ME22N : Change PO Line item to Display Mode, After All quantity has GRN
Hi Experts,
In ME22N, PO change mode if the line item has checked with 'Delivery Completed' Indicator in 'Delivery' tab I want to shows that row always in 'Display' mode. Please help me to modify that table control within the exit. I'm using,
Enhancement : MM06E005
Exit Name : EXIT_SAPMM06E_012
Regards,
Rajasekaran.S
Hi Raja,
Think that this is a late reply but might be helpfull to others.
To make an item in display only mode you will have to create an enhancement implementation in the below method,
Class --> CL_TABLE_VIEW_MM
method -->MODIFY_SCREEN_TC_LINE
in implicit enhancement at the end of this method i code as below.
data : lv_ekpo type ekpo.
if <DYN_DATA> is assigned.
move-corresponding <DYN_DATA> to lv_ekpo.
if lv_ekpo-XXX is not initial.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endif.
hope this helps.
If you have a better solution kindly share the same.
Regards,
Taher
Similar Messages
-
Change item category Display mode in sales order (Third Party )
Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
RajeshHi all.
Thanks for response
I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
the Sales Order line item in grad Mode i am unable to change item category as TAS
i mean TAN is on Display Mode
and we are using Varient config for that material
Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
Thanks
Rajesh
Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM -
Hi,
When i simulate in F-28(customer), only one line items is displaying
eg: 40 SBI a/c 1500
but not displaying the remaining items like
eg: 40 discount a/c 500
50 ABC cutomer a/c 2000
what may be reason. where can i change settings
Rgds
sunficoHi
Check the partner function of the customer. Also check whether the customer is linkekd to any vendor accounts and that vendor has a open items.
Thanks
Ashok
Assign points for useful answer -
PO printout is not coming after changing only line item Delivery Address
Hi
Can anybody suggest a solution for the problem?
Using ME22N , if I change the line item delivery address details to the already generated manual address number ( Not generated using Transaction MEAN)
If I save the PO then PO Printout is not coming but output message log showing " No print-relevant changes to document XXXXXXXXX exist"
We can read CDHR and CDPOS table for changes .
Is there a way to pass the parameter to the print program to Print the changes?
Thanks
sanath
Edited by: sanath kumar sarvepalli-venkata on Nov 2, 2010 11:23 PMHi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar -
Tracking of changing document line item
Hi,
I have posted a customer noted item for bank gurantee through F-49. I have entered due date for bank guarantee.
I have changed the due date in the line item. After changing the due date, i want to know the earlier due date. i want to keep the tracking of old due dates which i chaged.
Is it possible in standard SAP which helps in tracking such document line item changeS_ALR_87012293 - Display of Changed Documents
-
Hi friends,
Please provide some valuable inputs for the following scenario:
When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
Thanks,
Sandeep
Message was edited by: sandeepSandeep,
Yes, that was my original interpretation. I was having a hard time believing that someone would ask such a question.
I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
I do not provide advice in these forums about details of enhanced solutions. Perhaps one of the other members will be more willing to do your work for you.
Best Regards,
DB49 -
EXIT to change / add line items during STO PO creation in T.Code ME21N
Hi
Can somebody suggest me a EXIT or a BADI to change / add line items during STO PO creation in T.Code ME21N.
The requirement is as below.
When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
But when the PO is posted internally, the item is not changed/added.
Thanks in advance.
Guna.Hi,
Try BADI "ME_PROCESS_PO_CUST".
cheers, -
Fbl1n and fbl5n line item wise display the cutomer and vendor name
Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PMHi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba -
Change of line item amount in miro
hi,
i have a doubt on the change of line item amount field value at PO reference tab in MIRO.
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice?
2) the difference in point 1 will hit stock account (map) or price difference.
3) when vendor later on give CN, we need to do subsequent credit.
4) in subsequent credit, need to create with reference to PO.
5) we need to change the amount at PO reference item line according to CN?
thanksHi,
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice? --- Yes you have to change it to Vemdor invoice amount
2) the difference in point 1 will hit stock account (map) or price difference. --- Yes
3) when vendor later on give CN, we need to do subsequent credit. -
Yes with ref to PO
4) in subsequent credit, need to create with reference to PO. -
Yes
5) we need to change the amount at PO reference item line according to CN? -- yes.
Other Option
You can use invoice reduction - System will create Inoice and credit memo in the same document.
SPRO Steeting require :
1. G/L account should be assigned to RKA trnsaction ket in OBYC.
2. Document type KG should be defined in Transaction code MIRO in customizing for doucment type invoice verification / Valuation in SPRO.
3. Number range should be defined for Doc type KG.
Regards,
Shailesh Mackwan -
How to change the line item storage location during the sales order creatio
How to change the line item storage location during the sales order creatio
Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel -
VAT line item wise display in MIRO screen
Hi Team,
When I am taking MIRO, I am getting the base value of the stock purchased at line item level.
When I put tick mark in calculate tax, tax getting calculate. But this is not appearing in the line item level display.
I am working in retail. Each document contains at least 20 line items. But the vat for this is appearing in gross level. this creates the problem in verification.
How can I get the VAT column also beside the amount column at the line item level.
Please suggest.
MalleshHi Malleswara Rao,
The VAT gets calculated in MIRO at gross level only. If clubs the multiple line items having same Tax Code to calculate the tax at gross level.
This is a standard design. You can also refer OSS note 1175418 which indicate the same kind of limitation in VAT processing.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1175418
Hope this will clarify.
Regards,
Gaurav -
How can create and change PCA line items.
How can create and change PCA line items.
Please tell me the process and t.codes.If you are in version < 4.7 ee then use 9KE0 tcode for passing profict center entries or trasnafer of balances from one profit center to another.
If you are in new GL regular FI entry like FB50 will hold good for account types "S" -
Exchange 2010 OWA [Change Number of items to display per page]
Hi Sir,
I have some problem and question ?
I has migrate from exchange 2007 to exchange 2010.
Exchange 2010 OWA cannot Change Number of items to display per page
Exchange 2007 can change number of items to display per page
Exchange 2010 OWA cannot Change Number of items to display per page
You can help me to solved problem and customization?
Thank you.
BoongerdHi,
This feature has been moved in Exchange 2010 OWA. However this feature is available in OWA light version. Here are steps to change the settings in OWA light version.
Log in to OWA, click the Use the light version of Outlook Web App
check box on the login page.
Select Options in the upper right hand corner of the screen.
Select Messaging from the left navigation panel.
In the section for "Message Options", change the "Number of items to display per page", select the desired number of messages.
Exchange 2010: OWA versus OWA light.
http://blogs.technet.com/b/ilvancri/archive/2010/04/07/exchange-2010-owa-versus-owa-light.aspx
New Features in Exchange 2010 OWA.
http://technet.microsoft.com/en-us/library/aa998629(v=exchg.141).aspx
Best Regards. -
Want to copy Delivery address of one line item in shopping cart to all item
Hi Experts,
We are upgrading from SRM 5.0 to SRM 7.0,In SC Creation We want to copy Delivery address of one line item in shopping cart to all line items in Shopping cart by clicking Change All Items button.This is custom button we added this button and we had written code to achieve the functionality but it is not working.This is same like Change All Items button in Account Assigment for copy accont details of one line item to all other line items in SC.
Web Dynpro Component:/SAPSRM/WDC_UI_DO_SHIPTO
Web Dynpro View:V_DODC_SHIPTO
Thanks,
Aarthi.Hi Prasad,
Our customer needs that button,they want whenever they are clicking the button delivery address should copy to all line items.
In my action ONCHANGE_ALL_ITEMS i called this method
wd_this->mo_dodm_shipto->zchange_all_items( ).
zchange_all_items( ) is implemented in class /SAPSRM/CL_CH_WD_DODM_SHIPTO.
the code i wrote inside zchange_all_items( )
*Error
DATA: LX_PDO_ABORT TYPE REF TO /SAPSRM/CX_PDO_ABORT, " Class for Fatal error caught by PDO Layer
LX_PDO_ERROR TYPE REF TO /SAPSRM/CX_PDO_ERROR. " Class for PDO General Exception
Object Instances
DATA: LO_MSG_CONSUMER TYPE REF TO /SAPSRM/IF_PDO_MSG_CONSUMER,
LO_PDO_SHIPTO TYPE REF TO /SAPSRM/IF_PDO_DO_PARTNER.
Context-Data
DATA: lte_cll_shipto TYPE /sapsrm/if_ch_wd_set_facade=>gt_guid_element,
loe_cll_shipto TYPE REF TO /sapsrm/if_ch_wd_set_element.
Field Symbols
FIELD-SYMBOLS <lse_cll_shipto> LIKE LINE OF lte_cll_shipto.
DATA : lo_pdo_acc TYPE REF TO /sapsrm/if_pdo_do_acct_assgmnt.
DATA : ls_shipto_cll type /SAPSRM/S_CLL_SHIPTO,
lt_pdo_partnerdetails TYPE bbp_pdt_partner,
ls_pdo_partnerdetails TYPE bbp_pds_partner,
LV_GUID TYPE BBP_GUID,
lv_item_guid type bbp_guid,
lv_filled TYPE wdy_boolean.
*exceptions
DATA : LX_ABORT TYPE REF TO /SAPSRM/CX_PDO_ABORT.
*Constants
CONSTANTS : LC_OBJECT_ID TYPE CRMT_SUBOBJECT_CATEGORY_DB VALUE 'BUS2121001',
LC_ADDR_ORIGIN TYPE /SAPSRM/S_CLL_SHIPTO-ADDR_ORIGIN VALUE 'B'.
IF LV_FILLED = ABAP_TRUE.
Downcasting to shipto
LO_PDO_SHIPTO ?= MO_PDO.
insert the clipboard into facade and update and submit update
me->/sapsrm/if_cll_do_mapper~insert_from_clipboard( io_set_facade = mon_cll_set_facade ).
Add new Accounting entries.
lte_cll_shipto = mon_cll_set_facade->get_data_elements( ). "get all elements from the context
LOOP AT lte_cll_shipto ASSIGNING <lse_cll_shipto>.
loe_cll_shipto = <lse_cll_shipto>-set_element.
loe_cll_shipto->get_static_attributes( IMPORTING rv_attributes = ls_shipto_cll ).
Map ui-structure to pdo-structure
MOVE-CORRESPONDING ls_shipto_cll TO ls_pdo_partnerdetails.
IF LS_SHIPTO_CLL-PARTNER_FCT = mv_part_func.
LS_PDO_PARTNERDETAILS-PARTNER_FCT = ''.
ELSE.
LS_PDO_PARTNERDETAILS-PARTNER_FCT = LS_SHIPTO_CLL-PARTNER_FCT.
ENDIF.
IF ls_pdo_partnerdetails-del_ind NE 'X'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = ls_pdo_partnerdetails-p_guid.
mv_acc_guid_split = ls_pdo_shipto-guid .
IF mo_scope = 1.
ls_pdo_partnerdetails-p_guid = mon_cll_set_facade->get_bo_guid( ).
ELSE.
ls_pdo_partnerdetails-p_guid = mo_parent_bo_mapper->items_get_lead_selection( ).
ENDIF.
APPEND ls_pdo_partnerdetails TO lt_pdo_partnerdetails.
ENDIF.
CLEAR : ls_pdo_partnerdetails, ls_shipto_cll.
ENDLOOP.
Add New items to PDO
IF NOT lt_pdo_partnerdetails[] IS INITIAL.
TRY.
LO_PDO_SHIPTO->update_item_partners( EXPORTING it_partner = lt_pdo_partnerdetails
iv_item_guid = lv_item_guid
CHANGING co_message_handler = mo_pdo_message_consumer ).
CATCH /sapsrm/cx_pdo_abort INTO lx_pdo_abort.
mo_cll_message_handler->set_abort( io_pdo_abort_exception = lx_pdo_abort ).
CATCH /sapsrm/cx_pdo_error INTO lx_pdo_error.
mo_cll_message_handler->add_exception( io_pdo_error_exception = lx_pdo_error ).
ENDTRY.
Update PDO with the changed data.
TRY.
mo_pdo->submit_update( ).
CATCH /sapsrm/cx_pdo_abort INTO lx_pdo_abort.
mo_cll_message_handler->set_abort( io_pdo_abort_exception = lx_pdo_abort ).
CATCH /sapsrm/cx_pdo_error INTO lx_pdo_error.
mo_cll_message_handler->add_exception( io_pdo_error_exception = lx_pdo_error ).
ENDTRY.
Fire refresh of DO Mappers registered for refresh since the item table has acc related data.
mo_parent_bo_mapper->fire_event_refresh( iv_perform_updates = abap_false ).
ENDIF.
ENDIF.
Thanks,
Aarthi. -
Price changes in Purchase order Line Items its displaying as"WF-BATCH"
Hi Experts,
I need some Information about Price changes in Purchase order Line Items,In PO Documents Price changes through this wf-batch has changed the value of this row to xxx.xx USD, which does not correspond the invoice.
If i selected the Item changes in the Purchase Order its displaying as"WF-BATCH".
So please try to clarify where this batch originates from.
Brgds,
RKHi Jurgen,
Thanks for your reply.
But how i can check this in Purchase orders,on what basis this price changes information is recorded in PO Line Item level.
can you pls guide me some steps to check the price changes through WF-BATCH.
Brgds,
RK
Maybe you are looking for
-
this is a brand new system from zt systems. it came with almost no software installed. no toolbars or anything, only trial of microsoft office. I don't think that it even generates a crash report.
-
Performance optimization in Select query
Hi All, Please suggest good performance practice for the below code. SELECT * FROM BKPF WHERE BUKRS IN SO_BUKRS AND BELNR IN SO_BELNR AND GJAHR IN SO_GJAHR AND BLART IN SO_BLART
-
Message no M7146 while doing PGI
our process is Export sales and is as given below Create Sales Order u2013 ZCIF VA01 Release of Purchase Requition-ME54N, Create Factory stock Transport Order(P.O.)ME21N & Release-ME29N Tranfer Posting the Goods-MIGO against the sale order MVT type-4
-
Acrobat Pro App: how to delete documents in DC
I can't find where to delete documents in the Acrobat Por DC iphone App. Is there someone who find out?
-
Facetime has developed some background noise or interference after the latest update of iOs. Does anybody else have that problem - and how to solve it. The sound quality was much higher before.