Displaying Success/failurre messages in a struts landing page.

Hi,
I am selecting some values from a landing page, going to add/update page andthen submitting the data from add/update.
After that the control comes to the landing page and I am displaying the message " successfully edited" in the landing page.
Now the problem is if I come to landing page from any other page after this operation, the old message is still retained.
how to overcome this?
I am writing the messgaes to the session and retrieving it in the JSP page(Struts).
Thanks,
Dommu

domstom wrote:
Hi,
I am selecting some values from a landing page, going to add/update page andthen submitting the data from add/update.
After that the control comes to the landing page and I am displaying the message " successfully edited" in the landing page.
Now the problem is if I come to landing page from any other page after this operation, the old message is still retained.
how to overcome this?
I am writing the messgaes to the session and retrieving it in the JSP page(Struts).
Thanks,
DommuWell if i were you i'd have define and ActionError object and would have have added respective status message under respective action method and could have forwaded it to the respective landing View and render it accordingly using <html:errors/> tag.
or to put it in simple in struts 1.3 i'd have used the below methods.
[http://struts.apache.org/1.x/struts-core/apidocs/org/apache/struts/action/Action.html#addErrors(javax.servlet.http.HttpServletRequest,%20org.apache.struts.action.ActionMessages)]
[http://struts.apache.org/1.x/struts-core/apidocs/org/apache/struts/action/Action.html#addMessages(javax.servlet.http.HttpServletRequest,%20org.apache.struts.action.ActionMessages)]
And i'd advice you to go through Best Practices which we can follow at the time of Application Devolopment using struts-1.2 framework in front-controller tier.
[http://www.ibm.com/developerworks/web/library/wa-struts/]
Hope that might help :)
REGARDS,
RaHuL

Similar Messages

When starting FireFox, a message is displayed "script error" message related to Chrome - FireFox will not start regardless of the answer I select - how can I get FireFox to display so I can turn off all plug-ins? Safe Mode does the same thing.

This problem isn't on this system - but a system I support at our church.
When FireFox is started the first display is the message "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://tavgp/content/libs/include.js:1101". There are two option buttons - Continue and Stop Script. Selecting either button closes that window - BUT the FireFox window is never displayed.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display success message after Remote service call

Hi ,
I am currently using Flex form for adding/updating user
personal details.On submit button click ,i am submitting details to
server by calling RPC remote service.For calling remote service i
am using penneframework. On penneframework, Remote service call
result are populated in RemoteResult object. It dont have any other
event method for handling result event.For errror handling, i have
defaultHandler for displaying error message.
Here i am having two requirements
1. I should be able to track RPC response, so that i can
display success message to user along with DB generated ID.
2. I need to reset all form field after receiving RPC
response.
Here my question is
1.How i can track server response, so that i can display
success or error message.
2. Is their any event or coding technique which i can use for
solving this issue.
Thanks
Kumar

you can do following way :
quote:
var token:AsyncToken =
YourRemoteClass.remoteMethod(param1,param2);
token.addResponder(new AsyncResponder(
function(data:Object, token:Object):void {
// tadaaa response
function(info:Object, token:Object):void {
//ooooo , noo, failure
token

Display Success Message in Web Service

Hi All,
I Have created web service for function module, when executing web service in navigator its working fine. Here Exception message display in output but success message not display. Success message working in Function Module but not display in Web service. How to display success message in web searvice.
Code used for success message in Function Module:
Message S001(ZMSG).
Thanks,
Chandra

Hello,
Dont think you can use custom message classes in RFC's. Try using a generic message and check if the message is being populated.
Vikranth

Display success message in same page when submit button is clicked

I have a jsp page, where i use a form to submit data into my database.when submit button is clicked, i am able to display "Data entered Successfully" in a different page. But i want to display the message in the same jsp page.
what do i do?
PS :- i have tried a javascript message box, but that is not working properly. I need this solved urgently.
Thanks

Hi Deeptha,
What is APEX version your using and is it your select list with submit option ?
Regards,
Ajay Periwal

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

To display value in html: textarea in struts

Hello,
I want to display value in <html:textarea> in struts application from my userdefine FormBean.
i tried like this
<html:textarea property="documentNumberList" value='"<bean:write name="QualityForm" property="displayDocumentNumber">" ></html:textarea>
I am not getting success.
I would be appriciate to you if anyone could let me know what is the solution of this problem ? or send me one example.
Thanks
Rajnish
[email protected]

Hi,
That did'nt solve my problem. Actually i am trying to get the arraylist data one by one into different textareas. There are two arrays one is quesArray and the other quesIdArray. I need the quesIdArray in the individual text areas.How can i achieve this?
I am using the following code to do that.
<logic:iterate id="item" name="selectionCriteriaForm" indexId="index" property="quesArray">
<tr><td><li><em><b><bean:write name="item"/> </em></li></b></td>
<td><html:textarea property="quesIdArray" cols="50" rows="2" name="selectionCriteriaForm" onkeyup="limitTextarea(answer<%=i %>,5,50)" />
<br></td></tr>
<% i=i+1;
%></td></tr>
</logic:iterate>
Pls help me on this.
Thanx in advance.

How to display only one message in WD

Hi all,
I want to display successful message or error message when certain action is perform.
I have my message enter in the MessagePool, say Request_Successful_Updated and value is "your request is successfully updated"
In my WD, I do this:
IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
IWDTextAccessor textAccessor = wdComponentAPI.getTextAccessor();
msgMgr.reportSuccess(textAccessor.getText(IMessage<my class>.Request__Successful__Update));
The error message appear three times in the top view, right side view and the bottom of the view.
How to just displayed one error message on just on side of the view?

Hi
Define a success message or Error message in the pool.
Use the following statement
wdComponentAPI.getMessageManager().reportMessage(IMessage<Comp_Name>.<MessageKey>,
null,false);
Define message areas View element in your View and place it where you want to display the error message.
May be this helps you.
Regards
Kalyan

How to display an error message on screen?

Hi experts,
In screen painter, how to display an error message in the message area just below the screen?
Thanks!

hi wuyia,.
Write like this;
Message 'Process completed Successfuly' TYPE 'S'.
Message 'Want to Overwrite Value' TYPE 'W'.
Message 'Press enter to continue' TYPE 'I'.
Message 'Invalid Input' TYPE 'E'.
S - Success
W - Warning
I - Information
E - Error
You can adjust your GUI option to display the message in a Popup or in the status bar.
Regards
Karthik D

Not able to display javascript alert message from within a pl/sql block

Hello,
Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
begin
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
and I have made this code to be executed conditionally when request = Expression1
Expression1: SUBMIT
The thing is I am not able to display an alert message when the update button is clicked.
Can anyone please help me with this one.
Thanks,
Orton

varad but I also have an update statement within that block for the update button something like this i want to achieve.
begin
if :P1_ITEM IS NULL THEN
update sample_tbl
set col1 =:APP_USER,
col2 = 'Y'
where pk_col = ---;
commit;
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Successfully assigned an item!'');');
HTP.p ('</script>');
end if;
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
thanks,
Orton

Javascript to Display message and return to home page

Hi
I have a requirement to display an acknowledgement message after a button has been pressed and return to home page.
I created some JS and tested on a standalone button.
<script type="text/javascript">
function GoToHome_ack()
alert("Authorisation Created!");
// goto to page 1
location.href = "f?p=&APP_ID.:1:&SESSION.";
</script>
Now the problem is I need to call this code after I have successfully executed 2 Processes conditionally on a Create Authorisation Button
The only logical place I tried to place the call was on the conditional Branch URL, because I need the Processes to execute first.
javascript:GoToHome_ack();
Unfortunately this failed
Anybody any suggestions ??
Regards
Ade

Hi,
Quickly what come my mind is that create blank page and place to HTML header
<script type="text/javascript">
alert("Authorisation Created!");
// goto to page 1
location.href = "f?p=&APP_ID.:1:&SESSION.";
</script>Then branch to that page instead javascript:GoToHome_ack();
br, Jari

Displaying Friendly Maintenance Message

Dear All
When we are carrying out maintenance on our SharePoint site, I would like to display a friendly message to our users to tell them that maintenance is underway.
I have read lots of articles about using app_offline.htm but this will not work for us because I (and my team of 2 others) need to still be able to use our SharePoint site. For example, I might be making significant changes to the structure of our SharePoint
sites and changing lots of hyperlinks in the menus, during which time I do not want our users to be able to access the site. They should land on the friendly maintenance message but I need to be able to continue accessing SharePoint.
The app_offline.htm completely shuts down the application which is not what I am looking for here. Please could someone help me figure a way to display a friendly maintenance message whilst the site is still usable for administrators or users of a certain
group? I can't find a way around it.
Many thanks for your help
Daniel

Dear Ram
Thank you for your advice, much appreciated. Would that work for short periods of maintenance, let's say if I wanted to take the site down for 15 minutes whilst I work on something?
I don't have a good understanding of DNS but I thought that it has to propagate around the WWW. I wouldn't want any changes to the DSN to cause longer lasting access issues. Will things work straight away as soon as I change the DNS back?
Thanks
Dan

Display an Alert message in PL/SQL block in APEX

Hi,
we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
we tried doing this with below code:
Begin
INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
exception when others then
htp.p('<script language="javascript">');
htp.p('alert("Exception");');
htp.p('</script>');
end;
If anybody knows .... please reply.
Thanks,
Subarna
Edited by: user9955252 on Apr 21, 2010 1:47 AM

Hello,
APEX Forum is here : Oracle Application Express (APEX)
Regards

How displaying an alert message called from a database procedure

Hi,
How can I display an alert message that is called from a database procedure.
I've tried the following code:
l_al_button NUMBER;
l_al_message VARCHAR2(80);
l_al_id ALERT;
Set_Alert_Property(l_al_id, alert_message_text,l_al_message);
l_al_Button := show_alert(l_al_id);
When trying I receive an error that says that the word ALERT need to be declared.
Any suggestions?
Thanks

Hi,
leave the procedure without error handling.
This is what you can do:
1.Inside the database procedure-
BEGIN
RAISE_APPLICATION_ERROR (-20001, 'The chosen length of the Public Key Exponent ....');
END;
2.Into your Form -
BEGIN
EXCEPTION
WHEN OTHERS THEN
IF sqlcode = '-20001' THEN
Display Your Messages.
END IF;
Monica
END;

Displaying Success/failurre messages in a struts landing page.

Similar Messages

Maybe you are looking for