Displaying different no. of records for a select Query for the same dbuser

Hi,
While querying from my machine after connecting to custom schema it is displaying 3000 rows.
When the same query was executed from different machine it is displaying just 31 records.
1. Connect as xxyy user and executed the below command
select count(*) from xxyy. XXYY_APAR_SUPP_CUST_MAST_V.
output is showing some 3000 records
2. Connect as xxto user and executed the below commands for a specific user and specific machine
select count(*) from xxyy. XXYY_APAR_SUPP_CUST_MAST_V.
output is showing just 31 records
Please help...!!

Hi,
I hope you would have resolved the problem, if not, next step could be to check the TNS on both machines because now i suspect that your TNS on other machine points to some idfferent database.
What do you mean by following
2. Connect as xxto user and executed the below commands for a specific user and specific machineSo you connect with different users? If yes, then from both machines, if you connect with the same user, is result same?
When the same query was executed from different machine it is displaying just 31 records.Please paste the TNs entry for the database from both of your client machines from where you run the query.
Salman

Similar Messages

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?
Attachments:
test2.vi ‏29 KB

It's because in case 2 you hold the array build result from the previous loop iteration in a shift register...in case 8 you do not...
You say that if you set the maximum number to three it will produce an array with three elements, that is not correct, it will run when the iteration index is 0,1,2 and 3...resulting in 4 elements. If you want 3 you need to decrement the maximum number to 2. The same goes for case 8.
MTO

When I drag a playlist from the list in the sources panel up to my iPod icon, the music is added immediately to my iPod. Are the rules different for this than for 'syncing' selected playlists to the same iPod?

I am trying to put music from two different libraries onto my iPod. In the first case, I can, but in the second, the program says it will erase all content and sync only the playlists Ihave checked. What in general is the method for loading an iPod with music from two different libraries?

Yes, if, you manually manage music and videos, iTunes syncs the content immediately. If you deselect “Manually manage music and videos,” the content you added manually is removed from iPod touch the next time iTunes syncs content. To transfer music from multiple computers, your device must be set to "Manually manage music," sometimes referred to as manual mode.
In general, follow these instructions for Using iPad or iPod with multiple computers, http://support.apple.com/kb/HT1202

Select query for every 1000 records

Hi all ,
Please help me in the issue . I am using select query Select * from table up to 1000 rows for acheving the records but i want this process to retrigger once the process of 1000 records is compleded again it needs to fetch the next 1000 records and process the same . I am changing the status of the processed records once it is processed . Can can one tell me how to retrigger the select query once the 1000 records are processes.
Thanks in advance,

Hi Eric,
After selecting the 1000 records, find the key value of the last record. Build up the range as GT. Again use the select query.
For example,
Select * into table lt_data from ztab
where key in r_key
up to 1000 rows.
regards,
Niyaz

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Can any one send select query for this?

Hi,
can any one plese send select query for the following query.please send as early as possible.
Loop through the I_BSID internal table to fill records in I_OUTPUT.Combine data from I_BSID, I_KNKK, I_KNKK_KNKLI, I_KNA1 and I_KNVV into I_OUTPUT based on the linking conditions .Field Description Source are
I_OUTPUT-BUKRS     Company code     I_BSID-BUKRS
I_OUTPUT-KUNNR     Customer number     I_BSID-KUNNR
I_OUTPUT-NAME1     Customer Name     I_KNA1-NAME1
I_OUTPUT-KNKLI     Credit account     I_KNKK-KNKLI
I_OUTPUT-KDGRP     Customer Group     I_KNKK-KDGRP
I_OUTPUT-KLIMK     Credit Limit     I_KNKK_KNKLI-KLIMK
I_OUTPUT-KVGR1     Business Unit     I_KNVV-KVGR1
I_OUTPUT-REBZG     Invoice Number     I_BSID-REBZG
I_OUTPUT-BLDAT     Invoice Date     I_BSID-BLDAT
I_OUTPUT-WAERS     Document Currency     I_BSID-WAERS
I_OUTPUT-DUE_DATE     Due Date     Based on below
Calculation
Get the Payment terms days combining I_BSID and I_T052 based on the linking conditions mentioned above.    Note : a) Baseline Date : If baseline date I_BSID-ZFBDT is blank , use the Document Date.b) Payment Term Days :If I_BSID-ZBD3T is not blank, take this as Payment Term Days for Due date calculation.
                   If I_BSID-ZBD3T is Blank, then get payment term days from I_T052 based on I_BSID-ZTERM. If there are more than one record in I_T052 for the given Payment term, get the day part from baseline date and select the first record where the day limit I_T052-ZTAGG is greater than the day part.If I_BSID-ZBD3T is blank and I_BSID-ZTERM is also blank, then take Y000 (Due Immediately) as Payment term and proceed with the above logic. Set the payment term field blank while printing.
Calculate Due date : For Debits, Determine Due Date = Baseline Date + Payment term Days(not discount days)                                                          For Credits Due date = Baseline date.Then, move the amount I_BSID-DMBTR to respective buckets (Not yet Due, Current Due, Past due 1-30, Past Due 31-60 etc.) Based on the due date.
Thanks&Regards,
praveen kumar.A

HI,
To get Open Items you can use Function module:
data:i_items TYPE STANDARD TABLE OF rfpos.
CALL FUNCTION 'CUSTOMER_OPEN_ITEMS'
EXPORTING
bukrs = p_bukrs
kunnr = wa_customer-kunnr
TABLES
t_postab = i_items
EXCEPTIONS
no_open_items = 1
OTHERS = 2.
Table I_items will have all the open items for that Customer in the given company code.
Well for Clear Items: Try
GET_CLEARED_ITEMS or FMITPOFM_CLEARED_ITEMS_GET.
Hope it helps.
Manish

For "select-form" in the same page, add a cancel button in editing status

Dear JHeadstart team
For "select-form" in the same page, I still have a trouble.
How can I customize the Tempalte File to make the editing page have cancel button to abandon the edit.
If I want to learn the the JHS's Template costomizing (.vm file) and where can I find more reference documents about JHS's Template costomizing (excepting "Oracle JHeadstart 10g for ADF Developer's Guide").
thanks!

Can you be more precise on what you want:
- should the cancel button be displayed when creating new row AND editing existing row?
- when pressing the Cancel button, where do you want to go, to the select page?
Steven Davelaar,
JHeadstart Team.

How do I record only a select portion of the screen?

I can't seem to figure out how to record only a select portion of the screen.

QuickTime X screen recording feature doesn't offer anything except the entire display.

Delete records in a table and at the same time print out for reference

I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone help

How about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3    from all_objects
4   where rownum <= 10
5 /
10 rows created.
SQL> declare
2     cnt pls_integer;
3 begin
4     delete from t;
5     cnt := sql%rowcount;
6     dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM

Select Query for smart form-invoice

Hi Folks,
I have to fetch the following fields as per the requirement for desiging a invoice smartform.I had copied lb_bill_invoice smartform into z format.
Can anyone here please give me the select query for the same.
fields to fetched are as follows:-
1.vbrp-arktx,
2.vbrp-fkimg,
3.konv-kbetr with respect to vbrk-knumv
4.konv-kwert.
And also what all I have to give in format interface and global definitions of the smartform.
please help me in this regard.
Points will be given.
K.Kiran.

Hi,
declare the variables V_arktx(40) and v_Qty like vbrp-fkimp and other varaibles for Kbetr, kwert, knumv on the global definitions.
select single arktx fkimg into (v_arktx, v_qty) from vbrp
where vbeln = LBBIL_IT_REFPURORD-BIL_NUMBER.
select single knumv into v_knumv from vbrk where where vbeln = LBBIL_IT_REFPURORD-BIL_NUMBER.
this select has to fire in the item level and in the loop.
so have to write in the correct place.
select kbetr kwert into (v_kbetr, v_kwert) from konv
where where knumv = v_knumv and kposn = LBBIL_IT_REFPURORD-ITM_NUMBER.
regards,
anji

How to write selection Query for the following requirment.

Hi All,
I am new to ABAP, I need a help ,
I need to select all plants(WERKS) from MARC at Plant/Material level,
then I need to take all sales organozation(VKORG) from T001w,
then I need the company code(BUKRS) from TVKO based on VKORG,
then I need the currency key(WAERS) from T001 based on BUKRS,
Can any one help me in writing selection Query for the same?
Thanks All,
Debrup.

Hi,
Its easy for you if you learn SELECT with JOIN to complete your task. So SEARCH the forum with SELECT statement and you will get a lot of examples using which you can write your own.
If you struck up anywhere revert back.
Regards
Karthik D

Select query for fetching from 3 tables.

Can we have a single Select query for fetching same fields (kappl,kschl,vkorg,vtweg,spart,kunwe,datbi,knuma,datab,knumh)
from 3 tables >> KOTE707,KOTE708 and KOTE709 into an internal table for a particular KUNNR?
Regards,
Shashank.

Hi,
If you have kunnr field in all the 3 tables then it is possible. use inner join as below
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
            p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
         fldate TYPE sflight-fldate,
         carrname TYPE scarr-carrname,
         connid   TYPE spfli-connid,
       END OF wa.
DATA itab LIKE SORTED TABLE OF wa
               WITH UNIQUE KEY fldate carrname connid.
SELECT c~carrname p~connid f~fldate
       INTO CORRESPONDING FIELDS OF TABLE itab
       FROM ( ( scarr AS c
         INNER JOIN spfli AS p ON p~carrid   = c~carrid
                              AND p~cityfrom = p_cityfr
                              AND p~cityto   = p_cityto )
         INNER JOIN sflight AS f ON f~carrid = p~carrid
                                AND f~connid = p~connid ).
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
<b>Reward Points if this helps,</b>
Satish

Short Dump for Dynamic Select Query

Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING    p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
                               <t> TYPE table.
DATA: it_fldcat    TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details   TYPE abap_compdescr_tab,
        wa_details   TYPE abap_compdescr.
DATA: ref_descr    TYPE REF TO cl_abap_structdescr.
DATA: new_table    TYPE REF TO data,
        new_line     TYPE REF TO data,
        wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
    CLEAR wa_it_fldcat.
    wa_it_fldcat-fieldname = wa_details-name .
    wa_it_fldcat-datatype = wa_details-type_kind.
    wa_it_fldcat-intlen    = wa_details-length.
    wa_it_fldcat-decimals = wa_details-decimals.
    APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
      SELECT * INTO TABLE <t>
               FROM     (p_table)
               WHERE    (tab_cond)
               ORDER BY (tab_ord).
ENDFORM.                    " GET_CCNUM_2

Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
*    CLEAR wa_it_fldcat.
*    wa_it_fldcat-fieldname = wa_details-name .
*    wa_it_fldcat-datatype = wa_details-type_kind.
*    wa_it_fldcat-intlen    = wa_details-length.
*    wa_it_fldcat-decimals = wa_details-decimals.
*    APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
*    EXPORTING
*      it_fieldcatalog = it_fldcat
*    IMPORTING
*      ep_table        = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table).   " New code by naren
Please Try this..
Thanks
Naren

I just bought 3 memberships for adobe creative cloud with the same ID, how can I install each membership in 3 different computers.

I just bought 3 memberships for adobe creative cloud with the same ID, how can I install each membership in 3 different computers.

Welcome to Adobe Forum,
You have CC for individual purchased which can be activated on two machines by the same Adobe ID.
How ever if you want to use it on more than two machine, you can cancel this order & buy the creative cloud for Team, in which you can buy the number of seats & assign them to as many user you would like to.
Each user can activate it two times with 100GB of space as compared to 20 GB space for CC for individual.
Regards,
Rajshree

Displaying different no. of records for a select Query for the same dbuser

Similar Messages

Maybe you are looking for