Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

Similar Messages

E-mail server could not be reached when system was trying to send message

Hi All,
I have done the settings for mail transport. The same worked fine on development and QA. However, on production, the same settings do not seem to be working I receive message 'The e-mail server could not be reached when the system was trying to send the message', when mail is being sent out.
The settings is as follows:
1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.
2. Create System Alias by going to
System Administration à System Configuration à System Landscape
Go to content area.
Portal Content à Content Provided By SAP à Collaboration and right click.
Select New from PAR à System.
Choose the iview com.sap.netweaver.coll.app.gw and hit next button. Select Java_Mail option and hit next button. Enter appropriate System Name and ID and hit next button. Hit finsh button and open object for editing.
Select System Aliases from display option and add an alias for the system. Save changes.
3. Create Mail Transport by going to
System Administration à System Configuration à Knowledge Management à Collaboration.
   Click Groupware Transports in content area.
   Select Mail Transport on next screen.
   Click New button and create new mail transport definition.
   Give SMTP server being used in organisation, Inbox for Sent messages folder, and give
   system alias created in step 2 as alias.
4. Mail channel server too has been set up.
Thanks and regards,
Arun

Dear All,
I am trying to setup my SMTP mail in WAS7.0 SP4, my motto is to use this setting to send mail out from CAF GP (Approval Form).
I have given SMTP setting at
System Administration à System Configuration à Collaboration à Groupware Transports
System Administration à Universal Worklist & Workflow à workflow à Mail
Please tell me am in the correct part of configuration of mail or is that any other place to set configurations?
As our friend (Arun) mentioned in his first thread to activate Mailing Service, i couldnt see this setting in my WAS7.0.
+1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.+
Is there any other settings i am missing?
The error my CAF GP giving is "The system failed to send an e-mail notification to "
Your help is highly Applauded
Thanks! in advance.
Regards,
Kishore

E-mail server could not be reached Error in Collaboration

Hi All,
I was trying to implement the collaboration feature - Send Email. I have configured email transport and have done the user mapping. When i click send email - it is throwing me the error
"E-mail server could not be reached, when system was trying to send the message"
The email service is active. The email channel is configured and the server is restarted.
Even the firewall is blocked. What could be the reason. I am able to send and receive mails from msoutook. what other configurations are required?
Please do help!
Thanks,
Divya

Hi Yusuf,
I have done that and still the same.
I have done the http proxy settings in visual admin. also tried blocking the firewall.
Am i missing some configurations?
Please do help in this issue.
Thanks,
Divya

Known Issue: "DNS server could not be reached" when creating or updating a RemoteApp collection using template images for some locales

When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable".

Cause: There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
Workaround: Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
Resolution: As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
No valid forwarders to public DNS servers configured on your internal DNS server(s).
A valid internal DNS server is not specified on your Azure RemoteApp VNet.
A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection.

BEA-141151 The admin server could not be reached at ...

I have been at this for 3 days now... I created a new ManagedServer, but I'm not able to make it connect to the Admin server.
The Admin server is running and listening on port 5306. I can connect to the Admin Console (web).
I can also connect to the Admin server via WLST, using this command: connect('operator','operator01','t3://localhost:5306')
However, when I try to run the managed server from a script, it does not see the Admin server. This is the command I run:
java -Dweblogic.Name=ManSer1 -Dweblogic.management.server=t3://localhost:5306 -Dweblogic.RootDirectory=<path to my domain> weblogic.Server
This is the error I get:
<BEA-141151> <The admin server could not be reached at http://localhost:5306.>
I believe it's trying to connect using "http", because I've never actually connected in the past. Here is a website explaining this: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13749/weblogicserver.htm#i1031832
Note: Regardless of which protocol you specify, the initial download of a Managed Server's configuration is over HTTP or HTTPS. After the RMI subsystem initializes, the server instance can use the T3 or T3S protocol.
I'm not sure what else to try... Firewalls are not in play, since this is traffic moving around on the local machine. I'm running on SunOS. Weblogic is version 9.2 MP3.
Appreciate any help.

Is the NodeManager , AdminServer running ?The NodeManager is not running. Is it required?
Also, I haven't closed the command prompt.
I noticed the issue when I tried to deploy my project. Connected to Localhost/7001 but in the deploy project window, I dont see any soa_server instance
running. Also, in the console the soa_server status is shutdown.

The admin server could not be reached

Dear All,
I have oracle weblogic server running on red hat enterprise Linux, with one managed server. I created a self-signed certificate to access the admin server using SSL connection, after creating the certificate and start running the domain, The admin server run fine, but when i start running the managed server using
$ ./startManagedWebLogic.sh osb_server1 https://server_ip:7006 i got that error, " The admin server could not be reached on https://server_ip:7006
and the managed server running independence of admin server, as well as admin server can not establish jmx:t3 connection with the managed server on its SSL port
also in admin server log i got this error
<Sep 30, 2013 6:51:00 PM EET> <Warning> <JMX> <BEA-149504> <The adminstration server was unable to establish JMX Connectivity with the osb_server1 at the JMX Service URL of service:jmx:t3://172.17.11.13:8011/jndi/weblogic.management.mbeanservers.runtime.>
how can i resolve this error?
thanks in advanced

Hi John,
Thanks. Notable errors in this log are:
Failed to connect.[Root Cause: Connection refused ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Attempting to connect to Native Directory: Retry Count: 10 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Failed to connect to native directory. com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Any ideas?
Thanks.
Edited by: 960369 on 21-Sep-2012 02:56
Edited by: 960369 on 21-Sep-2012 03:33

ITunes keeps saying the server could not be contacted when trying to restore my iPhone 5

I'm trying to restore my iPhone 5 using iTunes, because my battery life has greatly decreased, and I believe it to be a software problem. Therefore I'm wanting to wipe the software completely, and update it again, but when I hit restore, it extracts the software, and then tells me the update server could not be reached. I'm not sure what the problem is, I updated my iTunes again and retried but the same thing happened. Please let me know what to do to restore my phone

Try restoring your iPhone from a different computer.
kpower28
Please mark this as "solved my problem" or "helped me"!

So i restarted my iPod and it is telling me that the activation server could not be reached! I don't know how to fix it. please help!

So i restarted my iPod and it is telling me that the activation server could not be reached. And I don't know how to fix it. Please help!!

Maybe this is applicable
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
This says the Activation Servers are on-line
http://www.apple.com/support/systemstatus/

HT1414 i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.

I've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i do not know what this means. I purchased the phone brand new two years ago and have never had any problems with it. The message i am getting reads:
"your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes (which i don't have) to activate it, or try again over cellular connection in a couple minutes. (which i have tried several times with no success) you can also try to activate using wi-fi connection (which i do not have). if this problem persists, contact apple support at apple.com/support."

"Your iPhone could not be activated because the activation server could not be reached"

It won't let me set up my phone due to the wifi- it keeps coming up with "Your iPhone could not be activated because the activation server could not be reached". The wifi is definitely working- I'm using it now! However, after you have entered the password for this wifi you do have to enter details into a portal but this hasn't popped up so I can't do it. This is the wifi I have, any ideas? Thank you in advance

3 possible causes for this message:
1] activation server is actually down. Extremely rare occurrence and of very short duration
if it happens.
2] iPhone is jailbroken or hacked.
3] computer the iPhone is hooked to has been used to jailbreak or hack iOS devices.
For 1], try again. Try different wifi at friend's, school, public place like Starbucks or McDonalds.
For 2] & 3], you are on your own. Google may provide some insight. Terms of Use for this
forum prohibit discussion of hacked and jailbroken devices.

Software updates server could not be reached

Tried to update phone software, but got error:
Nokia Suite - The software updates server could not be reached. Make sure the internet connection is working and try again. If the problem persists, check your firewall settings or contact your network administrator.
Tried various things from related posts, including disabling the firewall, but nothing helped.
Please may I have advice.

mrmothman,
Welcome to Nokia Discussions!
Do you have the latest version of Nokia Suite?
The latest Nokia Suite release can be obtained at the following link http://nds1.nokia.com/files/support/global/phones/software/Nokia_Suite_webinstaller_ALL.exe
Try to update the .NET framework of your Windows by getting the installer here at this link http://www.microsoft.com/en-us/download/details.aspx?id=24872
Enable Windows Update and check for updates. Then restart your computer.
*Avoid connecting the phone through a USB 3.0 (Blue) port, insert it on a USB 2.0 (black) port instead. Always open Nokia Suite by pressing right click at the icon and selecting "Run as Administrator".
Good luck

Administration Server could not be reached

I have installed WebLogic 12c on a WinXP machine and configured a domain in development mode. Apart from the admin server there is only one managed server ms1.
By using the startup scripts I am successfully able to start both AdminServer and ms1 and access the console.
Then I enabled SSL ports on both AdminServer & ms1, enabled the domain Administration port, and overrode Local Administration Port for ms1.
The different port values are:
Administration Port = 9002
AdminServer (Listen Port = 7001, SSL Listen Port = 7002, Local Administration Port Override = 9002)
ms1 (Listen Port = 7011, SSL Listen Port = 7012, Local Administration Port Override = 9012)
Then I am able to start AdminServer from startWebLogic and it duly shows:
<Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 127.0.0.1:9002 for protocols admin, ldaps, https.>
Also able to access the console at this point.
However then when I try to start ms1 using startManagedWebLogic.cmd ms1 https://127.0.0.1:9002 it is not able to connect to the admin server:
<Emergency> <Management> <BEA-141151> <The Administration Server could not be reached at https://127.0.0.1:9002.>
<Info> <Configuration Management> <BEA-150018> <This server is being started in Managed Server independence mode in the absence of the Administration Server.>
As mentioned before I am able to access the console from https://localhost:9002/console and netstat output shows:
TCP 127.0.0.1:9002 0.0.0.0:0 LISTENING
TCP 127.0.0.1:9002 127.0.0.1:3040 ESTABLISHED
TCP 127.0.0.1:9002 127.0.0.1:3042 ESTABLISHED
What could be the reason that while starting up ms1 is not able to connect to AdminServer on 9002? But all is fine when the administration port is not enabled.
Any help on this is much appreciated. Thanks!

Hello,
The problem still persists. I even tried changing a few of the port values and also the administration protocol to https from t3s but they didn't help.
This is how the config.xml looks now:
<server>
<name>AdminServer</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7004</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<listen-port>7003</listen-port>
<listen-address>127.0.0.1</listen-address>
<administration-port>9003</administration-port>
</server>
<server>
<name>ms1</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7012</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<machine xsi:nil="true"></machine>
<listen-port>7011</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address>127.0.0.1</listen-address>
<administration-port>9012</administration-port>
</server>
<administration-port-enabled>true</administration-port-enabled>
<administration-port>9003</administration-port>
<configuration-version>12.1.1.0</configuration-version>
<admin-server-name>AdminServer</admin-server-name>
<administration-protocol>https</administration-protocol>

Have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian

My phone keeps saying Activation server could not be reached or activation request could not be completed. What do i do?

I restored phone, and it still doesnt show any settings,aps etc, and it started like it was going to let me set it up, went thru English, United states, then Wifi, entered wifi info and then it says please wait while we activate and then it goes back to saying can not activate or activation server could not be reached, the diagnostics i run on it while synced with the computer comes back fine that it detects phone,etc. What can i do now?

YOu should ask your family friend. The message you get about activation server being unvailable usually indicates a hacked or jailbroken phone.
only the carrier that the phone is locked to can unlock the phone.

Error: The e-mail server could not be reached when the system was trying to

Similar Messages

Maybe you are looking for