Display the webdynpro screen in two languages?

Hi Gurus,
I have requirement to display the webdynpro screen in two language(English & Arabic)
what is the steps involved to achieve this requirement.

Hallo Dharani,
NOTE: you cannot switch the session locale of a running Web Dynpro Java application in the same browser window. The only solution is to start a new Web Dynpro application "from scratch" by executing a new browser instance NOT "browser window" instance. So with Browser -> File menu -> new window you will keep the same session locale even when passing another locale-parameter with the URL-param sap-locale. Sorry, but this is an unsolved restriction in Web Dynpro.
Regards, Bertram

Similar Messages

Howrto display the webdynpro screen in two language?

Hi Gurus,
I have requirement to display the webdynpro screen in two language(English & Arabic).
User can switch the language (between English& Arabic)
Whenevr he chose English all the Text in the webdynpro screen should be in english and if he chose Arabic all the text in the webdynpro screen should be in Arabic.
what is the steps involved to achieve this requirement.
Thanks in Advance,
Dharani

Hallo Dharani,
NOTE: you cannot switch the session locale of a running Web Dynpro Java application in the same browser window. The only solution is to start a new Web Dynpro application "from scratch" by executing a new browser instance NOT "browser window" instance. So with Browser -> File menu -> new window you will keep the same session locale even when passing another locale-parameter with the URL-param sap-locale. Sorry, but this is an unsolved restriction in Web Dynpro.
Regards, Bertram

How to display the entire application in two different languages in apex

Hi,
How to display the entire application in two different languages in apex...
For example i need to display each item in both English and Hindi..
To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
Anyhow how it ll be apex is it possible
Regards,
Pavan

Hi pars,
http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
In this link also i struck in
In page 10 of that document
The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
Thanks alot for ur suggestions.kindly provide more inputs..............

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

How to display the Form output in multiple languages ? ------ Urgent

How to display the Form output in multiple languages ? -
Urgent

Hi,
Do u mean the Form output in 2-3 languages ...like form output will be having english russian etc...
for the above case , what u have to do ...
first have to get the transalations for all the fields
say for example : if the english word is PO Number , then u have to get the transalation text for PO Number :
after this , what u have to is ,,, Log on to SAP with russian language , then in the form o/p u have to paste that russian test ( translation text ) ...
do like this for all the components in the form .
Reward Points if it is Useful.
Thanks,
Manjunath MS

How to display the column header in two rows?

Hi Experts,
I am using ALV_LIST_DISPLAY i neeed to display the column header in two rows.. How can i do that?
Ex: purchase order i need to display "purchase" in one row and "order" in second row.
Thanks in advance,
Sarath.j

REPORT zpwtest .
TYPE-POOLS slis .
DATA : layout TYPE slis_layout_alv .
CONSTANTS : c_len TYPE i VALUE 20 .
TYPES : BEGIN OF ty_t100          ,
          sprsl TYPE t100-sprsl   ,
          arbgb TYPE t100-arbgb   ,
          msgnr TYPE t100-msgnr   ,
          text TYPE t100-text    ,
          fline TYPE t100-text    ,
        END OF ty_t100            .
TYPES : BEGIN OF ty_wrd   ,
         text TYPE char20 ,
        END OF ty_wrd     .
DATA : it_t100     TYPE TABLE OF ty_t100 ,
       it_sentence TYPE TABLE OF ty_wrd ,
       wa_t100     TYPE ty_t100          ,
       wa_word     TYPE ty_wrd           ,
       v_repid     TYPE syst-repid       ,
       v_tabix     TYPE syst-tabix       .
DATA : it_fld TYPE slis_t_fieldcat_alv ,
       it_evt TYPE slis_t_event        ,
       wa_fld TYPE slis_fieldcat_alv   ,
       wa_evt TYPE slis_alv_event      .
INITIALIZATION .
v_repid = sy-repid .
START-OF-SELECTION .
* Get data
SELECT *
    INTO TABLE it_t100
    FROM t100
   WHERE sprsl = 'EN'
     AND arbgb = '00' .
LOOP AT it_t100 INTO wa_t100 .
    v_tabix = sy-tabix .
    CLEAR : it_sentence .
    CALL FUNCTION 'RKD_WORD_WRAP'
         EXPORTING
              textline = wa_t100-text
              outputlen = c_len
         TABLES
              out_lines = it_sentence.
    IF NOT it_sentence IS INITIAL .
      READ TABLE it_sentence INTO wa_word INDEX 1 .
      wa_t100-fline = wa_word-text .
      MODIFY it_t100 FROM wa_t100 INDEX v_tabix .
    ENDIF.
ENDLOOP.
* Prepare fieldcatelog
CLEAR wa_fld .
wa_fld-fieldname = 'SPRSL' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'SPRSL' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'ARBGB' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'ARBGB' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'MSGNR' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'MSGNR' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'FLINE' .
wa_fld-inttype      = 'CHAR' .
wa_fld-outputlen = 20 .
wa_fld-intlen    = 20.
wa_fld-seltext_l = 'Text' .
wa_fld-ddictxt = 'L' .
APPEND wa_fld TO it_fld .
* Get event.. we will handle BOFORE and AFTER line output
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       IMPORTING
            et_events = it_evt.
READ TABLE it_evt INTO wa_evt
WITH KEY name = slis_ev_after_line_output .
wa_evt-form = slis_ev_after_line_output .
MODIFY it_evt FROM wa_evt INDEX sy-tabix .
READ TABLE it_evt INTO wa_evt
WITH KEY name = slis_ev_top_of_page .
wa_evt-form = slis_ev_top_of_page .
MODIFY it_evt FROM wa_evt INDEX sy-tabix .
layout-no_colhead = 'X' .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            i_callback_program = v_repid
            it_fieldcat        = it_fld
            is_layout          = layout
            it_events          = it_evt
       TABLES
            t_outtab           = it_t100.
*       FORM top_of_page                                              *
FORM top_of_page .
    uline .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line1'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line2'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line3'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
ENDFORM.
*       FORM AFTER_LINE_OUTPUT                                        *
FORM after_line_output   USING rs_lineinfo TYPE slis_lineinfo .
CLEAR : it_sentence ,
          wa_t100     .
READ TABLE it_t100 INTO wa_t100 INDEX rs_lineinfo-tabindex .
CHECK sy-subrc = 0 .
CALL FUNCTION 'RKD_WORD_WRAP'
       EXPORTING
            textline = wa_t100-text
            outputlen = c_len
       TABLES
            out_lines = it_sentence.
DESCRIBE TABLE it_sentence LINES v_tabix .
CHECK v_tabix > 1 .
LOOP AT it_sentence INTO wa_word FROM 2 .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           31 sy-vline    ,
           37 sy-vline    ,
           38 wa_word-text ,
           58 sy-vline .
ENDLOOP.
ENDFORM .

Why won't my Apple TV display the setup screen?

Why won't my Apple TV display the setup screen? I have changed hdmi cable, confirmed the correct input, checked connection but nothing. HELP!!! I have a Bose System and use a universal remote, Logitech. Could this be a factor?

Welcome to the Apple Community.
What exactly does your Apple TV display.

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

HTML Client: How to display the edit screen of an item given its ID?

To edit a selected item, I could easily add a new button on the command line and choose the existing method, "editSelected"
But how to edit another item instead of the selected item? Like How to edit an item whose ID # is 10? i.e How to display the edit screen for an item with ID # 10?

The methods such as 'editSelected' apply to screen property collections. Picking these pre-selected options automatically configure the parameter as '<my-collection>.selectedItem'.
If you want an action not directly related to the screen properties then you can choose one of the screen commands under the 'Navigation' list starting with 'show', as in 'show<my-screen-name'. If the screen command accepts parameters then you can
configure the parameter passing manually. In your example, if you added a local 'int' data property to the screen you could assign the ID to that and bind the parameter passed to the screen to that.
In the instances when not even that is sufficient, well then you write your own custom method.
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer.

Display the Welcome screen when Photoshop CC starts up?

I have researched and found lots of incidences where people want to keep the Welcome screen from displaying but I am want it to display and it will not.
The checkbox under Edit>Preferences>General that says "Do Not Show Welcome Screen on Launch" is unchecked. I have tried checking that box saving, then unchecking saving again and restarting Photoshop. I have tried uninstalling Photoshop twice, once saving my preferences, the second time discarding my preferences and re-installing. Still no Welcome screen at launch. I have read that there is an option under Help>Welcome... to reopen the Welcome screen. I do not see that option and believe that is on the Mac only.
By the way the Welcome screen opens/works perfectly in Illustrator CC 2014.
I am running a Windows 7 PC with the latest version of Photoshop CC 2014.
Anyone have any ideas?
Thanks!

I believe you have an installation problem. Others have had problems with the Welcome Screen and I had a problem after the 15.2.2 update. Others were not able to Play the video tutorials from the welcome window. Photoshop seems to use CEPHtmlEngine.exe to display the Welcome screen. The CC 2014.2.2 update installed on my machine without a problem. CC 2014 worked and I had turned off the welcome screen. However I did not have the new Photoshop CC 2014 preference Do not show Welcome Screen on launch and when I tried to use menu Help>Welcome I received a popup error stating Photoshop could not start the plug-in because it was not signed. The way I was able to fix this problem was to download the direct CC 2014 installer and install CC 2014 on top of the CC 2014 currently insall. CC 2014 installed and was installed activated and after I used menu Help>Update to get CC 2014 up to CC 2014.2.2 all worked my Add-ons and preferences were still there. However if I start CC 2014 and immediately try to open the Welcome screen I will get the pop-up your getting Welcome Dialog not installed. But when I click OK and try menu Help>Welcome a second time it works. The new Preference Do not show Welcome Scree on launch is there and I can set it there or from the welcome screen option.

Display the main screen

Hi,
I'm new in ABAP Community. How do you display the main screen after execution without to pass by screen result?
Thanks.

HI
WRITE :
/ 'Welcome to SDN'.
LEAVE PROGRAM.
you execute the above piece of code once with out writing LEAVE PROGRAM. and again execute the program with LEAVE PROGRAM.
you can find the difference.
Regards
Pavan

Can we display the selected fields in two screen?

HI friends i have got a problem where i am have two screen 1000 and 102.
In 1000 screen i have got 2 push buttons display and cancel
if i click display by giving emp_id then module and email has to be display for which i have given code as...
MODULE STATUS_1000 INPUT.
WHEN 'DISPLAY'.
   SELECT SINGLE NAME EMP_MODULE EMAIL
     FROM ZRIF_TABLE
    INTO (ZRIF_TABLE-NAME, ZRIF_TABLE-EMP_MODULE, ZRIF_TABLE-EMAIL)
    WHERE EMP_ID = ZRIF_TABLE-EMP_ID.
this code is working according to the requirement
But the same requirement is there in another screen(102) where if i click emp_id then name emp_module and email has to be displayed but it is not working with the above code.
Caution is i will be having the same emp_id name and module in the same screen before wht it has displayed.
To be clear request sent by details like emp_id name module
request sent to emp_id name and module.
code in 102 screen..
CASE SY-UCOMM.
WHEN 'EXIT'.
CALL SCREEN 100.
WHEN 'DISPLAY'.
   SELECT SINGLE NAME EMP_MODULE EMAIL
     FROM ZRIF_TABLE
    INTO (ZRIF_TABLE-NAME, ZRIF_TABLE-EMP_MODULE, ZRIF_TABLE-EMAIL)
    WHERE EMP_ID = ZRIF_TABLE-EMP_ID.
endcase.
endmodule.

you should store data into a global structure (at program level) and display fields from this unique structure on various dynpros
also this will be better than using the table name as structure name and will avoid to select from a field of the same structure...

SAP Script : to display the material description in two lines

Hi All,
I'm working on scripts.
the material description field is been passed from my driver program ..into the script..
Ex: &gs_final-maktx& ..
There r a number of other fields to be displayed ...after this field ....
Is there any option to split the 'Material description into two lines'?
Ex: at present it is :
This is material description
Requirement is:
This is material
description
I mean that there a number of field berfore and after this field......in the same line
I need to jst split the materia description ...& make it to appear in two lines.....!!
Expecting your suggestions....
Edited by: vidya vidya on Nov 11, 2008 3:17 PM
Edited by: vidya vidya on Nov 11, 2008 3:20 PM

FM TEXT_SPLIT ?
..but i handled this by code.
DATA:      zzboldsx(18) TYPE c,
      zzboldsx2(18) TYPE c,
      zzboldsx3(18) TYPE c,
      zzboldsx4(18) TYPE c.
DATA: i_lines TYPE STANDARD TABLE OF tline WITH HEADER LINE ,
        r_lines TYPE tline,
        v_cnt LIKE sy-tabix.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = stxh-tdid
      language                = stxh-tdspras
      name                    = name
      object                  = stxh-tdobject
    TABLES
      lines                   = i_lines[]
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc = 0.
* Only 4 lines of Header text supported. Can add if needed
    LOOP AT i_lines INTO r_lines.
      CONDENSE r_lines-tdline NO-GAPS.
      v_cnt = v_cnt + 1.
      CASE v_cnt.
        WHEN 1.
          zzboldsx = r_lines-tdline.
        WHEN 2.
          zzboldsx2 = r_lines-tdline.
        WHEN 3.
          zzboldsx3 = r_lines-tdline.
        WHEN 4.
          zzboldsx4 = r_lines-tdline.
        WHEN OTHERS.
          EXIT.
      ENDCASE.
*   zzbolDSX = i_lines-tdline .
    ENDLOOP.

Display the webdynpro screen in two languages?

Similar Messages

Maybe you are looking for