Displaying correct dimensions

This was posted previously in this forum....
"The Bridge metadata "dimensions in inches" value for pdfs and Illustrator files is always shown wrong (it appears to be calculated from the header bitmap instead of the displaying document properties) and it's not shown at all for InDesign files. I often have ads with several similar page layouts that I need to sort through, but Bridge is if no help and I have to open files to determine their properties. I can't see any additional metadata to display except for dimensions in cm, and that's wrong for pdfs, AI files, and is ignored for InDesign files too."
Does anybody has answer/solution for this ???
Thank You,
Jorge Spoerer from CHILE

Like Jim, I also generally use Icon view for folders containing images, and have the View Option to show item info selected. Column view will also show image dimensions (both of these work, provided the folder has been indexed by Spotlight).
If you want to see the dimensions, but also want to view the folder contents in List view, the best you can do is bring up the Inspector (Command-Option-i), expand the More Info section, then move down the list using the arrow key. The Inspector pane's contents change with each new selected item, and the More Info section includes the dimensions.
Francine
Francine
Schwieder

Similar Messages

Image not displayed correctly in image control at small zoom level

I am displaying an image in an image control with a zoom factor of ~0.015 and it appears as shown in image 1.jpg. When I zoom in a little more to ~0.016 the image is displayed correctly as shown in image 2.jpg. Both images are attached.
Why is the image displayed as a "grey strip" in the first image? What do I need to do to have the image displayed correctly at any zoom factor? I am using LV 2011 with the associated vision development module on Windows 7.
Thanks,
Jonathan-LV
Solved!
Go to Solution.
Attachments:
Image 1.jpg ‏133 KB
Image 2.jpg ‏152 KB

Hi Jonathan,
Did you try resizing your image dimensions, as I suggested in my previous post? Anti-aliasing is an expected behavior; as you zoom out, the image has to be resampled in order to be displayed properly. At some point, LabVIEW assumes that the image has been resampled to the point where it no longer resembles the initial image, and so it greys the image out. In the case of your image, that is not the case. As I said, I believe an acceptable workaround would be to use IMAQ resample to half or quarter the pixel dimensions of your image, at which point it should be able to be displayed at a higher zoom factor.
Best,
Dan N
Applications Engineer
National Instruments

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Raw images do not display correctly in Yosemite

Since installing Yosemite onto My MacBookPro I find some of the images in my RAW library no longer display correctly in Bridge and Photoshop. I am running Bridge 5.0.2.4 and Photoshop 13.0.6 x 64. These same images display correctly in other image viewing software e.g. Digital Photo Professional, Image Browser and Yosemite Finder.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Group Layout- Button not displaying correctly

Hello all,
I am having a problem with group layout and having a button display incorrectly. Here is my code:
     public HRES_AboutBox(){
          initComponents();
     private void initComponents(){
          //--------Set-Up---Frame------------
          frameLocation = Toolkit.getDefaultToolkit().getScreenSize();
          frameWidth = frameLocation.width;
          frameHeight = frameLocation.height;
          aboutFrame = new JFrame(FRAMETITLE);
          aboutFrame.setPreferredSize(new Dimension(487,212));
          aboutFrame.setLocation(frameWidth / 4, frameHeight / 4);
          aboutFrame.setMaximumSize(new Dimension(800,600));
          aboutFrame.pack();
          aboutFrame.setVisible(true);
          aboutFrame.setDefaultCloseOperation(EXIT_ON_CLOSE);
          aboutFrame.setTitle(FRAMETITLE);
          setupComponents();
private void setupComponents(){
     //--------Set-Up---Button------------
     closeButton = new JButton();
     closeButton.setName(BUTTONNAME);
     //--------Set-Up---Logo------------
     picURL = HRES_AboutBox.class.getResource("/testLogo.jpg");
     appPic = new ImageIcon(picURL);
     //--------Set-Up---Labels------------
     appTitleLabel = new JLabel();
     versionLabel = new JLabel();
     appVersionLabel = new JLabel();
     vendorLabel = new JLabel();
     appVendorLabel = new JLabel();
     homepageLabel = new JLabel();
     appHomepageLabel = new JLabel();
     appDescLabel = new JLabel();
     imageLabel = new JLabel();
     appTitleLabel.getFont().deriveFont
        (appTitleLabel.getFont().getStyle()| Font.BOLD, appTitleLabel.getFont().getSize() + 4);
     appTitleLabel.setText("T.E.S.T - Test Text for Label");
        appTitleLabel.setName("Application Title Label");
     versionLabel.getFont().deriveFont
       (versionLabel.getFont().getStyle() | Font.BOLD, versionLabel.getFont().getSize() + 4);
        versionLabel.setText(VERSIONLABELSTRING);
        versionLabel.setName("Version Label");
        appVersionLabel.setText(APPVERSIONLABELSTRING);
        appVersionLabel.setName("Application Version Label");
        vendorLabel.getFont().deriveFont
       (vendorLabel.getFont().getStyle() | Font.BOLD, vendorLabel.getFont().getSize() + 4);
        vendorLabel.setText(VENDORLABELSTRING);
        vendorLabel.setName("Vendor Label");
        appVendorLabel.setText(APPVENDORLABELSTRING);
        appVendorLabel.setName("Application Vendor Label");
        homepageLabel.getFont().deriveFont
        (homepageLabel.getFont().getStyle()| Font.BOLD, homepageLabel.getFont().getSize() + 4);
        homepageLabel.setText(HOMEPAGELABELSTRING);
        homepageLabel.setName("Homepage Label");
        appHomepageLabel.setText(APPHOMEPAGELABELSTRING);
        appHomepageLabel.setName("Application Homepage Label");
        appDescLabel.setText(APPDESCLABELSTRING);
        appDescLabel.setName("Application Description Label");
        imageLabel.setIcon(appPic);
        imageLabel.setName("Image Label");
        //--------Set-Up---Layout------------
        layout = new GroupLayout(aboutFrame.getContentPane());
        aboutFrame.getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
                 layout.createParallelGroup(GroupLayout.Alignment.LEADING)
                 .addGroup(layout.createSequentialGroup()
                     .addComponent(imageLabel)
                     .addGap(18, 18, 18)
                     .addGroup(layout.createParallelGroup(GroupLayout.Alignment.TRAILING)
                         .addGroup(GroupLayout.Alignment.LEADING, layout.createSequentialGroup()
                             .addGroup(layout.createParallelGroup(GroupLayout.Alignment.LEADING)
                                 .addComponent(versionLabel)
                                 .addComponent(vendorLabel)
                                 .addComponent(homepageLabel))
                             .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                             .addGroup(layout.createParallelGroup(GroupLayout.Alignment.LEADING)
                                 .addComponent(appVersionLabel)
                                 .addComponent(appVendorLabel)
                                 .addComponent(appHomepageLabel)))
                         .addComponent(appTitleLabel, GroupLayout.Alignment.LEADING)
                         .addComponent(appDescLabel, GroupLayout.Alignment.LEADING, GroupLayout.DEFAULT_SIZE, 329, Short.MAX_VALUE)
                         .addComponent(closeButton))
                     .addContainerGap())
          layout.setVerticalGroup(
                 layout.createParallelGroup(GroupLayout.Alignment.LEADING)
                 .addComponent(imageLabel, GroupLayout.PREFERRED_SIZE, GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                 .addGroup(layout.createSequentialGroup()
                     .addContainerGap()
                     .addComponent(appTitleLabel)
                     .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                     .addComponent(appDescLabel)
                     .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                     .addGroup(layout.createParallelGroup(GroupLayout.Alignment.BASELINE)
                         .addComponent(versionLabel)
                         .addComponent(appVersionLabel))
                     .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                     .addGroup(layout.createParallelGroup(GroupLayout.Alignment.BASELINE)
                         .addComponent(vendorLabel)
                         .addComponent(appVendorLabel))
                     .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                     .addGroup(layout.createParallelGroup(GroupLayout.Alignment.BASELINE)
                         .addComponent(homepageLabel)
                         .addComponent(appHomepageLabel))
                     .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED, 19, Short.MAX_VALUE)
                     .addComponent(closeButton)
                     .addContainerGap())
          pack();
     public void closePasswordBox(){
          dispose();
     public static void main(String [] args){
          HRES_AboutBox hra = new HRES_AboutBox();
          if(hra.isVisible() == false){
               hra.setVisible(true);
}When I run this it comes out fairly alright but the button in the lower right corner does not display correctly, i have tried setting the size of the button but that does not solve the problem. If anyone can give any advice or info on how to get it to display right I would appreciate it.

Hi,
I usually only use the GroupLayout when using a GUI builder like the one in NetBeans.
If I need to layout something manually I usually use a combination of the other layout managers.
Sometimes I combine the two: eg. static layout with the GUI builder, dynamic layout by hand
But if you want to use the GroupLayout manually, check:
http://java.sun.com/docs/books/tutorial/uiswing/layout/group.html
Otherwise check:
http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html

Div header tag - not displaying correctly

I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
The header contains three images; a logo, a banner (text), and a picture of a castle. These should display in a line.
When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc.
So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px). I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels). There is no padding/borders defined. Therefore the total should be well within the 960 width (?).
It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop). It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
If I set my container width much smaller, most of the screen will be green (the body) in big screens.
If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
Do I need to define the width of the header (as well as the container)?
Help! Thank you
http://hertfordcarnival.org.uk/dev/Index.html

Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean? One image in from fireworks, and then ... ? Thanks again
Date: Wed, 7 Dec 2011 01:37:10 -0700
From: [email protected]
To: [email protected]
Subject: Div header tag - not displaying correctly
    Re: Div header tag - not displaying correctly
    created by osgood_ in Dreamweaver - View the full discussion
Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not! Why not just use one big image then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Splash screen does not display correctly

Hello everyone. I have a class which shows a spashscreen. When run from the main method it display the splash correcly.
I have a login module. When the login is sucessful , I call the splashcreen module. Here the problem arises. It just gives me the white background. The image is not there.
I also encounter this sort of problems when calling other panels from my mainpage. The panels have a background. When called for the first time they appear distorted. When a second time they are called( by clicking the menu button from my mainpage) everything displays correctly.
I am very confused with the above problem because there is simply no error in the coding. I can't see where the problem lies.
Please Please Help me! I'll be indepted to you all!

This is my class that I've written that works fine. Feel free to use it.
* SplashScreen.java created on May 14, 2003
* Copyright (c) 2003 Rene Peters Consultancy.
* This software is the confidential and proprietary information of Rene
* Peters Consultancy ("Confidential Information"). You shall not
* disclose such Confidential Information and shall use it only in
* accordance with the terms of the license agreement you entered into
* with Rene Peters Consultancy.
package nl.renepetersconsultancy.util.gui;
* An application to show a title screen in the center of the screen
* for the amount of time given in the constructor. This class includes
* a sample main() method to test the splash screen, but it's meant for use
* with other applications.
* @author Ren� Peters
* @version 1.0 May 14, 2003
import java.awt.Dimension;
import java.awt.Toolkit;
import java.net.URL;
import java.util.logging.Logger;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JWindow;
public class SplashScreen extends JWindow implements Runnable {
private Logger logger = null;
private int minimumDuration;
private String resource;
private boolean keepRunning = true;
private boolean waitForStop = true;
private boolean done = false;
* Constructor for the SplashScreen. Only used for initialisation. Nothing really happens yet.
* @param resource Location of the image (jpeg, gif, png or xbm)to be displayed in the SplashScreen.
* Image must be located somewhere on the classpath. E.g. "nl/petersconsultancy/planner/gui/logo.jpg".
* @param minimumDuration The time in milliseconds the SplashScreen will be displayed, at least.
* It can not be stopped before that. Values must be in the range [0, ->]. If smaller the 0 the will be
* set to 0.
* @param waitForStop Boolean to indicate if the object will be displayed after the minimumDuration has passed
* by calling the "pleaseStop" method or if it will stop being displayed anyway.
* background or the rest of the execution should hold for a while.
public SplashScreen(String resource, int minimumDuration, boolean waitForStop) {
logger = Logger.getLogger("nl.renepetersconsultancy.util.gui.SplashScreen");
     if (minimumDuration < 0) {
          this.minimumDuration=0;
     else {
     this.minimumDuration = minimumDuration;
this.resource = resource;
this.waitForStop = waitForStop;
Thread thread = new Thread(this);
thread.setDaemon(true);
thread.start();
* Check if the minimumDisplay time has elapsed already.
public boolean isDone(){
     return done;
* Request this from being displayed and have it removed.
public void pleaseStop(){
     keepRunning = false;
* Display the SplashScreen.
public void run() {
// Build the splash screen.
if (resource==null) {
logger.warning("The image to display in the SplashScreen is set to 'null'.");
return;
} else if (resource.equals("")) {
logger.warning("The image to display in the SplashScreen is set to an empty string.");
return;
URL URLImage = this.getClass().getClassLoader().getResource(resource);
if (URLImage==null) {
logger.warning("The resource for the image to display in the SplashScreen can not be found.");
return;
ImageIcon imageIcon = new ImageIcon(URLImage);
JLabel label = new JLabel(imageIcon);
// Set the window's bounds, centering the window.
// Take the dimension of the icon for reference.
int width = imageIcon.getIconWidth();
int height = imageIcon.getIconHeight();
Dimension screenDimension = Toolkit.getDefaultToolkit().getScreenSize();
int x = (screenDimension.width-width)/2;
int y = (screenDimension.height-height)/2;
this.setBounds(x,y,width,height);
JPanel content = (JPanel) this.getContentPane();
content.add(label);
// Display it while running for a while in the background.
this.setVisible(true);
try { Thread.sleep(minimumDuration); } catch (Exception e) {}
done = true;
if (waitForStop) {
     while (keepRunning) {
try { Thread.sleep(100);} catch (Exception e) {}
setVisible(false);
this.dispose();
public static void main(String[] args) {
SplashScreen splash = new SplashScreen("nl/renepetersconsultancy/util/gui/images/Ape.jpg",500, true);
while (!splash.isDone()){
try { Thread.sleep(50000); } catch (Exception e) {}
splash.pleaseStop();
System.exit(0);

Flash banner not displaying correctly

I am definitly a newbie to flash. Actually just gave the free download a try on this project. The trial ran out and that might be part of the reason why I can't figure out this problem.
I created a flash banner for a website, I have it embedded and it shows up, but it has cropped part of the scene, so the whole background image isn't showing. I have tried resizing in my html, but it doesn't seem to affect the cropping issue. You can view the site here.
Any help would be appreciated!
Margaret

If you cannot edit the file due to the trial period ending, I don't know what you can do except to purchase the software, but that will be unrelated to the banner not displaying what you expect.
I attempted to look at the page you linked, but the page is not loading, at least not quickly enough for me to feel comfortable waiting for it, so I passed on that.
A Flash file will display in its entirety regardlkess of what dimensions you specify in teh html code for it, it will just distort to fill the area defined for it. So the file is most liikely displaying correctly. What your problem might be is you might have placed an image in the banner without realizing that the stage defines the viewable dimensions you are limited to, so you may need to either adjust the size of the image to fit the stage, or adjust the stage size to suit the image.
It could be due to other reasons, but there isn't enough information about the design to determine as such.

Floating fields and fragment subforms in Outlook 2007 do not display correctly

I'm using LCES Forms 8.0 Update 1 to render a non-interactive HTML forms using dynamic content (customer info). The email appears ok in clients except in Outlook 2007.
The Floating text and Text Fields appear multiple times on the form (scattered around their placement point on the form) and the subform fragments are appearing with borders surrounding them.
I have heard that there are issues with Outlook 2007 not displaying HTML correctly. Is there a way to setup the Text Fields/Subforms in Designer so they display correctly in Outlook 2007?
Thanks!

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Non-English characters not displaying correctly - Serious Issue

My corporate email is on a Lotus Domino server with Lotus Traveler installed.
I have set my PlayBook (with OS 2) up to syncronize with the corporate email trough Active Sync (see http://alturl.com/qh3nn), which works perfectly.
I have however noticed that in some emails special non-english characters are displayed correctly but in some emails special non-english characters are displayed as a black diamond with a question mark inside.
This is of course a serious issue as most non English speaking countries use some special characters.
When trying to understand this problem how can I analyse the emails and see what character set is being used?
And of course better; has someone solved this?

I am having the same problem. Is there any update available?

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

Search box not displaying correctly in Safari

How can the search bar on the Apple site not display correctly in Safari? I find this odd that Apple would allow this. It displays like 2 search boxes overlapping each other. It still functions correctly but it is a little embarrassing since I am always bashing windows pro browser display.

Hi
Welcome to Apple Discussions
Might be a corrupted cache or cookies issue. First, go to Safari Preferences>Security>Show Cookies. Type Apple in the Spotlight panel. Highlight/remove the cookies. Then, go to the Safari Menu>Empty Cache. Try the Apple site.
If the double search panel still appears, go to the Finder: Your User Account>Library>Caches. There, move to the trash the com.apple.safari file. Restart Safari and try the Apple site again.
Post back

All of a sudden my yahoo email wont display correctly (shows some links for inbox etc but they arnt clickable and no emails are displayed) and the links on facebook (notifications, home etc) dont display but facebook content does.

Yahoo home page and yahoo email is not displaying correctly. It had been working fine until Saturday 9/10. When i load yahoo home page it will display content but some is not clickable and is not displayed correctly. In my email it will show the content on the left side (inbox, drafts etc and along the top (contacts, inbox etc) nothing can be clicked and no emails load or are shown. Facebook will load news feed content but will not display the icons at the left top (notifications, messages etc) they are clickable and work but the images just aren't there. Also not able to play games in facebook. The game loads up to 100% but never finishes. I dont go to many other website but i did check a few and they seem to be fine. May this be a website issue or firefox issue? i am able to use internet explorer to correctly see my email and facebook so assuming its a firefox thing.

Hi
Welcome, glad you got some benefit from the threads, it all so easy once you've done it a few times, aint it.
Glad your going well, now you can help others
you could also join the folding team and help medical research.
enjoy
cheers
jocko

Displaying correct dimensions

Similar Messages

Maybe you are looking for