Displaying non contract items also in the contract catalogue

Hi SRM guru's
While i am doing a shop using the contract catalogue in SRM 5.0.The non contract items are also displaying in the contract catalogue.
Please let me know what i have to do for displaying only contract items in the contract catalogue.
Thanks in advance.

Hi,
Please check help.sap.com.
http://help.sap.com/saphelp_ccm20/helpdata/en/6e/89c4e2038c49969ab5ede5f6e24bd5/frameset.htm
Regards,
Masa

Similar Messages

Display non-secure items browser alert

Hi All,
I am working on Portal version 7.0 and I get an annoying browser security alert asking whether to display non-secure items whenever I navigate to another workset. If I click 'NO' it displays a Action Canceled screen.
Is there any way to avoid this alert from appearing? Thanks in advance.
Kiran

if it IE do like this
tools-internet options-advanced-security-uncheck warn if changing between secure and nonsecure mode
if it firefox
tools-options-security-settings-deselect the appropriate security warning
reward points if helpful

Is the non-apple item sold in the apple store 100% original?

i was wondering if the non apple items sold in the apple online store are a hundred percent original like the monster beats by dre.
just curious because of the huge price difference of about 200 sgd..

Do you pay 6.99 for insurance because that includes extended warranty? I would get the 16gig 4s personally but I understand where ur coming from. Now they have them and there not in the iconic list so u could bill to account if u can pay it by the end of the next bill. U could use the $99 towards the phone or when u get the charge on the bill pay it then. Just another idea.

Non stock item requisition from the order

Dear all,
Material is not available in stores,i have enter the item category as N in the maintenance order ,system created the Purchase requisition & reservation of same material which will be further converted to Purchase order.
When material goods inward from the store that material automatically issued against that reservation,
is it standerd process of SAP?
And now when i am checking in IW13, against same reservation system shows 'no material withdrawn'
And in the order withdrawn quantity & final issue tick mark is activated.
what may the problem?

Dear Shahanawaz,
When you assign the item category "N" to component in component tab view, Normally PR is generated & When you assign the item category "L" to component in component tab view, Normally Reservation is genereted.
Against reservation we directly issue the material as it is already available in Store. But for Non stock items we need to convert PR to PO. After receipt of the material & Making GR that material directly issued to order & not going to Store. This is standard process. Also you can view Material availability status indicator as the process progress as PR to PO conversion & As the GR is made.
Regards
Makarand Gurjar

Software Center displays no found items under all the tabs

Wanna ask, I often faced issues where the software center on my client machines shows no items found. I have double checked the agent, and it is installed properly (I can see under Actions tab got 11 actions and correctly pointing to the mgmt point). I have
also run the mplist and mpcert, and able to display all the MP's. I leave it for few days, kept forcing to run machine policy actions a few times, but still it displays no item found in my software center... Im assuming that it is not able to communicate
with the MP... Whats the log file to see if the agent is correctly communicating with the mgmt. point and able to get the latest policy?

In the locationservices.log whether the client is able to find the correct MP? Is the client is approved? 80004005 is unspecified error. We should have more details to help you. In the above screenshot client is requesting for the policies but not sure whether
the client received the policy or not.
Also, the following tool Deployment Monitoring tool may also help http://anoopcnair.com/2012/07/11/sccm-configmgr-2012-how-to-use-deployment-monitoring-tool/
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

In 10.10 the "recent documents" pulldown does not display actual recent items--it shows the same items time after time. How can I fix that?

In previous versions of OS 10, the "recent items" pull down from the Apple icon (top left) actually showed recent items. In this version, 10.10, the same items display time after time rather than displaying recent items. How can this be fixed?

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.corerecents.recentsd
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to print item texts in po contract form when the fixed item status is N

Hi all,
I'm trying to print the item texts in the contract forms.
I need to print the item texts when the status is 'N' and at the same time the status is blank in the same form.
I tried using t165p.I'm unable to print the both the message status with N and blank at the same time.
Please guide in this regards.
Thanks and regards,
Krishna

Hi Luis,
Thanks yes, now it get captured soon after changed the item accordingly as you said.
so there is no need of creating hidden item for those item (i.e) &P1_DIS_COURSE_NAME. AND &P1_DIS_DATE.
right??
Regards,
Mini

Updation of contract data for all the follow up documents

In crm I have created a service contract. From this I have created a sales-service order as follow up document. Then from this service order one suspension order.
When I am opening the sales-service order in item details tab and then in contract tab we get the contract details. When i press the follow up document button and choose the suspension order the suspension order is opening and this contract details should come here also but it is not coming. Please suggest whether this can be done by configuration or by badi. If by badi then suggest its name.

Please not that the contract determination works fine when creating a new complaint ... but when the I am trying to create a complaint from service ticket the item level contract determination is not working fine ...
We have configured that the contract should be determined at the item level only option `F`.
I checked in one of the sap document that this cant be achieved by standard .
http://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htmhttp://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htm
Is there a way we can put this code in the BADI eg; CRM_SERVICE_CONTRACT ?? Please note that there is already an implementation of CRM_SERVICE_CONTRACT which is working fine for new service document creation .

SRM purchase order and contract item overview

Hi.
Is it possibles to change the PO and Contract item overview screens as we have a specific need to include one additional column (delivery dates)?As an example, for a SRM PO , we want to include a new free text field we have defined?
Thank you. Vij

You say that
1. you have created the contract with overall service limits.
2. you now referred this contract and created the PO
PO created (ME21N) and Contract details and overall limits entered. Service items adopted from the contract and the 'No Limit' box checked for individual services. All service quantities maintained as 1 no, rates copied from contract.
Please remove the No limit check and keep only the value in contract limits. The system would then force you to enter the additional value in unplanned services during SES creation. The same applies when you are using Other Limits (Mentioned limit in other Limits tab in PO creation)
If it does not work, check message settings for message # SE 347, 364, 365 & 366.
If it still does not work, please open an OSS message to SAP.
Thanks & regards
AHP

How to find the Contract Start date

Hi Friends,
with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
Regards,
Raju.

Hi
naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
Reward with Points
Venkat

Mapping Contract items to CCM Master Catalog

We have created a contract catalog in CCM which creates a two level schema, the top level being identified by the contract number, the sub level being contract_catalog_classification_schema. The one material item in the catalog is attached to the top level of the schema(the contract number). We cannot map this to our schema in the ccm master catalog, the assign category button is alway greyed out. Not sure what we are doing wrong and pretty new at this, can someone help out???
Thanks

Hi Serguei,
Do I need to map the contract Catalog and Master Catalog explicitly?? SAP documentation on this says:
"When you transfer a contract to SAP Catalog Content Management, the system compares the items in the contract with supplier catalogs and SRM product catalogs that already exist in SAP Catalog Authoring Tool. If an item in the contract is the same as an item in an existing supplier catalog or SRM product catalog, SAP Catalog Contract Management <b>automatically</b>:
1) Copies the additional values available in the supplier catalog or SRM product catalog to the contract catalog
2) Maps the contract information for the item to the master catalog, if the corresponding item in the supplier catalog or SRM product catalog has been assigned for mapping.
So, the mapping has to happen automatically.. isn't it?
Regards,
Waheed.
PS: http://help.sap.com/saphelp_ccm20/helpdata/en/90/fe349497f841f29448b72d6dfefe8f/content.htm

Warranty as Service Contract Item.

Hi,
in help.sap.com I've read the following sentence related to "Service Contract Items":
"element of the service contract in which you define the services or products you are providing the customer with under the terms of the service contract. A service contract item can be any of the following:
    * Service (for example, a particular task)
    * Material (for example, a spare part)
    * Time (for example, an hourly rate for a technicianu2019s time on the job)
    * Response time (how soon you are obligated to respond to a problem call)
    * Warranty (the agreed duration and coverage)
So I would be interested in using Warranty as a service contract item, but i don't know how to proceed.
Thanks in advance,
Luis.

Does anybody know the answer or should I close this message?

Item Category N (non-stock item) in BOM creation - Preq Generation

Hi All
I have a material component that is planned in APO and not in ECC6. We would like to keep the one BOM for the finished good. Problem is that when we perform the backflush in ECC6, the system wants to backflush the material and causes errors due to missing stock.
So I assigned the material as a non stock item in the BOM but the system will auto generate a purchase requisitions for Non stock bom components (item category N) when the process order is created. It is possible to turn off the auto creation of the purchase req for non stock bom components?
I have tried the following:
- Explosion type in item data, created new key with 'Switch off planning' indicator set in system configuration
- created new 'Z' item category with inventory management de-selected
Both approaches causes system error: Puchase data of material in not maintained
I also tried leaving as a stock item with the bulk material indicator selected in the item data. This does not work as the cif will then exclude the component when data is transferred to APO
Funny enough, the system does not generate a purchase req for non stock bom items when using Repetitive Manufacturing. Any help will be greatly appreciated
kind regards
Grant brockelbank

Hello Vivek
Thank you for your response
The item is a non stock item. I do not want this item to be backflushed at all. This can be achieved using the 'N' non stock item category but the problem is that the system will attempt to generate a purchase requisition when the process order is created.
I do not want the system to generate a purchase req in ECC6 as this item is a planning material that is planned in APO (used for medium to long term planning in a simulation version). We are hoping to use the one Bom for ECC6 and APO planning. The generation of the purchase reqs is a bit of a waste as we will never convert them and there is potential to cause issues for purchasing.
Any other thoughts?
Thanks again for your help
kind regards
Grant

How to value non-table items in Forms

Portal 3.0.7.6.2 on NT
I am trying to display non-table items on a Form. I want to do things like: Display the Credit Card Type (non-table item) based on the Credit Card Number (table column). Use a foreigh key (table column) to retrieve related data for display/information only on the Form. The doesn't appear to be p_session variables for these 'added' Form items so I can't use the p_session functions. Any ideas??? I'd prefer a PL/SQL solution.

Hi Michael,
As Dmitry said that values for non table form field cannot be displayed completely using pl/sql, u can use some pl/sql and some javascript to achieve this .
Say, take the example of the Emp table where I would like to display the department name for the deptno. Here I'll use pl/sql to retrieve the value of department name using the deptno and use javascript to display the results in the new field added to the form.
Steps :
1> Create a form say, on the emp table
2> In the field formatting section, add a new item of the type text box and add a javascript event onFocus and give the foll javascript function call for the same :-
javascript:getval(this)
3> In the additional pl/sql section, for the "after displaying page ..." part we'll add the following pl/sql code :-
declare
l_dno number(4) default null;
l_desc varchar2(100);
begin
l_dno := p_session.get_value_as_NUMBER
(p_block_name => 'DEFAULT',
p_attribute_name => 'A_DEPTNO',
p_index => 1);
if l_dno is not null then
begin
select dname into l_desc
from scott.dept
where deptno = l_dno;
exception
when others then
null;
end ;
end if;
htp.p('<script>');
htp.p('function getval(ele){'| |chr(10)| |
'ele.value = "'| |nvl(l_desc,' ')| |'";}');
htp.p('</script>');
end;
4> Run the form and perform a query. Place the cursor on the desc field after the page reloads with results. The department name would come up.
Hope this helps.

MR11- for non material item

I just try to do for one PO with all non material item and
I can't do MR11 for non material item..
error:      Error while determining the currency types for 6302400500 00010

Hello,
a non material item can be a text item but it can be also a service item.
This depends from your customizing. Which item type is relevant for your non material item.
In the item type you can maintain if an item is relvant for pricing or not.
Please have a look in transaction VOV7. Here you can set the flag 'Pricing'.
This flag can have the following specification:
      Blank No pricing
X     Pricing standard
A     Pricing for empties
B     Pricing for free goods (100% discount)
I hope that the information are helpful.
Best regards
Claudia
Edited by: Claudia Neudeck on Jul 17, 2008 8:17 AM

Displaying non contract items also in the contract catalogue

Similar Messages

Maybe you are looking for