Displaying help for the application

I have made help button in the form, and when the user clicks it, it should display the contents of a particular file.
Can u guys suggest something..
thanx for ur time,
sharad

Hello,
BEGIN
if get_application_property(USER_INTERFACE) = 'WEB' then
Web.Show_Document('help_file.htm', '_BLANK');
else
Host('winhlp32 help_file.hlp');
end if;
END;
null

Similar Messages

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

Itune display "is waiting for the application to change the content"

I don't now why my itune display "is waiting for the application to change the content"??

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE

try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone

Warning:The EXPORT data cluster is too large for the application buffer.

Hi Friends,
I am getting following warning messages whenever I click on costing in "Accounting" tab.
1. Costing data may not be up to date Display Help
2. No costing variant exists in controlling scenario CPR0001
3. An error occurred in Accounting (system ID3DEV310)
4. The EXPORT data cluster is too large for the application buffer.
I can create project automatically from cprojects. PLan costs, budget and actuals maintain in WBS elements can be visible in cproject Object Links.
Your reply is highly appreciated.
Regards,
Aryan

Hi;
Please, check the Note --> 1166365
We are facing the same problem in R3, but apply this no fix it.
Best regards.
Mariano

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

F4 HELP for the field

HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.

The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST   FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field        = 'SETNAME'
dynpprog     = v_repid
dynpnr         =    SY-DYNR
dynprofield = 'P_CCGRP'
value_org    = 'S'
TABLES
value_tab   = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES:   BEGIN OF ty_match_nast,
                objky TYPE na_objkey,
                END OF ty_match_nast.
Data: it_match_nast   TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val   TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
       SELECT objky
        FROM   nast
        INTO TABLE it_match_nast
         WHERE kappl = c_ef
         AND   kschl = c_neu
         AND   usnam = wa_dypr_val-fieldvalue.
      ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'.      "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname             = sy-repid
      dynumb             = sy-dynnr
      translate_to_upper = 'X'
    TABLES
      dynpfields         = it_dypr_val_h.
*Pass the values to f4 table
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield     = u2018OBJKY'
        dynpprog    = sy-repid
        dynpnr      = sy-dynnr
        dynprofield = 'P_EBELN'
        value_org   = 'P'
     TABLES
        value_tab   = it_match_nast
        return_tab = it_return.

Error while setting up enviroment for the application

Hi,
Im getting a popup box displaying the error message
C:\WINDOWS\system32\ntvdm.exe
Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
When I try to excute an external exe, why am I getting this error? and is there a way of getting this exe to execute properly without the error?
Here my code for excuting the external exe
String[] cmd = {"C:/gen.exe", "C:/a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor(); "gen.exe" is the program i wish to execute and "a.zip" is the parameter i wish to excute it with.

class ExecRuntime {
public static void main(String args[]) throws Exception {
String[] cmd = {"C:\\gen.exe", "C:\\a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor();
} Here we need to use backslashes, because the command is passed to the OS as is.
If you need to be in C:\ to execute from command line, you will also need to use the
exec() version that allows you to specify the 'current directory'
Edited by: baftos on Mar 7, 2008 12:13 PM

Issue with F4 help for the variables for the 0CALWEEK and 0CALMONTH

We have custom IOs which refers to 0CALWEEK and 0CALMONTH.In the report we have variables on the custom IOs.For these variables F4 help does not giving any values .I tested with 0CALWEEK also. For the 0CALWEEK also F4 help does not working..Please help me on this issue.The variable I haveused d to test with 0CALWEEK is 0S_CWEEK.
Edited by: Sudhakar Are on Jul 6, 2010 4:17 PM

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

Providing F4 help for the same field on selection screen

Hello Experts,
My requirement is :
There are 2 radio buttons and a parameter "p_file" on my selection scree.
1. rb_appl
2. rb_pres
If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
I have written the code in the below manner
PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                         rb_pres RADIOBUTTON GROUP rad ,
                         p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
      PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
So please let me know how to define the F4 help for the same field based on the radio buttons.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

Display access for the tcode SCC4

Hi all,
I want only the display access for the tcode SCC4. In which authorization object I can do this.
Regards,
R.Suganya

Good Afternoon yes you can goto transaction SU24 insert transaction SCC4 and execute, click on display indicator, and you will see the object S_TABU_DIS assign activity value (03) to your role for this object which has that transaction SCC4 assigned to it. Also make sure that no other roles for that user has this object other wise the values will overwrite it.
Make sure you have locked transaction code OY24 as its a duplicate of SCC4.
Hope this helps
Edited by: nadim razaq on Sep 17, 2008 4:13 PM

Oracle Help for the Web 2.0 Production

Oracle Help for the Web 2.0 is now available on OTN Downloads.
Oracle Help for the Web (OHW) 2.0 is a major update to the previous releases OHW 1.1x and OHW 1.0.x, and is designed and recommended to replace both.
Some of the new features in 2.0 include the following:
Support for Bookmarking Navigator Pages
OHW 2.0 no longer uses frames to store navigational state on the webpage. Each navigator stores its complete state on the URL, allowing each page to be bookmarked. This includes TOC locations, keyword locations, and search runs. In the view topic page, the frame information is also saved, allowing a user to forward the link via email, etc to the displayed topic. In addition, if you navigate to a named anchor within a topic page, this page position is also saved and is bookmarkable.
Multiple Locale Support in a Single Instance
OHW 2.0 can now support multiple locales in the same servlet instance. After you register the helpsets in the OHW configuration file, the OHW servlet will automatically determine the best locale to use for a user request (based on browser settings and what locales are available), and display the localized helpset (along with a localized OHW chrome) to the user. This feature also means that if you navigate to a topic in English, and then send the link via email to a user whose browser supports Japanese, if the Japanese helpset is registered, the topic link will appear in Japanese to the second user.
Search Engine Support
OHW has been specially designed so that search engine crawlers can reach all hosted content (including table of contents, and index pages) and easily traverse within and between the available navigators. Page titles have also been redesigned to make pages easier to locate from within a search engine result set.
Ability to Share Resources Across Localized Helpsets
OHW can be configured so that helpsets can share resources such as images and CSS stylesheets. Since each localized helpset no longer needs its own resources, this can dramatically reduce the size of the deployed file.
Relative Content Locations
Content locations can now be specified relative to the OHW configuration file.
True Popup Support
OHW now properly supports Oracle Help popup links. Following this link will bring up a dynamic draggable DHTML window (or a normal popup window if the browser does not support it) with the requested topic page.
All Level Merging in the Table of Contents
Using the default TOC engines, each level of the TOC will merge like elements together. This change reflects modifications made to core Oracle Help classes and mimics the feature added to Oracle Help for Java (OHJ).
New Tree-based Table of Contents Navigator
The Tree-based TOC navigator shows the data in a heirarchical fashion and allows the user to see the full TOC (and not just a limited part of the TOC, as with previous versions of OHW). The tree-based TOC navigator is a standard navigator and can be added by including it in the helpset configuration file.

Yes, I am now able to access this page and download OHW.
Thanks very much,
Lucie

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

F4 help for the batch field in VL02N transaction

We have upgraded our system from 4.6 to ecc 6.0 .In 4.6 the f4 help for the batch had " Batch selection via plant/Material/Storage location/Batch " which is not there in ECC 6.0.
Please tell us the procedure to add in the existing search help H_MCHA in ECC 6.0
Thanks
Aruna

Hi Aruna.
Create ur own search help using se11 tcode for required fields.
Thanks & Regards,
Kiran.
Plz give rewards if and only if it is helpfull.

Displaying help for the application

Similar Messages

Maybe you are looking for