Display the value out of the arraylist

hi all,
I have object arraylist like    while (rs.next()) {
                Map <String, String> al = new HashMap<String, String>();
                 al.put("FeeType",rs.getString("FeeType") );
                 al.put("ProcessStatus", rs.getString("ProcessStatus"));
                 al.put("UpdateId", rs.getString("UpdateId"));
                 al.put("Year", rs.getString("Year"));
                 al.put("Curriculumlist",rs.getString("Curriculumlist"));
                 al.put("subTotal",rs.getString("subTotal"));
                  paymentRecords.add(al);
                }I past the arrarylist paymentRecords out and want to display it
paymentRecords=autoReport();
if(paymentRecords.size()>0) {
for(i=0; i<paymentRecords.size();i++){
FeeType=paymentRecords.get(i).get ??
I just want to know what should I put after my second get ??
Thank you

Ahhh - the old List of Maps instead of objects routine.
Still polluting codebases everywhere.
How about this?
FeeType=paymentRecords.get(i).get("FeeType") Of course your list has to be List<Map> in order for it not to throw a compile error.
If you're going to do somethign like this, why not just create a PaymentRecord java bean with the right properties?

Similar Messages

Is there a way to view video via the display AND TV out at the same time?

Is there a way to display the video output for supported apps on the display as well as through the TV out at the same time? To explain my setup briefly, I'd like to have the front seat passenger in my vehicle be able to hold the iPad and watch video while the A/V cable runs through the car system and displays on the ceiling mounted TV for the back passengers.
As of right now, it seems as though it will only allow for one display at a time, and in this case, only showing video through the TV out. I don't know if the iPad has the processing power to mirror outputs to the display and the TV out at the same time, though I imagine that it should.
So, does anyone have any ideas on how to make this possible, if it's possible at all?
Thanks in advance.

If you'd emailed Steve Jobs with this question, here is what his response would have been had he blessed you with a reply:
No.

Run Variable values out of the "variable values window" in a excel workbook

Dear experts,
I am working on BI 7.10.
Our workbooks are made of several data providers based on the same query and require many different variable values, which give us a long and unconvenient (for the users) "select values for variables" window (ex : we have a Profit and Loss report to run on different consolidation versions, fiscal years etc...)
So I wonder if there is another way to enter these values, out of this window...(macro?)
Many thanks for your help.
Armelle

my variables are global for all data providers since I use the same query for my data providers.
It's just the values (some of them : ex: conso version) that differ from one data provider to another.
ex : here for 2 diff Data providers based on the same query i need to enter the following values for mandatory variables
Different versions / different years but same conso group / data entry year/ posting period.
i would like to have the possibility to enter these values out of the "select values for variable" window (not convenient when we have 7 or 8 DP...), but directly in the workbook.
But maybe this is not possible...
In DP1
conso version = A_PL
conso group = FR01
data entry year = 9999
fiscal year = 2010
Posting period = 12
In DP2
Conso version = P4_MAG
Conso group = FR01
Data entry year = 9999
fiscal year =2011
Posting period = 12

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

I need to add the values stored in the session object into the html textbox

Dear Sir,
i have been trying to create an edit employee details page
What i have done till now is as follow:
1. Got employee id from HTML page.
2. Compared it with the id stored in the database.
3. If the id is correct then pulled the record of the corresponding employee and stored it in the session object.
4. Dispatched the session values to another servlet EditEmpDetails2.java
what i need to do now
5. Now i need to set the session values in the text field of the html form
6. I also need to be able to edit those vales and store the edited values in the database.
Please help me as i have tried doing it for 1 week without any clues
i have tried to create a html page which is something like this:
<html>
<head>
<title>Edit Employee Details Page</title>
<body BGCOLOR="red" text="black">
<h1 ><font color="black">Edit Employee Details Page</font></h1>
<form action = "EditEmpDetails" method="Get">
<table width="50% align="center"
<tr><td>Employee ID: </td>
<td><INPUT TYPE="TEXT" name="employeeid"<br></td></tr>
<tr><td><center><input type="submit" value="submit"></center></td></tr>
<tr><td><center><input type="reset" value="reset" ></center></td></tr>
</table>
</form>
</body>
</html>
design of my servlet EditEmpDetails.java
public void EditEmpDetails1 extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException
PrintWriter out = response.getWriter();
response.setContentType("text/html");
HttpSession session = request.getSession();
String employeeid;
String X = request.getParameter("employeeid");
System.out.println("Employee iD:" + X);
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:murphy");
String query = "Select * from users where employeeid=?";
PreparedStatement stat = con.prepareStatement(query);
System.out.println(stat);
stat.setString(1,X);
ResultSet rs = stat.executeQuery();
while(rs.next())
String Z = rs.getString(password);
if(Z.equals(X))
String A = rs.getString(1);
session.setAttribute("employeeid", A);
String B = rs.getString(2);
session.setAttribute("firstname", B);
String C = rs.getString(3);
session.setAttribute("lastname", C);
String D = rs.getString(4);
session.setAttribute("gender", D);
String E = rs.getString(5);
session.setAttribute("dateofbirth", E);
String F = rs.getString(6);
session.setAttribute("address", F);
String G = rs.getString(7);
session.setAttribute("postalcode", G);
String H = rs.getString(8);
session.setAttribute("phone", H);
String I = rs.getString(9);
session.setAttribute("mobile", I);
String J = rs.getString(10);
String url = "/EditEmpDetao;s.java";
RequestDispatcher dispatcher = getServletContext().getRequestDispatcher(url)
dispatcher.forward(request,response);
catch (Exception e)
system.out.println(e)
I do not know how to put the values stored in the session object into the html text box

3. If the id is correct then pulled the record of the corresponding employee and stored it in the session object.do you really need to store this in session object?
5. Now i need to set the session values in the text field of the html form which form? in a new html/jsp page? i suggest go for a JSP
In your JSP page use JSP expression tags to put the session attributes.
it's something like : <input type='text' name='employeeid' value='<%= session.getAttribute("employeeid") %>' >and you need to generateanother servlet for saving the details/modifications to the database.
I think i m clear enough.
if you need more clarifications. just try it and then post your problem.
Diablo

There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.

I have been looking at my code for hours now and cant figure out what is wrong. The error has kept popping up even when i thought i had fixed everything. maybe a second set of eyes could help me out here. If you could help me out it would be much appreciated.
USE [ConorsSetKits]
GO
CREATE TABLE Customers (
CustomerID Int NOT NULL IDENTITY(1000,1),
LastName NChar(30) NOT NULL,
FirstName NChar(30) NOT NULL,
Address NChar(50) NOT NULL,
City NChar(30) NOT NULL,
State NChar(2) NOT NULL,
Zip Numeric(5) NOT NULL,
Email NVarChar(50) NOT NULL,
DateOfBirth Numeric (4) NOT NULL,
CONSTRAINT CustomersPK PRIMARY KEY(CustomerID),
CONSTRAINT ValidZip
CHECK ( [Zip] LIKE '[0-9][0-9][0-9][0-9][0-9]' ),
CONSTRAINT ValidState
CHECK( LEN([State]) = 2),
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
CREATE TABLE Sets (
SetID Int NOT NULL IDENTITY(1000,1) Primary Key,
SetName NChar(20) NOT NULL,
SetType NChar (20) NOT NULL,
Price Numeric (20) NOT NULL,
Quantity Numeric (50) NOT NULL,
CONSTRAINT SetTypeCheck
CHECK (SetType IN ('Planes','Tanks','Robots','Cars','Helicopters','Boats','Trains','Motorcycles','Jets')),
CONSTRAINT ValidQuantity
CHECK (Quantity >= 0)
CREATE TABLE Orders (
OrderID Int NOT NULL IDENTITY(1000,1),
CustomerID Int NOT NULL,
OrderDate Date NOT NULL,
CONSTRAINT CAIntPK PRIMARY KEY(OrderID, CustomerID),
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders OFF
SET IDENTITY_INSERT dbo.CUSTOMER ON
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1000, 'Janes', 'Jeffrey', '123 W. Elm St', 'Renton', 'WA', '98055',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1001, 'Smith', 'David', '813 Tumbleweed Lane', 'Loveland', 'CO', '81201',
'[email protected]',1992);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1015, 'Twilight', 'Tiffany', '88 1st Avenue', 'Langley', 'WA', '98260',
'[email protected]',1972);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1033, 'Smathers', 'Fred', '10899 88th Ave', 'Bainbridge Island', 'WA', '98110',
'[email protected]',1980);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1034, 'Frederickson', 'Mary Beth', '25 South Lafayette', 'Denver', 'CO', '80201',
'[email protected]',1970);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1036, 'Warning', 'Selma', '205 Burnaby', 'Vancouver', 'BC', '80201',
'[email protected]',1981);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1037, 'Wu', 'Susan', '105 Locust Ave', 'Atlanta', 'GA', '30322',
'404', '653-3465', '[email protected]',1971);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1040, 'Gray', 'Donald','55 Bodega Ave', 'Bodega Bay', 'CA', '94923',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1041, 'Johnson', 'Lynda', '117 C Street', 'Washington', 'DC', '20003',
'[email protected]',1969);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1051, 'Wilkens', 'Chris', '87 Highland Drive', 'Olympia', 'WA', '98508',
'[email protected]',1994);
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets ON
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1000, 'MysterySet1','Planes',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1001, 'MysterySet2','Planes',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1002, 'MysterySet4','Tanks',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1003, 'MysterySet3','Robots',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1004, 'MysterySet5','Cars',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1005, 'MysterySet6','Boats',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1006, 'MysterySet7','Trains',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1007, 'MysterySet8','Motorcycles',$9.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1008, 'MysterySet9','Helicopters',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1009, 'MysterySet10','Jets',$29.99,10);
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders ON
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2012-12-12');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1005, '2013-08-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-08-31');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2014-03-25');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1002, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2013-01-05');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1006, '2012-06-22');
SET IDENTITY_INSERT dbo.Orders OFF

Price Numeric (20) NOT NULL,
I do not think you understand this datatype? Go look at the values you are attempting to insert into this column. For example, "$29.99". After the insert, what value is actually stored in that column?
DateOfBirth Numeric (4) NOT NULL,
No. Just No. Either change the column name to faithfully represent what values you intend to store (and apply the appropriate constraints) or change the datatype and the values that you intend to store to match the column name. And the constraint
that you do have:
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
is both logically suspect and syntactically wrong. First, the upper boundary will be computed as 1999-04-29 15:50:21.670. But, of course, your column is a whole number of no more than 4 digits. The same issue applies to your lower boundary.
A simple select statement will show you those errors
select cast('1920-01-01' as numeric(4)), getdate() - 5844, cast(getdate() - 5844 as numeric(4));
An insert statement fails with the same error. Because, of course, your boundary values must actually be converted to numeric(4) in order to compare them against the value contained in the column. Generally, you can convert from
string to numeric - IF the content of the string actually contains a value that is numeric and can be converted into the specific type needed. Not so in this case. Is this 16 year period (5844 days) significant for some reason? You should
document it here in your DDL with a comment, because it is unlikely to be documented (and kept current) anywhere else.
And lastly, your script has:
SET IDENTITY_INSERT dbo.CUSTOMER OFF
That is not the name of your table, and therefore that statement also fails. The table name you used is plural.

Doubt in the value return by the function based on given condition

Hi,
Below function should return the value based on the value of in_row_number_high variable.
I have used CASE but it does't return proper value.
How could I give that condition?
Please help.
FUNCTION gen_total_lane_count_pct
    in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
    in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
    in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_interval_end_date_time   edr_rpt_by_ranges_output.interval_end_date_time%TYPE,
    in_row_number               edr_rpt_by_ranges_output.range_low%TYPE,
    in_row_number_high          edr_rpt_by_ranges_output.range_high%TYPE,
    in_lane_min                    edr_lane_by_class_report_data.v_lane%TYPE,
    in_lane_max                    edr_lane_by_class_report_data.v_lane%TYPE
RETURN NUMBER
IS
     my_total             NUMBER(18);
     my_count_pct         NUMBER(18);
     my_total_pct         NUMBER(18);
     my_each_count_result NUMBER(18);
     my_count_result            NUMBER(18);
     my_total_count            NUMBER(18);
lane_start           edr_rpt_tmp_report_lanes.site_lane_id%TYPE;
lane_end             edr_rpt_tmp_report_lanes.site_lane_id%TYPE;
row_start            NUMBER(12);
row_end              NUMBER(12);
BEGIN
     my_count_pct       := 0 ;
       SELECT MIN(site_lane_id)
         INTO lane_start
      FROM edr_rpt_tmp_report_lanes
     WHERE edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
       AND edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id;
     SELECT MAX(site_lane_id)
          INTO lane_end
       FROM edr_rpt_tmp_report_lanes
      WHERE edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
        AND edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id;
     SELECT MIN(range_low)
       INTO row_start
       FROM edr_rpt_by_ranges_output;
     SELECT MAX(range_low)
       INTO row_end
       FROM edr_rpt_by_ranges_output;
           my_each_count_result := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    in_row_number,
                                    in_row_number_high,
                                    in_lane_min,
                                    in_lane_max
    my_count_result := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    row_start,
                                    row_end,
                                    in_lane_min,
                                    in_lane_max
     my_total_count := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    in_row_number,
                                    in_row_number_high,
                                    lane_start,
                                    lane_end
         IF (my_each_count_result > 0)   THEN
               my_total := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    row_start,
                                    row_end,
                                    lane_start,
                                    lane_end
            CASE
            WHEN in_row_number_high = row_end THEN
                 my_count_pct := ROUND((my_each_count_result / my_count_result ) * 100 );
            WHEN in_row_number_high < row_end THEN
                    my_count_pct := ROUND((my_each_count_result / my_total ) * 100 ) ;
            ELSE
     RAISE_APPLICATION_ERROR(-20101, 'The row number specified is not recognized.');
            END CASE;
         END IF;
         return my_count_pct;
END gen_total_lane_count_pct;          Edited by: Indhu Ram on Jan 5, 2010 11:43 AM

Hi,
I have to find out the % value for each column value( For rx if there is only 2 columns).To calculate the % , each column value should get divided by the total of that column value.
To calculate the % for the total row , each column total should get divide by the sum of column ( sum of column 1 + sum of column 2)values.
ROUND((my_each_count_result / my_count_result ) * 100 ) ---- This calculaton gives me the % for the total row.
ROUND((my_each_count_result / my_total ) * 100 ) ------- This calculation gives the % for the data row.
The condition that I have tried is, if it reaches end of data row (to achieve that condition I have given this condition in_row_number_high < row_end )
Now my result returns only values based on this condition -- in_row_number_high < row_end .
It does't look for the first condition.
CASE
WHEN in_row_number_high = row_end THEN
my_count_pct := ROUND((my_each_count_result / my_count_result ) * 100 );
WHEN in_row_number_high < row_end THEN
     my_count_pct := ROUND((my_each_count_result / my_total ) * 100 ) ;
ELSE
RAISE_APPLICATION_ERROR(-20101, 'The row number specified is not recognized.');
END CASE;
Hope , you have some good understanding now. Please help me how could I do this?

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.   My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.   We only have one copy of iTunes and we have been sharing t

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.
My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.
We only have one copy of iTunes and we have been sharing the account. (She doesn't really use the computer for anything beyond writing the odd weekend assignment.)
Would I be better off setting her up with her own and making her as a separate user on the computer? Would this require much work?
In recent times with updates, we have a few problems with the duplication of texts and that sort of thing. Both of our texts are stored on the computer and that sort of thing. Also, sometimes texts I send her are sent through to me from her, if that makes any sense.
Anyway, I don't really want to overly complicate matters when it comes to accounts etc, but I wanted to know if a fresh Apple ID would be the best thing or even a new user?
Any tips etc would be greatly appreciated
Thanks in advance
MacBook
I have this question too (0) Reply

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
<input type="file" name="file" accept="image/*" id="file" />
mimeTypes.rdf does not seem to allow this.

''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
<pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
For details, see
* [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

How to capture the value selected in the drop down box

Hi all,
I am populating values in drop down box by using FM vrm_set_values in module pool.
like below
01 ABC
02 ACB
03 BCA
04 CAB
in module pool drop down box element name is RQGM-VALUE.
Problem is what ever the value is select in the drop down box from above element RQGM-VALUE is not filling any value.
i need to capture the value selected in the drop down box and pass it to another variable.

Hi,
Refer this standard code. Your issue will be resolve.
REPORT demo_dynpro_dropdown_listbox.
TYPE-POOLS vrm.
DATA: name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
DATA: wa_spfli TYPE spfli,
      ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
TABLES demof4help.
name = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE init_listbox OUTPUT.
CLEAR demof4help-connid.
SELECT connid cityfrom cityto deptime
    FROM spfli
    INTO CORRESPONDING FIELDS OF wa_spfli
   WHERE carrid = demof4help-carrier2.
    value-key = wa_spfli-connid.
    WRITE wa_spfli-deptime TO value-text USING EDIT MASK '__:__:__'.
    CONCATENATE value-text
                wa_spfli-cityfrom
                wa_spfli-cityto
                INTO value-text SEPARATED BY space.
    APPEND value TO list.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id     = name
            values = list.
ENDMODULE.
MODULE user_command_100.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'CARRIER' AND NOT demof4help-carrier2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE user_command_200.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'SELECTED'.
    MESSAGE i888(sabapdocu) WITH text-001 demof4help-carrier2
                                        demof4help-connid.
ENDIF.
ENDMODULE.

Display the value out of the arraylist

Similar Messages

Maybe you are looking for