Obtaining grid lines for every tick mark in a chart

I would like to create a chart that contains gridlines for each tick mark. Furthermore, I'd like to keep the notion of major tick marks being longer and being the only labeled tick marks. It seems that the XYChart is only placing gridlines for major tick marks. Pouring over the API doc, I cannot find a way to make it draw gridlines for the minor tick marks.
Is this possible out of the box?
If not, what is the correct solution? A subclass of ValueAxis?
Thanks,
Karl

Paru told me that it is not possible and to file a bug.
http://javafx-jira.kenai.com/browse/RT-17285
Karl

Similar Messages

Line Chart does not display grid lines for x-axis (apex 2.0 / 3.0)

Hello,
is there an option to display x-axis grid lines?
I set up an SVG chart (Line) but only IE displays y-axis grid-lines. I set the "Show Grid Line" - value to "enable"
Does any body has an idea how I told apex to display x-axis grid lines also.
Btw: only MS Internet Explorer displays the grid lines, I use firefos 1.5.0.10 -> no grid lines are displayed.
The table how I create the chart are as follows
select null link, label, value
from
SELECT 1 Value , 1 label FROM dual
UNION
SELECT 3 Value , 2 label FROM dual
UNION
SELECT 5 Value , 3 label FROM dual
UNION
SELECT 2 Value , 4 label FROM dual
Thank you for helping me !!
Message was edited by:
athor

I changed this and put usage of UTL_FILE into a dynamic PL/SQL. The package will
compile and work unless you want to create debug information. If yes, then it will raise an
error message. So, you don't need UTL_FILE execution priviledge from your DBA.
I opened the package and you may modify it the way that you don't need any public
synonyms and no UTL_FILE to run it.
There are so many questions in this forum related to "What is my DBA going to say?" or
"How is he going to react?". Even for some minor issues. I have myself also seen some
of similar situations and the only thing I can sey is:
You got to use that powerfull tool Oracle Database instead of hiding it away from your
users and developers. Learn how to control it instead of prohibiting access to it! Otherwise,
it's just a waste of money.
Denes Kubicek

MS Word 2007 table lines have interesction tick marks

Hello,
MS Word 2007 SP2
Adobe Acrobat 9.0.0 Plus
A table created in Word, where row lines are shown but not column lines, shows on some lines tick-marks where row and colums would intersect. In AA version 7 this was not an issue, however, when converting from within Word this too was an issue.
The image below didn't turn out as clear here than the original, but you still can see the Word bit left and AA on the right with the tick-marks.
How can it be avoided?
Thank you
Stefan

I'm experiencing this myself. I found instructions to navigate to Edit > Preferences > Page Display. Then, uncheck 'Enhance Thin Lines'. This lightens the lines considerably; reducing the very dark, chunky lines. However, table lines are still not the same width/thickness regardless of the zoom level in Acrobat (50% - 800%). And there is no pattern to where thicker lines appear; header rows, odd rows, etc. A random mess. I'm 100% positive the lines are set properly in Word 2007. And interestingly, all tables lines display equal widths consistently in printed copy- when printing from the PDF. The issue seems to be Adobe's electronic page display and that the 'solution' I found does not work. I have the latest version of Acrobat Pro and a colleague has the latest version of the Reader without a writer license-- no conflict of versions or software suite.
I deliver documentation to customers electronically. My documents have many tables. My deliverables to look unprofessional and unpolished. My deadlines haven't been met due to research and this unresolved issue. Difficult to accept.
So frustrated! Please help!
Jennifer

Grid Lines for each cell

In EXCEL it was easy to add gridlines (borders around each cell). Is there an easy way to add grid line in Numbers so they will print in the final document?

The *Numbers User Guide* is full of useful infos.
Just an example :
We may also do that with *Inspector > Table* .
Yvan KOENIG (VALLAURIS, France) jeudi 10 décembre 2009 19:32:59

How to run a command line for every folder in a share

I'm trying to use Robocopy to merge two user home directories shares from two different servers to a new server, but the only problem is that I can't use the /purge to mirror deletes because it will delete the other servers stuff (since one server's stuff
doesn't exist on the other one currently).
But I'm thinking if someone I could enumerate the folder names from the users$ share on each server, and add it to both path statements in the commands below, i could add purge since then it would be running individually per user folder, rather than at the
user level below.
robocopy "\\CurrentServer1\users$" "F:\Users" /E /B /COPY:DATSOU /R:1 /W:1 /MT /LOG:"C:\RobocopyLogs\MirrorUsers1.txt"
robocopy "\\CurrentServer2\users$" "F:\Users" /E /B /COPY:DATSOU /R:1 /W:1 /MT /LOG:"C:\RobocopyLogs\MirrorUsers2.txt
What I'm hoping is that there's some scripting genius out there who could tell me how to use a batch or vbscript to save a LOT of time. If not, I'm doing this all by hand for hundreds of users :(
Thanks in advance for any help you can provide.

Mike and Bill are right on with your approach however, to show you why your code is not working I removed all "Smart Quotes" in favor of the following.
Refrain from commenting every line. It makes the script impossible to follow.
$hostname='hostname'
$migrationdata='c:\migrate\IPDATA.txt'
$ip=Select-String -Path C:\migrate\IPDATA.txt -Pattern $hostname
$ip = $ip.Substring(35)
$ip = $ip.Trim()
$dns='10.10.1.10','10.10.1.11'
$gateway='10.10.4.1'
$netmask='255.255.252.0'
$dnsdomain='new.domain.local'
$msg='We will be using the following information for the new IP stack Hostname:{0}, IP address {1} Default Gateway: {2} DNS Servers: {4} DNS Suffix: {5}'
Write-Output ($msg -f $hostname,$Ip,$Gateway,$DNS,$DNSdomain)
$Config=Read-Host 'Please press enter if this is correct, and we will apply this configuration. or CTRL-C to exit'
#configure the Ip stack
$Interface = Get-WmiObject win32_networkadapterconfiguration -filter 'IPEnabled=True'
$Interface.EnableStatic($ip, $netmask)
$Interface.SetGateways($Gateway, 1)
$Interface.SetDNSServerSearchOrder($dns)
$Interface.SetDNSDomain($dnsdomain)
$Interface.SetDynamicDNSRegistration($true)
#Show the user the new IP configuration
ipconfig /allcompartments /all
$Config = Read-Host 'We have reconfigured the NIC. Does the IP configuration for the "Local Area Connection" look right? Press enter to continue to join the domain, or CTRL-C to exit'
Use sample white space to make code readable.
Much of this code does not make sense. You should be using DHCP to set all workstations and most servers with the exception of Domain Controllers.
It will be faster to do this with PowerShell since you do not know batch. Your attempt is not even close.
¯\_(ツ)_/¯

Script or GREP search line for missing quotation marks (opening or closing)

Hi there,
I've being trying to figure out a GREP search that will help me find quotations that haven't been opened or closed properly. Does anyone know if there exists a script that will mark/help me find the quotation marks that incorrectly stand alone? A GREP search line would be fine too.
Following is an example - just to make sure I made myself clear:
'why is the closing quotation mark missing after the question mark? I asked.
'I don't know, this line seems to be fine, with opening and closing quotation mark,' I answered.
Although this line is missing an opening quotation mark.'
Hope somebody can help me, I'm pretty sure I'm not the first person searching for a solution on this issue - sorry, I'm not to bright with scripting or GREP.
Thnx.
Gijs

As you say, it's not waterproof, but it is really helpfull, thanks. The unclosed quotation are easy to find this way.
In Dutch we mainly use single quotation marks (double quotation marks are only used for quotations within quotations). This brings an extra dimension to the issue, since the apostrophe and single quotation mark are the same character. So a phrase like ' I'm having problems finding unopened quotations' with your GREP suggestion will mark the apostrophe in I'm as the closing quotation mark.
So what I'll do is:
1. find unclosed quotations ‘[^’]+?‘ and mark them with a character style WARNING;
2. GREP search ’[^‘]+?’ two following closing quotation marks and make them C=100;
3. GREP search ’[^‘’]+?’ the correct quotations and mark it all K=100;
4. Do a regular search for '^$ any apostrophe/quotation mark followed by a letter and mark them all K=100;
5. Do a regular search for any closing quotation mark left in C=100 and manually WARNING-mark the ones that need to be looked at by the editor.
Step 4 is a bit tricky since any error like 'I agree,'he said (no space after quotation mark) will be marked back to K=100 as well, but those errors I'll probably notice since they're underlined by the grammar control option.
Thanks again for the help.

Help: matrix report grid lines missing for null values only on server side

Hi,
I created a matrix report in pdf format. The output in great when run through report builder locally, it renders all necessary details. However, after the report being moved into AS server, the report does not show grid lines for null values.
It looks to me this has something to do with configurations and hope someone know what needs to be done.
Any suggestions are greatly appreciated.
Jimmy

Thanks for replying.
DESFORMAT is PDF.
There should be a fix as I had same issue with same Oracle version at my previous company. DBA fixed the issue on AS server.
I found your post on 09/28/2010 with a link to patch set: Re: Null value fields disappear in pdf output format
We worked out with the work around without install the patch.
Jimmy
Edited by: WJHORA on Sep 8, 2011 2:16 PM

Mvt. 101 with ML81N for service entry sheet split for every service line

Dear guru.
I have one purchase order position for service (item category D) with three different service line.
I run ML81N and i create the service entry sheet for every service line.
If I see the goods receipts movement generate , the system show 1 movement line with qty 1 and the total of amount in LC of the 3 service line.
Does exist a chance in order that system create 3 different movement lines for every service line with quantity and amount specific.
Thanks

Hi,
I think you have create Service PO with description & UOM .
then that you have mention activity for services ( Service line) . But if you mention n number of service line that all values acumulate to service line of line item.
so, you can't get different entery in accounting document & material document. this always w r t line item of the service PO.
You have to note one think all the service line tiem is unter the line item 10 only.
just check your PO in ME23N.
SAM

Using CSS to change line chart tick mark font

I apologize if this has been covered elsewhere, but I can't find any reference to help with this.
I have create a dark-background theme for my CSS and have run into a bit of a blind spot with the CSS. My chart has a dark background, and I can find no way to change the color of the font on the tick marks. I have resorted for now to setting the individual axis objects setTickLabelFill for now, but it would be nice to be able to set this in CSS.
With this, I can change the font size of the axis labels and tick marks, but the font name and color are ignored for the tick marks:
.axis {
-fx-font: 14px "Palatino Linotype";
-fx-text-fill: white;
Thank you for your help.
- Jim
Edited by: 871682 on Aug 2, 2011 11:47 AM

That did work in 1.3, and I hoped it made it into 2.0, but that setting didn't help.
Setting the -fx-text-fill in -axix-tick-mark .label doesn't work either, or any variation I tried.

Invisible hands for a clock holding the tick mark as a png

I am making the hands of a clock with tick marks held in a particular spot with an invisible bounding box. When I export as a png the bounding box disappears and all I have is the tick mark. Any suggestions? Any help would be appreciated! Maybe a boundindg box isn't the correct description? I have made the hand using the rectangle shape with no fill and no line. The tick mark is contained within this space. But somehow when it is exported using png the invisible containment disappears. I need that to hold my tick mark in place as the hand goes around the clock.
Marci

The image fits inside the rectangle at a precise point. But when I export it, all I get is the tick mark which looks like this without the rectangle
This is what happened the first one when I exported it as a png. The second I matched the artboard and tried to save it as a eps. I still get the same result. I was able to do this originally but it had a white fill. It needed to be transparent. But when I make it transparent the box disappears when it is exported.

Vertical grid lines and Dates on Graph

When I use date values on the x-axis for a graph, the only vertical grid lines that appear in the graph are at the year boundary. For example, if I was showing data for 3 years, I get 3 vertical grid lines; one at each January.
How can I get vertical grid lines at each month?
It will work if I convert the date to character, but then I lose the ability of Oracle Reports to fill in the tick marks for missing dates (say, if there isn't any data between January and March, the graph will still show a label for February).

Hi, Ravens Fan.
Thanks for your reply.
Now, the main loop has a wait statement, but the problem remains. I'm using LabView 2009, and I didn't see this behaviour in the previous version, LabView 8.6.
I send you back the uptaded program, and two snapshots as well:
- snapshot 1: just after pressing "Run", "increment" value takes "maximum" value; due to this, there's only one text marker, at "12:00" (there should be one major grid line and one text marker every 10 minutes as "increment" value is set to 600 before entering the while loop);
- snapshot 2: when pannning, "minor increment" takes "maximum" value, and due to this, vertical grid lines don't show any more (there should be one minor grid line every 5 minutes as "minor increment" is set to 300 before entering the while loop).
Regards,
Francisco
Attachments:
1.jpg ‏309 KB
2.jpg ‏283 KB
XY-Graph. Time Axis problem.vi ‏14 KB

Chart builder grid lines

hello all,
I'm building a graph between 23/2/2005 and 08/03/2005.
my problem is that I get only one grid line in 01/03/2005 and I need grid lines to every day.
tnxs for your help,
shai

Hi,
Has anybody else got the same problem? Do you know a work around??
Please help!!!!
-Swaroop

Spreadsheet component - bottom grid line not displaying in swf file

Hi,
I'm having an issue with the spreadsheet component. I'm using the "Ignore blank cells in Values" option on the behavior tab. This works fine. The problem I'm having is the bottom grid line in the spreadsheet table is not displaying in the swf file. The bottom grid line displays correctly in Preview mode....but is not displaying in the swf file. Anyone have any ideas on why?
Thanks

I'm not sure if I've interpreted your response correctly. Our entire dashboard app is built on the swf files being called from the URL buttons. We are not using HTML files. Are you saying that if I do a file export to HTML that the swf file generated from this will display the bottom grid lines?
I noticed that the spreadsheet component grid lines display correctly in the swf when not checking the ignore blank cells option in the behavior tab.
So what would be our options here.....either uncheck the display grid lines for the spreadsheet component to not display the grid lines at all, or do not use the ignore blank cells option in the behavior tab to display a fixed number of rows each time?
Thanks for the response, Matt.

Hardcoding a 'tick mark' in the script.

I have inserted a sapsymbol('tick' mark) in script by following these steps:
se71->
Window-> text editor->Insert->characters->sap symbols. It automatically takes up the value as 640, but this is getting displayed as' # ' in the layout instead of 'tick' mark.
Do we have to specially handle the sap symbols?
Could someone help me with this.
Thanks in Advance,
Shruti

Hi ,
Thanks for the response.Jus wanted to re-confirm the things.
The 'tick mark' is already available in the list of SAPSymbols in text editor of se71 tcode. I think there is some particular way to use these SAPsymbols. As we can find the id for the tick mark as '00709' in the standard program for symbols .i.e.
'RSTXSYMB'. It gives a list of all the SAPSymbols. I tried using the same id, but still no change in display of that symbol. Could you kindly confirm if there is really no way to use these symbols. I tried almost all possibilities.
Thanks again for ur precious time n input.
Shruti

Axis tick mark algorithm

Hi all,
I've been struggling trying to come up with a suitable algorithm for determining tick marks on an axis based on the range of values the axis should display.
For example, if my initial data set contains the values
[5,20,29,51,60,63,79,95]
I can get the Range of 90
I can specify I want, say, 5 tick marks on my axis, so my interval between marks is 90/5 = 18
so I could create an axis with values displayed of 0,18,36,54,72,90
but what I'd like to display here is 0,25,50,75,100 (ie more useful/readable values)
the axis will also have to cope with floats and negative values, so my data set could be....
[-5,-2.5,3.9,50.2, 80.9]
and if I specified ten tick marks Id want output of something like:
-10,0,10,20,30,40,50,60,70,80
If anyone has any ideas or can point me towards some source which does this kind of calculation I'd be very grateful.
Thanks in advance,
Dylan

In general, since the factor of 10 are 1,2 and 5, you want to place tic marks at units that are either 1, 2 or 5 "units" apart, where "unit" is some power of ten like .01, .1, 1, 10, 100 etc.
Secondly, if your picture has 1000 tic marks, there will be too many of them. If there is only one tic mark, or maybe two, you havent given the person enough to look at.
This argues that there should be some reasonable number of tic mark as a target that you are shooting for, like 10 or 20 or something like that.
SO - given any range, that you want to cover, and given any "unit", and given any choice of multiplier (1, 2 or 5) you could calculate how many tics it would take to cover that range.
Given a target number of tics that you think is optimal you should be able to very quickly find the unit and multiplier that gives you the optimal number of tics.
For extra beauty, draw tics that land on multiples of 10 long, draw tics that land on multiples of 5 medium and draw ones that land on anything else short.
Enjoy!

Obtaining grid lines for every tick mark in a chart

Similar Messages

Maybe you are looking for