Displaying labels for Minor Ticks?

Hi!
I am using MSVC++ 6 with MeasurementStudio6. I want to have the minor ticks have labels in logarithmic scaling when no major tick values are shown. Is this possible with version6 or only in the .NET version.
Thanks,
Miklos

Miklos,
There is no built in way to add labels to the minor ticks in VC++ or .NET controls. However there are "Value Pairs" in VC++ and "Custom Divisions" in .NET. This basically allows you to add a label to axis at a specified value. You can have a collection of these to form a more detailed scaling for each zoom situation. You could for example check the range that is being viewed, calculate the values where it would make the most sense to have the labels and add the value pairs programmatically.
I suggest that you file a suggestion at http://www.ni.com/contact (go to product feedback) that way our engineering department will be notified.
I hope this helps you get started.
Regards,
Juan Carlos
N.I.

Similar Messages

How to display labels for the list populated in F4's ?

Hi,
I am working on ADOBE interactive form where in a remote F4 help is used.
When i click on F4 help, the list is shown in a pop up window, but the problem here is the labels are missing.
Eg:- The list is displaying COST CENTERS and DESCRIPTIONS, but there is no heading to differentiate between the two.
Do i have to code for displaying the labels as well ?
If yes, could you please provide the steps ...
Thanks
Kumar

Hi Sachin,
I am using a remote function call to a function module which exists in another system. The values for the F4 are getting
filled, but as i said earlier, the title and content header are missing.
I am using an entity type "UOM" which has a data element and i checked that the field labels are maintained for it.
What am i supposed to do in this situation ?
Thank you,
Raja

Is it possible to display a TickLabel on minor tick marks?

I am trying to figure out whether it is possible to display a label on minor tick marks in a LineChart. I can't immediately gleam from the NumberAxis > ValueAxis > Axis javadoc how / if this could be possible to do. Tried experimenting a bit with making my own custom Axis class seeing if anything would pop when I started overriding methods, but no, not really.
The issue I'm trying to solve is having the minor tick marks labeled on the chart when it is zoomed in. Currently, if I zoom in on a region contained between two major tick marks, there will be no axis labels at all (except the bottom left corner), which is unacceptable. I need to be able to label those minor ticks at some level of zoom to make the chart more readable.
If anybody have any ideas on how to proceed with this problem, greatly appreciated.

Bump. Is there any resolution for this issue?

Label for htmldb_item.checkbox

Is there a way to put a display label for checkboxes rendered with htmldb_item.checkbox?
I know it doesnt make much sense to put a label on every row next to each checkbox on a report region, but just wanted to know if it was possible.
Thanks

Thanks, that works!
I just tested this out on the hosted site (24317:4)
What does the
onMouseOver="row_mouse_over1517788416209474431(this, 1)"
stuff in the table do? I am pretty sure I dont get that on my site. Is it related to the theme/template? it doesnt seem to do anything
Thanks

Can't get field labels to display above for multiple fields in one cell

I've tried searching for how to fix this to no avail. I'm new to Apex and I'm trying to get 5 fields on one line with labels above each: salutation, first name, middle initial, last name and title. I've set New Line and New Field to No for all but the first item. With the labels for each field set to Right, everything displays on one line. With the labels set to Above, fields are displayed on separate lines and I'm not sure why. There are other fields on the form as well but they are each on their own line. Any help would be greatly appreciated. My Apex version is 4.1.1.00.23. I'm running the standalone Apex Listener (current version from 7/12) with a 10g database.
Thanks

Hi,
have you tried to set New Field to Yes? If that doesn't work, a test case on apex.oracle.com would be great. That's the easiest way to show you how it works.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Display a label for every other category on a graph

I have a line graph created in Illustrator with years on the horizontal axis (1998, 1999, 2000, 2001, 2002, etc.). There is data for each year that will be plotted on the line, however I would only like to display every other year (1998, 2000, 2002, 2004, 2006, etc.). Is there a way to show every other year on the horizontal axis.

I can't leave the years out because there is data for those years. In Excel, there is an option to 1 display a label for every category, 2 to display a label for every other category, 3 to display a label for every third category. How do you do it in Illustrator. My table looks something like this but begins in 1980.
"2001"
52
"2002"
56
"2003"
81
"2004"
84
"2005"
91
"2006"
97
"2007"
102
"2008"
103
"2009"
104
"2010"
110
"2011"
106

Web Chart - Display Minor Ticks, but not minor gridlines - BW3.5

We have recently upgraded to BW 3.5, and I am still trying to find my way around the web chart designer
I want to have major and minor tick marks shown on the vertical axis, but only gridlines on the major tick marks.
Can anyone tell me where to find these settings?
I have managed to turn the minor tick marks off, which removes the gridlines and the tick marks, but I still want the minor tick marks to be visible (As I was able to do in the previous version)
Thanks in advance for any assistance!

I think I have found out how to do this.
You set the colour to none. Simple, and yet inconsistent with other areas of the chart designer.

Obtaining grid lines for every tick mark in a chart

I would like to create a chart that contains gridlines for each tick mark. Furthermore, I'd like to keep the notion of major tick marks being longer and being the only labeled tick marks. It seems that the XYChart is only placing gridlines for major tick marks. Pouring over the API doc, I cannot find a way to make it draw gridlines for the minor tick marks.
Is this possible out of the box?
If not, what is the correct solution? A subclass of ValueAxis?
Thanks,
Karl

Paru told me that it is not possible and to file a bug.
http://javafx-jira.kenai.com/browse/RT-17285
Karl

Different labels for a textview based on component usage

Hi,
We are on SAP E-Recruiting EHP5 and we have a requirement wherein the label of a textview in a view needs to be dynamicaly controlled. The candidates personal data page (view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI) gets displayed both:
1) When the candidate is signing up on the portal to create his profile
2) On the application page while the candidate is applying against a particular position
Now case 1 is a straightforward one. I set the label to a OTR and it just works fine. Case 2 is where the problem occurs. When the candidate applies against a particular position the standard SAP roadmap comes up with the view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI as its 1st step. So now how can I set a different label for the textview in this particular case coz the navigation happens dynamically through prepare_dynamic_navigation( ). Appreciate your inputs on this one.
Regards,
Uday
Edited by: Uday Mr on Feb 29, 2012 3:36 PM

Hi Uday,
Please try to create it dynamically.
Example:
METHOD wddomodifyview.
*-Data declaration
DATA: root TYPE REF TO cl_wd_uielement_container,
page_header TYPE REF TO cl_wd_page_header.
*-Get reference to Root UI Element Container
root ?= view->get_element('ROOTUIELEMENTCONTAINER').
*-Creating page header
page_header = cl_wd_page_header=>new_page_header( title = 'Page Header' ).
cl_wd_flow_data=>new_flow_data( element = page_header ).
*-Add new page header to ROOT Element Container
root->add_child( page_header ).
ENDMETHOD.

Dynamically Changing Labels for Multi Row Block Buttons

Forms [32 Bit] Version 9.0.4.1.0 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
On my local: Windows 7 OS
I am having a difficult time in doing the following in forms, and not sure if it can be done?
I have a multi row block,based on DB table, which displays filename and another column from the table.
It also has a push button on each row, which opens and displays the physical file from its source, when clicked. The filename thus can have 3 diff statuses depending on its sources and accordingly corresponding button should display appropriate label:
a) View Image (its is in content server and successfully imaged. In this case I display the file in the browser, from the content server, when the button is clicked)
b) View File (Display the file from file system)
c) View Error (Display imaging error message from the table, as file failed to make it to the imaging server)
I have this logic currently coded in the post query trigger, at the block level, and tried using set_item_property(button_id, label, <button_lable>), where I programmatically set the button lable, based on the file status (imaged, not imaged or has error) in that row. This wroks well, only if all the files in the multi row block have the same status. If each of them have diff statuses, then only last processed files's status gets reflected into the button label. For eg: The file in the first row of the block is imaged, and one in the second row has an imaging error. The button label for the first row should say 'View Image' and button for the second row should say 'View Error'. But now buttons for both the rows display 'View Error', as thats what got processed last!
I __can not use set_item_instance property for 'label'__ (which lets us dynamically change the label on the push buttons).
Is there any way to do this for ORacle forms? I am now playing with having 3 diff button items in that block, laying them on top of each other and showing only those that are appropriate and hiding the others... But I am not sure it is going to give me what I need? I think I am going to end up facing the same issues as in above case!!
Any expert advice is highly appreciated.
Thanks in advance for your time:
Libran_Girl
Edited by: libran on Aug 30, 2011 8:04 AM
Edited by: libran on Aug 30, 2011 8:05 AM

<p>I have just updated this existing PJC, that was originally constructed to handle Text Fields. You can, now, also handle buttons with it.
Set the Button's Implementation Class property to : oracle.forms.fd.MultiButton.
</p>
This is the code you have to put one triggers of your based block:
When-New-Record-Instance trigger: (based on the EMP table)
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;When-Create-Record trigger:
declare
     LN$N    pls_integer ;
     LN$Rec pls_integer := :system.cursor_record ;
     LC$C    Varchar2(15) ;
Begin
     if get_block_property('EMP',TOP_RECORD) > 1 Then
          LN$n := :system.cursor_record - get_block_property('EMP',TOP_RECORD) + 1 ;
     else
          LN$N := :system.cursor_record ;
     end if;
     If LN$N > 0 Then
          Set_Custom_Property('EMP.BT', LN$n, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$n, 'SET_NEW_REC', to_char(LN$Rec) );
     End if ;
end;Post-Query trigger:
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;Don't forget to copy the multirecord.jar file in your /forms/java folder, then add it to the archive and archive_jini tags of your /forms/server/formsweb.cfg file.
Enjoy it,
Francois

Reminders are not appearing in Mail - and its the only way to set labels for flags.

Every place I look for information about how to set the labels for flags in Mountain Lion Mail shows that they're editable once you click "show" next to "REMINDERS" in the sidebar. However, my sidebar has no "REMINDERS" heading, and there seems to be no preference or option anywhere related to this. I upgraded from Snow Leopard today; I had reminders showing (as "To Do's"). I really really want to change the labels on the flags because they're useless otherwise.
Am I the only one with this problem?

Flags and reminders are no longer coupled in Mountain Lion. So I'll try to explain how to see your flagged messages.
You can see a sidebar in Mail that looks like this. Yours may not display the "Flagged" row yet. I'll explain that in a minute, If you don't see this sidebar, make it visible by clicking that arrow on top that would say "Show" if the sidebar were invisible (it says "Hide" here):
You can flag a message by clicking the "Flag Selected Message" in your favorites bar, which should appear just above the screenshot. Once you have at least one flagged message, the "Flagged" row shown above will appear.
I hope this helps.

Can't Change Labels for Properties

I Can't Change Labels for predefine Properties
or Custom Properties.
I had done it with this:
http://help.sap.com/saphelp_erp2004/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
I just followed what the help said.
but i can't see any change for my label of Properties.
I had done it as follow steps.Please help me to
Check if i miss some steps!
1,I creat .properties files
mylabels.properties
   in this properties file i creat a key
       modified=date
mylabels_zh_CN.properties
    in this properties file i creat a key
       modified=u66F4u65B0u65E5u671F
2,I made a jar file use the two .properties files
named mybunding.jar
3,I copy this jar file to
.../j2ee/cluster/server<n>/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.km.common.resourcebundle/lib
4, Create a new metadata extension under Content Management -> Global Services -> Property Metadata -> Metadata Extensions.
named it my_metadatae_extension
   set Bundle File=com.sap.km.common.resourcebundle.mybunding.mylabels
5,restart the servlet engine,
6 in the key for label of the properties
    i set modified the key i creat in step 1.
when i display the properties it still didn,t display
my created lable.
How should i do? any step i miss? or any better solution
for the lable?
Please help me ,
BestRegards
Han

Hi Han,
here my corrections:
1.
I would use the filename "mylabels_cn.properties" and not "mylabels_zh_CN.properties"
2.&3.
This is the SP2 way for using the bundle files for properties. For NetWeaver you need to create a new PAR-file with the bundle file including the labels and translations as described <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm">here</a>.
It's very easy if you use the example PAR file provided by SAP in SAP Note 817876, as mentioned in the referenced link (Prerequisites section).
Read carefully the process in the link and try again. If you still experience problems, come back with the new detailed description.
Hope this helps,
Robert

Display variant for transaction FBL3N - can it be protected?

Hi,
I have made a display variant for transaction FBL3N (G/L account line item display).
Can I protect this variant?
I don't like other users to overwrite it.
Thank you.
Kind regards,
Linda

Hi Linda,
Line layout variants depend on a few things.
1 authorizations.
you need to make sure general users cannot change the standard layout. This is done via settings, layout, administration.
2. Personal variants, you can create your own variant and set it up just for yourself.
This can be done by selecting the user specifc tick box. The naming will have to be different but a user wont be able to see or change your variant.
3. Lastly you can set your variant in FB00, however all this does is assign a variant to a user, someone with either the correct authorization or a variant that is not a user specific one COULD be changed.
Hope this helps.
Please award points if useful.

No line item display possible for account

Hi Guys
No line item display possible for account in FBL3n T code

Hi
Go to FS10N and check whether account balance. If there is balance on the account you need to Journal entry to make balance zero. Go to FS00 and tick line item display option. You can not select line item display option untill the balance is zero.
Hope this will help

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

Displaying labels for Minor Ticks?

Similar Messages

Maybe you are looking for