Displaying Shared Volumes on network
I have a network of 3 macs running 10.5.4. I set up file sharing on one of the machines and allowed sharing of its external drive. Everything works fine.
My question is, how can I get that volume to automatically show up under the "shared" area on the left side of a finder window? The computer shows up there, then I have to click the shared computer, then select the shared drive. How can I get the drive to show up just like the computer does in the shared tab of my finder windows? Is there a trick?
Kevin
Although it is not exactly what you are asking for, [this hint|http://www.macosxhints.com/article.php?story=20080715153043910] may provide what you need.
Cheers,
Rodney
Similar Messages
-
Unable to configure Time Machine backups to shared volume on network
I've been unable to coax Time Machine (TM) into using a networked shared volume that SuperDuper! accesses without a hitch.
My wife and I have laptops (TiBook and MacBook Pro, respectively), and we have a G4 Mac Mini with an external 300 GB HD. The Mini is connected to a wired Ethernet port on a GigE Airport base station (I've long ago given up on connecting that HD to the Airport). Our laptops connect wirelessly. All three machines are now running 10.5, and I've checked that the Mini is sharing the external HD via System Preferences. My wife and I both have accounts on the Mini, and those accounts provide read/write access on the external HD. Mounting that volume from our laptops works perfectly, as does backing up to it using SuperDuper! TM, however, doesn't recognize that volume as a backup location.
Any ideas?
Thanks,
AndreasAdapting the instruction in this post worked for us. I connected to the Mini via ssh and entered the commands to enable the external HD. It then showed up as a TM backup location on both of our computers, and the progress meters for the initial backup are ticking away.
Cheers,
Andreas -
Can't connect a Bootcamp Volume to networked Macs
The question: When adding a Network Place in WindowsXP so that I can connect it to a home networked Mac, what is the correct address statement I should provide for the Add Network Place Wizard? And what should I do on the Mac to enable access? All Mac's use Leopard 10.5.1.
I am trying to access home networked Macs from a Bootcamp volume on another Mac. (The Bootcamp volume has MacDrive6 installed so that WindowsXP can read MacOSX drives.)
I have run out of ideas trying to get WindowsXP to access the contents of Macs on the network.
The Sharing Prefs pane on the Mac tells me to browse for the Mac's computer name, or use computername.local. This prefs pane also advises using afp://IPaddress instead of browsing for computername. Both styles are rejected by Windows so I assume that this advice is only suited to accessing from the MacOS.
The joy of all this is that Windows DOES see computername when browsing the network but offers no further moves. ie., there is no chance for me to state that this is where I want to go.
If I use Window's suggested connection language, eg., //computername/share, Windows DOES see the Mac but claims my foldername is invalid. We do get to the point of inserting the admin username and password as required for the Mac. Then I am told, invalid folder. I have tried various versions of the name, long and short, but always the folder is invalid.
Leopard File Sharing Help says I should enable the SMB protocol. I did. Whatever I try as the SMB address in WindowsXP, it's denied by Windows as an invalid foldername.
In the File Sharing prefs pane I have also set up, as shared folders, the network Mac's HDD names, home folders, &c. Nothing works.
Since I used to have no problems with this business, has Leopard somehow messed up?*"If I use Window's suggested connection language, eg., //computername/share..."*
Your slashes are backwards. try \\servername\sharename -
Problems with Spotlight searching of shared volumes
According to: http://www.apple.com/macosx/features/300.html#spotlight, I should be able to "...search any connected Mac with Personal File Sharing enabled or a file server that’s sharing its files."
It doesn't specify what "file server", so I presume it means Spotlight should be able to search any mounted shared volume (assuming, of course, that indexing has been enabled).
I have a NAS device that I want to be able to search with Spotlight. According to mdutil, the volume is enabled for indexing, but I don't see any results when I search under "Shared" in Finder via Cmd+F. (I checked, and there's no .Spotlight folders on the volume.)
From what I recall, under Tiger you could manually specify a network volume to index, but if you dismounted the volume, you'd have to re-enable indexing on next mount. This worked for other file systems (such as Fat32 & NTFS), as well as for HFS+ drives.
According to mdutil in Leopard, the volume is still enabled for indexing even across dismounts. The NAS drive is not HFS+ formatted, but uses XFS.
I've tried deleting the index, to no avail.
Has anyone successfully used Spotlight to search mounted volumes on volumes not shared via another Mac?
Am I missing something?You have not missed anything.... Leopard promises but does NOT deliver.
I use an AFP server with Bonjour enabled. And NO NO NO Spotlight search is possible on this network volume...
This is outrageous and FALSE information....
Oh and - that Leopard is Sporting 300 new features is false info too.... Not even the "What is New in Leopard" says anything about 300 features.. But it sounds great doesn't it.... -
How do I connect to a Windows Workgroup and mount a shared volume?
I have set up a network at home with my Mac G5 and my PC. I have a workgroup called "HOME". The PC can see my mac drive as a network place and I can access and browse it perfectly fine.
However I have a drive on my PC which I have set up as a shared volume on the PC. I want to mount that shared volume on my Mac. When I set up the share on the PC, I am not prompted to enter a password, and the only password I am aware of is the one I use to log on.
According to the instructions I am supposed to enter the IP address and a "sharename", but I have no idea what the sharename is. If I enter the share name of the volume I want to mount, I get a dialog box which requires a password. It sees the "HOME" workgroup and that is already filled out in the Workgroup window.
It has entered my Mac administrator account name in the Name box. I don't know if this is what name it needs, but what ever combination of names and passwords I use, including my PC logon name and password, I always get the error message "cannot connect because the name or password is not correct".
I have tried using different formats for the smb://Servername/sharename address, but everything I have tried gives the same result.
I have seen many other postings on this subject, all with similar problems, but so far I've yet to see an answer. A disscussion from 2004 said this was a known issue, but surely there must have been a fix by now?
I have read many of the mac documents on this subject but none specifically tells you what the sharename is and how you set a password for it.
Thanks in advance
DavidOK - I have answered my own question, so if anyone else has this problem, you may like to know!
I needed to know what sharename to use to log on. On the Windows PC I was under the imprression that the windows log on was my user name. But if you right click on the My Computer and go to manage, you will see Local Users and Groups. Under Users, you will see all the user accounts on the PC. Even though I only ever set up one and it was called "David" that doesn't actually count as the user name.
If you look at the headings at the top, you will see that whatever account you think you are in, the chances are it actually has the name "User". It is what ever is in the Name column that the Mac needs, not what is in the Full Name column which is what you log on as. You can't change this, but when you connect to server, you can enter the SMB script smb://USER@(name of PC or IP address)/share name.
If you wish to mount a volume rather than a shared folder, simply type in the windows drive letter followed by the "$" - ie D$. The password is your log on password on the PC. Otherwise you can set up a folder share on the PC in the usual way, and give it a name. This will be the share name you enter in your smb script.
NONE of this is very clear in any of the Mac Networking Help guides that I have trawled through, so if they were to add it, you might help some more people...
Thanks,
David
G5 Mac OS X (10.4.6) -
Hyper-V cluster Backup causes virtual machine reboots for common Cluster Shared Volumes members.
I am having a problem where my VMs are rebooting while other VMs that share the same CSV are being backed up. I have provided all the information that I have gather to this point below. If I have missed anything, please let me know.
My HyperV Cluster configuration:
5 Node Cluster running 2008R2 Core DataCenter w/SP1. All updates as released by WSUS that will install on a Core installation
Each Node has 8 NICs configured as follows:
NIC1 - Management/Campus access (26.x VLAN)
NIC2 - iSCSI dedicated (22.x VLAN)
NIC3 - Live Migration (28.x VLAN)
NIC4 - Heartbeat (20.x VLAN)
NIC5 - VSwitch (26.x VLAN)
NIC6 - VSwitch (18.x VLAN)
NIC7 - VSwitch (27.x VLAN)
NIC8 - VSwitch (22.x VLAN)
Following hotfixes additional installed by MS guidance (either while build or when troubleshooting stability issue in Jan 2013)
KB2531907 - Was installed during original building of cluster
KB2705759 - Installed during troubleshooting in early Jan2013
KB2684681 - Installed during troubleshooting in early Jan2013
KB2685891 - Installed during troubleshooting in early Jan2013
KB2639032 - Installed during troubleshooting in early Jan2013
Original cluster build was two hosts with quorum drive. Initial two hosts were HST1 and HST5
Next host added was HST3, then HST6 and finally HST2.
NOTE: HST4 hardware was used in different project and HST6 will eventually become HST4
Validation of cluster comes with warning for following things:
Updates inconsistent across hosts
I have tried to manually install "missing" updates and they were not applicable
Most likely cause is different build times for each machine in cluster
HST1 and HST5 are both the same level because they were built at same time
HST3 was not rebuilt from scratch due to time constraints and it actually goes back to Pre-SP1 and has a larger list of updates that others are lacking and hence the inconsistency
HST6 was built from scratch but has more updates missing than 1 or 5 (10 missing instead of 7)
HST2 was most recently built and it has the most missing updates (15)
Storage - List Potential Cluster Disks
It says there are Persistent Reservations on all 14 of my CSV volumes and thinks they are from another cluster.
They are removed from the validation set for this reason. These iSCSI volumes/disks were all created new for
this cluster and have never been a part of any other cluster.
When I run the Cluster Validation wizard, I get a slew of Event ID 5120 from FailoverClustering. Wording of error:
Cluster Shared Volume 'Volume12' ('Cluster Disk 13') is no longer available on this node because of
'STATUS_MEDIA_WRITE_PROTECTED(c00000a2)'. All I/O will temporarily be queued until a path to the
volume is reestablished.
Under Storage and Cluster Shared VOlumes in Failover Cluster Manager, all disks show online and there is no negative effect of the errors.
Cluster Shared Volumes
We have 14 CSVs that are all iSCSI attached to all 5 hosts. They are housed on an HP P4500G2 (LeftHand) SAN.
I have limited the number of VMs to no more than 7 per CSV as per best practices documentation from HP/Lefthand
VMs in each CSV are spread out amonst all 5 hosts (as you would expect)
Backup software we use is BackupChain from BackupChain.com.
Problem we are having:
When backup kicks off for a VM, all VMs on same CSV reboot without warning. This normally happens within seconds of the backup starting
What have to done to troubleshoot this:
We have tried rebalancing our backups
Originally, I had backup jobs scheduled to kick off on Friday or Saturday evening after 9pm
2 or 3 hosts would be backing up VMs (Serially; one VM per host at a time) each night.
I changed my backup scheduled so that of my 90 VMs, only one per CSV is backing up at the same time
I mapped out my Hosts and CSVs and scheduled my backups to run on week nights where each night, there
is only one VM backed up per CSV. All VMs can be backed up over 5 nights (there are some VMs that don't
get backed up). I also staggered the start times for each Host so that only one Host would be starting
in the same timeframe. There was some overlap for Hosts that had backups that ran longer than 1 hour.
Testing this new schedule did not fix my problem. It only made it more clear. As each backup timeframe
started, whichever CSV the first VM to start was on would have all of their VMs reboot and come back up.
I then thought maybe I was overloading the network still so I decided to disable all of the scheduled backup
and run it manually. Kicking off a backup on a single VM, in most cases, will cause the reboot of common
CSV members.
Ok, maybe there is something wrong with my backup software.
Downloaded a Demo of Veeam and installed it onto my cluster.
Did a test backup of one VM and I had not problems.
Did a test backup of a second VM and I had the same problem. All VMs on same CSV rebooted
Ok, it is not my backup software. Apparently it is VSS. I have looked through various websites. The best troubleshooting
site I have found for VSS in one place it on BackupChain.com (http://backupchain.com/hyper-v-backup/Troubleshooting.html)
I have tested almost every process on there list and I will lay out results below:
1. I have rebooted HST6 and problems still persist
2. When I run VSSADMIN delete shadows /all, I have no shadows to delete on any of my 5 nodes
When I run VSSADMIN list writers, I have no error messages on any writers on any node...
3. When I check the listed registry key, I only have the build in MS VSS writer listed (I am using software VSS)
4. When I run VSSADMIN Resize ShadowStorge command, there is no shadow storage on any node
5. I have completed the registration and service cycling on HST6 as laid out here and most of the stuff "errors"
Only a few of the DLL's actually register.
6. HyperV Integration Services were reconciled when I worked with MS in early January and I have no indication of
further issue here.
7. I did not complete the step to delete the Subscriptions because, again, I have no error messages when I list writers
8. I removed the Veeam software that I had installed to test (it hadn't added any VSS Writer anyway though)
9. I can't realistically uninstall my HyperV and test VSS
10. Already have latest SPs and Updates
11. This is part of step 5 so I already did this. This seems to be a rehash of various other stratgies
I have used the VSS Troubleshooter that is part of BackupChain (Ctrl-T) and I get the following error:
ERROR: Selected writer 'Microsoft Hyper-V VSS Writer' is in failed state!
- Status: 8 (VSS_WS_FAILED_AT_PREPARE_SNAPSHOT)
- Writer Failure code: 0x800423f0 (<Unknown error code>)
- Writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
- Instance ID: {d55b6934-1c8d-46ab-a43f-4f997f18dc71}
VSS snapshot creation failed with result: 8000FFFF
VSS errors in event viewer. Below are representative errors I have received from various Nodes of my cluster:
I have various of the below spread out over all hosts except for HST6
Source: VolSnap, Event ID 10, The shadow copy of volume took too long to install
Source: VolSnap, Event ID 16, The shadow copies of volume x were aborted because volume y, which contains shadow copy storage for this shadow copy, wa force dismounted.
Source: VolSnap, Event ID 27, The shadow copies of volume x were aborted during detection because a critical control file could not be opened.
I only have one instance of each of these and both of the below are from HST3
Source: VSS, Event ID 12293, Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details RevertToSnashot [hr = 0x80042302, A Volume Shadow Copy Service component encountered an
unexpected error.
Source: VSS, Event ID 8193, Volume Shadow Copy Service error: Unexpected error calling routine GetOverlappedResult. hr = 0x80070057, The parameter is incorrect.
So, basically, everything I have tried has resulted in no success towards solving this problem.
I would appreciate anything assistance that can be provided.
Thanks,
Charles J. Palmer
Wright FloodTim,
Thanks for the reply. I ran the first two commands and got this:
Name
Role Metric
Cluster Network 1
3 10000
Cluster Network 2 - HeartBeat 1 1300
Cluster Network 3 - iSCSI 0 10100
Cluster Network 4 - LiveMigration 1 1200
When you look at the properties of each network, this is how I have it configured:
Cluster Network 1 - Allow cluster network communications on this network and Allow clients to connect through this network (26.x subnet)
Cluster Network 2 - Allow cluster network communications on this network. New network added while working with Microsoft support last month. (28.x subnet)
Cluster Network 3 - Do not allow cluster network communications on this network. (22.x subnet)
Cluster Network 4 - Allow cluster network communications on this network. Existing but not configured to be used by VMs for Live Migration until MS corrected. (20.x subnet)
Should I modify my metrics further or are the current values sufficient.
I worked with an MS support rep because my cluster (once I added the 5th host) stopped being able to live migrate VMs and I had VMs host jumping on startup. It was a mess for a couple of days. They had me add the Heartbeat network as part of the solution
to my problem. There doesn't seem to be anywhere to configure a network specifically for CSV so I would assume it would use (based on my metrics above) Cluster Network 4 and then Cluster Network 2 for CSV communications and would fail back to the Cluster Network
1 if both 2 and 4 were down/inaccessible.
As to the iSCSI getting a second NIC, I would love to but management wants separation of our VMs by subnet and role and hence why I need the 4 VSwitch NICs. I would have to look at adding an additional quad port NIC to my servers and I would be having to
use half height cards for 2 of my 5 servers for that to work.
But, on that note, it doesn't appear to actually be a bandwidth issue. I can run a backup for a single VM and get nothing on the network card (It caused the reboots before any real data has even started to pass apparently) and still the problem occurs.
As to Backup Chain, I have been working with the vendor and they are telling my the issue is with VSS. They also say they support CSV as well. If you go to this page (http://backupchain.com/Hyper-V-Backup-Software.html)
they say they support CSVs. Their tech support has been very helpful but unfortunately, nothing has fixed the problem.
What is annoying is that every backup doesn't cause a problem. I have a daily backup of one of our machines that runs fine without initiating any additional reboots. But most every other backup job will trigger the VMs on the common CSV to reboot.
I understood about the updates but I had to "prove" it to the MS tech I was on the phone with and hence I brought it up. I understand on the storage as well. Why give a warning for something that is working though... I think that is just a poor indicator
that it doesn't explain that in the report.
At a loss for what else I can do,
Charles J. Palmer -
How to recover deleted files from a shared volume?
Setup - Mac Mini Server (OSX 10.8.4, Server 2.2.1(169)), 256GB Flash drive, System data only. External 8TB G-Raid holds all business data, backed up to a LaCie 6TB Quadra using Intego Backup Manager Pro 1.0.9. The G-Raid has two folders 0_Clients and DATA which are shared through OS X Server.
Situation, told customer backup drive (LaCie) was almost full mid April, purge data. They didn't and backups stopped running at end of April. Yesterday, they accidentally deleted a folder / with files. User was on an iMac, connected to the share DATA when deleted. Called in a panic of course. New folder and files were created after the last back was executed.
Question - Folder and files were deleted but Trash was not "emptied". Researching, I learned about hidden trash folders. So, I was hopeful I'd find the info in the hidden /.Trashes folder on the shared Volume G-Raid. My understanding is that that's where it would go, until an "empty trash" is executed. I've shown all hidden files / folders via "defaults write com.apple.finder AppleShowAllFiles TRUE". Navigated to the volume G-Raid/.Trashes and the folder/ files are not there. Is there another location where they may possibly be??? Or, are they hosed and it's really gone "Deleted"???
ThxWith a locally connected volume e.g. a hard disk or USB flash drive, when you delete a file it does get moved to the 'Trash' folder and until the Trash is emptied can still be retrieved. However with a network volume if a logged in user deletes a file or folder it normally gets deleted immediately. (The user would get a message saying "This item will be deleted immediately. You can’t undo this action.")
So the likelihood is that the items are not in any trash folder even if you found and looked in them.
It used to be the case that even when using a network file server you still had the benefit of files first going to the trash folder but Apple stopped doing this a long time ago. The network trash folder would be at the top level of the network share. (If it exists and works.) Some NAS devices might still support it but as I mentioned I don't believe Apple themselves do.
So you could try using Terminal.app to look for an invisible folder at the top-level folder of the network share, if the network share is a folder called 'Fred' then this invisible folder would be in 'Fred' and would be called "Network Trash Folder". You can try looking for this either on the server or from a logged in client.
Do ls -la in Terminal.app the 'a' flag means show all including invisible files.
As you have probably guessed by now it is almost certainly the case these files are lost and cannot be retrieved. The users unfortunately are guilty of multiple mistakes.
They ignored your warning about the backup drive
They deleted something they should not have
They ignored the warning the Mac would have shown about "This item will be deleted immediately. You can’t undo this action."
I would add an additional error that they and perhaps you as their advisor are guilty of. Never rely on a single level of backup, ideally you should have a rotating set of backups i.e. one for each day - Monday, Tuesday, etc. and even more importantly should store these off-site unless being used so that in the even of a fire, flood or other disaster you still have intact backups.
In theory ACL permissions can be set to allow reading, allow writing but disallow deleting. Unfortunately in the real world trying to use the disallow deleting option is a waste of time. This is because many programs 'save' changes by saving a new temporary file, deleting the original file, and renaming the temporary file to the original name. This will not work if you block deleting. -
Cluster shared volume disappear... STATUS_MEDIA_WRITE_PROTECTED(c00000a2)
Hi all, I am having an issue hopefully someone can help me with. I have recently inherited a 2 node cluster,
both nodes are one half of an ASUS
RS702D-E6/PS8 so both nodes should be near identical. They are both running Hyper-V Server 2008 R2 hosting some 14 VM's.
Each node is hooked up via cat5e to a Promise
VessRAID 1830i via iSCSI using one of the servers onboard NICs each, whose cluster network is setup as Disabled for cluster use (the way I think it is supposed to be not the way I had originally inherited it) on it's own Class A Subnet and on it's own
private physical switch...
The SAN hosts a 30GB CSV Witness Disk and 2 2TB CSV Volumes, one for each node labeled Volume1 and Volume2. Some VHD's on each.
The Cluster Clients connect to the rest of the company via the Virtual ExternalNIC adapters created in Hyper-V manager but physically are off of Intel ET Dual Gigabit adapters
wired into our main core switch which is set up with class c subnets.
I also have a crossover cable wired up running to the other ports on the Intel ET Dual Port NICs using yet a third Class B Subnet and is configured in the Failover Cluster
Manger as internal so there are 3 ipv4 Cluster networks total.
Even though the cluster passes the validation tests with flying colors I am not convinced all is well. With Hyperv1 or node 1,
I can move the CSV's and machines over to hyperv2 or node 2, stop the cluster service on 1 and perform maintenance such as a reboot or install patches if needed. When it reboots or I restart the cluster service to bring it back online,
it is well behaved leaving hyperv2 the owner of all 3 CSV's Witness, Volume 1 and 2. I can then pass them back or split them up any which way and at no point is cluster service interrupted or noticed by users, duh I know this is how it is SUPPOSED to work
but...
if I try the same thing with Node 2, that is move the witness and volumes to node 1 as owner and migrate all VM's over, stop cluster service on node 2, do whatever I have
to do and reboot, as soon as node 2 tries to go back online, it tries to snatch volume 2 back, but it never succeeds and then the following error is logged in cluster event log:
Hyperv1
Event ID: 5120
Source: Microsoft-Windows-FailoverClustering
Task Category: Cluster Shared Volume
The listed message is:
Cluster Shared Volume 'Volume2' ('HyperV1 Disk') is no longer available on this node because of 'STATUS_MEDIA_WRITE_PROTECTED(c00000a2)'. All I/O will temporarily be queued until
a path to the volume is reestablished.
Followed 4 seconds later by:
Hyperv1
event ID: 1069
Source: Microsoft-Windows-FailoverClustering
Task Catagory: Resource Control Manager
Message: Cluster Resource 'Hyperv1 Disk in clustered service or application '75d88aa3-8ecf-47c7-98e7-6099e56a097d'
failed.
- AND -
2 of the following:
Hyperv1
event ID: 1038
Source: Microsoft-Windows-FailoverClustering
Task Catagory: Physical Disk Resource
Message: Ownership of cluster disk 'HyperV1 Disk' has been unexpectedly lost by this node. Run the Validate
a Configuration wizard to check your storage configuration.
Followed 1 second later by another 1069 and then various machines are failing messages.
If you browse to
\\hyperv-1\c$\clusterstorage\ or
\\hyperv-2\c$\Clusterstorage\, Volume 2 is indeed missing!!
This has caused me to panic a few times as the first time I saw this I thought everything was lost but I can get it back by stopping the service on node 1 or shutting it
down, restarting node 2 or the service on node 2 and waiting forever for the disk to list as failed and then shortly thereafter it comes back online. I can then boot node 1 back up and let it start servicing the cluster again. It doesn’t pull the same
craziness node 2 does when it comes online; it leaves all ownership with 2 unless I tell I to move.
I am very new to clusters and all I know at this point is this is pretty cool stuff but basically if it is running don’t mess with it is the attitude I have taken
with it but there is a significant amount of money tied up in this hardware and we should be able to leverage this as needed, not wonder if it is going to act up again.
To me it seems for a ‘failover’ cluster it should be way more robust than this...
I can go into way more detail if needed but I didn’t see any other posts on this specific issue no matter what forum I scoured. I’m obviously looking for advice
on how to get this resolved as well as advice on whether or not I wired the cluster networks correctly. I am also not sure about what protocols are bound to what nics anymore and what the binding order should be, could this be what is causing my issue?
I have NVSPBIND and NVSPSCRUB on both boxes if needed.
Thanks!
-LWHello Ravikumar,
Thanks about your attention!
All disks are Online, see below the status of disks, but the problem continues, any ideas?
PS.: For your information, all disks are delivered to hosts by SAN/HBA and all tests from Cluster Validation are passed.
PS C:\Users\hyperv_admin> Get-ClusterSharedVolume
Name State Node
hyperv-04_vol1_fc
Online vmserver27
hyperv-04_vol2_fc
Online vmserver26
hyperv-04_vol3_sata
Online vmserver25
hyperv-04_vol4_sata
Online vmserver27
See below the patches applied on my hosts:
KB2263829 http://support.microsoft.com/?kbid=2263829
KB2425227 http://support.microsoft.com/?kbid=2425227
KB2484033 http://support.microsoft.com/?kbid=2484033
KB2488113 http://support.microsoft.com/?kbid=2488113
KB2492386 http://support.microsoft.com/?kbid=2492386
KB2494016 http://support.microsoft.com/?kbid=2494016
KB2494162 http://support.microsoft.com/?kbid=2494162
KB2505438 http://support.microsoft.com/?kbid=2505438
KB2506014 http://support.microsoft.com/?kbid=2506014
KB2506212 http://support.microsoft.com/?kbid=2506212
KB2506928 http://support.microsoft.com/?kbid=2506928
KB2507618 http://support.microsoft.com/?kbid=2507618
KB2509553 http://support.microsoft.com/?kbid=2509553
KB2510531 http://support.microsoft.com/?kbid=2510531
KB2511250 http://support.microsoft.com/?kbid=2511250
KB2511455 http://support.microsoft.com/?kbid=2511455
KB2512715 http://support.microsoft.com/?kbid=2512715
KB2515325 http://support.microsoft.com/?kbid=2515325
KB2518869 http://support.microsoft.com/?kbid=2518869
KB2520235 http://support.microsoft.com/?kbid=2520235
KB2522422 http://support.microsoft.com/?kbid=2522422
KB2525835 http://support.microsoft.com/?kbid=2525835
KB2529073 http://support.microsoft.com/?kbid=2529073
KB2531907 http://support.microsoft.com/?kbid=2531907
KB2533552 http://support.microsoft.com/?kbid=2533552
KB2536275 http://support.microsoft.com/?kbid=2536275
KB2536276 http://support.microsoft.com/?kbid=2536276
KB2541014 http://support.microsoft.com/?kbid=2541014
KB2544521 http://support.microsoft.com/?kbid=2544521
KB2544893 http://support.microsoft.com/?kbid=2544893
KB2545698 http://support.microsoft.com/?kbid=2545698
KB2547666 http://support.microsoft.com/?kbid=2547666
KB2550886 http://support.microsoft.com/?kbid=2550886
KB2552040 http://support.microsoft.com/?kbid=2552040
KB2552343 http://support.microsoft.com/?kbid=2552343
KB2556532 http://support.microsoft.com/?kbid=2556532
KB2560656 http://support.microsoft.com/?kbid=2560656
KB2563227 http://support.microsoft.com/?kbid=2563227
KB2564958 http://support.microsoft.com/?kbid=2564958
KB2567680 http://support.microsoft.com/?kbid=2567680
KB2570947 http://support.microsoft.com/?kbid=2570947
KB2572077 http://support.microsoft.com/?kbid=2572077
KB2584146 http://support.microsoft.com/?kbid=2584146
KB2585542 http://support.microsoft.com/?kbid=2585542
KB2588516 http://support.microsoft.com/?kbid=2588516
KB2598845 http://support.microsoft.com/?kbid=2598845
KB2603229 http://support.microsoft.com/?kbid=2603229
KB2607047 http://support.microsoft.com/?kbid=2607047
KB2608658 http://support.microsoft.com/?kbid=2608658
KB2618451 http://support.microsoft.com/?kbid=2618451
KB2620704 http://support.microsoft.com/?kbid=2620704
KB2620712 http://support.microsoft.com/?kbid=2620712
KB2621440 http://support.microsoft.com/?kbid=2621440
KB2631813 http://support.microsoft.com/?kbid=2631813
KB2632503 http://support.microsoft.com/?kbid=2632503
KB2633873 http://support.microsoft.com/?kbid=2633873
KB2633952 http://support.microsoft.com/?kbid=2633952
KB2636573 http://support.microsoft.com/?kbid=2636573
KB2639308 http://support.microsoft.com/?kbid=2639308
KB2640148 http://support.microsoft.com/?kbid=2640148
KB2641653 http://support.microsoft.com/?kbid=2641653
KB2641690 http://support.microsoft.com/?kbid=2641690
KB2643719 http://support.microsoft.com/?kbid=2643719
KB2644615 http://support.microsoft.com/?kbid=2644615
KB2645640 http://support.microsoft.com/?kbid=2645640
KB2647516 http://support.microsoft.com/?kbid=2647516
KB2647518 http://support.microsoft.com/?kbid=2647518
KB2654428
http://support.microsoft.com/?kbid=2654428
KB2656356 http://support.microsoft.com/?kbid=2656356
KB2660075 http://support.microsoft.com/?kbid=2660075
KB2665364 http://support.microsoft.com/?kbid=2665364
KB2667402 http://support.microsoft.com/?kbid=2667402
KB976902 http://support.microsoft.com/?kbid=976902
KB982018
http://support.microsoft.com/?kbid=982018
Thanks
Ricardo -
Cluster Shared Volume disappeared after taking the volume offline for Validation Tests.
Hi,
After an unknown issue with one of our Hyper-V 4 Node cluster running on Server 2008 R2 SP1 with fibre channel NEC D3-10 SAN Storage all our cluster shared volumes were in redirecting mode and I was unable to get them back online. Only after rebooting all
the nodes one by one the disks came back online. Eventlog messages indicated that I had to test my cluster validation. After shutting down all the virtual machines I set all the cluster shared volumes offline and started the complete validation test. The following
warnings/errors appeared during the test.
An error occurred while executing the test.
An error occurred retrieving the
disk information for the resource 'VSC2_DATA_H'.
Element not found (Validate Volume Consistency Test)
Cluster disk 4 is a Microsoft MPIO based disk
Cluster disk 4 from node has 4 usable path(s) to storage target
Cluster disk 4 from node has 4 usable path(s) to storage target
Cluster disk 4 is not managed by Microsoft MPIO from node
Cluster disk 4 is not managed by Microsoft MPIO from node (Validate Microsoft MPIO-based disks test)
SCSI page 83h VPD descriptors for cluster disk 4 and 5 match (Validate SCSI device Vital Product Data (VPD) test)
After the test the cluster shared volume was disappeared (the resource is online).
Cluster events that are logged
Cluster physical disk resource 'DATA_H' cannot be brought online because the associated disk could not be found. The expected signature of the disk was '{d6e6a1e0-161e-4fe2-9ca0-998dc89a6f25}'. If the disk was replaced or restored, in the Failover Cluster
Manager snap-in, you can use the Repair function (in the properties sheet for the disk) to repair the new or restored disk. If the disk will not be replaced, delete the associated disk resource. (Event 1034)
Cluster disk resource found the disk identifier to be stale. This may be expected if a restore operation was just performed or if this cluster uses replicated storage. The DiskSignature or DiskUniqueIds property for the disk resource has been corrected.
(Event 1568)
In disk management the disk is unallocated, unknown, Reserved. When the resource is on one node and i open disk management i get the warning that i have to initialize the disk. I did not do this yet.
Reading from other posts i think that the partition table got corrupted but i have no idea how to get it back. I found the following information but it's not enough for me to go ahead with: Using a tool like TestDisk to rewrite the partition table. then
rewriting the uniqueID to the disk brought everything back. But still no explaination as to why we had our "High Availability" Fail Over cluster down for nearly 2 Days. This happened to us twice within the past week.
Anybody that an idea how to solve this? I think my data is still intact.
Thanx for taking the time to read this.
DJITS.Hi,
Error information you provided indicate disk connection failure issue, please confirm shared disk 4 is available:
To review hardware, connections, and configuration of a disk in cluster storage:
On each node in the cluster, open Disk Management (which is in Server Manager under Storage) and see if the disk is visible from one of the nodes (it should be visible from one node but not multiple nodes). If it is visible to
a node, continue to the next step. If it is not visible from any node, still in Disk Management on a node, right-click any volume, click Properties, and then click the Hardware tab. Click the listed disks or LUNs to see if all expected disks or LUNs appear.
If they do not, check cables, multi-path software, and the storage device, and correct any issues that are preventing one or more disks or LUNs from appearing. If this corrects the overall problem, skip all the remaining steps and procedures.
Review the event log for any events that indicate problems with the disk. If an event provides information about the disk signature expected by the cluster, save this information and skip to the last step in this procedure.
To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and
then click Continue.
In the Failover Cluster Management snap-in, if the cluster you want to manage is not displayed, in the console tree, right-click Failover Cluster Management, click Manage a Cluster, and then select or specify the cluster that
you want.
If the console tree is collapsed, expand the tree under the cluster you want to manage, and then click Storage.
In the center pane, find the disk resource whose configuration you want to check, and record the exact name of the resource for use in a later step.
Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type:
CLUSTER RESOURCE DiskResourceName /PRIV >path\filename.TXT
For DiskResourceName, type the name of the disk resource, and for path\filename, type a path and a new filename of your choosing.
Locate the file you created in the previous step and open it. For a master boot record (MBR) disk, look in the file for DiskSignature. For a GPT disk, look in the file for DiskIdGuid.
Use the software for your storage to determine whether the signature of the disk matches either the DiskSignature or DiskIdGuid for the disk resource. If it does not, use the following procedure to repair the disk configuration.
For more information please refer to following MS articles:
Event ID 1034 — Cluster Storage Functionality
http://technet.microsoft.com/en-us/library/cc756229(v=WS.10).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
Failover Cluster Quorum Disk is fallen off the shared volume
Hi, we had a Cluster that was holding 40+ VMs and was originally setup with the building 1GB Ethernet adapter, we yesterday installed Qlogic 10 GB NIC teaming for both of the nodes and reconfigured the network on both nodes. However now the Quorum disk
is not a part of Cluster Shared Volume How can I add that disk back to the shared volum please?Hi Riaz,
Add a quorum disk is easy so please let us know if there is any specific error occurs during the steps provided in following thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0566ede4-55bb-4694-a134-104fac2a7052/replace-quorum-disk-on-failover-cluster-on-different-lun?forum=winserverClustering
If you have any feedback on our support, please send to [email protected] -
A stranger is showing up under "Shared" in my network
A stranger is showing up under "Shared" in my network. "Frank's Macbook Pro." I don't know anyone named Frank and my internet connection (comcast) is secured. I looked under "preferences/sharing" and didn't find a way to "Frank's Macbook Pro" from showing up. Advice? I'm a newbie. Please explain simply. Amy
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 42;D23 14 2 48 43;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 40;D23 20 42 32 41;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
How to make folder view static on shared volume
I have an external drive connected to a Mac Mini (10.6.8). We use that external drive as our shared network drive. 4 Macs and 2 PCs access the drive. Please tell me how I can alter the ".DS_store" file on the SHARED VOLUME so that each user can expand disclosure triangles, etc. on the server volume, but each individual user isn't affected by how any particular user is viewing the folders. Right now, if User #1 expands a bunch of folders, all of the other users see that, too. I've done this before, using the Terminal. Alas, I've lost the directions for that. I believe it involved changing the permissions on the "DS_store" file on the server volume. Thanks in advance.
The following should work
cd /path/to/the/folder
chmod 444 .DS_Store
Repeat for each folder of interest.
If you have an entire directory tree, you could use something like
cd /path/to/the/top/folder
find . -iname .DS_Store -print0 | xargs -0 chmod 444
The 444 is read for owner, group, everyone else, and no write, and no execute permissions for the .DS_Store file. No write means no one should be able to change the contents of the .DS_Store file.
The find command will start at the current folder, then walk down the directory tree looking for all the .DS_Store files and pipe those files to xargs which will execute the chmod 444 command for each .DS_Store found.
Does this sound like what you did before? -
Why is iMac being dropped as a shared volume?
I have a 21.5" iMac 2.5GHz mid 2011, 12GB ram running Lion 10.7.4.
It is connected via ethernet to a gen 5 Airport Extreme, so Airport on the iMac is off. I am also running a MBP .
Both are on iCloud Back-to-My-Mac. When the iMac is awake, it shows up on the MBP as a shared volume. After it goes to sleep, it disappears as a shared volume. Wake for network activity is checked on the iMac.
I don't remember having this problem before. The only thing I have changed is that I had been using a 1st gen Airport Extreme and upgraded to this 5th gen.
I've checked everything I can think of but the problem persists.
Anyone have any thoughts as to why the iMac keeps disappearing?I figured it out- it must be the printer.
OK, here's another question. Ever since I installed Lion, Flash Player doesn't work at all. I've reinstalled it, de-installed it, changed settings, reinstalled again, numerous times. Nothing works. What am I doing wrong? -
Cluster Shared Volume is no longer accessible from cluster node
Hello,
We have a 3 nodes Hyper-v Cluster running Windows Server 2012. Recently we start having error below intermittently on a node, and the VMs running on this host and LUN will power off.
Alert: Cluster Shared Volume is no longer accessible from cluster node
Source: Cluster Service
Path: HV01.itl.local
Last modified by: System
Last modified time: 12/1/2013 12:27:18 AM
Alert description: Cluster Shared Volume 'Volume1' ('Cluster_Vol1_R6') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and network connectivity.
The only changes made recently is we installed VEEAM on test basis for DR replication. We switched off the Veeam server and stop the Veeam Services on the Hyper-V Hosts but we are still having same issue.
We are using an EMC SAN connected via FC as Shared storage and Powerpath as Multi-Pathing. No errors were found on the SAN.
I don't think the issue is related to the number of IO as we also experienced the issue at midnight during the week-end where no one was working.
Any help would be very much appreciated.
Thanks.
Irfan
Irfan Goolab SALES ENGINEER (Microsoft UC) MCP, MCSA, MCTS, MCITP, MCTHi,
Also, try to install the following recommend KBs.
Recommended hotfixes and updates for Windows Server 2012-based Failover Clusters
http://support.microsoft.com/kb/2784261
Also, there please confirm your VSS provider have the correct version.
The third party article:
VSS Provider with 2012 HyperV and CSV
https://community.emc.com/thread/170636
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Why is my iMac dropping off as shared volume- Back-to-My-Mac
I have a 21.5" iMac 2.5GHz mid 2011, 12GB ram running Lion 10.7.4.
It is connected via ethernet to a gen 5 Airport Extreme, so Airport on the iMac is off. I am also running a MBP .
Both are on iCloud Back-to-My-Mac. When the iMac is awake, it shows up on the MBP as a shared volume. After it goes to sleep, it disappears as a shared volume. Wake for network activity is checked on the iMac. Sometimes it takes a little bit of time, but it always drops off after it goes to sleep.
I don't remember having this problem before. The only thing I have changed is that I had been using a 1st gen Airport Extreme and upgraded to this 5th gen.
I've checked everything I can think of but the problem persists.
Anyone have any thoughts as to why the iMac keeps disappearing?I have a 21.5" iMac 2.5GHz mid 2011, 12GB ram running Lion 10.7.4.
It is connected via ethernet to a gen 5 Airport Extreme, so Airport on the iMac is off. I am also running a MBP .
Both are on iCloud Back-to-My-Mac. When the iMac is awake, it shows up on the MBP as a shared volume. After it goes to sleep, it disappears as a shared volume. Wake for network activity is checked on the iMac. Sometimes it takes a little bit of time, but it always drops off after it goes to sleep.
I don't remember having this problem before. The only thing I have changed is that I had been using a 1st gen Airport Extreme and upgraded to this 5th gen.
I've checked everything I can think of but the problem persists.
Anyone have any thoughts as to why the iMac keeps disappearing?
Maybe you are looking for
-
I have bought an itunes card from germany while my apple id is registerd in the uk, can i return the card to the apple store in germany and get my money back ?
-
Airport extreme making noise & wifi sync
I have an Airport Extreme and its making a noise like an electrical humm or buzz occasionally. Sounds a bit like a hard drive spinning. Anyone else heard of this? I also get issues with both iMacs I've owned where they are on the network, but the WiF
-
Some tracks missing, some tabs didn't become collections
Editing my recently migrated public site (straight public-to-public migration), I discovered that tracks were missing. Digging deeper, it's clear that tracks added to our old public site after mid-2010 didn't get published to the new public site. Als
-
Hiya. I came across this icon theme the other day, and I'd like to see it in the AUR so I won't have to download, remove, and replace the folder repeatedly. Thanks in advance!! :) Last edited by rainbowdashc (2013-11-14 03:59:16)
-
Wls1032_generic (64bit) jar file how i can install ?
operating system : windows 7 (64bit) oracle : 11gr2 (64bit) no java intstall any body can tell me how i can setup this jar file