Displaying JobTicket colorant data in Output Preview dialog.
Hi,
my task is to create plug-in which extends functionality of Output Preview dialog. It should display actual state of all Separations and Inks specified in PDF JobTicket.
I supposed to use AVPageViewSetVisibleInks/AVPageViewGetVisibleInk but they do something different that I need.
Are there any ways to set/change Separations and Inks in Output Preview dialog via Adobe SDK?
Thanks!
You can't update or extend existing dialogs. You'd have to provide a
complete new function.
Aandi Inston
Similar Messages
-
Ere is the output preview dialog?
I was wanting to check for ink coverage, but the help page says go to output preview dialog. adobe help pages are a challenge because they tell you to go to places and don't tell you where they are.
What version of Acrobat Pro?
-
Output Preview dialog box overview
This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7ba3.w.h tml
One reason for not including profiles is that you don't want the profile-to-profile conversion that takes place, which will typically change black to rich black and other things. For some applications colour fidelity is less important than colorant fidelity. But of course, mostly its people who don't have a clue about colour.
Or, just an incompatible view of the workflow. Some people are using rather old fashioned colour workflows where output intents are ignored. If you have one of these workflows, then a good colour managed file following best practice appears to have only device dependent colours.
HOWEVER, I've never seen "Unknown output condition" in the Simulation profile selection. This is supposed to be a profile of your choice - but perhaps this file is a PDF/X file with an unrecognised output condition. Anyway, I certainly don't see it as a suggestion that the file doesn't have profiles. Well worth looking further into these files. Have you preflighted them? Are they PDF/X and if so what sort of PDF/X? -
I just upgraded to Acrobat X Pro and I'm running it on Max OS X 10.5.8. When I click on the check boxes of the color separations in the "output preview" it doesn't do anything. Instead I have to hold down the mouse button for a extened period of time, let go and then it will work. I do prepress work and I use the color separations in "output preview" to make sure blacks are truly going to be black. I go through a number of pages in a day and having to hold down the mouse button, instead of just clicking the checkbox can be time consuming. I have never had this issue with Acrobat 9 or any previous versions. Any suggestions would be appreciated. Thanks
I found a thread similar to my issue, but the suggestion was to increase the double click speed in the preferences, this did not help.I also have to make sure gray images are real gray not cmyk gray. Is there a preflight for that?
Date: Thu, 15 Dec 2011 02:07:09 -0700
From: [email protected]
To: [email protected]
Subject: Acrobat X Pro Output Preview
Re: Acrobat X Pro Output Preview
created by JR_Boulay in Acrobat Macintosh - View the full discussion
In the PReflight tool there is a checkup that can automaticaly control black texts, this is less time consuming than doing it manually…;-)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4086238#4086238
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4086238#4086238. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Macintosh by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
In our softproofing setup, we have our press profile set up as the default CMYK profile in Acrobat 9. However, when we open the Output Preview window with the same profile set under Simulation Profile, the appearance of the color changes (some colors more so than others). I'm probably missing something simple, but I would think that the appearance should stay the same unless you change the Simulation Profile to a different profile.
I look forward to reading about what a doofus I am...Please explain in more detail. A screen shot might help. Also version of Acrobat.
-
The process for adding features by selecting "Add features to Windows 10 Technical Preview" from control panel fails with error "Cannot add features. Your previous edition of Windows has been restored, but you should contact Microsoft support."
This occurs after entering the key and the system attempts to reboot and apply updates. During the reboot, the updates begin to apply, fail after a certain percent, then roll back. After rollback and logging in again the above mentioned error message is displayed
in the "Add features to Windows 10 Technical Preview" dialog. Build 9926. Any tips on how to fix this?On Sun, 8 Feb 2015 11:40:59 +0000, ZigZag3143x [MVP] wrote:
Understood. I attempted the same thing and it was successful.
I've also done this with no problems.
Paul Adare - FIM CM MVP -
How to display 16 weeks data in the output of the query
Hi experts,
I have to display 16 weeks data from current week(Thursday to wednesday).
(19/07/07 - 12/07/07) (11/07/07 - 6/07/07) like these 16 weeks
sales sales
product1 200 300
product2 400 500
I have to use text variable on createddate char but I do not know how to implement
the above scenerio.
Guru's please help me.
Thanks & Regards,
James.sure james ..
chk these links..
text var..
http://help.sap.com/saphelp_nw04s/helpdata/en/85/e0c73cccbdd45be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c1/759b3c4d4d8d15e10000000a114084/frameset.htm
chk thisthread too..
Re: Problem with the text variable
and for replacement paths..
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
hope it helps... -
Invoice printing output preview is not displaying anymore.
Hello
The user have invoices where you cannot click the issue output preview. Before the 9th of january everything was fine, he said all he did was transport 2 things.
1. made the field of payment term mandatory instead of it being optional.
2. Added new payment terms, about 5 or 6 new ones.
He says on the 10th of january he started seeing this problem. Also, the accounting document is not being created for those invoices after the 9th of january. Before 9th , there were no problems.
Any ideas or solutions.
Thanks in advanceHi
Use Tcode VFX3 and try to release the documents and advise the error as to why the the accounting documents are not being generated
Anurag -
Acrobat 9 + Output Preview
In Acrobat 9 I noticed something confusing. I had a pdf file which had black text on a background. I opened this up in Acrobat 9 and went to check to see if the black text was set to overprint. Going to Output Preview I turned off the Process Black separation and it showed me that the black appeared to be overprinting. I then turned off the Simulate Overprint check box and the background showed the text to be knocking out. Under the Color Warnings preview I used it to show me all the overprinting elements and it verified that the Black Text was overprinting. I assumed that Simulate Overprinting would show me what the picture would look like if the black text was not set to overprint. Instead it's deceiving me making me think that the black text is knocking out when I turn this off.
In Acrobat 8 the previews appeared correctly or what I assumed in my mind as correct. Is this feature working correctly in Acrobat 9 and if it is can you explain the thought process behind what is happening?In Acrobat 9, you might have noticed that overprint preview has been removed from the menu items under Advanced > Print Production. The "Simulate Overprinting" checkbox was added to output preview so that we can still temporarily "turn on/off" the simulation of overprinting appearance (rather than have to change preferences), largely for troubleshooting or further examination of a document. Turning this off is like turning off overprint preview (which simulates overprinting appearance). It's not actually turning off the overprint flag itself, so color warning is still highlighting the black text.
Output Preview always enables overprint preview regardless of what your preferences are (in earlier versions, this includes your menu selection). You were unable to turn off overprint preview whenever output preview was open. In 9, the checkbox allows you to turn off that simulation.
Overprint Preview can still be controlled in display preferences.
I hope this helped. If not, please give more info about what you are expecting to see. -
Acrobat Pro 11 - Output Preview not working
This issue came up again on my Macpro. Although it's ok on my MBP. When try to analyze a PDF in "Output Preview" a few things aren't working for me. The "Total Area Coverage" warning will not display on screen. Also when I hover the cursur over the PDF I am no longer see percentages under the ink color Preview > Separations. Does anyone know of a quick fix so I don't have to keep going back to an oldere version of Acrobat?
Thanks for your help.I think I'd uninstall Acrobat (there should be an Uninstaller in your Acrobat folder inside the Applications folder). Then reinstall the application.
-
Output Preview does not show right values of Spots
I have a document created in InDesign. It contains only 1 spot color (no CMYK). Acrobat shows worng spot values in Output Preview (100% for 100% spot, but 4% for 10% spot. Pitstop shows the right value. Can you tell me what is the problem?
Hi Lisa,
First you know for which transaction you want to print the form. For example if it Purchase Order then Transaction is ME22n or ME23n .
The error you are getting might be because of one of the following reason.
1) The output you are using should be configured for particular order number .For example if You want to print the form for a PO number 40000020 For this you must have configured output type in the messages of that order number.
Go to ME22n give the order number and press enter . In the application tool you can find messages button just click on that and it wil take you to other screen where you can give putput type print medium and printer in Comunication method and in firther data give start immediately
2)Let us suppose it was configured then the output must have configured properly.
Thanks,
Nageswar -
Hi SRM-Experts,
System: SRM 550
Scenario: ECS
We receive the following popup-message while using the PO output preview functionality in SRM (TX BBP_POC): "Global data missing for purchase order".
I found out that the error occurs during determination of company address of the purchase group. The error is raising in FM "BBP_OUTPUT_COMPANY_FROM_EKGR". The FM is looking for the user attribute (PPOMA) "COMPANY", but for the Purchase Group is no company flag maintained (TAB: Function in PPOMA).
Has anybody an idea how I can fix this issue?
Thank you very much in advance
Best regards
AxelHi
Try these SAP OSS Notes ->
Note 560591 EBP 3.0-3.5: Company is not determined with PO output
Note 525692 3.0: Output of contracts
Note 846738 Methods: Sporadic termination with various documents
Note 908184 Incorrect numbering with filter
Note 861815 Prices in historical versions are missing
Note 785616 Displaying history at item level of a purchase order
Note 761516 Release note SRM Server 5.0 SP03
Note 703876 Release note SRM Server 5.0 SP00
Note 792177 Purchase order changes not in back end purchase order
Note 655737 Support Package 03 for SRM 3.0
Note 484325 Missing plant and storage location in ext. classic scenario
Note 485552 Missing tax code in purchase order with direct material
Do let me know.
Regards
- Atul -
PDF Output Preview Inconsistent
I have created a document in Framemaker and printed it out to a PDF. When I check the PDF Output Preview to see if there is any color by turning off Process Black, I find an image that shows up as gray. If I then scroll to the bottom of my PDF and then come back to this image, it no longer shows up. I've had another person in the office check the file and the same thing happens. The image in question was created in Illustrator before being imported into Framemaker. All the colors were set to black.
Is this a bug in how the PDF is displaying the Output Preview? Or is there an issue with the image?I ordered a book a couple of weeks ago with the advice of AppleCare people responsible for printed product, that the PDF which is seen in the purchase process is what the final output would look like.
However, and to my disappointment, it was not the case. Indeed, the PDF was cropped on the edges. The AppleCare people ordered a reprint to see if any change would appear, but unfortunately it was not the case.
Now the matter is within AppleCare quality control's jurisdiction and I do not know yet what will be their conclusion. I'll keep you posted if you are interested. -
Displaying selection screen as pop-up from dialog box
Hi,
I have a screen which is of dialog-box type. This dialog screen shows an ALV and has a button in the ALV toolbar. On pressing this button, a pop-up screen is to be displayed. This pop-up screen is designed as a selection-screen. Is it possible to display this selection screen as a pop-up from a dialog box screen?
Regards,
SuhasHi Suhas,
Its possible to display selection screen as pop-up from dialog box.....Check the code below...copy paste and execute...
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE text-001.
PARAMETER p.
SELECTION-SCREEN END OF SCREEN 123.
CALL SELECTION-SCREEN 123 STARTING AT 20 5
ENDING AT 80 15.
The below code might help u to add a button in alvgrid's toolbar......
* CLASS lcl_event_handler DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
DATA: wa_toolbar TYPE stb_button,
calc TYPE REF TO cl_gui_frontend_services.
METHODS : toolbar_handle FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object
e_interactive,
ucomm_handle FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS. "lcl_event_handler DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD toolbar_handle.
MOVE 3 TO wa_toolbar-butn_type.
APPEND wa_toolbar TO e_object->mt_toolbar.
MOVE : 0 TO wa_toolbar-butn_type,
'CALC' TO wa_toolbar-function,
'@0M@' TO wa_toolbar-icon,
'Calculator' TO wa_toolbar-quickinfo.
APPEND wa_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "toolbar_handle
METHOD ucomm_handle.
IF e_ucomm = 'CALC'. " When button added in toolbar is clicked
IF calc IS INITIAL.
CREATE OBJECT calc.
ENDIF.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = 'CALC'.
ENDIF.
ENDMETHOD. "ucomm_handle
ENDCLASS. "lcl_event_handler IMPLEMENTATION
DATA : container TYPE REF TO cl_gui_custom_container,
grid TYPE REF TO cl_gui_alv_grid,
event TYPE REF TO lcl_event_handler,
it_display TYPE TABLE OF mara,
wa_display TYPE mara.
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM build_it_display.
PERFORM create_objects.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN 'EXIT'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN 'CANC'.
SET SCREEN 0.
LEAVE SCREEN.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form build_it_display
* text
* --> p1 text
* <-- p2 text
FORM build_it_display .
SELECT * FROM mara UP TO 15 ROWS INTO TABLE it_display.
ENDFORM. " build_it_display
*& Form create_objects
* text
* --> p1 text
* <-- p2 text
FORM create_objects .
IF container IS INITIAL.
CREATE OBJECT container
EXPORTING
container_name = 'CUSTOM'.
CREATE OBJECT event.
CREATE OBJECT grid
EXPORTING
i_parent = container.
SET HANDLER event->toolbar_handle FOR grid.
SET HANDLER event->ucomm_handle FOR grid.
CALL METHOD grid->set_table_for_first_display
EXPORTING
i_structure_name = 'MARA'
CHANGING
it_outtab = it_display.
ENDIF.
ENDFORM. " create_objects
Cheers,
Jose. -
Acrobat DC and XI different Output preview; same setting on the same machine
Hello,
I've got an question regarding Output preview
My sample PDF does have different output preview values on Acrobat DC (100% Black) and Acrobat XI (CMYK values)
Both use the same setting (Euroscale Coated v2), doc has no PDF/X output intent
Still..... it's strange that on one Mac the PDF does look different....
What's going wrong?
Kind regardsNumerous fixes went into color display on MacOS for Acrobat DC as well as in Output Preview in general. That having been said, I don't recall any changes that would have resulted in the phenomena you are seeing.
I assume you were clicking on the “black” circle to get you sample color values? And what do you believe should be the correct values? CMYK=(0,0,0,1) or CMYK=(0.8,0.64,0.67,0.75)?
If you can post a copy of this file, we can examine it to see what is going on.
- Dov
Maybe you are looking for
-
I got all the open items of FBL3N transaction , once the lsit is generated we need to pass transfer posting with clearing using F-04. is any bapi available for this. I have checked this 2 bapis, BAPI_ACC_DOCUMENT_POST BAPI_ACC_GL_POSTING_POST Thank
-
Hi, I am having a challenge trying to get several SWFs to load XML directed content from a separate directory than the HTML container the files are placed in. The SWFs, the XML, and the content are all in their own directory. Each SWF has it's own di
-
We have a form that users input biliography information (name of book, pages, date published, etc) into a text area. they can input multiple articles at once in the text area. is there a way to intoduce a line break on the pdf in between each article
-
Since the upgrade to 20 the short cuts (command +V or C or A or W or what ever) does not work anymore. I want the old version back. Short cuts are time saving. Where do i find the old version until this is fixed? BTW: since the upgrade, in the mornin
-
Error in BP for External Procurement
Hi together, I've set up the BP for External Procurement 60.2 as described in the manual. From all pages only the iViews "Overview-Purchasing" and the iView Vendor Confirmations on the Overview works without error. The other iViews wouldn't displayed