Displaying a group of data in different colums

I have a problem with displaying a group of data in different colums. I want to display a group of data like this:
Column 1 --- Column2 ----- Column3
data1 data6 data11
data2 data7 data12
data3 data8 data13
data4 data9 data14
data5 data10 data15
That is, the coulm headers must be at the same height of the page and data must be in paralell columns.
My number of data is variable depending on a query result, and I want to start displaying my group on the first column and when it is full (the number of records per column is fixed), is must switch into the next one.
In case there were more than 15 records, the 16th and the followings, must be displayed on the next page, with the same format as i have explained before.
Thank you very much.

Send me all files along with expected output at [email protected]

Similar Messages

Displaying a group of data in different Pages

Hello
I will try to explain my Problem below briefly
I have a problem with displaying a group of data in different Pages.I want to display a group of data like this:
page1      page2
data1Part1      data1Part2
Page3     Page4
data2Part1      data2Part2
Page5     Page6
data3Part1      data3Part2
page 7     Page 8
data4Part1      data4Part2
What I get is :
page1      page2
data1Part1      data2Part1
Page3     b]Page4
data3Part1      data4Part1
Page5     Page6
data2Part2      data3Part2
page 7     Page 8
data4Part2      data4Part2
I test <?for-each-group@section:ROW?> and Different first page etc. It doesn't work.I would appreciate your help. I can send you the output, template and xml doc, if you can have a look at it.
Thanks

Send me all files along with expected output at [email protected]

Combining 2 readings into a waveform chart/graph displaying continuous readings of data from different sources

Hi,
In the file
(Serial Read and Write to .tdms & Compare on Graph – test.vi) I am trying
to integrate the following two waveforms into a single waveform: Realtime
reading and Waveform chart (open vi to see). Both of them display speed vs time
but from different outputs. One comes from an excel file (Teraterm – Results.xlsx
– sheet 4, (column 3:row 4) to (column 3:row 1878)) and the other comes from
the Serial input which is in Hex format and is split to get the various readings
of speed, voltage etc. I have already wired speed to a variety of waveform
outputs, but all result in broken wires.
The readings are taken in by the program
and but I am unable to wire the two readings together into one graph.
Please do let me know as to how can I make this work.
Thanks in Advance.
Best Regards,
Akhil
Kumar Meesala (Mr.)
Year
4 | Undergrad | Mechanical Engineering
National
University of Singapore
Email:
[email protected]
Mobile:
(+65) 9326 7069
Solved!
Go to Solution.
Attachments:
Serial Read and Write to .tdms & Compare on Graph - test.vi ‏58 KB
Teraterm - Results.xlsx ‏593 KB

Dear GerdW,
I'm sorry again about the misspelling your nick.
I tried connecting a waveform chart to the two terminals (speed from the DAQ and speed from the excel file) but I was unable to get the connection right. I understand that charts are used for readings which are equally spaced out, whereas XY graphs are used when the readings are not be spaced out uniformly. But I am unable to wire the connections correctly.
Actually the DAQ device continuously sends out data through the serial port. So I would not run out of data . Are you referring to the data coming from the DAQ device or the excel file? I actually have not thought of what would happen when the excel file would run out of values I am just hoping for the software to run till then for now
I have cleared up the wires as well Thanks for your help.
Best Regards,
Akhil Kumar Meesala (Mr.)
Year 4 | Undergrad | Mechanical Engineering
National University
of Singapore
Email: [email protected]
Mobile: (+65) 9326 7069
Attachments:
Get Excel Values.vi ‏25 KB
read_excel_values.llb ‏201 KB
Serial Read and Write to .tdms & Compare on Graph - test.vi ‏79 KB

Group xml data from different sql queries in data template

Hello,
I need to do a mailing program with bursting that sends differents alerts in one mail.
For example i can have alerts for late orders, alerts for shipping not confirmed, so really different address (I dont want to use union). I have done three sql statement in data template , it gives the following ouput.
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
<ALERT>
</ALERT>
</G_ALERTS_1>
</GA_EMAIL>
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
</G_ALERTS_1>
</GA_EMAIL>
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_2>
</G_ALERTS_2>
</GA_EMAIL>
I woud like the bursting or data template to group alerts when email is the same, because here it sends an email for each different alert.
Ideal output would be:
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
<ALERT>
</ALERT>
</G_ALERTS_1>
<G_ALERTS_2>
</G_ALERTS_2>
</GA_EMAIL>
But I don't know how to group different sql statements on a common field (email)
Any ideas ?
Thanks

the for-each group works well in a rtf template, but the rtf template is only applied after the bursting (in order I get first data template (instead of a report) -> bursting -> rtf template)
I want to be able to group xml data from the data template, so I can do bursting (by email ) but only once per mail.

Displaying Two groups of data side by side

We are using XML Publisher 5.6.2. We have a requirement where we need to display two independent groups side by side.
What we tried was, we had a single table, on which on the same row, we defined the first group ( for-each:group1)<?Col1?><end-each>, in a single cell as part of three different form fields and then in the second column, we started the next group.
But when we ran the report, the second group does not get dsiplayed. The workaround we have to use is that define the second group in a seperate row than the first group. This displayed the data for both the groups.
The issue is that, if Group1 has 10 rows, then my second group will be pushed down.
Has anybody had this issue and if there is a resolution, please let us know.
Thanks,
- Vasu K -

hi this is mohan,
I would Like to display the data in single table. i have 10 groups when i m trying the columns becoming null. when i m taking it in diff tables its working fine but my client is not satisfied with that is there any solution for this making it in one table.
Regards&Thanks
Mohan.katepalli
Path Infotech Limited

How to group measurement data into different groups using TDMs

Hi, frnds!
I have designed a labview program for measuring the power current characteristics of a laser diode. I want to save the current and power arrays measured at different temperatures in different groups. I tried to implement this but I was not successful. The current and power measurements at different temperatures are being saved only in the first group and the rest are being empty! Please help me save the measurements in different temperature groups.
I need this urgently!
Thanks in advance!
Kumar

Perhaps a snippet of the code you are using would help. When you write to the TDMS file with the low level functions, you just need to specify the separate group names. Have you read over the NI TDMS File Format, Introduction to LabVIEW TDM Streaming VIs, and Writing TDM and TDMS files articles? Have you tried any examples out of the Example Finder?
As a basic example:
Certified LabVIEW Developer

Displaying a group of data or info for the given key in a property file

Hi,
I have a property file suppose queries.properties.
it contains the propertys and values as
profile_1=abc
profile_2=dfg
profile_3=ser
name_1=qwe
name_2=dfg
name_3=cbvb
my requirement is when i pass the key profile then it has to give
profile_1=abc
profile_2=dfg like all profile related properties and its values.

it should display all the profile related keys and its corresponding values.
the reason behind this requiremnt is to improve the performance .
if we pass key then at a time we will get the value of that key.
but if ihave set all the profile related properties and its values then i need to get all at once .

How to display rows of data into different columns?

I'm new to SQL and currently this is what I'm trying to do:
Display multiple rows of data into different columns within the same row
I have a table like this:
    CREATE TABLE TRIPLEG(
        T#              NUMBER(10)      NOT NULL,
        LEG#            NUMBER(2)       NOT NULL,
        DEPARTURE       VARCHAR(30)     NOT NULL,
        DESTINATION     VARCHAR(30)     NOT NULL,
        CONSTRAINT TRIPLEG_PKEY PRIMARY KEY (T#, LEG#),
        CONSTRAINT TRIPLEG_UNIQUE UNIQUE(T#, DEPARTURE, DESTINATION),
        CONSTRAINT TRIPLEG_FKEY1 FOREIGN KEY (T#) REFERENCES TRIP(T#) );
    INSERT INTO TRIPLEG VALUES( 1, 1, 'Sydney', 'Melbourne');
    INSERT INTO TRIPLEG VALUES( 1, 2, 'Melbourne', 'Adelaide');
The result should be something like this:
> T# | ORIGIN | DESTINATION1 | DESTINATION2
> 1   | SYDNEY | MELBORUNE     | ADELAIDE
The query should include the `COUNT(T#) < 3` since I only need to display the records less than 3. How can I achieve the results that I want using relational views???
Thanks!!!

T#
LEG#
DEPARTURE
DESTINATION
1
1
Sydney
Melbourne
1
2
Melbourne
Adelaide
1
3
Adelaide
India
1
4
India
Dubai
2
1
India
UAE
2
2
UAE
Germany
2
3
Germany
USA
On 11gr2, you may use this :
SELECT t#,
         REGEXP_REPLACE (
            LISTAGG (departure || '->' || destination, ' ')
               WITHIN GROUP (ORDER BY t#, leg#),
            '([^ ]+) \1+',
            '\1')
    FROM tripleg
    where leg#<=3
GROUP BY t#;
Output:
1 Sydney->Melbourne->Adelaide->India
2 India->UAE->Germany->USA
Cheers,
Manik.

Not able to display data in different columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

Displaying a SharePoint List in a ListView Control with Grouping by Date

Dear All
I have created a ListView to display items from a SharePoint list:
<asp:ListView ID="UpAndComingEventsLV" runat="server">
<LayoutTemplate>
<ul>
<li id="itemPlaceholder" runat="server" />
</ul>
</LayoutTemplate>
<ItemTemplate>
<li id="Li1" runat="server">
<asp:Literal ID="CurrentDate" runat="server" />
<%#Eval("Title")%> <%#Eval("Event_x0020_Category")%> <%#Eval("EventDate", "{0:HH:mm}")%>
</li>
</ItemTemplate>
</asp:ListView>
To perform the binding and then display the date I'm doing the following:
Using oSiteCollection As New SPSite(_ListPath)
Using web As SPWeb = oSiteCollection.OpenWeb()
List = web.GetList(_ListPath)
End Using
End Using
Dim Query As New SPQuery
Query.Query = "<Where><And><Eq><FieldRef Name='Status' /><Value Type='Choice'>Approved</Value></Eq><Geq><FieldRef Name='EventDate' /><Value Type='DateTime'><Today Offset='4' /></Value></Geq></And></Where><OrderBy><FieldRef Name='EventDate' /></OrderBy>"
'Query.RowLimit = 1
Query.ViewFields = "<FieldRef Name='Event_x0020_Category' /><FieldRef Name='Title' /><FieldRef Name='EventDate' /></ViewFields>"
Dim ItemColl As SPListItemCollection = List.GetItems(Query)
UpAndComingEventsLV.DataSource = ItemColl.GetDataTable
UpAndComingEventsLV.DataBind()
dfgdfgfg
I would like to group my events by date though, rather than display the date against each row. To make things even more complicated, I would like to use friendly names like Today, Tomorrow, Monday, Tuesday instead of dates:
TODAY
Event number one
Event number two
Event number three
TOMORROW
Event number 4
Event number 5
MONDAY
Event number 6
Event number 7
At the moment, I've created a ItemDataBound event on the ListView control and I have been able to display the Today, Tomorrow, Monday etc bit but I can't figure out the best way to perform the grouping. Incidentally, I only want to group on the date not
on time:
Private Sub UpAndComingEventsLV_ItemDataBound(sender As Object, e As Web.UI.WebControls.ListViewItemEventArgs) Handles UpAndComingEventsLV.ItemDataBound
If e.Item.ItemType = Web.UI.WebControls.ListViewItemType.DataItem Then
'Retrieve data item
Dim DataItem As ListViewDataItem = DirectCast(e.Item, ListViewDataItem)
Dim RowView As DataRowView = DirectCast(DataItem.DataItem, DataRowView)
Dim EventDate As DateTime = RowView("EventDate")
'Get literal control
Dim CurrentDate As Literal = e.Item.FindControl("CurrentDate")
'Display friendly date
If Not IsNothing(CurrentDate) Then
Select Case EventDate.Date
Case Is = Now.Date
CurrentDate.Text = "Today"
Case Is = Now.Date.AddDays(1)
CurrentDate.Text = "Tomorrow"
Case Is = Now.Date.AddDays(2)
CurrentDate.Text = Now.Date.AddDays(2).DayOfWeek.ToString
Case Is = Now.Date.AddDays(3)
CurrentDate.Text = Now.Date.AddDays(3).DayOfWeek.ToString
Case Is = Now.Date.AddDays(4)
CurrentDate.Text = Now.Date.AddDays(4).DayOfWeek.ToString
Case Is = Now.Date.AddDays(5)
CurrentDate.Text = Now.Date.AddDays(5).DayOfWeek.ToString
Case Is = Now.Date.AddDays(6)
CurrentDate.Text = Now.Date.AddDays(6).DayOfWeek.ToString
End Select
Else
CurrentDate.Text = "-"
End If
End If
End Sub
Please could you help me understand the best way to perform the grouping by date?
Any help or advice is greatly appreciated!
Many thanks
Daniel

When I've done this in the past I've always used a calculated field that translated the days into the groupings I wanted. You couldn't do quite the groupings that you list above, but it would give you categories to group on. You could then
apply the groupings in the base view. Then you could use the Row Databound event to change the labels on the Groupings at runtime to the ones you want to use.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to display data in different xl sheets-urgent

hi all,
i have an urgent requirement. any body can send me the sample code to display the data in different xlsheets.
thanks,
maheedhar.t

Hey do like this.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
    file_name                       = 'C:SAMitab1.xls'
    DATA_SHEET_NAME                 = 'First internal table'
TABLES
   DATA_TAB                        = itab1
   FIELDNAMES                      = fldnm1
* EXCEPTIONS
*   FILE_NOT_EXIST                  = 1
*   FILENAME_EXPECTED               = 2
*   COMMUNICATION_ERROR             = 3
*   OLE_OBJECT_METHOD_ERROR         = 4
*   OLE_OBJECT_PROPERTY_ERROR       = 5
*   INVALID_PIVOT_FIELDS            = 6
*   DOWNLOAD_PROBLEM                = 7
*   OTHERS                          = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
    file_name                       = 'C:SAMitab2.xls'
    DATA_SHEET_NAME                 = '2nd internal table'
TABLES
   DATA_TAB                        = itab2
   FIELDNAMES                      = fldnm2
* EXCEPTIONS
*   FILE_NOT_EXIST                  = 1
*   FILENAME_EXPECTED               = 2
*   COMMUNICATION_ERROR             = 3
*   OLE_OBJECT_METHOD_ERROR         = 4
*   OLE_OBJECT_PROPERTY_ERROR       = 5
*   INVALID_PIVOT_FIELDS            = 6
*   DOWNLOAD_PROBLEM                = 7
*   OTHERS                          = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if useful...
Cheers,
Sam

Most recent date from a colum, group by numbers.

I want to get the most recent 3 dates from a colum group by account numbers.
for a account number what are my 3 recent dates. i only need to see the 3 recent dates. for e.g
Account_number DATE
1011001002117010     010607
1011001002117010     010507
1011001002117010     300307
1011001002117010     010307
1011001009077015     010607
1011001009077015     010507
1011001009077015     300307
1011001009077015     010307
i want to pick up the 3 recent date from the date column
( 01/06/07,01/05/07,30/03/07 ) for both the account number.
Please help me with how do i get that using a select statement.
Thanks in advance
ahmed

Hi,
Use the following query. This may probably help.
select account_number, date
from
(select account_number, date, row_number() over (partition by account_number order by date desc) rn
from <your_table_name>)
where rn <= 3;
Regards,
MAK
Message was edited by:
user545088

Displaying data in different tabs

Hi all
In a webI report I want to display data in different tabs for different prompt values.
For ex: In the prompt window if enter one value for plant say ABC... data should display in a single tab
If I enter two values say ABC, DEF... data should display for two plants in two different tabs. one tab for ABC and another tab DEF.
Any inputs please and is this possible in webI?

Hi there. No, it isn't.
The underlying query is shared among all tabs (which are, annoyingly, technically called 'reports').
Since any prompts are defined in the query, they too are shared among all tabs.
Input controls, 'standard report filters', and 'simple report filters' are specific to individual tabs, and cannot affect other tabs, but won't 'pop up'.
You may want to look into hyperlinking between reports (read up on OpenDocument if you're not familiar with it) to allow users to move from one Webi report (technically called a 'document') to another.
This will allow you to have different prompts for different reports.

Displaying a group of data in different colums

Similar Messages

Maybe you are looking for