Display planned data heirarchywise

hi,
I have created a planning application based on standard Balance Sheet Planning.
I am planning on individual GL Accounts.For GL Account there exists an heiarchy.
I have created different levels restricted on heirarchy.
Like,for sales there are gruop of GL Accounts forming one heirarchy.
Now after planning i want to see at the company code level ,heirarchywise.
My problem is if i restrict on heirarchy for sales at the level and in layout if i give GL Account as lead then it shows me planning GL Accountwise.All the GL Accounts are concerning sales.
It give in this manner:
Company      GL Account     Amount
TCL      800000          100
TCL      800009           200
These GL Accounts are related to sales.
Now if i keep GL Account as header then it takes only on value of GL.It gives following output:
TCL     800000           100
But i want to make it display as follows:
TCL     Sales       300
where Sales i the name of heirarchy on which it is restricted.
Any suggestion would be greatly appreciated.
Thanks in advance.
regards,
Anuj

Hi,
I don't know whether you want to do that in a planning layout or in a Query.
See below my to answers:
BPS Layout) You wouldn't be able to do it in a Layout because a layout always displays cells that can be stored in an infocube. If you were to plan a node...were the hell could it be stored. You could however display the node value if you select display hierarchy when you create the layout. However the lowr nodes (characteristics will also appear). If you use excel to display layouts it can be easily compress or expanded.
BW Query) You can't display any characteristic as a hierarchy. Simply from the query definition..right click into your characteristic and activate the hierarchy display selecting a hierarchy. Also select the levels you want to display.
Cheers,
Alberto

Similar Messages

Display Planning data (for demand planning) in another UoM

Hi All,
The Planning area UoM is in "L". We have products whose base UoM is KG and some in L. In BW we convert all to L and load into Planning area.
The Product master is CIFed to APO and has the conversion between L and KG.
we have a requirement to view the planning data in Kilo tons i.e 1,000,000 KG.
Have maintained a Mass UoM called ZKT in CUNI transaction and maintained the conversion that 1ZKT = 1,000,000 KG. Also have defined an ISO code for the same.
Now when we load the data in the planning book the default UoM is L. When we go to user setting and maintain alternate UoM as Tons "TO", the system converts the data to tons and displays it. no matter what is the criteria used in header selection.
But when we try to display data as ZKT UoM get a error msg that conversion from L to ZKT is not possible as the conversion is not maintained in Product master.
But when we select material code (SKU) as the show condition and also in the filter condition use material code (SKU) and make a selection, the system converts the planning data from L to ZKT.
The question is when the system can convert L to TO at any character level as long as the product master has the L to KG conversion, why is not able to convert L to ZKT.
Why is the system able to convert L to ZKT for individual SKU's and only when the show condition is Material code (SKU).
Would appreciate your quick reply.
Thanks,
Nitin

Hi Nitin,
We have same scenario right away in our system. Some of our material have a conversion in R/3 for example: 1Unit=10BULTOS, then CIFing into APO.
The scenario is that, once we planned already in APO- we dont want to go back in r/3, any changes should be remained in APO. What we did is that we maintained the CIF user setup. Maybe you can try this as well without affecting other Uom.
Cheers!

No Authorization Error message while displaying plan data in the layout

I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
Latha

Hi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank

Regarding planning data not available in reports

HI SdN,
In my reports I'm populating actual data and planning data.But as of now we have only actual data display's in our report.what we are doing is we are populating data in BW and analysing on the base of the product cutomer (compounded) combination which is coming from r/3.(groups and sub-groups which we are entering at r/3 )
So our report shows us on the base of groups and sub groups which we are entering at r/3 level.That all is working fine but our customer wants that planning data is also displays in the reports as of now it is showing not assigned values in report.
so my question is ,To display planning data for group and sub groups provided by r/3 on the basis of product and customer (though other reports are showing planning data) , I know that I need to include this compounded infoobject in bps cubes but shall I also need to consider this in the BPS functions?I'm confused here and not sure about this.
And is that mandatory to have that componded infoobject mapped from underlying ods for customer.Because as of now planning cube is only updated with BPS functions?
Could you pls advice?
R

Hi Rubane
If the actuals and planning data are in seperate cubes then you will need to create a multi over both cubes to report on them together. However your BPS planning must be done against the same infoobject for you to be able to report on them together. If you are planning against the same IO the groupings from R3 will apply.
Also include the infoobject 0REQUID as a characteristic restriction and restrict it to variable 0S_RQMRC (Most Current Data)
Josh

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

How to display planned movement date and actual movement date together?

Hi, Professionals,
My purpose is to list delayed outbound deliveries.
Anyone could tell me how to display planned movement date and actual movement date?
Appreciate your help.

Thanks Shiva.
I tried another way to do it. It works only for a short period of time.
By using VL06O, I list all outbound deliveries by limiting both planned goods movement dates and actual goods movements dates to the same week I would like to inspect. Say both from 7th/11 to 14th/11.
then I list outbound delivery list with planned goods movement date to 7th/11 but left out actual goods movements dates this time.
In excel, I compare those two lists and filter out those unique ones because those unique documents means delayed deliveries which cannot delivery according to planned date.
However, the "delayed" list generated by this method has some noises. Not all of documents are really delayed although most of them do.
I'm also looking for a way to list sales documents number of these delayed delivery documents so i can retrieve order details from it such as order value.
Help still needed.

Excel 2007 error when displaying GL Planning Data (GP12NA)

Dear All,
T-code:GP12NA
When i display the GL Planning Data using the integration with office excel 2007, the cell automatically becomes to date and time format on the value field.
But when i display using integration with office excel 2003, the GL Planning data is displayed correctly.
Appreciate if someone could address me on this issue.
Many thanks.

Hi Jason,
I did not able to solve the problem.
Alternatively, I created 2 planning layout assigned to one planning profile.
1. Layout 1 - Integrated with excel (tick)
I used this layout for for uploading GL planning figures using the t-code GLPLUP.
2. Layout 2 - Integrated with excel (do not tick)
To display the GL Planning figures, i used this profile in t-code GP12NA. By this way, the figures are correctly displayed without any formatting error.
I assume this due to patches that needs to be upgraded in order display excel 2007 correctly.
Please reply me if you need further clarification.

Query not displaying updated data for planning

Hi Experts!
I've created a revaluation function in IP and tested it in the modeler, it's working fine. I have an issue when running the sequence in WAD, as it is not displaying the modified data. The message says that the records were modified, but those changes aren't being displayed in the query. The query being used isn't input ready, it just takes data from the cube and revaluates them.
I have already tried adding a refresh command in WAD, but I've found out it doesn't fit this purpose. Am I missing a configuration so it can read the delta buffer? or must I necessarily save the plan data for it to be displayed? Any ideas?
Thanks in advance for your help,
Al

Hi,
you are on the save side if you use an input-ready query and a button representing the revaluation function in the Web Application Designer (WAD) . Of course the function has to change data via an aggregation level A on a real-time cube C that is also contained in the InfoProvider P used to create the input-ready query. In the most straightforward case A = P.
Input-ready queries always know about the most-recent data, i.e. data in all green + yellow requests and the data in the deltabuffers.
But even a 'reporting' query e.g. on a real-time InfoCube C and the revaluation planning function on an aggregation level A on C should know about the most-recent data as defined above.
You can check the 'Requeststatus' used in the 'reporting' query. It should be 'Real-time InfoCubes up to current version'. This setting can be found - depending on the release - in transaction RSRT or the Query Designer.
You should not forget to do some simple checks: Maybe the function has changed data that are not contained in the filter of the query.
Regards,
Gregor

Displaying Actual & Planned Data

Hello,
I need to create a query which is built on a MultiProvider. This m/p looks at 2 Infocubes for it's data - one i/c containing actual data the other containing planned data.
The query I need to create should have account numbers in the rows, but the more complicated requirement relates to the columns.
In the columns I need to display the periods of the year. Within each period, I need to display the credit & debit posting values.
The above can be created easily enough, but the issue I have is how to display the actual data for the periods that have actual data and then just display the planned data for the remaining periods.
The problem relates to the Planned data InfoCube as this contains "old" planned data for periods where we now have Actual values.
Can anyone suggest anyway of doing this?

Hi Mark,
Dont you have any characteristics to differentiate the planning numbers from last month any current month. Say, how do you differentiate the plan numbers April, planned in Feb & Mar?
Anyways, the solution I can think of is to create the Actuals as selection in the Key Figure structure and restrict the period by the 1st of Jan, (Entered Year by User) to Either Current Date or if year entered is last year then 31st Dec, (Enetered Year by user).
Say, user enters 2007, in that case Actuals will be restricted by 001/2007 to 012/2007. If user enters 2009, in that case restrict the period by 001/2009 to 003/2009. For the same cases, Plan can be restricted by 001/1000 to 001/1000 if 2007 is entered (any previous year) or if current year is entered, restrict by current period (004/2009) to end of the year (012/2009).
I know this customer exit will be tricky, but that will solve your problem.
Thanks,
Danny.

After closing request plan data are not longer displayed

Hello all,
guess it's a standard problem but can't find a solution in the forum.
Scenario:
I created a planning cube and an aggregation level with two key figures, a workbook
based on the planning cube and a cube with actual data. The workbook showed the
the actual data and the so far entered plan data, so everything worked fine, but after closing the request
in the plan cube manually by switching to loading and back, the workbook doesn't show the plan data anymore.
Planning is not finished, so its necessary to see the already planned values.
Thanks
jg

Hi,
I think this is an inconsistency of the OLAP cache used in the plan buffer. Clear the cache of the plan buffer query via RSRT or RSR_CACHE. The plan buffer query has the following technical name
- IC/!!1IC if the input ready query is defined on an aggregation level on the InfoCube or on a multiprovder that contains an aggregation level as partprovider that is defined on InfoCube IC
- MPRO/!!1MPRO if the input ready query is defined on an aggregation level on the multiprovider MPRO
For a final solution earch for notes in the area of OLAP and OLAP cache in connection with planning.
Regards
Gregor

Problem with Exception Worksheet using Data from Supply Plan Data Table

I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AM

Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

How to get the user log from the entried planning data ???

Dear All,
Could you help me to give the suggestion regarding that please .. ?? :).
I have requirement to get the last user who in charge in modifying the planning data.
Or in the other words, i'm gonna get the log from the entried planning data.
e.g.
1. Phase 1 - My Friend:
Create the planning data :
Country           Sales
INA                 $1000
2. Phase 2 - I update it and create new record.
Country           Sales
INA                 $1500          < modified >
USA                $400           < new >
Could i get the log from those records ??
The log can be contain:
the created user       &   modified user ??
I just read the article regarding status and tracking system in BPS, but could i cover that requirement ??
(Because i got that the status and tracking system for creating a workflow for planning).
Or ..
Is there other way that can fulfill this requirement ???
Really need your guidance all.
Regards,
Niel.

Dear Mayank,
Tks a lot for your responses.
I've tried it but in BPS version..
I saw in the document there is GUID (unique ID), could you explain me what the objective is ???
I work out to plan to store the user created, date created, and planning level information in the log data.
What do you think ..
Is it better to display them in the BEx Report / another manual planning layout ???
What did you display the log data in your case ??
Still need your guidance ..
Really - really thanks.
Niel.

Last Yr Plan Data Vs Current yr Plan Data

Hi gurus,
Cd some one tell me when we are into a situaion where need to compare Plan Values Vs Last Yr and Current Yr,
1. How we are going to do this.
2. How Versions will be differentiated?
3. Will be Plan Valus of Last Year still can be changed or else they will be in
Display Mode. For me it does not make sense to change Last Year Plan Data.
Thanks a lot for all your kind inputs.
Quick assistance is highly appreciated.
Regards,
BI-IP Guest

Hi ,
I think u can take a multiprovider on three cubes in which
1.)The last year content will be in the standard infocube (b'coz according to any business data can be changed within a particular time limit)
2.) The current year's content also u have to put in standard infocube
3.) The plan data u can put in real time infocube on which u can define aggregation level and planning function and sequences.
now u can report on the multiprovider by which u can compare the data on the respective three years.
Regards,
Supriya

Plan data in special ledger in company code curremcy

Hi,
I am posting plan data to a special ledger but it is very estrange because I post it in KP06 transaction, I enter data in EUR but when I display my Special ledger line items I appears as transaction Currency the company code currency, not EUR
Is it a customizing problem?
Thank you very much

Yes, this option is active and when I post FI documents for example, the special ledger document appear in the transaction currency.
The proble is that in KP06 when I plan in EUR the special ledger line item has in transaction currency value in USD,that is tyhe company code currency, instead of the transaction currency that I have used (EUR)
Do you understand me?

Attribute Dimension members in Planning Data form

Hi All,
Can we see Attribute dimension members in Planning data form ? Pls. help

Yes it is possible in 11.1.1.3, for example in your row select a dimension that has attributes associated with it. select dimension properties next to the down drop.
Tick "Enable custom attribute display (setting applies to all dimensions with associated attributes): "
Select the attribute dimension
Cheers
John
http://john-goodwin.blogspot.com/

Display planned data heirarchywise

Similar Messages

Maybe you are looking for