR'
wa_final-field12. " Dr.Amount in Document Currency
*Begin of changes by someshwar
IF v_field5 NE 'jpy' AND v_field5 NE 'JPY'.
TRANSLATE v_field5 TO UPPER CASE.
IF v_field5 NE 'JPY'.
PERFORM bdc_field USING 'BSEG-DMBTR'
wa_final-field13. " Dr.Amount in Local Currency
ENDIF.
Changes end
PERFORM bdc_field USING 'BSEG-GSBER'
wa_final-field14. " Dr.Business Area
PERFORM bdc_field USING 'BSEG-ZTERM'
wa_final-field15. " Dr.Payment Terms
IF wa_final-field16 NE c_space.
convert date to user format
MOVE wa_final-field16 TO v_date.
CALL FUNCTION '/SAPDII/SPP05_CONVERT_DATE'
EXPORTING
if_date = v_date
IMPORTING
ef_date = v_date1.
PERFORM bdc_field USING 'BSEG-ZFBDT'
v_date1. " Dr.Baseline date
ENDIF.
Clear v_date field
CLEAR: v_date1 , v_date.
ENDIF.
PERFORM bdc_field USING 'BSEG-ZLSCH'
wa_final-field17. " Dr.Payment Method
ENDIF.
PERFORM bdc_field USING 'BSEG-ZUONR'
wa_final-field18. " Dr.Assignment
PERFORM bdc_field USING 'BSEG-SGTXT'
wa_final-field19. " Dr.Text
*Perform Save posting
PERFORM bdc_field USING 'RF05A-NEWBS'
'40'. " Cr.Posting Key
PERFORM bdc_field USING 'RF05A-NEWKO'
'999996'. " Cr.Vendorcode or GL Account
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'BU'.
*& Form BDC_TRANSACTION
FORM bdc_transaction USING p_tcode.
DATA: l_v_string TYPE string.
REFRESH i_messtab.
CALL TRANSACTION p_tcode USING i_bdcdata
MODE g_mode
UPDATE 'S'
MESSAGES INTO i_messtab.
IF NOT i_messtab[] IS INITIAL.
READ TABLE i_messtab WITH KEY msgtyp = 'E'.
IF sy-subrc EQ 0.
LOOP AT i_messtab.
IF i_messtab-msgtyp = 'E'.
PERFORM fill_error_table USING i_messtab-msgtyp
i_messtab-msgid
i_messtab-msgnr
i_messtab-msgv1
i_messtab-msgv2
i_messtab-msgv3
i_messtab-msgv4.
ENDIF.
ENDLOOP.
v_error = v_error + v_count.
ENDIF.
READ TABLE i_messtab WITH KEY msgtyp = 'S' msgnr = 312.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM t100 WHERE sprsl = sy-langu
AND arbgb = i_messtab-msgid
AND msgnr = i_messtab-msgnr.
l_v_string = t100-text.
REPLACE '&' WITH i_messtab-msgv1 INTO l_v_string .
PERFORM fill_error_table USING i_messtab-msgtyp
'ZMSG_FI'
'025'
i_messtab-msgv1
wa_final2-field2
v_success = v_success + 1.
ELSE.
LOOP AT i_messtab.
IF i_messtab-msgtyp = 'S'.
PERFORM fill_error_table USING 'E'
i_messtab-msgid
i_messtab-msgnr
i_messtab-msgv1
i_messtab-msgv2
i_messtab-msgv3
i_messtab-msgv4.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
CLEAR : t100 , l_v_string .
ENDFORM. " BDC_TRANSACTION
Regards,
Siva. -
How to store lead-time and price per MPN for a single Item
We are probably one of the only CEM's that use Oracle Applications in a one-to-one MPN-IPN (Oracle Item Part Number) relationship. We do not currently store multiple Manufacturers under a single Item. Rather, we use the Customer Item Cross Reference to rank the customer's AML, with each IPN tied to a single MPN.
We are looking at moving into a one-to-many "world" in Oracle but are not sure how we can handle different pricing, lead-time, preference, status (prototype, production, obsolete, do not use), etc. for each Manufacturer's Part Number under a single Item. How are other CM's handling this???Hi Greg,
Unfortunately, DIAdem Datafinder doesn't really support much in the way
of Date/Time search outside of the File Level Creation Date property.
In order to make the creation time of the Channels searchable you would
want to create some custom properties (or use the existing RegisterInt1
- RegisterInt6) to define your own searchable properties.
For example, since you know that you have one TDM file per day, you can
start your search by find the desired day on the File Property Level,
searching the "Creation Date" property. When you store your TDM
properties, you could store the hour creation as an integer (and
thereby searchable) in one of the RegisterInt properties of the
channel, or create your own custom "Hour" channel. You could similarly
save the minute and second property in their own custom properties.
Then, since you're saving integer values, you can then search those
values to determine the time that the channel was created.
I realize that this isn't ideal or elegant, as in total it requires 4
searches (date, hour, minute, second). But that is the most
straightforward way of searching your channels by creation date/time.
Hope this helps Greg, let me know if you have any other questions.
Dan Weiland -
How do I create a Launchpad folder for a single item?
Some items that came with a few apps have their own folder in Launchpad - "AppName (Other)".
Is there a way to create a folder in Launchpad with a single item?
I tried dragging one item to another and got a folder but as soon as I removed one of the items, the folder disappeared too.
Thanks in advance.
Best regards,
Barry
<Edited by Host>Hi Shootist007,
Thanks for your response.
Trouble is, the app is already inside a folder. It came with another app and both are in their own folder, within the Applications folder.
At your suggestion, I even tried placing it within its own folder, within the app's folder, within the Applications folder. Still seeing two separate icons in Launchpad with no folder.
Both show up in Launchpad as separate things. What I'd like to do is have that secondary app in a Launchpad folder.
Hi Hpr3,
Thank you but those aren't email addresses in my signature - they're URLs. No fear of bots.
But thanks for the thought.
Best regards,
Barry
<Edited by Host>
Maybe you are looking for
-
IPhone 5 proximity sensor not working! (iOS 6.0.1)
iPhone 5 proximity sensor not working! (iOS 6.0.1) When I call , the screen is not locked(
-
Lots (2.24GB) of "Other" content on my 16GB 4S
I've got a 2+yo 16GB 4S (I know, how pathetic and behind the times am I), and on my last sync, I noticed there was 2.24GB of "Other" content on it. I've had around 1.8/1.9GB Other content on it for a while, but since upgrading to iOS 8.0.2 last week,
-
Problems printing from other programs after printing using Word automation
I have an application that uses ActiveX to build a Word document. My print VI is attached. The problem that users are reporting is that after printing a report with my application, they can't print from any other programs until they restart their com
-
Hi I just lost my brand new laptop in a taxi. Can it be tracked? Thanks.
Hi I just lost my brand new laptop in a taxi. Can it be tracked? Thanks.
-
Question on connect time failover ?
ADDRESSES: TCP/IP Host : EDTDR6P1.us.oracle.com Port : 1521 Connect-Time Failover and Client Load Balancing Configure whether addresses are tried randomly or sequentially during connections to the service. This setting iis applicable only if there ar