Displaying JDialog box in front of all windows

Hi guys,
I am trying to display a Dialog box with some error message.
I did it using the following code
import java.awt.*;
import javax.swing.*;
public class JDialog_test {
     public static void main(String args[])
          Frame oframe=new Frame("JDialog Error Message");
          JDialog odialog=new JDialog(oframe,"Praveen",true);
          odialog.setModal(true);
          System.out.println("the modal is set as "+odialog.isModal());
          //odialog.setAlwaysOnTop(true);
          odialog.setVisible(true);
          System.out.println("In displayable is set as "+odialog.isDisplayable());
          odialog.toFront();
When i run the above code, a dialog box is created successfully.
But the problem is the dialog box is not displayed in front of all screens.
Also the dialog box disappears when i open another window.
Now what i require is???
->the dialog box should be displayed on top of all the windows
->as long as the dialog box is not closed , i should not be able to access other windows
Please don put the setModal() method as solution, it isnt working.
Also i want the solution to be compatible with only java 1.4 compiler.
Please get back with solutions.

import java.awt.Dimension;
import javax.swing.*;
public class JDialog_test {
     public static void main(String args[])
          JFrame jframe=new JFrame("JFrame");
          jframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          jframe.setVisible(true);
          jframe.setSize(new Dimension(200,300));
          JDialog jdialog=new JDialog(jframe,"JDialog",true);
          jdialog.setModal(true);
          jdialog.setSize(new Dimension(100,200));
          jframe.setVisible(true);
          jdialog.setAlwaysOnTop(true); //<-- here's the trick..
          jdialog.setModal(true);
          jdialog.setVisible(true);
          jdialog.toFront();
}

Similar Messages

  • Raise appletwindow in front of all windows

    Hi,
    i'm running Forms10g in a separe frame, so the forms applet windows is a button in the windows task bar.
    In my form i'm receiving an event via dbms_pipe. at this moment i want to bring
    my forms appletwindow in the front / foreground of all windows (such as Outlook, Excel).
    In Forms6i i run winapi.
    How to do this in 10g?
    Please help!
    Robert

    import java.awt.Dimension;
    import javax.swing.*;
    public class JDialog_test {
         public static void main(String args[])
              JFrame jframe=new JFrame("JFrame");
              jframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              jframe.setVisible(true);
              jframe.setSize(new Dimension(200,300));
              JDialog jdialog=new JDialog(jframe,"JDialog",true);
              jdialog.setModal(true);
              jdialog.setSize(new Dimension(100,200));
              jframe.setVisible(true);
              jdialog.setAlwaysOnTop(true); //<-- here's the trick..
              jdialog.setModal(true);
              jdialog.setVisible(true);
              jdialog.toFront();
    }

  • POP NEW MESSAGE TO THE FRONT OF ALL WINDOWS: HOW?

    How do I set up iChat to bring a new message, current message, or any other message to the front of all other windows when received??
    The present options limit the actions to making a noise, bouncing the dock icon, and nothing else.
    I would like iChat to bring forward ALL messages received to the front of all other windows upon receipt, and put the focus on that newly received message.
    Is this possible? I have searched the interwebacles via the googlenator and have found nothing solving this issue. Be as technical as you like, I will understand any level of instructions.
    Thank you in advance.

    Try Chax It is an Add-on that adds the feature you request - or rather a chat window can be set to always be in front.
    This means new chats from the same Buddy tend to do the same.
    I have not tried it with chats from different Buddies.
    3:28 PM Thursday; August 23, 2007

  • Finder window keeps opening up and popping up in front of all windows

    Every minute or so a finder window opens and pops up in front of all open window - including the window I am working in (no matter which application). It does not even open to my regular finder - it opens to a sub folder that is on the sidebar as a shortcut. Might have started after security update that was not necessarily completed because after 6 hours I tried to cancel, then force quit, it wouldn't work, so I forced the computer to restart.

    Hi Basie & welcome to the forums!
    We should start with these...
    Have you done these two lately...
    Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
    http://docs.info.apple.com/article.html?artnum=302672
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751
    Reboot afterwards.

  • Dashboard - displaying a widget on top of all windows all the time

    Seems that I remember in previous versions of Dashboard, you could get it to show selected (or all) widgets all the time. Call it "on the desktop" or "on the top level" or whatever, but you didn't have to enter the expose-like environment to interact with a widget.
    Is there a way to do this or am I missing something or did they take this away in the later version(s) or ...??
    Widgets have been more of a novelty to me as I haven't really had a need for widgets until now. I have one widget that I'd like to have shown all the time on my second monitor as, well, as a dashboard display. But I need it there all the time.
    I also seem to remember using a 3rd party util that provided another way to do this, but all the ones I've just looked at and tried don't offer that desktop-level functionality.
    Thanks much in advance!!
    SA
    Dual 1GHz G4   Mac OS X (10.2.x)  

    I may have just answered my own question.
    Seems there's a wiki on it (you'll have to copy/paste this link):
    http://en.wikipedia.org/wiki/Dashboard_(software)
    It involves hitting (and holding down) the hot-key for Dashboard (F12 unless you've changed it in the sys prefs), dragging the widget you want and then releasing the hot-key. When released, you should still be dragging the widget and it should remain floating on the desktop.
    In addition, there's a command-line terminal hack for developers which will apparently make this permanent, although I haven't verified this yet:
    defaults write com.apple.dashboard devmode YES
    It seems to be working for me so far. Anyone care to verify this?
    Thanks again!
    SA

  • JFrame close all windows and send to front

    2 JFrame questions:
    1. Is there a way to keep JFrames above all other windows? For example, if a frame was on the screen and Internet Explorer opened, the frame would stay on top of the Internet Explorer window and would still be on the screen.
    2. is there a command to close all JFrames? I have a loop that creates a new frame each time it runs. How can I say close all Boxes when the exit choice is selected?
    if (x = 1)
    JFrame frame = new JFrame ();
    Box.getContentPane ().add (new JLabel (new ImageIcon (Toolkit.getDefaultToolkit ().getImage ("Image1.gif")))); Box.setUndecorated (true);
    Box.pack (); //prepares the image
    Box.setLocation (NextPlace, 0);
    NextPlace = NextPlace + 17;
    Box.setVisible (true);
    }

    I figured it out:
    System.exit (0);
    anyway thanks for your help.
    what about the other question?
    does anyone know if there is a send to front command
    so that the JFrame is above all the other windows?System.exit(0); will close the program. But if you just want to close windows this won't work.
    Instead you can use this:
    int iterator;
         Frame[] frame = JFrame.getFrames();
              for(iterator = 0; iterator < frame.length; iterator++){
                        frame[iterator].dispose();
    This will get all windows and close them.
    Also you must add this: import java.awt.Frame;

  • How can I automatically "retract" all windows from my Thunderbolt display back to my MacBook Air when I disconnect the display, esp if the Thunderbolt is the desktop with the white menu bar?

    I am in and out of my office with my MacBook Air.  I would like to set it up so when I plug in my Thunderbolt display in the office, the Thunderbolt display has my desktop, menu bar and the open windows.  If I set the Thunderbolt display to mirror by MacBook Air it adjusts to the lower resolution of the MacBook Air, which is a waste of a cool monitor.  I can set it up as an extended desktop and drag the white menu bar to the Thunderbolt display so it displays my desktop but if I then disconnect my MacBook Air, the menu bar is absent and all the windows that were seen on that display are absent, as if it I was still attached to the larger display.  The only way around this is to go to Thunderbolt display preferences, drag the white menu bar back to the smaller display and manually drag all windows to the smaller display before disconnecting.  Doing this multiple times per day is a real pain.  Is there a way to set my MacBook Air to recognize when it is attached to the Thunderbolt display and automatically my desktop and all open windows to it and then do the same process in reverse when I unhook it?

    It's definitely not supposed to work like that...when you plug the display in, it should just turn on and adjust your displays.  It works like that on my MBP.  Kind of a silly question, but do you have the MagSafe from the display plugged in your MBAir too?  Thats a requirement.  Beyond that, it should "just work."
    Not sure if there is some setting to enable...i haven't seen it.  Call to support?

  • Automatically move all windows to external primary display?

    I'm using an external display as the primary display (the one with the menu bar) of my MacBook when in the office.
    With Tiger, when I would plug in the external display, all of the windows on the MacBook's internal display would jump to the external display, i.e. remain on the primary display all the time.
    But now with Leopard they no longer move and I must tediously move sometimes dozens of them manually.
    Is there some hidden preference I can set to change this behavior back to the Tiger way? Or some hack to achieve the sma effect?
    Thanks!

    I get the opposite effect in Leopard on my iMac. When I turn off mirroring, all windows jump to the external screen, which is what I don't want to happen. If I then open an application, such e.g. Safari, it shows on the internal screen. But when I then switch mirroring on and then mirroring off again, recently open windows windows jump to external screen too. I would at least like to know whether this is by design or a bug.The builtin screen is my main screen (with menubar).
    Thanks/Mikael

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • Is there a way to make labview messages always appear on top of all windows?

    I have a main VI running and a user selects a non-Labview window to work on. Is there a way make the user prompt or user input express VI messages appear on top of all windows? I have experimented with the "make window always on top.vi" from the NI website. That brings the VI that is running to the top but not the prompt for the express VI message. I have also used the "make window always on top.vi" in a sub-VI and called that sub-VI to be always on top and it works. I was just wondering if there was a way to do it with the express VIs that NI already has written instead of making a custom message the way I have mentioned.
    Thanks,
    Troy

    If you only need to display a prompt and can get by with a limited set of canned buttons (OK, Cancel, Retry, Continue, etc.), you can try a VI that calls the Windows API MessageBox function. You can display a message box with user-defined title, text and buttons. There is an option to use the system modality which is what you want in this case. I use my own version of this all the time for that very reason.
    Message Box

  • "Shared Variable Control" combo box on Front Panel is empty after Build

    Hello;
    I have a project using shared variables and the DSC module. I am working on building a .exe application now that the project seems to run well.
    I have several places on the front panel where I have shared variable controls. These combo boxes allow the user to click the drop down button and browse the list of shared variables in the project, as well as "browse". When I run the VI from the project, the combo boxes fully populate with all of the deployed tags in the project (I have only one .lvlib in the project).
    When I build the project and run the executable, the only item in the combo box list is the "browse..." selection. I can click on that and browse to my variables, but it is much more time consuming to do so than to simply select the desired variable from the drop down list.
    So, how can I populate the list of shared variables from a particular library ino the Shared Variable Control combo box in a project build?
    A couple of things I have done to try to esolve th problem are ensure that the "Enable Enhanced DSC Run-Time Support" box is checked in the advanced tab of the build window, added the appropriate .lvlib file to the "Dynamic VI's and SUpport Files" window under the "Source Files" tab of the build window, and properly deployed the tag library programmatically in the project.
    Thanks,
    Michael Hampson
    Michael Hampson
    President
    XL Automation, Inc.

    Hi Michael,
    What you see in the development environment is to make it easier for developers, and as far as I know, there's no way to automatically populate the shared variable control during run time in an executable.  The reason being that the shared variable control would have no way to know which process it should be using to get the variables from.  The attached vi demostrate how you can acquire the list of shared variables in a process.  You can also set the default values of the shared variable control by right clicking it on the front pannel, go to Data Operations->Make Current Value Default.  I can do some more research on this, but I'm about 95% sure that there's no way to convert the array of shared variables to populate the shared variable control, as the shared variable control is a special type of xControl.
    Yi Y.
    Applications Engineer
    http://www.ni.com/support
    Message Edited by Yi Y on 07-02-2007 01:27 AM
    Attachments:
    SharedVariableList.vi ‏15 KB

  • English letters are displaying as boxes when telugu language is selected

    Hi All,
    I am working on an application for which we are providing the support for around 40 languages. I am having one issue when the application language is changed to telugu. When the user changes the application language to telugu, then the english letters in the application which are not localized (Left intentionally to be not localized) are displaying as boxes.
    In my application i set the file type description for the JFileChooser as "ఫ్లాష్ (*.swf)". The telugu letters are displaying correctly but english characters such as "swf" are displaying as boxes. I tested this application on Mac, Ubuntu, Windows XP, Windows 7 operating systems. In Windows 7 and Mac operating system the above issue is not reproducible but it is reproducible in Ubuntu and Windows XP operating systems.
    Please provide your valuable suggestions towards the solution for this problem.
    Thanks in advance.
    Udaya Shankara Gandhi.

    Hi All,
    Thank you for all your support in achieving the solution.
    Finally i got the solution for this problem with CODE2000.ttf font file. After i installed this font file in my fonts directory, english letters are displaying correclty. The reason for displaying english characters as boxes is the ttf files what i have used upto now (Gautami, Vemana2000, Pothana2000, Akshar) are not having support for English characters. But CODE2000.ttf file having the support to displying both english and telugu characters. After installing this font all the english letters are displaying correctly when language is changed to telugu.
    Fonts directories:
    c:/Windows/Fonts for Windows
    usr/share/fonts for ubuntu
    serach "font book" in Finder on Mac

  • Adobe Bridge 1.0.3 displays white boxs after 10.4.6 update

    After the update Bridge displays white boxes in the window. I have done all the standard stuff like delete prefs, rebuild caches, I even reinstalled it. I also ran the Adobe security update that was mentioned on another thread no luck. I have posted this problem at Adobe also. Anyone know of a fix?
    Patrick

    Turns out it was bad ram causing some of the trouble and trying to fix it only caused more of a mess.

  • Itunes 10: East Asian languages displayed as boxes in certain areas

    I just got a new computer, and moved all my music to my new computer, and installed Itunes 10. But for some reason, if I try to edit my song's info (Right click on song, 'Get Info') the titles and everything that's in another language displays as boxes. The song title itself when in Itunes displays properly, but only in the 'Get Info' box does all my Chinese, Japanese, and Korean song information turn into little boxes. It's not my computer's problem, as it displays all these languages properly. The problem lies with Itunes, but none of the help topics really do anything. Can anyone help me out please?
    If you didn't really understand my explanation, here are some pictures:
    [IMG]http://i53.tinypic.com/35n0i02.jpg[/IMG]
    [IMG]http://i55.tinypic.com/ojo1i0.jpg[/IMG]
    As you can see, boxes in the info editing areas, but everywhere else, it displays properly.
    Thank you for your help!

    In case anyone else comes across this problem -
    It turns out that the fontconfig.properties approach is a bit of a red herring (at least in this example).
    I've resolved the issue by adding a method to my bean to specify a different font for english and chinese language users. For chinese language users I specify Font = "Simsun-18030" and for each AWT component explicitly setFont( new Font( "Simsun-18030", Font.PLAIN, 14 ) ) Now AWT components displaying chinese characters are rendered correctly with no need to modify any config files on the client PC.
    - NB font appears smaller for pointsize than english fonts.
    - Using "SimSun" as the font also works but text in english is not displayed very clearly
    - On windows you must install east asian language support for this to work (Start -Run - intl.cpl - languages tab)

  • Simplified Chinese displayed as boxes with numbers

    Firefox used to be able to display Simplified and Traditional Chinese character pages perfectly when it's set at "Auto detect- Chinese". However, ever since I updated to 4.0b7, Simplified Chinese characters have all started to be displayed as boxes with little numbers in them.
    Despite trying different encodings, such as GBK and GB18030, nothing is able to properly display Chinese simplified characters. I have IE as well, and it is able to display both S and T Chinese pages without a problem like Firefox before 4.0b7. I'm using English version of FF with 64bit Windows 7.

    The boxes with little numbers mean that Firefox is now unable to find a font which supports the characters in question. (It's nothing to do with the character set detection.) This could either be because the fonts have been removed from your computer (unlikely, if IE can find them), or perhaps because the website has changed to ask for fonts you don't actually have, or perhaps it's serving different pages to different versions of Firefox. Were you on 4.0b6 before, or 3.6.x?
    Gerv

Maybe you are looking for

  • Expansion Card

    I received a new Zire 31 as a gift recently and realized my expansion card from my old Tungsten E, although it fits in the slot, does not work.  How can I listen to my songs again?  Thanks for your advice.

  • Policy issues win xp sp2 and zfd ir6

    Hi, I have been having this issue for about 4 days. In our school environment we push a very restrictive policy out to the desktop, and also apply printers during the login process. About Tuesday afternoon, I noticed that some labs were not receiving

  • Spotify 3.5.0 crash on startup iPhone 4s

    Hey. After installing the latest update (3.5.0) the spotify app crashes the moment I want to start it on my iphone 4s with ios 8.4. The screen goes blank and the phone reboots. Not really satisfying. Does anyone else experience this? Is this problem

  • How to display image in layout

    Hi gurus My requirement is i am uploading image file . i want to dispaly the image . Can anyone suggest me how to do that . Thanks & regards kalyan.

  • How to disable programmatically created Submit Button in ProcessFormRequest

    Hi All, I'm working on an issue where i have created an Upload button Programmatically. The upload button should get disabled after it is clicked. The code for the upload button creation is as below. This has been added in the processRequest of CO. O