Display system error through a mail

We have a BPM scenario in which XI sends a msg to Backend system.If the
message couldnot reach ,that displays system error at the call adapter level in SXMB_MONI.If we want this error message to be displayed in the failure mail
to the concerned person,it has to be pushed into a message type or datatype.how
to do that?Is there any other way... through alerts?

Hi;
You can use alerts to send out error mails to the recepients.
Refer these weblogs for more details
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
Mudit
Award points if it helps

Similar Messages

Display hard error through a feature

Hi All
I need to insert a hard error on failure of a condition in feature ABKRS.
For example:
If Personnel area = x
Then Payroll area = y
Else display error message "PA and PY Area do not match"
Thanks

Hi Shyam,
Please refer to pg 23 in this pdf.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PAXX/PYINT_MERKMAL.pdf
Regards,
Brinda L

SRM 4.0-- Blank Page displayed without Errors through Web Browser

Hi All,
Can any one help me in the following ....
We are trying to give access through the Web Browser instead of Sap GUI.
we have started all the services through SICF.
when we tried test service through WEB GUI it is showing a blank page.
It is not giving any errors on the page.
there is no problem in the URL..
Can any one help me by giving option of errors and where to check.....
Bye
Suresh

Hi
Read this ->
The entries in table TWPURLSVR should be as follows:
e.g.
LOGSYS : MRDCLNT100
WEB SERVER : SAPDEV14.XEROX.COM:8001
WEB PROTCL:HTTP
WIN SERVER:SAPDEV14.XEROX.COM:8001
WIN PROTCL:HTTP
BSP SERVER:SAPDEV14.XEROX.COM:8001
BSP PROTCL:HTTP
Also, refer to OSS Note 790727 describes the details for publishing all the services
Refer
why can I not find Service BBPGLOBAL in TA SICF?
for details.
Regards
- Atul

E65: System Error

I am using PC Suite v6.84, installed on a Windows XP Professional.
I have no issue sync-ing my office's Microsoft Outlook 2003 calendar items for the past 3 months until recently. Half-way through the sync-ing, my phone will display "System Error". I had rebooted both the phone and laptop but it still doesn't work.
Can anyone advise please? Thanks.

Why is resetting necessary? U mean we need to reset everytime it happens (cos quite often)? Why is Nokia not doing something about it? E series is for enterprise users, but the software is having problem syncing calender, the most basic. This is disappointing.

Error message in PO : System error (error in method PO_POST)

Hi all,
I'm working on BAdI ME_PURCHDOC_POSTED
for Requisition qty checking with PO qty with some tolerance(+/-).
For some conditions I have to terminate the PO posting(ME57).
In the implementation of the method POSTED, afetr some validations, mentioned the statement:
This is my custom message in method >
message e032(/SISLEMCU/MSG01) with wa_ekpo-matnr
When doing this the posting of the document is terminated.
But after it displays the custom message, it followed by the message "System error (error in method PO_POST)" and then terminated.
Here are my questions:
1.I don't want to display "system error (error in method po_post)" message.
2. I want the the screen to hold the data i entered previously after the custom message was prompted and not terminate straight away, as i will need to reenter my data for PO again.
Thanx in Adv.
Regards
Uday

Change for a BADI more suited (not in the update of after-save process) like ME_PROCESS_PO_CUST (Method PROCESS_ITEM, CHECK).
ME_PURCHDOC_POSTED is too late.
Regards

N80 System Error on Sync...but only on one machine...

Hey all,
I just started getting the dreaded "System Error" when syncing my N80 (up-to-date firmware) with PC Suite (up-to-date) on an XP box. I've read all the posts on this topic I could find, and in the past, I've always just shrugged, formatted, and gone on with my life...
But this time is weird - this time, it happens when I cable sync to my work machine, but NOT when I bluetooth sync to my home machine. Wah-huh?
Anyone have any advice on what to look for on the cable-sync (Nokia-approved USB cord) machine? I'd love to avoid formatting once again...
Thanks!
Dave

This is my problem to. I try to syncronize my N80 with Outlook. I have PC Suite 6.84.10.3 on XP SP2.
Syncronizing allways stops after 1369 elements, program displays "Waiting for Nokia N80..." while phone displays "System error".

System Error Messages

Is there a way to disable displaying system error messages that may occur when a BAPI returns no data?

Hi Shawn,
Currently, you cannot do this, since the coding looks for any error that's returned from the backend system. If it finds it, it pops up a window showing the error that was returned. We are currently working on a new feature that will enable the modeler to model errors also, there we are thinking about letting the modeler decide whether to show his/hers own error or show no error at all.
I can't tell you exactly in which SP this feature will be, but it has high priority.
Regards,
Natty

6630 system error message when removie memcard

i have rm-1 6630 6.03.08 when i remove memcard i have 64mb card then few min later a message display system error and no keys work display is on but light is off no call no dial nothing work i remove battery then restart phone again and mobile is working again whats reason?

Then i guess there is nothing much you can do other then resetting or reformatting your phone.
You can do it by following these steps:
- A soft reset by keying in *#7370# when on standby - This will reformat the phone. DO NOT FORGET TO DO A BACK UP AS THIS WILL ERASE YOUR ENTIRE PHONE MEMORY.
The security code by default is 12345
If this fails as well then you may try doing the Hard reset by performing the 3 finger reset. You can do this by switching the phone on with the '3', '*' and green 'call' buttons pressed at the same time.
Mark me a KUDOS if this has helped...

Null Error in Displaying a value through view attribute

I just want to display a value through message styled text bean from view attribute .
For that i use the code in PR:
But it gives null error: Please any one help me.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("StaffInfoVO1");
if(vo!=null)
OARow row = (OARow)vo.getCurrentRow();
System.out.println("vo is not null");
String str1 = row.getAttribute("FullName").toString();
OAMessageStyledTextBean stext1 = (OAMessageStyledTextBean)webBean.findChildRecursive("RFStaffName");
stext1.setText(str1);
While getattribute("FullName") executed it gives null error. Why?
how to rectify?

Hai,
I can execute the query in toad which returns 1 row of data. It is not null rows.
But my vo object, why it is not executed. Returning null. I dont know.. Too many hours i spent.
VO query:
select distinct papf.person_id,papf.FULL_NAME,
papf.EMPLOYEE_NUMBER,
papf.EMAIL_ADDRESS,
papf.WORK_TELEPHONE,
hla.COUNTRY,
sysdate,
pap.NAME,
haou.NAMe department,
ood.ORGANIZATION_NAME
from
per_all_people_f papf,
per_all_assignments_f paaf,
per_all_positions pap,
per_jobs pj,
per_grades pg,
per_person_types ppt,
hr_all_organization_units haou,
hr_locations_all hla,
org_organization_definitions ood
where
papf.PERSON_TYPE_ID=ppt.PERSON_TYPE_ID and
papf.PERSON_ID=paaf.PERSON_ID and
paaf.POSITION_ID=pap.POSITION_ID and
paaf.JOB_ID=pj.JOB_ID and
paaf.BUSINESS_GROUP_ID=haou.BUSINESS_GROUP_ID and
papf.person_type_id=13 and
haou.business_group_id=202 and
haou.NAME like '%Global%Sales%' and
papf.FULL_NAME like '%Stand%' and
paaf.LOCATION_ID=hla.LOCATION_ID and
paaf.ORGANIZATION_ID=ood.ORGANIZATION_ID and
sysdate between papf.EFFECTIVE_START_DATE and papf.EFFECTIVE_END_DATE and
sysdate between paaf.EFFECTIVE_START_DATE and paaf.EFFECTIVE_END_DATE
Help Me.
Thanks & Regards

Mail for exchange E63- "system error-try again lat...

Hi,
Recently the mail for exchange email on my E63 has stopped working. It used to work, but then suddenly stopped and now says system error-try again later. I've tried all sorts of different connection settings and changing my credentials. I used the settings given from the setting up an iphone from the university.
I dont know why it suddently wont work. The link to the info i used is below. Thanks for any help anyone can give as this is really bugging me now.
Sam
http://workspace.nottingham.ac.uk/display/~cczdas/How+to+setup+University+email+on+an+iPhone

More info on this - the problem appears to relate to only Outlook 2007 and not XP.

E71 Mail for Exchange System Error, try again late...

Hi,
Please Help!
I installed MfE 2.7 on my E71, but whenever I try to sync my email and calender, I get a system error.
It begins to sync the email but after that it doesn't sync the calender and I get the system error. Also each time it tries to sync emails, it retrieves all the mail each time.
If I sync only the calender, it retrieves all the items and I get a system error. I've pasted the admin log below.
27/10/2008 10:17:42 start Email sync
27/10/2008 10:17:53 sync died (11), collection=Email activity=handling commands from server
27/10/2008 10:22:36 PING Command Requested
27/10/2008 10:22:42 start Email sync
27/10/2008 10:23:01 sync died (47), collection=Email activity=handling commands from server
Does anyone know how to solve this?

OK - like many on the copius web discussions on this Nokia E71 model/MfE topic I have been getting terminally frustrated with an otherwise great phone.
A trawl through the websites gave me lots of things to try, but most didn't work.
Our large corporate IT dept also were left scratching their heads, and resorted to a full reset, which cured the problem briefly, but as with others' experience it soon returned (also having to fully reconfig is a pain in the proverbial). Things suggested on the discussion sites like disabling Tasks synch, or Secure Connection didn't have any effect.
The fact that most others with the same phone on our system hadn't experienced the problem seemed to hint at it not being a server issue, but something more localised. The apparent fact that 'Emails' did synch OK, but that the process hung on 'Calendar' synch suggested it was a Calendar issue
One post mentioned issues with no-finish-date recurring appointments in Calendar, so I investigated these. I found that one or two had no end date, so I gave these items one.
But interestingly, I also found a high proportion of appointments that had been created last year (09) had end dates like 'Wed 31/03/00' when clearly 'Wed 31/03/10' was intended - was this an odd default in Calendar, or just careless typing? The consequences were that Calendar was possibly wrestling with numerous recurring appts with either 100-year durations, or possibly just hanging on the date confusion - is '00' before or after '10'?.
Therefore, as a precaution, I checked all my recurring appts like this (the procedure may vary according to your browser):-
- In Calendar, open each recurring appt in turn;
- Open the series, not just the individual appointment;
- Check 'Recurrence';
- Check that an 'End By' date is there, and that it is not '00';
- Click OK;
- Click OK again if warned about exceptions;
- Cick 'Save & Close'.
Do this to absolutely all recurring appointments in your Calendar.
Then do a full resynch (Menu/MfE/Synch Mode/Full Resynch etc).
I didn't hold much hope of any effect, but Lo!, it did work, and now Emails, Contacts, Tasks, and Calendar all synch fine so far, using Menu/MfE/Mail for Exchange/Options/Synchronise.
I hope this works for others...let me know if it does.

Mail for Exchange "System error" try it later N82

Hi dudes,
I´ve installed Mail for Exchnage on my N82 and it worked properly, but since some weeks I´ve the following problem:
Synchronising with the server, Mail synch works, but then calendar, contact synch faild with the message "System error, please try again later".
If I´m focring a complte resynch of all items that works, but this is the only chance to get my caldenar and contacts synched. Does anyone has an idea who to fix that, or is it a problem on the excahnge server?
Thanks a lot,
Rs Oliver

Hi, I was experiencing the same issue with MfE on my N96. For info I am using N96 firmware 30.033 (latest) and MfE 2.09.158 (listed on their site as 2.9.158). I have managed to solve it, but in a really clumsy way. I'm hoping someone with more knowledge of these things can provide a more elegant solution. I have tried removing recurring appointments, and doing a full re-sync as suggested in some threads, but that didn't work.
Firslty, I noticed that contacts and email would sync no problem, and it was the calendar sync that was causing the issue. I created another pst data file, and copied all my calendar appointments to it, then erased all of the appointments on the exchange server. I did a sync, and it worked fine.
I then copied just one appointment over to the server. This time the sync failed.
Thinking it might be this appointment, I copied another over and deleted the first. The sync still failed.
I had read that it is sometimes something to do with recurring appointments (I have no recurring appointments on my calendar) so as a long-shot I opened the solitary apointment added a reccurence to it, removed the reccurence again and saved it. What do you know, it synced!
I then copied 10 more appointments across, and the sync failed again. I went through each one, added a recuurence and removed it and the sync worked great. You only have to do this as far back in your calendar as you sync, i.e. if you sync appointments back 1 month just add and remove reccurences for every appointment back 1 month (and every appointment in the future) and the sync should work ok.
I know this isn't a solution if your future calendar is amazingly full (I have around 300 appts in the fututre, and it took me about an hour to do) but at least I can now get it to sync. If anyone has a more sensible way of doing this, or if this post helps you out please leave a comment.
Thanks.
PS. Just to let you know, I also had the same issue with RoadSync, so it isn't a problem with MfE, but it seems to be a very weird thing with Outlook. This 'solution' got the sync working with both RoadSync and MfE.
Message Edited by djbog on 05-Jul-2009 02:16 PM

Mail System Error - Returned Mail

I have set up the Mail with my Pop accounts from the local cable company. I can send and receive all my mail through those email addresses.
THE PROBLEM is that every mail recipient receives the above message when they send an email to me:
Mail System Error - Returned Mail
Reason: 5.1.1 unknown or illegal alias: [email protected]
(xxxxxxxxx = my account)
I receive the email, but the sender is concerned that I don't.
I DO NOT have a mac.com address, nor do I need or want one.
Can I delete the mac.com address somehow? I did delete the mac.com from my email accounts, but it didn't solve the problem and any time I try to add an account the mac.com address is the default.
All the people who send my family emails are beginning to get upset -- Please Help!

Hello au:
Welcome to Apple discussions.
If I were you, I would look at the Mail preferences closely. I suspect (although I do not know, as I have never seen anything like you describe before) that there is a setting that is causing the problem.
Barry
P.S. Not much help, but the problem is new to me.

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

System error while opening the timesheet through Portal

Hi Experts,
I am getting the below error message while opening the timesheet through Web Portal. But I am not getting any error if I book time through back end i.e. CAT2 Transaction.
System error: No receiver could be determined
This error comes in Portal only (not in backend) once I enable "HR Enables CATS" option in Data entry profile through CAC1 transaction. There is no error if the same option is disabled. But we need this option to be enabled.
Can anybody help me ASAP for the same?
Thanks,
Atin

Hi Atin,
Can you please let me know how was that problem with HR Enabled Cats is Solved as w are facing the exact same issue.
thanks
Gaurav

Display system error through a mail

Similar Messages

Maybe you are looking for