Display recent value on operand

Hi,
On the rate category facts if I check price operand it shows the old time slice value instead of active ones.
Then If I go to EA91 and check the price under history tab it shows the correct ones.
From billing stand point everything is Ok. My concern is only related to display of active value
If anybody has an idea on this . Pls suggest
Thanks

So as per your response every time if we are making any changes to the price then we also need to update the operand time slice.
Otherwise it will always show the older value.
So what is the usually way to handle operand value when we are making any changes to the price
Thanks for your help !!

Similar Messages

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

Displaying the value of an variable on the stage

I have managed to display the values contained in string variables on stage, and I am happy with that, however when I wish to display the value of an int and convert it to a string as one is supposed to do the output to the stage just calls it [class int] and does not give its value. any suggestions?
My rogram contains a stage at frame 1 which displays a word. The user must input a word. Frame 30 then displays the word which was displayed and the word input by the user. That all works fine. But the value of the variable NumberRight, which has been assigned to that variable will only display as [class int] without showing its value. (even though I have converet it to a string using the .to string function you see below).
My code is as follows;
trace( "The number correct was" + NumberRight); //This works fine in the output window and shows the value of the variable as NumberRight [class int]1 (showing the value to be 1)
outputText.appendText("in/"+textAtIN); //this works fine displaying the word presented and word input by user as in/in
outputText.appendText( NumberRight.toString(     )); //here lies the problem as it just displays [class int] and nothing else.
Yes I have managed to overcome that problem it was some code on the first frame, please excuse, however, now, is there any way to remove the [class int] bit from the displays, I wish to have the results as a clear copy of the results so that they can be printed out, without [class int] all over the place?

Hi Ned thanks for that. Yes I had accidently created blank spaces in the String() argument. (wanted to check if there was a subsequent difference in display and forgot to return them to normal ...Sorted )
Your next suggestion has eliminated the [class int] but I get a value now of 0.
My code on the first frame for a correct response for example is;
function keyPressedIN(event:KeyboardEvent):void
          if (event.keyCode == 13)/*Normally,this will move straight on to the next frame-
          recording a correct response and all that that implies in terms of scores etc. But now I have re directed it to Frame 30 to check are the variables working properly*/
                    //insert code for correct responses vowels etc.
                    VowelI = VowelI+1;
                    NumberRight = NumberRight +1;
                    stage.focus = stage;
                    //There is no need to display the text box as this is a correct response.
                    pupilsResponseIN.visible = false;
                    mainText.visible = false;
                    gotoAndPlay(30);//at the moment this takes me to the display frame to check if all is ok
On the first frame when the user say hits the Return key my code assigns the value of +1 to the variable; eg
NumberRight=NumberRight+1;
and the value of +1 to the value of VowelI
VowelI=VowelI+1
At Frame 30 the code is as follows;
stop();
trace( "The number correct was"+ NumberRight);
outputText.appendText("in/"+textAtIN);
outputText.appendText( "\n");
outputText.appendText("Vowels Correct ="+(int(VowelI).toString()));
outputText.appendText( "\n");
outputText.appendText("TotalCorrect="+(int(NumberRight).toString()));
//outputText.appendText( VowelI.toString());
Now what I am getting is
in/in
Vowels Correct = O
Total Correct = O
Yet the trace (output box) records the Number correct as [class int]1
many years ago I wrote this same program in Authorware using similar code. I am trying to re write it in FlashCS5 using ActionScript 3 and It take days to solve small problems. I notice also that If for example the user of the program makes an error and I record the error as NumberRight =NumberRight -1 the program records it as Total Correct = NaN .
I gave up on this a few months back but I am trying again. I think there must be a better way to do this. Variables do not seem to add up or subtract for me at present. no doubt its me thats got it wrong.

Form displays NULL values

A page is using PL/SQL script to display data. There are 2 display variables. Instead of bringing initial set of data, it displays NULL values. It "fixes" itself after changing variable values from a drop down menu. Why is that and how to fix it?

If you plan on performing all of the work under the Click event, then you won't need to worry about assigning a Script scope to the variables, but if you are planning on using those variables outside of the Event, then David's answer is the way to go.
Another option is to use a hash table as it also works around the issue with variable scope in a UI Event.
#Define at beginning of script
$hashtable = @{}
$OKButton.Add_Click({$hashtable.SelectedTemplate=$Something})
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

Displaying default value for a field in ALV table

Hai all,
 I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
 I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
 bill_details ?= <wa_row>-r_value.
 IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
 lo_el_bill_detail->set_attribute(
 EXPORTING
 name = 'REQ_NUMBER'
 value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
 name = `REQ_NUMBER`
 value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

How to display the values stored in the database in the combobox on load?

I am develping one application where in
I wanted to display the values in the combobox which I am taking from the database and in the same form passing that value in same form after selecting it,My program is running fine for the first time but next time it is giving me NullPointerException.
So can anyone tell me please how I should develop the this application to avoid this exception?
Thank You
Praddy

Thanx a lot for showing interest in answering my query.I am pasting my code for ur reference.Please try to reply ASAP.
Thank You,
Praddy.
CODE:
======
<html>
<head>
 <script language="javascript">
 function submitthisform(thisForm)
 thisForm.submit();
 </script>
</head>
<body>
<form method=post name=samepgm>
Select City: <select name=city onChange='submitthisform(samepgm)'> 
<option value=''></option>
<option value='All'>All</option>
<%@ page language="java" import="java.sql.*" %>
<%
 String scity = request.getParameter("city");
 System.out.println(scity);
 Connection con = null;
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 con = DriverManager.getConnection("jdbc:odbc:property","","");
 Statement st = con.createStatement();
 ResultSet rs1 = st.executeQuery("select distinct hcity from housefinance");
 while(rs1.next())
 //String ohname = rs1.getString("hname");
 String ocity = rs1.getString("hcity");
 //out.println(ohname +" ");
 out.println(ocity +" ");
%>
 <option value='<%=ocity%>'><%=ocity%></option> 
<% }
 rs1.close();
 if(scity.equals("All"))
 ResultSet rs2 = st.executeQuery("select * from housefinance");
 while(rs2.next())
 String ohname = rs2.getString("hname");
 String ohadd1 = rs2.getString("hadd1");
 //String ohadd2 = rs2.getString("hadd2");
 String ohcity = rs2.getString("hcity");
 String ohpcode = rs2.getString("hpcode");
 String ohtelno = rs2.getString("htelno");
 String ohfaxno = rs2.getString("hfaxno");
 String ohemail = rs2.getString("hemail");
 String ohmobile = rs2.getString("hmobile");
%>
<pre>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
</pre>
<%
 else
ResultSet rs = st.executeQuery("select * from housefinance where hcity like '%"+scity+"%'");
 while(rs.next())
 String ohname = rs.getString("hname");
 String ohadd1 = rs.getString("hadd1");
 //String ohadd2 = rs.getString("hadd2");
 String ohcity = rs.getString("hcity");
 String ohpcode = rs.getString("hpcode");
 String ohtelno = rs.getString("htelno");
 String ohfaxno = rs.getString("hfaxno");
 String ohemail = rs.getString("hemail");
 String ohmobile = rs.getString("hmobile");
%>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
<hr>
<% }
%>
</select>
</form>
</body>
</html>

How can i display recent update/delete/insert records in form

Hai !!!!
i am new for forms,.......any body tell me, how can i display recent no of records updated or no of records deleted or no of records are inserted in a form. these records count are display in display items....give me detail explination......
Subbu.....

the easiest way is copy and paste the oracle-forms example from the OU.
You need form-level-trigger ON-ERROR + ON-MESSAGE, POST-INSERT, POST-UPDATE, POST-DELETE, three global variables and a procedure:
ON-ERROR
handle_message( error_code, 'ERROR: ' || ERROR_TYPE || '-' || TO_CHAR(ERROR_CODE) ||': '|| ERROR_TEXT );
ON-MESSAGE
handle_message( message_code, MESSAGE_TYPE || '-' || TO_CHAR(MESSAGE_CODE) || ': ' || MESSAGE_TEXT );
PROCEDURE handle_message( message_number IN NUMBER, message_line IN VARCHAR2 ) IS
BEGIN
    IF message_number IN ( 40400, 40406, 40407 )
    THEN
      DEFAULT_VALUE( '0', 'GLOBAL.insert' );
      DEFAULT_VALUE( '0', 'GLOBAL.update' );
      DEFAULT_VALUE( '0', 'GLOBAL.delete' );
      MESSAGE('Save Ok: ' ||
        :GLOBAL.insert || ' records inserted, ' ||
       :GLOBAL.update || ' records updated, ' ||
       :GLOBAL.delete || ' records deleted !!!' );
      ERASE('GLOBAL.insert');
      ERASE('GLOBAL.update');
      ERASE('GLOBAL.delete');
    ELSE
         MESSAGE(message_line );
          END IF;
END;
POST-INSERT
DEFAULT_VALUE('0', 'GLOBAL.insert');
:GLOBAL.insert := TO_CHAR( TO_NUMBER( :GLOBAL.insert ) + 1 );
POST-UPDATE
DEFAULT_VALUE('0', 'GLOBAL.update');
:GLOBAL.update := TO_CHAR( TO_NUMBER( :GLOBAL.update ) + 1 );
POST-DELETE
DEFAULT_VALUE('0', 'GLOBAL.delete');
:GLOBAL.delete := TO_CHAR( TO_NUMBER( :GLOBAL.delete ) + 1 );try it
Gerd

How can I display the value of the Target Currency variable in my query

We have a query which has a key figure set to prompt for a Target Currency at runtime. Because the user did not want the currency displayed in each cell they used the NODIM function to remove it. They do however want to display the Target Currency in a cell within the report. Using Report Designer, I've tried to set up a Text Box to display this value, however, it is not in the list when looking at Constants, Filters or Variables or trying to display it in a Text box. Has anyone found a way to be able to do this?

Hi and thanks for the reply. I should have stated that because this was a validated query, we'd like to do this without modifying the query and thus having to go through another lengthy validation process. That's why we did not go the route of adding Unit to the query but we may have to. Another thing we can do is use a text variable in the headers that displays the currency. That works but, again, it's a query change whereas finding it in Report Designer will not require a query modification.

How to display the values in JSpinner in format day:HH:mm

Hi All,
I want to know how can I display the values inside a JSpinner in the format day:HH:mm. Here the value of 'day' can be anything say from 0 to 365 and HH stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(new JSpinner.DateEditor(mSpinner, "DD:HH:mm"));
but here the values of day was not proper. Please let me know if there is any standard format or how can I configure my own editor.
Thanks,
Rohit.

Hi,
It worked well for 112 as 112 comes under April month.. i.e. it will work properly for the range 91 to 120 as the current month is April and if we start counting from january 01 then for April month , the number of day will fall under range 91 to 120.
See, it will allow you to change the values beyond the limit (i.e. less than 91 or more than 120) but the real problem is that I used this spinner in the table and when I will try to save the value of spinner , then if the value of day in beyond the limit 91 to 120 then it will automatically changing in the range between 91 to 120.
I tried to use format DD:HH:mm ...... do I need to use any other format..
Hi All,
I want to know how can I display the values inside
de a JSpinner in the format day:HH:mm. Here thevalue
of 'day' can be anything say from 0 to 365 and HH
stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(newJSpinner.DateEditor(mSpinner,
, "DD:HH:mm"));
but here the values of day was not proper. Define "not proper". I just tried it and it displayed
day 112 for today which seems correct.

How to display field value only once in REUSE_ALV_GRID_DISPLAY

hi experts,
               i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve it

Hi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
    carrid   TYPE sflight-carrid,      " Carrier Id
    connid   TYPE sflight-connid,      " Connection No
    fldate   TYPE sflight-fldate,      " Flight date
    seatsmax TYPE sflight-seatsmax,    " Maximum seats
    seatsocc TYPE sflight-seatsocc,    " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
   STANDARD TABLE
         OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
         LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight.            " Getting data for display
PERFORM create_field_cat.            " Create field catalog
PERFORM alv_display.
*&      Form create_field_cat
      Subroutine to create field catalog
      There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING   'Carrier Id'    'CARRID'   '2'.
PERFORM fill_fieldcat USING   'Connection No' 'CONNID'   '1'.
PERFORM fill_fieldcat USING   'Flight Date'   'FLDATE'   '3'.
PERFORM fill_fieldcat USING   'Maxm.Seats'    'SEATSMAX' '4'.
PERFORM fill_fieldcat USING   'Seats Occ'     'SEATSOCC' '5'.
ENDFORM.                                    "create_field_cat
*&      Form fill_fieldcat
      Subroutine to fill data to field column
     -->p_seltext      Column label
     -->p_fieldname    Fieldname of database table
     -->p_col_pos      Column position
FORM fill_fieldcat USING
                    p_seltext    LIKE fs_fieldcat-seltext_m
                    p_fieldname LIKE fs_fieldcat-fieldname
                    p_col_pos    LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos    = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM.                    " fill_fieldcat
*&      Form get_data_sflight
      Subroutine to fetch data from database table
      There is no interface parameter
FORM get_data_sflight .
SELECT carrid
         connid
         fldate
         seatsmax
         seatsocc
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid IN s_carrid.
ENDFORM.                    " get_data_sflight
*&      Form alv_display
      Subroutine for ALV display
      There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      it_fieldcat   = t_fieldcat
    TABLES
      t_outtab      = t_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " alv_display
End of code

How To Display Minus value in SAP SCript

Hello Guys.
I am working on a Script. My Problem is that For a fields BSAD-DMBTR.
I have to show this fields value as minus or plus as per condition with fields
bsad-shkzg. In my Internal table it's update as minus but when I am calling Write form with loop. the value is not display with minus sign.
How can I display value with minus sign in SAP script.
Regards
Swati,,

Hello Guys..
Thanks for Reply. But I am doing that thing already. My Internal table is updated with minus value. My Problem is not That.
let's suppose.
itab-name = 'xyz'.
itab-value = 100.
append itab.
itab-name = 'xyz1'.
itab-value = -1 * 100.
append itab.
loop at itab.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'LINE'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
 EXCEPTIONS
 element = 1
 function = 2
 type = 3
 unopened = 4
 unstarted = 5
 window = 6
 bad_pageformat_for_print = 7
 spool_error = 8
 codepage = 9
 OTHERS = 10.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
endloop.
Now when value is printed in SAP Script both value is display as plus .I want to display secound value as minus.
Please reply it's urgent.
Thanks
Swati....

Clicking add button to display the values

requrement is like this
Could anyone give suggestions with some code .
we have lovs using this one we are searching for the value(ex emloyee name) that value is returned to the base page filed like message text input . we have add button, when ever we click that button to display the value(ex employee name ,desigantion this is from another table )on that same page.

I could not understand your requirement. Post more details of the requirement with specific details.
Message was edited by:
Srini

How to write a formula for display the value by group

Post Author: abadugu
CA Forum: Formula
Hi
Could any one please help me on writing the formula for the below senario.
I'm creating Crystal report Via using ClearQuest (IBM tool) since this tool is not supporting subreport function. I'm planning to write a formula.
I have grouped report by request_type field (request_type field contains Validation Defect, Production Defect, Known Defect etc..)
right now my report output is grouped by request_type
ex:
Validation Defect
                     SUMMARY                                                          COMMENTS
Production Defect
                   SUMMARY                                                          COMMENTS
my question was
If request_type = Production Defect display pm_number value field otherwise display null
ex
Production Defect
PM#          SUMMARY                                                       COMMENTS
Validation Defect
                 SUMMARY                                                       COMMENTS
could you please help me writing a formula.
Thanks
Anand

Post Author: abadugu
CA Forum: Formula
It worked Thank you and I appreciated your help
Thanks

Display Currency Value of User POV for Entity & Value in Text Box (Header)

I am looking for a function in Financial Reporting Studio that operates the same as the HsCurrency function in Smart View. This would allow batch reports displaying the currency value of the User POV for Entity based on the User POV for Value. Right now I have to have Member Lists for separate reports and different currencies as I am only able to display the Value dimension in the heading of a given report. Users will not be certain of the currency if the Value dimension is <Entity Curr Total>.
I tried the HFMCurrency text function, however the entity is not defined in a Row / Column / Page reference as the entity is determined by the User's Point of View.
Is there a way to display the currency value of a User's Point of View for Entity based on the User's Point of View for Value?
Reference from Oracle Hyperion Smart View for Office, Fusion Edition, User's Guide:
HsCurrency
Data sources: Financial Management, Hyperion Enterprise
HsCurrency retrieves the currency value of the specified dimension member. Entity and Value are the only valid members for the HsCurrency function.
Syntax
HsCurrency (“Connection,Entity;Value”)
Example
In this example, HsCurrency retrieves the entity currency where the currency for the East Sales entity is USD, and the currency for the UKSales entity is GBR. The EastSales entity displays USD, and UKSales displays GBR.
HsCurrency(“Comma”,”Entity#EastRegion.EastSales;Value#<Entity Currency>.”)
HsCurrency(“Comma”,”Entity#EastRegion.UKSales;Value#<Entity Currency>.”)

Question answered in My Oracle Support Community - Hyperion Reporting Products:
communities.oracle.com

Display recent value on operand

Similar Messages

Maybe you are looking for