Display workorder   only related to   vendor selected in Vendor  name UDF

Hi ,
I am using SAP 2007 PL 18 ,
In a Goods Issue Form I am  created two UDF 1) Vendor Name 2)  Work Order Nos .  
Here queries related  Workorder No. Display workorder   only related to particular  vendor selected in Vendor name UDF  .
Pl provide me FMS query.
Thanks
nitin

Hi Nitin,
My question is How you can know these Work orders are related to particular Vendor? Any relation is there between the Vendors and work orders?
Also what you calling as Work Orders? I think it is Purchase Order?
If it is PO, then try this
Select T0.DocNum from ORDR T0 where T0.CardCode = $[$OIGE.U_BPCode] and T0.Status = 'O'
The above query will show only the Open PO list. If you want all POs then remove the T0.Status condition.
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 11:13 AM

Similar Messages

  • Display Column only when Current Year Selected

    Hi Gurus,
    1)I have a Req where in I need to Display a Column only when 2012 is selected,It shouldn't appear when i select 2010 & 2011 in the Prompt.
    2)I have to display a column only when the Last month of the Quarter is selected.
    Any help???

    Hi,
    Make it two reports, one with the column and the other report without the column. Place both the reports in two different dashboard sections and use conditional show/hide section as explained here,
    http://total-bi.com/2011/01/obiee-hide-show-sections/
    Regards,
    Dpka

  • SXMB_MONI displays Errors only

    hi all,
    Due to some reason SXMB_MONI is displaying ERRORS only even if I select all the messagse. Is there a config setting that need to be changed ?
    Please advise, Thanks.
    FS

    On SXMB_MONI Screen, Make VIEW Button = Standard
    Make Length of Output List for 2000.
    Status Group & Status, Make these BLANK.
    Date from - give date of 1 year back.
    SENDER & RECEIVER, make it BLANK.
    & RUN.

  • ME49 enhancement (vendor name will always appear)

    Hi gurus,
    In ME49 Price Comparison List, I can get price comparisons by either inputting
    1)Quotation Numbers
    or
    2)Collective RFQ
    Inputting only quotation numbers will display the price comparison output WITH vendor names ONLY.
    Inputting only collective RFQ number will display the comparison output WITH the collective number in the report ONLY and NO VENDOR NAME.
    How do I force the Vendor name to always appear in the output? Or in other words, how do I make the program "think" that Quotation Numbers was the one that was inputted?
    Thank you!
    Sincerely,
    Mozart Pena

    I think you cannot. ME49 does not offer much in the way of user-exits, enhancements, BADI's ... there's one BADI you can try (but I wouldn't get my hopes up): ALV_SWITCH_GRID_LIST ... or otherwise you can do a modification to SAP standard ...

  • Vendor name in Asset Master Table

    Hi all,
    If i open any asset master with Tcode AS02, i am able to see the vendor code and vendor name in the origin  tab in the asset master.
    And the fileds filled in asset master will be stored in table called ANLA, when i open the said table for the respective asset, there i am able to see only the vendor code only not the vendor name field.
    the vendor name field ANLA-LIEFE was showing blank, as it was showing data in the asset master.
    I think there might a technical issue in this regard.
    Please suggest me to fix this bug.
    Thanks,
    Srinu

    Hi
    It is not a bug,
    This field is currently for informational purposes only.
    You can only use this field to define sort versions.
    SAP-Definition of Sort version."A means of defining groups and group totals in asset reports. All fields of the asset master record can be used as group and/or sort criteria for defining a sort version. You enter the sort version key when starting a report."
    regards

  • GR to be done against only Inbound delivery for selected vendors

    GR to be done against only Inbound delivery for selected vendors. If the user putsthe combination " Goods Receipt+ Purchase Order+ Purchase Order Number " in MIGO , the error should be displayed as "Create MIGO with Ref to ASN"
         At the time of MIGO, when user put the combination of Goods Receipt+ Purchase Order and purchase order number, BADI will activate.
         BADI will search the vendor code from the entered purchase order in the Z table in which user maintain the vendor codes.
         If BADI finds the vendor code in the Z table then, will give error as u201CPlease create inbound delivery firstu201D.
         If BADI does not find the vendor code in Z table then it will inactive.
         In short we are restricting the selected vendor for MIGO with reference to PO.

    Hi,
    If u had used confirmation control key (0001) - In Item details of PO, as per standard SAP u cannot proceed for GR without inbound delivery. Otherwise use MB_MIGO_BADI. Thanking you

  • In FAGLL03 GL related Vendor name display

    Hi
    When i execute report in FAGLL03 for retention account, is it possible to display GL related vendor name feild  in FAGLL03 report?

    Dear:
                Make use of BTE with help of ABAPER, Use BTE 00001650 as new entry in FIBF. You can add vendor name by creation of Z function with same parameter as of LINE_ITEMS_GET_GKONT.
    Regards

  • Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

    Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

    THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??

  • Creation of Sales org views for customers related to vendor

    Hello All,
                 Can any body tell me is there any functional module which can be used to created the sales org views for customers related to vendors.
    Regards
    Srinivas

    Hi Ravi,
    the number of sales area possible would be 6 sales area,
    yes you can of course use the common master data functionality
    After creating the organizational structure and relevant master records you want to use as the masters, that is, in the distribution channels and divisions you are going to use as a reference, you can group distribution channels and divisions separately for master data (which combines customer master and material master records), group condition records, or both master data and condition records.
    Letu2019s say you have a product range that is not different for the four different distribution channels you have (the channels could be telesales, retail, industry, and wholesale.) Neither is there a difference in the customersu2019 details when they purchase through one or the other. Thus, you will not want to create a multiple of four views of customer master and material master records. Merely create the customer master records and material master records in one of the distribution channels, such as retail. Then assign the other distribution channels you created in the organizational structure setup to this one.
    Donu2019t forget this means you can only create or change master data in the distribution channel that is being referenced. In the scenario above, this means you can only change data for the retail distribution channel. Even if you should access a customer or material master in change mode, press F4 (possible entries), and select telesales, industry, or wholesale, you will receive a message u201CSales area is not defined . . . u201D
    The same is true for the sharing of conditions. If conditions are shared, you need only create a condition in the distribution channel or division you are using as the reference. Obviously, this only pertains to conditions that have the distribution channel and/or division in their key, such as a price based on sales area
    Revert if helpful
    Mohit Singh

  • Display of vendor name after giving  different freight vendor in me21n

    We have maintained a different vendor for freight in the PO at condition type level in me21n(conditions tab If we double click on that particular condition type we can see vendor where vendor can be given).We need to display vendor name seperately with respect to vendor code adjacent to that.
    Pl provide me the solution to do this.Which is the best way to bring vendor name in that screen.
    Provide me if any screenexits are possible?

    We have maintained a different vendor for freight in the PO at condition type level in me21n(conditions tab If we select particular condition type and click on conditional details icon we can see vendor where vendor can be given).We need to display vendor name seperately with respect to vendor code adjacent to that.
    Pl provide me the solution to do this.Which is the best way to bring vendor name in that screen.
    Provide me if any screenexits are possible?
    I need to dispaly the vendor name at the space before the vendor and vendor code are shown.
    Me21n-->give item and its details>item conditions tab---->select particular condition type -
    >click on Conditional details icon.There at the end right hand side vendor field is present where we can give vendor code.Beside the vendor field i need to display that given vendor code related name.So that user won't make any mistakes in giving the vendor code.

  • Display Vendor Name In PO Item Condition In Item Details

    Hi,
    Process is, if we have created to PO (ME21N) and given XX Vendor in Header and ZZ Vendor Code has maintained as per condition wise in line item wise in condition tab in item details but not shows ZZ Vendor Name.
    I want to display the Vendor Name in item details.
    Please tell me, How to display the vendor Name?
    If any User Exit or other option through.
    Devendra

    Thanks for Reply, as suggested by you, I have checked with ABAPer maybe this enhancement use for new tab in PO
    I need to display the vendor name at the space before the vendor and vendor code are shown.
    Me21n-->give item and its details>item conditions tab---->select particular condition type -
    >click on Conditional details icon. There at the end right hand side vendor field is present where we can give vendor code. Beside the vendor field i need to display that given vendor code related name. So that user won't make any mistakes in giving the vendor code
    Pl provides me the solution to do this. Which is the best way to bring vendor name in that screen?
    Devendra

  • In Payment Order Vendor Name Display

    Hi All,
    Is it Possible to view the Vendor name in the Payment order, as now we able to see the vendor code only.
    We required vendor name in the payment order(F110).
    Anyone have idea pls update me.
    Regards,

    hi,
    If you are talking about report output then Open your query in query designer, click on vendor, on the right hand side you will see display tab and in display as list box choose key and text. This will display your vendor name as well with its code.
    Hope this helps
    regards,
    ray

  • Vendor name not showing correctly in TDS GL line item display fbl3n

    Hi Gurus,
    I am facing an issue in regards to TDS. As you know that normally we make a cheque payment to a vendor, we issue one cheque for one vendor.
    But my client follows a slightly different practice. Suppose they have to pay an amount of 30000 to three vendor A B C equally 10000 each. They right a self cheque to the SBI bank and also send them the list of these 3 vendors who are also having their account in the same bank. They instruct the bank to take money from their  account and then credit in the respective vendors account.
    Now the transaction goes like this:
    Vendor A   10000
    Vendor B    10000
    Vendor C   10000
        To Bank                 29700
        To TDS on A              100
        To TDS on B              100
        To TDS on C              100
    Now when the user will go to FBL3N and check the TDS GL 100020196 and see the line items it should show like as per the client:
    Vendor A       100
    Vendor B       100
    Vendor C       100
    But it shows the below result:
    Vendor A   100
    Vendor A   100   ( should be vendor B)
    Vendor A   100   (should be vendor C)
    I believe that is the standard behavior of the system to show the vendor line. They do not want to change the way of their posting and their concern is if it shows like the same at the time of return filing how will know vendor wise tds.
    Now either I need to resolve this situation in FBL3N or give them a report which should give them Vendor wise TDS information for the TDS filing.
    J1INMIS report is there but it shows only the TDS and the vendor number, it does not give the vendor name. I either want a solution of this issue in FBL3N or a report which shows vendor wise TDS with vendor number and name. Please let me know if there is a solution to this issue.
    Kindly consider this very urgent.  I am attaching the relevant screenshots.
    Thanks
    Urmila

    Hi
    Unfortunately there is no report in SAP other than J1INMIS which caters to Indian reporting requirements. You can think of enhancing the same.
    Also check your enhancement for FBL3N as to why it is not working as it should with the help of your ABAP Colleagues. It is not displaying the name correctly.
    Thanks & regards
    Sanil Bhandari

  • Display key and text in variable selection screen.

    Hi:
    I have a variable in the Var.selection screen. and I cannot have the text displaying. Only the key is coming.
    - I have checked "Provider-Specific Properties" in RSA1 and is ok. and display attributes in Query Designer as well.
    Infio: The Characteristic is used in the same query as a Free Char. and there is displaying Key+Text correctly...
    any idea in what else to check.?
    Regards.

    Hi,
    Do you mean that the value help of that variable is not showing the Text values in the selection screen.It shows only the values in "Key"
    If this is the case,then invoke the value help of that variable->Click "Settings"->"General Display" tab->Select "Default(Text)" and click OK.The values will be listed in "Text" rather than "Key"
    Rgds,
    Murali

  • Vendor name in g/l line item display

    Hi,
    I have a requirement to get the name of the Vendor in line item display of Rec. G/L code. In standard reports FBL1N and FAGLL03 we can get only vendor code. Is there any possibility to insert the vendor name in standard report or any alternative report available in the system.

    Hi Sridhar,
    If you want to display the report on the system, then you may look at the options suggested above by other friends.
    If your requirement is to download the report, then you can have a vendor list seperately, download the normal FAGLL03 report and run a simple vlookup function and get the names of the vendors.
    Regards,
    Mike

Maybe you are looking for