Display wikipage(default.aspx) in mobile view sharepoint 2010 foundation sp2

Recently I deployed a site using sharepoint foundation 2010 sp2.
The site has anonymous access to entire site. I developed some wiki pages using wikipage library. it's looking fine in desktop ,laptop,ipad,tab's.
But coming to mobile view the wikipages are not displaying. But I want to show the wiki page's in mobile view also.
So is there any setting required to set up for that? SP 2010 Foundation SP2

Hi  ,
According to your description, my understanding is that you want to display wikipage in mobile view for SharePoint 2010 foundation sp2.
How about append "?Mobile=1" to the end of the URL of the home page using Internet Explorer? If cannot access, you need to enable the legacy MobileRedirection feature. This feature is enabled with a SharePoint
Management Shell cmdlet:
Enable-SPFeature –identity “MobileRedirection” –URL http://Server/SiteURL
Correspondingly, you can force a mobile device to load a nonmobile page by entering the URL of the nonmobile page and appending "?Mobile=0" to the end of the URL.
Reference:
http://msdn.microsoft.com/en-us/library/office/ms462572(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/ms441925(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/ff407400(v=office.14).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

  • Change display name of workflow email address in sharepoint 2010

    Hi
    How I can change display name of workflow email address in sharepoint 2010. I want to configure display name (from address)of email
     for each site collection separately.for example I want to change "software unit"
     in below pic to another name for my software unit site collection.
    How I can do this?
    Thanx.

    Hi,
    According to your post, my understanding is that you want to change display name of workflow email address in sharepoint 2010.
    In my environment, if I assign a task to a user, the email is as below:
    The “test” is the site name, the [email protected] is the “From” user.
    Do you want to change the “From” field in the workflow?
    If so, you can have a look at the "Send email extended" custom SPD workflow activity (http://www.codeplex.com/SPDActivities
    ) which allow you to specify the sender.
    Here are some similar threads for your reference:
    https://social.technet.microsoft.com/Forums/en-US/22d95510-95b7-4882-b988-4038e59fb031/how-to-change-the-display-name-for-sharepoint-emails-sent-using-workflows?forum=sharepointgeneralprevious
    http://sharepoint.stackexchange.com/questions/19186/changing-from-email-address-in-sharepoint-designer-2010-workflows
    http://sharepoint.stackexchange.com/questions/61964/how-to-change-the-from-address-in-feedback-workflow-email
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Sharepoint 2010 foundation list open(export) to Access button disable?

    1. Why In sharepoint 2010 foundation list "Open with Access" button is disabled?
    2. Some PCs don't even able to see the "Open with Access" button in datasheet view?

    It is a external list
    Please firstly make sure you have installed Assess 2010 properly.
    And please check if the issue occured in all lists or just one list.
    Click File menu after you open the Access, you will see Open. There will open a windows, in the file type dropdownlist(the default value is "All Files(*.*)"), you can select "Microsoft SharePoint Foundation"
    http://community.office365.com/en-us/f/154/t/201186.aspx
    . Check if the add-on has been enabled by clicking
    Internet Options of IE, then selecting Programs > Manage add-ons. Here’s the screenshot for your reference.
    http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010general.aspx?ID=9afe0617-3dc0-49d2-919f-659bf80fde38
    The problem stems from having done a custom installation of Office Professional Plus 2010 and only installing Access.
    If you are doing a custom installation, you must expand Office Tools and Microsoft SharePoint Foundation Support. Under Microsoft SharePoint Foundation Support, there is another Microsoft SharePoint Foundation Support. Set this to Run from My Computer,
    and the Open with Access button will work.
    If this helped you resolve your issue, please mark it Answered

  • Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

    HOw  prepare sharepoint 2010 with sp2 environment how i  install sharepoint 2010 with sp2 in a windows server 2012 
    i mean
    from scratch  i just prepared a windows server 2012 R2 vm
    and i set all required  roels (Appserver,webserver etc) according to this link
    http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
    and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
    from this link
    http://www.microsoft.com/en-us/download/details.aspx?id=39672
    now should i install sp2 and install sharepoint 2010 binaries?
    adil

    SharePoint 2010 has no supportability statement for Server 2012 R2.  I would not use it until Microsoft releases a supportability statement.
    Even it  has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
    adil
    You indicated you were using 2012 R2.  SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • After SharePoint 2010 MOSS SP2 was applied problem with library preview

    Hi,
    I have recently applied SharePoint 2010 MOSS SP2 from here
    http://support.microsoft.com/kb/2687453/en-us
    After I have installed that service pack, one of my custom made library workflow for a department would not work when they Upload a document. It works if they create new documents from library menu, but not if they Upload a new documents.
    ULS Viewer gives following messages
    MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/Upload.aspx?List=%.......Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
    MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/UploadEx.aspx?List=%...... Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
    Some but not all taxonomy values were found, this can lead to the catch all being incorrect. Use TaxonomyField.SetFieldValue to update taxonomy values.
    Also, when I try to use Navigation in Site Settings, and if I want to add new navigation either link or folder, and if I use IE 8 or 9 (32 bit) in the pop up window Navigation Link - web dialog, there is no "OK" button.
    Thank you 

    Hi Eric
    Thank you for helping me.
    I have already came accross this blog and it is now quite the same as my case.
    My navigation works without problem.
    Also, when I open the site in SP Designer, all views of my library show this library in XsltListViewWebPart.
    But this Upload.aspx, is a Form, not a view, and it shows the list in ListFormWebPart.
    Just to remind you, the workflow work fine if the use "New Document" menu from library ribbon. So, I assume something is wrong with Update form.
    This other form UploadEx.aspx, I do not see in SharePoint Designer for this Library.
    I am kind of suspicious that it maybe has something to do with
    http://support.microsoft.com/kb/2872441/en-us
    And am thinking of applying these
    Thank you
    Windows Server 2008 R2 for x64-based Systems Service Pack 1
    Microsoft .NET Framework 4<sup>[1]</sup>
    (2835393)
    Remote Code Execution
    Critical
    2572078 in MS11-078
    Windows Server 2008 R2 for x64-based Systems Service Pack 1
    Microsoft .NET Framework 4<sup>[1]</sup>
    (2840628)
    Elevation of Privilege
    Important
    2656405 in MS12-034

  • Web Analytics doesn't work on one subsite in SharePoint 2010 Foundation

    Hi all,
    I receive message on one subsite's web analytics settings in SharePoint 2010 Foundation environment.
    I've tried to delete web analytics service application and add it again, set parameter value for timer jobs which are perocessing and importing this data - nothing helps.
    I see that .usage files are collecting in 14 hive and I have this information for all other sites and subsites except this one.
    A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed
    yet
    Many thanks in advance.

    Hi Mihail,
    What's the status of “Web Analytics Trigger Workflows Timer Job “ in CA ?
    Try to run it again manually for the affected web app and let us know results.
    Warm Regards, Pratik Vyas | SharePoint Consultant | http://sharepointpratik.blogspot.com/ | Posting is provided "AS IS" with no warranties, and confers no rights Please remember to click "Mark As Answer" if a post solves your problem
    or "Vote As Helpful" if it was useful.

  • Sharepoint 2010 Foundation administrator permission gone

    Hi all experts;
    today, we found that the administrator privilege  on Team Site Owners suddenly gone.  All administrators under this group is no longer to manage the Sharepoint site and the users cannot add and edit any new or existing files.
    It affect the domain adminstrator account too,  any way to fix it?
    Symptoms, under Home page of Sharepoint 2010 foundation, my own user account and the administrator account cannot change the permission on user account.  No Sharepoint Designer feature listed, etc.

    you dont need to rebuild the sharepoint for this, rather the restore the Content database just before when it was working fine.
    I would check at SQL Server, if Content DB is marked as readonly. also check from central admin if site collection is locked as read only or other. could you please confirm it?
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Installed Sharepoint 2010 Server SP2 Update; PSConfig succeeds but CA still shows "Upgrade Available"

    I have installed SharePoint 2010 Server SP2.  Central Administration shows the configuration database is at 14.0.7015.1000.  I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc.  But
    I got those cleaned up and finally got PSConfig to complete.
    However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have. 
    When I run stsadm.exe -o localupgradestatus it shows me the following:
    [2] content database(s) encountered.
    [0] content database(s) still need upgrade or cannot be upgraded.
    [23] site collection(s) are contained in the content databases.
    [0] site collection(s) still need upgrade.
    [53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
    The 12 objects that cannot be upgraded are ancillary databases like:
    StateService_[GUID]
    Secure_Store_Service_DB_[GUID]
    PerformancePoint Service Application_[GUID]
    They all show "Cannot Upgrade" for the status.
    Am I correct in thinking these are what's keeping the status at Upgrade Available?  And if so how can I resolve?
    If not, what else can be done to change that Upgrade Available status?
    My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
    Thank you.

    use psconfig via command line:
    > PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Display latest instance of Crystal Reports in SharePoint 2010

    Dear Sirs,
    I have BO 4.0 and SharePoint 2010 and Integration Option.
    I need to display latest instance of Crystal Reports in SharePoint webpart.
    I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
    But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
    Is it possible to display latest instance of Crystal report in SharePoint Web Part?
    Best regards,
    Emmo

    Dear Sirs,
    I have BO 4.0 and SharePoint 2010 and Integration Option.
    I need to display latest instance of Crystal Reports in SharePoint webpart.
    I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
    But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
    Is it possible to display latest instance of Crystal report in SharePoint Web Part?
    Best regards,
    Emmo

  • Need to Upgrade Sharepoint 2010 to SP2- advise!

    Hello All,
    I do not work on SharePoint services much, basic operations only.  I am entitled to upgrade the SP application and backend SQL in order to make it compatible with our Backup Solution (Symantec Backup Exec 2014).
    We got 2 servers, one is running the SharePoint 2010 application (v 14.0.5136.5002), and another is running the MS SQL Server (SQL V10.0.2531.0) for database.
    We want to upgrade  1) SP from v 14.0.5136.5002 into Service Pack 2 (​14.0.7015.1000)
                                       2) SQL from (SQL V10.0.2531.0) into SP3 (10.0.5500.0).
    I am referring to following threads for version sequence and downloads, apparently correct and helpful-
    SP: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=224
    SQL: http://sqlserverbuilds.blogspot.com/
    My question is,  1) while upgrading which one to go first - Sharepoint App server or SQL server? What's the best  Sequence?
                              2) Can I upgrade SP and SQL from current version to the mentioned version, by directly downloading and
    installing those versions? Or I have to deploy any hotfixes/patches prior to that release from the current one?
    Thanks for any advises.
    Insaf Muhammed

    HI Muhammad,There is no Sequence for SQL,SP.we can do first SQL and next SP.please find the details below for Sp-Sp2 and SQL.You can find all the latest updates and patches in Cumulative update in post categories.
    http://expertsharepoint.blogspot.de/2013/10/detailed-sharepoint-2010-sp2.html
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
    Thank you very much Mr. Anil for the advise and SP link!
    Great article for SP SP2 upgrade with screenshots.  So as I understand I can go ahead and install SQL SP3 and SP SP2 downloads on top of current releases I have and everything should be OK!
    I couldn't see the SQL SP3 deployment part around, could you post if you got one? 
    Thanks a lot :)
    Insaf Muhammed

  • Error while running February 2014 CU for SharePoint 2010 Foundation: The expected version of the product was not found on the system

    I ran SP2 and SP2 for Language Pack successfully before.
    Here is how it looks:
    Product
    Version
    Status
    Language Pack for SharePoint   Foundation 2010 - Portuguese/Português (Brasil)
    Installed
    Microsoft SharePoint Foundation 2010 1046   Lang Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft SharePoint Foundation 2010 1046   Lang Pack Core
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Language Pack for SharePoint,   Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
    Installed
    Microsoft Access Services Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Document Lifecycle Components   Portuguese (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Hotfix for Microsoft Office Server   (KB2512800)
    14.0.5138.5000
    Installed
    Microsoft Excel Services Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Excel Web App Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft InfoPath Form Services   Portuguese (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (Portuguese   (Brazil)) 2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Web Apps Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Web Apps Proof   (Portuguese (Brazil)) 2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Web Apps Shared Coms   Portuguese (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft OMUI Portuguese (Brazil)   Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Project Server Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Search Server 2010 Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Hotfix for Microsoft Office Server   (KB2475878)
    14.0.5135.5000
    Installed
    Microsoft Shared Coms Portuguese (Brazil)   Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft SharePoint Foundation 2010 1046   Lang Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft SharePoint Portal Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Slide Library Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Visio Services Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Web Analytics Portuguese   (Brazil) Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Word Server Portuguese (Brazil)   Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft XMUI Portuguese (Brazil)   Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   2010 Server Language Pack (KB2687462) 64-Bit Edition
    14.0.7015.1000
    Installed
    PerformancePoint Services in SharePoint   1046 Language Pack
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft SharePoint   Foundation 2010
    Installed
    Microsoft SharePoint Foundation 2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft SharePoint Foundation 2010 1033   Lang Pack
    14.0.4763.1000
    Installed
    Hotfix for Microsoft SharePoint   Foundation 2010 (KB2512804)
    14.0.5138.5000
    Installed
    Microsoft SharePoint Foundation 2010 Core
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft® Search Server 2010   Express
    Installed
    Microsoft Office Server Proof (Arabic)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (English)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (French)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (German)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (Russian)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Office Server Proof (Spanish)   2010
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Search Server 2010 Core
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Search Server 2010 English   Language Pack
    14.0.4763.1000
    Installed
    Hotfix for Microsoft Office Server   (KB2475878)
    14.0.5135.5000
    Installed
    Microsoft Search Server 2010 Express
    14.0.4763.1000
    Installed
    Microsoft Shared Components
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Shared Coms English Language   Pack
    14.0.4763.1000
    Installed
    Microsoft SharePoint Foundation 2010 1033   Lang Pack
    14.0.4763.1000
    Installed
    Hotfix for Microsoft SharePoint   Foundation 2010 (KB2512804)
    14.0.5138.5000
    Installed
    Microsoft SharePoint Foundation 2010 Core
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    Microsoft Web Analytics English Language   Pack
    14.0.4763.1000
    Installed
    Microsoft Web Analytics Web Front End   Components
    14.0.7015.1000
    Installed
    Service Pack 2 for Microsoft   SharePoint 2010 (KB2687453) 64-Bit Edition
    14.0.7015.1000
    Installed
    However when I try to run February CU or December CU I get the error:
    The expected version of the product was not found on the system
    it's possible that I messed up because
    I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
    these are the files I ran:
    1 - SP2 pt-br
    oserversp2010-kb2687453-fullfile-x64-pt-br
    2 - SP2 for Language Pack pt-br:
    oslpksp2010-kb2687462-fullfile-x64-pt-br
    3 - ran configuration wizard (had na error message the first time and success in the second try)
    4 - December CU or February CU:
    Download SharePoint Foundation 2010 February 2014 CU
    The expected version of the product was not found on the system
    In the first step I think I should have installed
    wsssp2010-kb2687464-fullfile-x64-pt-br
    Now I try to runthis and I get:
    The update is already installed on the system.
    Hopefully this is a QA Environment but it would be a pain to start over.
    Any suggestion?
    Thanks
    J.Clua

    Hi,
    Here are all errors logged:
    [OWSTIMER]   [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing   feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id   81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database   [WSS_Content_Sites_01], but is not installed
    on the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id =   [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id   4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database   [WSS_Content_Sites_01], but is not installed
    on the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id =   [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id   af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database   [WSS_Content_Sites_01], but is not installed
    on the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id =   [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id   00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database   [WSS_Content_Sites_01], but is not installed
    on the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id =   [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description =   [This feature allows visitors
    to rate blog posts], Install Location = [Blog   Rating]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id   5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database   [WSS_Content_AcademiaTI], but is not installed
    on the current farm. The   missing feature may cause upgrade to fail. Please install any solution which   contains the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id =   [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id   af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database   [WSS_Content_GlobalIT], but is not installed
    on the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language   1046...
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template   75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is   referenced in the database [WSS_Content_EXP], but is not installed on the   current farm. The
    missing site definition may cause upgrade to fail. Please   install any solution which contains the site definition and restart upgrade   if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template   75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is   referenced in the database [WSS_Content_EXP], but is not installed on the   current farm. The
    missing site definition may cause upgrade to fail. Please   install any solution which contains the site definition and restart upgrade   if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id =   [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id   75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id =   [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id   75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id =   [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [75a0fea7-040e-4abb-b94b-32f1e7572840]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database   [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
    [3/11/2014 5:25:54 PM]: Found   a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not   installed on the current farm. The missing feature may cause upgrade to fail.   Please install any solution which contains the feature
    and restart upgrade if   necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [f7b9c169-1418-41f3-888f-8ac436e17a0a]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [75a0fea7-377d-4b4f-b864-984379ed0f42]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [75a0fea7-9d96-4f02-a800-a3512154efcd]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id   75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id =   [90cd055f-f21f-42c5-b3fe-bb67173583d4]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [75a0fea7-0017-4993-85fe-c37971507bbc]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [75a0fea7-fe65-41c3-a965-c5df83fb098b]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [75a0fea7-7c51-4a75-92c1-cbaccb371622]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [75a0fea7-b0ef-434e-90d6-ce997d970564]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [75a0fea7-37d2-484b-b362-dcff1538e2a4]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id   75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id =   [49c44827-4747-4e89-999c-f199ad95cfa8]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id   49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id =   [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id   75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id =   [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
    [OWSTIMER] [SPContentDatabaseSequence]   [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id   75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database   [WSS_Content_EXP], but is not installed on
    the current farm. The missing   feature may cause upgrade to fail. Please install any solution which contains   the feature and restart upgrade if necessary.
    [OWSTIMER] [SPSiteWssSequence] [ERROR]   [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of   Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
    [OWSTIMER] [SPSiteWssSequence] [ERROR]   [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
    O nome especificado para este campo é   igual ao de outro campo da lista. Escolha outro nome e tente   novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
    [OWSTIMER] [SPSiteWssSequence] [ERROR]   [3/11/2014 5:32:40 PM]:   
    at   Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String   bstrUrl, String bstrListName, String bstrXML)
         at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl,   String bstrListName, String bstrXML)
    [OWSTIMER] [SPSiteWssSequence] [ERROR]   [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
    O nome especificado para este campo é   igual ao de outro campo da lista. Escolha outro nome e tente novamente.
    [OWSTIMER] [SPSiteWssSequence] [ERROR]   [3/11/2014 5:32:40 PM]:   
    at   Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed.   Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit   set. Moving
    on to the next object in sequence.
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
    O nome especificado para este campo é   igual ao de outro campo da lista. Escolha outro nome e tente novamente.
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:32:40 PM]:   
    at   Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
         at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl,   String bstrListName, String bstrXML)
         at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
         at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object   field, Boolean bIndexed)
         at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
         at   Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
         at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of   Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:32:40 PM]:   
    at   Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
         at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o,   Boolean bRecurse)
    [OWSTIMER] [SPUpgradeSession] [ERROR]   [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception:   Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with   errors. 
    Review the upgrade log file   located in C:\Program Files\Common Files\Microsoft Shared\Web Server   Extensions\14\LOGS\Upgrade-20140311-164603-307.log. 
    The number of errors and warnings is listed   at the end of the upgrade log file.
         at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
         at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
         at   Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid   targetInstanceId)
    Despite all the erros, can I consider these farm updated in terms of SharePoint build?
    Thanks
    J.Clua

  • Infopath fields binding not visible in datasheet view Sharepoint 2010

    Hello Everyone!!!
    I have created a custom list in sharepoint then customized the infopath form in infopath form designer.  I have created a drop down and bind the dropdown form the soap web service method. It is working fine when I open the form.
    But when i open the DataSheet View of custom list, field is displaying but the drop down list is not getting bind with data. what is issue. Infopath binding and rule don't work with datasheet view?
    Please reply 

    Hi,
    As you mentioned dd data is appearing in form but not in datasheet view...
    maybe there are compatibility issues
    with 32 bit and 64 bit component of office and IE.
    Try reinstalling "2007 Office System Driver: Data Connectivity Components" (link below)it installs a 32-bit version
    of the Datasheet component that will work with the 64-bit version of Office 2010 as long as you are using a 32-bit version of an Internet browser.
    MS Support Article https://support.microsoft.com/kb/2266203/en-us
    Re-install https://www.microsoft.com/en-us/download/details.aspx?id=23734

  • Show all versions of an item in a list view SharePoint 2010

    Hi,
    I created a task list and a view.  The list has a comments field which is set up to append new comments.  In the view, the comments are coming up with a link "View Entries".  How can I get the view to show all of the comments
    for each item in a view.
    For instance, instead of it showing the list item:
    ID  Comments
    1    View Entries...
    it would show:
    ID Comments
    1  Blah
    1  Blah Blah
    1  Blah blah blah
    Thanks,
    Jan

    I handled this a different way, however this will only work for you if you don't have a big list yet.
    1. Create a new field called "Comments Report"
    2. Copy and paste existing comments into that field
    3. Create a workflow in SharePoint Designer on Item Created and Change, under Action "Set Field in Current Item":
    Set [Comments Report] to [%Workflow Context:Current User%] ([%Workflow Context:Date and Time Started%] [%Workflow Context:Date and Time Started%]): [%Current Item:Comments%] </br></br>[Current Item:Comments Report%]
    The first date and time is Short Date, the second is Short Time.  Then hide the Comments Report within the Manage Content Type edit screen by changing it to hidden, and only display the Comments Report field where you want to view it.

  • Dyanmics CRM integrated with sharepoint 2010 foundation - new created account folder can not trigger sharepoint workflow.

    I integrated MS CRM 2013 with SharePoint foundation 2010 for document management. integration works.
    Now I need to create several subfolders and set proper permission on each folder. So, I created a workflow to do it automatically. It works when I manually create a new folder under SharePoint account, or I manually run it for an account folder. Thus, sharepoint
    workflow works as I expected.
    However, when I access Account's document from CRM (first time), sharepoint would create an folder for this account. In this case, the workflow doesn't work. and it show error: "Failed on Start(retrying)".
    Anyone has experience on similar issues or have clue how to trace this error?

    Hi Justin,
    From your description, the issue might be related to the workflow created by visual studio.
    Could you please try to locate error message in workflow report or ULS log:
    https://technet.microsoft.com/en-in/library/cc298927%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    also debug the workflow per:
    http://blogs.msdn.com/b/philloth/archive/2009/01/19/how-to-debug-a-workflow-with-visual-studio.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Shared review using Sharepoint 2010 Foundation

    Brief description *
    Sharepoint for Shared review
    Please describe your issue in as much detail as possible *
    Shared review using server acrobat.com works fine. However, when using Sharepoint as server the testing fails and it is not possible to finnish the set up of the shared review.
    This is pictured in(bild1.jpg.) As the return code is Status: undefined it is not possible to proceed.
    However, when looking into the sharepoint site a file called com.adobe.acrobat.sharepoint has been created as shown in attachment2 (bild2.jpg)
    When this file is opened it contains the following text written by acrobat; Testing Writeablility
    It seems like the test has been done sucessfully but that Acrobat is not able to read/understand that.
    My Acrobat 9 is swedish version but the 'Testing Writeablility' is in english regardless of if I create a Sharepoint site in swedish or english.
    Please help me out.
    regards Anders K
    bild1
    bild2

    The login names of the sharepoint server is not controlled by my organisation. Sharepoint is hosted.
    At the time initiating the review when Sharepoint is presenting possible locations (shared documents libraries) for the review then I need to login
    using credentials very much diffrent from the windows credentials.
    They are of course also diffrent from the identity that Acrobat itself is carrying from the acrobat.com?
    This situation is the same for for the reviewers that has no problem.
    regards
    PS do you have a suspicion that windows credentials or Acrobat credentials are thrown automatically at Sharepoint although I have logged in
    at the time of finding possible review location.

Maybe you are looking for

  • I NEED HELP WITH SYNC PROBLEM!

    I have already posted about this once and got no help! I can not afford Apple's greedy fee for helping us with a product we paid a lot for My iPad will not sync with iTunes anymore! The error I get is: The iPad "Jonnathon's iPad" cannot be synced. An

  • How can I pull a avg for a range in a lookup statement

    I have 2 data sources that I am trying compare  Once has a start date and end date and the other has a constant list of values and dates.  I want to AVG the values for the time between the start and end date in the other table. See example below....

  • Signing JNLP files?

    I just found out that JNLP files can be signed (see JNLP specification section: "5.4.1 Signing of JNLP Files"). What advantage is there to signing the JNLP since the application will run unrestricted even if the JNLP is not signed (but the JAR files

  • Page Break in Adobe Forms

    Dear all In this BC480_TABLE_NESTED  example program, i could see that for every value in Table 1, there is a set of values in Table 2. After printing values in Table 1 and it's corresponding values in Table 2., the second value in Table 1 is printed

  • Aligning webpage to center in Dreamweaver

    Hello. I'm a begginer and I'm trying to align the second page of the whole site. I managed to center align perfectly the first page by clicking the border but when I export the second page from Photoshop to Dreamweaver the code CSS appears and that's