Display region after one process has run

I am using htmldb2.0 and I want to display regions after one process in another region of the same page has run. There is type named as "when process in comma delimited list of Process IDs has run" in condition type of region edit. I tried it with putting my process name(also followed with comma) in expression 1 text area but it doesn't work. I am wondering if this doesn't work, how can I implement it in my application.
Thanks in advance,
Ke Lin

I do not get but....
If one process on page start...then page is not rerenderd until it is finished. If process if finished page is submited and then on refresh page process is not running.
So I do not understand how can two process be started on the same process together?
If this si so maye this could be the solution....
could you create autonomous transaction (it commits their data regarding transaction that it participate in!) to make some parameter in table to 1.
When other process starts it checks this value and if this param is 1 then it should not continue.
P.S.
Do not forget to put another autonomous transaction procedure which will set param to "0" after process finish.
Do this main proc with strong exception handling to ensure that param is allways set to 0.

Similar Messages

  • How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

    how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

    You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
    A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
    The meta refresh is added to the head section of the html file...
    <meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
    The delay time in seconds is marked in blue and the URL to the redirect page is in red.

  • How to display region from one page on the other page?

    Hi,
    I'd like to ask if someone know how to display region created on page X on page Y.
    I've tried to create a "URL" region on Y but this doesn't work and I generally think this is blind way.
    Next I've found an internal function "flows_020100.wwv_flow_disp_page_plugs()" that works pretty well (PL/SQL type region with calling the function) except that is displaying only regions on the same page. I know it's dirty hack but ...
    Any ideas or hints how to solve this? Thanks ...

    have a look here ...
    http://www.oracle.com/technology/products/database/application_express/pdf/apex_best_practices.pdf

  • Display sleeps after 1-2 minutes running Windows 8.1

    Both my MacBook Pro Retina 15-inch (Early 2013) and my wife/son's MacBook Pro 13-inch (Late 2011) are dual booted with Windows 8.1. Both have the same display issue; the display goes to sleep after approximately 1 to 2 minutes (1:20 to be precise). The issue didn't appear until the 2nd day after the install on my MacBook Pro Retina and it has been an ongoing issue for my wife on her 13-inch. Is it related to the 5.1.5621 or 5.1.5640 Boot Camp drivers? Can I remove those drivers and try to go back to the previously released set of drivers? That is when I notice the issue show on my MacBook but honestly there were so many updates through the process that this is just a guess. It's more of a nuisance than anything. After finding and installing Lubbos for the heating issue and TrackPad++ for the trackpad options I was hoping I could solve this as well. Has anyone heard of a fix for this? The only display/sleep issues I've been able to find are not similar to my issue, from what I've read anyways. Any assistance would be greatly appreciated.

    I'm having the same problem and have been working with my company for a week trying to resolve this. We've tried the following:
    - Altering MTU settings (700 - 1400)
    - Turning on/off wireless and connecting via Ethernet
    - Turning on/off encryption
    - Tried DigiTunnel VPN client
    None of this seems to work.
    I am able to connect fine via Windows installed on the same MacBook. It's just the MacOS side that disconnects.

  • Can I submit one process to run many Financial Reports at once?

    I've been asked by one of our HFM customers, about ways to submit 50 FR reports by one command. Best of the process can also be schedulled.
    There is a function called “Batch Reports for Scheduling”. This function can run and refresh a report (built with Financial Reporting) and create a pdf file into a specified target folder.
    The problem with it, is that each report is schedule by a seperate “Batch Reports for Scheduling” function. Since the customer has lots of reports (more than 50), they need to submit them one by one, specify for each one it's parameters values (Year and Period) so it's a time consuming process.
    The customer would like to find an option that will simplify the process by doing all refresh at the same time.
    We are looking for a command line that we could use by a batch (by using .bat for example). We need those commands:
    1. Connect to HFM
    2. Launch “Batched Reports for Scheduling” with right parameter
    3. Disconnect to HFM
    I'd appreciate any idea that would help.
    Thanks in advance for your help.
    Yoram

    Hi Yoram
    There is a command line utility that you can use to run Financial Reporting batches. It is called ScheduleBatch.cmd and can be found in the 'bin' directory under BIPlus (I can't be more specific as it depends which version of FR you are running).
    Take a look at the help attached in the section Scheduler Command Line Interface under the Administrative Tasks for Financial Reporting
    [http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/frameset.htm?launch.html]
    These notes are labelled as v11 but this section equally applies to v9.3.1
    I have not used this with HFM but I have uses a windows .bat file to launch multiple FR batches using this feature (against Essbase) and deliver reports to users out of working hours so that they are in their email inbox when they arrive at work.
    Hope this helps
    Stuart Game
    www.analitica.co.uk

  • Is it possible to resume migration assistant after the process has been interrupted?

    My son interrupted the migration process between an older and my new MB Pro.  Can't seem to get the process to resume.  Is it possble to resume? or to restart?  Is it OK to use thunderbolt-to-thunderbolt?

    goodprogramming wrote:
    It's not the file that is set to read-only at the OS level.  The signature field has an event for signed.  Once that occurs I have the checkbox selected that says mark all fields as read-only.  I want to be sure it is really read-only and that there is no way to make it non-read-only.
    save as does not change the read onlyness of the pdf.  I have tried this.
    It shouldn't matter.
    Making changes to the file after the signature is added will invalidate the signature. You'll know someone has been messing around if the sig is invalidated.
    Even if you have a reason to do what you want, you can't. At least not without a very expensive Digital Rights Management solution plus a server to run it.

  • ME22N : Change PO Line item to Display Mode, After All quantity has GRN

    Hi Experts,
    In ME22N,  PO change mode if the line item has checked with 'Delivery Completed' Indicator in 'Delivery' tab I want to shows that row always in 'Display' mode. Please help me to modify that table control within the exit. I'm using,
    Enhancement : MM06E005
    Exit Name : EXIT_SAPMM06E_012
    Regards,
    Rajasekaran.S

    Hi Raja,
    Think that this is a late reply but might be helpfull to others.
    To make an item in display only mode you will have to create an enhancement implementation in the below method,
    Class --> CL_TABLE_VIEW_MM
    method -->MODIFY_SCREEN_TC_LINE
    in implicit enhancement at the end of this method i code as below.
    data : lv_ekpo type ekpo.
    if <DYN_DATA> is assigned.
    move-corresponding <DYN_DATA> to lv_ekpo.
    if lv_ekpo-XXX is not initial.
    loop at screen.
      screen-input = 0.
      modify screen.
      endloop.
    endif.
    hope this helps.
    If you have a better solution kindly share the same.
    Regards,
    Taher

  • Score Editor doesn't display region after cut

    Hello, after cutting a small section between locators in the Piano Roll I changed to the Score Editor view.
    It will not show the bars after the cut, although the piece plays merrily on ! I moved the playhead to a part after the cut, but still no luck.
    How can I change this ?
    Kay.

    Maybe.... select the two regions at same time... or... Double click on the score window ... but in any case the score is related to the region size.
    G

  • Mailto in outlook after check name has run the email type is invalid

    Good evening all,
    My customer is using Sage 50 Accounts 2014 they have the option to export to outlook 2010. 
    This then users the mailto protocol to save the email into the outlook clients drafts. 
    When we open up the email from the drafts folder it seems ok it has the customers email address in the to field, we then press check names button which it underlines the email as expected. 
    However, if you now right click on the email address and click on outlook properties you get the "email type" filed set to INVALID if you click on the button next to it Internet Type it changes it to SMTP and will then send the email no problem. 
    The DNR we have been getting is like this:
     [email protected]
    #550 5.4.4 ROUTING.NoConnectorForAddressType; unable to route for address type ##
    I have substituted the email address information with the words Example, Name and Domain.
    Troubleshooting:
    We have cleared all of the contact cards in this outlook profile. 
    We have rebuilt the outlook profile.  We are using online profiles so there is no OST to worry about. 
    The outlook client is able to send and received emails in a normal way no problem. 
    Sage don’t believe this is an issue with their product or the installation. 
    This is happening to all the users that use the Sage software. We have created new customers in Sage in case the database was corrupted but this has not made a difference. 
    When using a website link using mailto the issue does not occur. 
    I really need some help with this my gut feeling is that this is ether an outlook or Sage issue ether way I need a fix. 
    So if anyone can help it would be much appreciated.

    Hi Siva,
    i have been looking online quite a bit in the last few days and i can see there have been many posts about this issue however they are all for outlook 2007 and was caused by a secuirty update that is not applied to our system. 
    we are running outlook 2010 with exchange 2013.
    I have just tired this but have been still unsuccessfull.
    Click Tools > Options
    Click the Mail Format tab
    Click Editor Options
    Click Proofing
    Click AutoCorrect Options
    Click the AutoFormat Tab
    Uncheck "Internet and network paths with hyperlinks"
    Click OK, OK and OK
    Kind regards,
    David.

  • HT204370 After one movie has been bought, if itunes updated with subtitules or something else, the movie I have already bought will be updated too?

    Hi,
    I have been buying some movies at the apple store and I would like to know more about the updates.
    I have several movies in DVD and several in the App Store, the difference is that the ones in DVD have a lot of languages and subtitules what is very nive whenever you are watching it with friends from other countries or whatever... the movies in app store are normally just in english language and without subtitles.
    My question is, I am sure that sooner or later the movies will be updated, mines will be updated too or just for the people who will buy it after the updated point.
    Thanks and I hope is more or less clear the question

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • Startup RPTARQEMAIL after leave request has run for a while

    Hi group,
    We have run the leave request for half a year without the RPTARQEMAIL functionality.
    Now we want to start this to send email to requester.
    I notice that when I run this for the first time, it creates an email for all the requests since startup.
    This of course is not desirable. 
    So I am thinking the following strategy:
    - First run, set "From Doc.Date" = the date we start this functionality
    - Once this is run, schedule it up to run "Since last run".
    This should give a smooth start, shouldn't it?
    Thank you in advance.
    /Kirsten

    Thanks Siddharth,
    Could you please explain what you mean by "unpending leaves"?
    Kirsten

  • After submit process vs. javascript

    I'd appreciate it if you all could help me with this problem. I've searched this forum and google for a resolution but have not found it yet. I'm a newbie with APEX so please bear with me. The issue is that I want a button - could be a delete or submit - to be disabled after it is clicked. Additionally I want a process (on submit after computations and validations) to execute when the button is clicked. The dilemma is that the javascript disable button function is called using a URL button (create a button in a region position). My guess is that the on submit process is not fired because the focus goes to the URL (disable button function). Is there any way to call a javascript from non-URL button (Create a button displayed among this region's items)? Or perhaps get the process to run with a URL button? So my issue is I need both the after submit process to run and the javascript to disable the button to run after the button is clicked. Suggestions appreciated.
    Kirk

    Like I indicated I'm a newbie to this web programming. And at this point I'm just learning APEX for possibilities here and because management wants a presentation on it at one of our upcoming meetings.
    After the branch to the URL - which my understanding would be to the same page - it would come up without a record until the user selects one from some mechanism like an LOV. And with no record displaying I'd want the Delete (and Update) button disabled until a record is selected. And now that I'm writing this it has me thinking I need to approach this from a different angle. I need the page to come up with the Delete and Update button already disabled and when a record is selected then (somehow) the buttons should be enabled. Do you think this a more viable approach?

  • Horizontal Line After One Section Complete

    Hi,
    can we pass an Horizontal Line After TEXT ITEM In New Line.
    I want to display line after one part .i have three part like General Information Section ,Personal Information Section Contact Information section and Experience Section .
    i want to Devided these Region using Horizontal Line.
    How can i do this.
    Thanks

    Hi,
    Thanks to reply me.
    It's Good But Not sufficient for me.
    i am using only one region and i want to devided item using Horizontal Line in Three Section .How can i do this with one region.
    How to divide One region in Multiple Section and how to put item in that section.
    How can i do this.
    Thanks

  • Process is running  in sm50

    Dear All,
    In sm50 i see one process is running from last 2 days.
    running        Yes           SAPLTHFB
    But in sm37  there is no process running.
    Please guide.
    Thanks & Regards
    Kumar

    Hi
    Sm50 is local work process monitor and sm66 is global work process monitor.
    If there is some long running process in sm50 you can actually relate the PID i.e. process id of this running program with the other transaction like ST06 in that detail analysis menu -> Top CPU user where actually you can find the pid of that process and you can check whether the process putting load on the system what kind of process is this system, external or user.
    And the process which you are asking means you are using a workprocess. You are the one using the system.
    If not required you can actually cancel the process.
    Hope it helps.
    Edited by: Esha Rajpal on Sep 4, 2008 7:45 AM

  • Get information for process chain running

    Hello Gurus,
           after a process chain running, how can I know how many records are loaded into the data target ? don't want to get back to DTP monitor to get that information.   prefer to getting that information in the log view.
    Many thank.

    Hi,
    The fastest way possible to get the number of records loaded will be from the DTP monitor only.
    You must be having a step where the DTP is executed, simply double click on it and go to monitor.
    hope this helps.
    thanks,
    rahul

Maybe you are looking for