Displaying the criteria in Answers

Hi,
I have a requirement to show the link of a report in the dashboard page and when the link is clicked it should show the criteria page of the report so some users can modify the report. Currently when I do it it shows me the results, if I use a filter that is not there it shows the error message. How can I display the criteria in Answers without displaying the results.
Please Help. Thank you.

Try this:
1) Go to the criteria mode of the Answers request.
2) Copy the URL in the address bar.
3) Go to your dashboard page and add a "Link or Image" object.
4) Paste the URL there.
When the user clicks on the link, it will open in criteria mode, assuming the user has access to Answers.
(Don't forget to mark "helpful" or "correct" to this post and then close the thread. Thanks.)

Similar Messages

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Displaying selection criteria in ALV report output

Hello,
Ive been using REUSE_ALV_GRID_DISPLAY function module to display my report content in ALV.
My reports selection criteria has parameters, select options, checkboxes and radio buttons. As part of the ALV output, I want to display the criteria that the user had selected in the selection screen. I was hoping to do that via parameter "i_callback_top_of_page" and fill the selection criteria in the header area. I'm using REUSE_ALV_COMMENTARY_WRITE to fill the header area.
However, the header area takes too much of view space in the output if I put all the selection screen information in it.
Is there a way to make the header area scrollable? What is a good way of displaying the selection criteria information as part of the report output?
Appreciate your help.
ss

Hi SS,
1. The purpose of displaying / writring
   selection information
   in alv is
   for identifying what the user has seleccted,
   directly from the report (when its printed)
2. So, the option of priting/writing
   it on the TOP of alv, is ok.
3. However, U can also choose to WRITE
it at the BOTTOM (instead of top)
4. Try to utilise maximum spacing (horizontally)
   field1 : abcd      fidl2 = xyz field3 = ppp
   field4 : mnc       etc.         etc.
regards,
amit m.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

How to display the data according to the search criteria

Hi ,
I want to display the order data in my application.
I have certain search criteria in my application like
ordernumber , date etc.
If I click the submit button without giving any criteria , all the data is getting displayed properly in the table.
But,If I want to display the data according to the order number, all the orders present are getting displayed , but actually it should display the order only for that particular order number.
The code is like : onActionSearch()
wdThis.wdComponentController().executeGetlist_Input();
Can any one tell me how to display the orders depending upon the search criteria.
Ideas & suggestions are truely welcome.
Thanks & Regards
Neha Mahanty

Hi Neha,
Design ur RFC in such a way that it should display the result according to your search criteria.
If you are making a search on "Order Number" pass some input(search criteria along with some parameter, if order number is not null then pass "X" as parameter) to RFC so that it will return the result accordingly. And same with date also.
Thanks n Regards,
Jhansi Miryala

OBIEE Answers does not display the result set of a report query

Hi,
We have a pivot table type of report in Oracle Business Intelligence Enterprise Edition v.10.1.3.3.2 Answers that has the following characteristics:
     3 Pages
     3 Sections , 4 Columns
     18363 Rows in the result set
As per the NQQuery.log, the query for this report executes successfully resulting in 18363 rows. However, nothing comes up in the display on Answers. Moreover, no error is reported. The instanceconfig.xml file has the following setting:
<PivotView>
     <CubeMaxRecords>30000</CubeMaxRecords>
     <CubeMaxPopulatedCells>300000</CubeMaxPopulatedCells>
</PivotView>
Even with these settings, Answers just returns a blank page - nothing is displayed in the name of the result set of the report query. Has anyone encountered this problem scenario before?
Any help is much appreciated.
Thanks,
Piyush

Hi Fiston / Pradeep,
Thanks for your inputs. A few points to note:
-> I am actually not getting any error message in answers or the NQQuery log. Moreover I am not getting any errors related to "query governor limit exceeding in cube generation" also.
-> I have other pivot table type of reports in the same repository that work fine. In fact the report which has this issue even works sometimes - what actually is happening is that if I alter the number of sections from 3 to 4, then the result set changes from 14755 Rows to 18363 Rows and as per the NQQuery.log in both cases the query completes successfully. However, when the result set has 14755 rows, I get to see the output in Answers; however when the result set is 18636 rows, the Answers screen just goes blank and does not show any output or error. This makes me believe that there is some parameter in instanceconfig or the NQSconfig file - I have tried a lot of changes but nothing works !
Any help is much appreciated.
Best Regards,
Piyush

How to display the descriptions of a "question" and "answers" in the LMS?

Hello, evevyone,
I am new comer in Captivate 5.
In order to analysis the result of "Learner response", we need known the “Question” and “Answer” description of each Quiz in a SCORM player.
Does Captivate return these information back to LMS?
For example :
I have created a quiz with one question.
Do you have a dog? ------->Question description
(A)Yes ----->Learner response
(B)No
After complete the quiz on LMS, Captivate will return the "Do you have a dog?" and "(A)Yes" back to LMS ?

Dear RodWard,
I am trying anohter LMS named SCORM Cloud.
The question description does not return to LMS.
You can see the Message Log:
cmi.interactions.3
cmi.interactions.3.id: 1272
cmi.interactions.3.type: LongFillIn
cmi.interactions.3.timestamp: 2011-09-29T21:01:43
cmi.interactions.3.correct_responses.0.pattern: aa
cmi.interactions.3.weighting: 10
cmi.interactions.3.learner_response: aa
cmi.interactions.3.result: correct
cmi.interactions.3.latency: 0000:00:02
cmi.interactions.3.description: <--------------No description
I am sure that Captivate will not return the question description.....
Am I right?

Oracle states go to OTN for this:If the criteria isn't met I don't want for

Can you easily recover from, bypass or work around the problem? = YES
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Did it work before? If yes, what have you changed? ###
No, We were told this was fixed with 10G so we upgraded to 10G. We have a
report and we want it to execute if it's less than 10 records if not we want a
message to come up that the report needs to be scheduled.
Well we run the report and it displays exceeded record count but the format
still runs so no time saved on the web.
If the record count was exceeded we want to HALT the system and not go any
farther.
Now if we could modify the system message 1825 we would be o.k. But we don't
know if that is going to work. If we could change the message we would be
o.k. with that. that would mean changing the system codes though.
### How is the Report being called (Command line, URL or via Oracle Forms): ###
If false comes back in the beginning then we don't want any report formatting
to be done. Right now the format is done it seems but no data is displayed
because criteria isn't met.
So we dont wnat the formatting to be run when criteria isn't met. But for
some
reason it still runs and takes time.
See we have some reports on the web that can only be ran by date range right
now the clients can only run the reports for a 6 months range.. Well some
clients have a lot smaller record count. So we want to change the way the
reports are ran to a records count. If the count is large than said amount
then a message comes up that states the report has to be scheduled. If the
amount is under said amount then the report runs.
So at this time in the report we do a count then we move onto will the report
run or not if over the amount we want to abort the process but we don't want
the client to see the abort. We definately don't want the client to sit and
wait for the format to run when NO Data is to be returned.
### Error messages and error scenario: ###
So what we want is too see a message "Schedule the report count exceeded" and
NO formatting done. If under amount we want the report to run.
### Provide a detailed step-by-step description of your problem or question: ###
Or is there a way to customize the messages the client / users will see. And
no formatting time for no records returned.
Contact me via : E-mail -> [email protected]
Text continued in next action...
20-SEP-04 18:39:53 GMT
Text continued from previous action...
20-SEP-04 19:18:51 GMT
New info : Is there a way if the error messages have to come up that we can
hide the message or have another screen cover that error message something to
cover the message so that the user doesn't see the error message.
20-SEP-04 19:30:23 GMT
Hi Darlene,
Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
ill update the SR / call you as soon as we have relevant information. Thank you
for your patience.
Best Regards,
Seema,
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
20-SEP-04 19:30:30 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 00:32:18 GMT
Hi Darlene!
If you are calling the report from a form, try using the EXIT_FORM line in your code.
Thanks and Regards,
Seema
21-SEP-04 00:33:01 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 14:09:20 GMT
New info : We will try it and let you know.
21-SEP-04 14:19:04 GMT
New info : We are not calling the report from a form so this won't work. Any
other way. We are needing to do this badly.
21-SEP-04 14:39:06 GMT
New info : Can I get detailed steps about how to customize the system message
or hide the message when we abort the report?
21-SEP-04 15:38:39 GMT
Hi Darlene!!
As talked to you on phone, here are the steps for you to try.
The below has been run as a test case using emp table in scott schema of a database
1) create a summary coloumn say cs_1 in the data model.
2) point the function to count.
3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
scott schema)
4) create a user parameter say NO_ROWS
5) in its property palette make its data type number and initial value as 1
6) I had teh following query for my report:
select empno, ename from emp
where rownum <= :no_rows
This means that the report that will be generated will consist of a total no of NO_ROWS(that we
shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
message.
7) create a before report trigger as:
function BeforeReport return boolean is
user_excp EXCEPTION;
begin
if :cs_1 >5 then
raise user_excp;
return (false);
else
return true;
end if;
EXCEPTION
WHEN user_excp then
SRW.MESSAGE(30, 'Data is more please schedule this report:');
raise SRW.PROGRAM_ABORT;
return (false);
end;
This way when u run a report, an argument is asked whether how many rows do you want to be
displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
more please schedule this report:"
In case you do not want to specify NO_ROWS..then you need not put that and modify the report
query as "select empno, empname from emp;" i.e. without where clause.
21-SEP-04 16:49:30 GMT
New info : we will try this then update the TAR.
21-SEP-04 16:58:09 GMT
ok you update the tar when you try the above steps.
STATUS:
@CUS
23-SEP-04 02:16:00 GMT
New info : Information from the person that did this suggestion step by step.
I tried this step by step, but unfortunately, it doesn't work the way we want.
First with this suggestion, the user needs to choose how many records they
want
to get, or we default a number of records, in order to run the report. The most
important thing is, whenever you specify the statement return false or raise
SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
I really hope that people from Oracle would let us know how to customize the
system message or hide it.
23-SEP-04 14:23:04 GMT
New info : I just thought that we have some sort of message, which I guess is
from the database, when we do claim search on client inquiry. I am just
wondering if we could try the same thing to the report.
The some sort of message looks like this on dev box:
Your search exceeded 5000 records and will surpass the capabilities of this
connection. Please narrow the search criteria and resubmit.
It's just a thought, not sure if it's going to work.
When could we have the DBA Make this change. The servlet.properties???
23-SEP-04 17:30:55 GMT
REQUESTED INFORMATION PROVIDED
===============================
Hi Darlene,
Thank you for providing the requested information. I am currently reviewing/resea
rching the situation and will update the TAR / call you as soon as I have additi
onal information. Thank you for your patience.
Best regards,
Ajit
STATUS
=======
@WIP -- Work In Progress
23-SEP-04 18:04:31 GMT
UPDATE
=======
Hi Darlene,
We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
due to the raise srw.program_abort command, which is the element through which
we can abort the program.
Thanks
Best Regards
Ajit
@CUS
23-SEP-04 18:29:26 GMT
New info : Can you please look into a way that we can get something to work?
23-SEP-04 18:49:28 GMT
Hi Darlene,
I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
nternally. Still if you wish you may refer to the otn discussion forum which is
maintained by teh product management group and post a new thread on it. the link
to the forum is Reports
Also since nothing can be done on our side I don't see any reason to keep this TAR open an
d if you wish we can soft close this.
Thanks
Regards
Ajit.
23-SEP-04 13:13:10 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
New info : Shouldn't there always be a way to do something? I don't understand
why we were told in 10G that this could be done and now we are told it can't.

You can tell Thunderbird to remember your password.
''... they took me off their list because they kept receiving error messages when they sent me a message.''
What is the exact error message?

After Delete in Linked list...unable to display the linked list

Hi...i know that there is an implementation of the class Linked Link but i am required to show how the linked list works in this case for my project...please help...
Yes..I tried to delete some objects in a linked list but after that i am not able to display the objects that were already in the linked list properly and instead it throws an NullPointerException.
Below shows the relevant coding for deleting and listing the linked list...
public Node remove(Comparator comparer) throws Exception {
     boolean found = false;
     Node prevnode = head;          //the node before the nextnode
     Node deletedNode = null;     //node deleted...
     //get next node and apply removal criteria
     for(Node nextnode = head.getNextNode(); nextnode != null; nextnode = nextnode.getNextNode()) {
          if(comparer.equals(nextnode)) {
               found = true;
               //remove the next node from the list and return it
               prevnode.setNextNode(nextnode.getNextNode());
               nextnode.setNextNode(null);
               deletedNode = nextnode;
               count = count - 1;
               break;
     if (found) return deletedNode;
     else throw new Exception ("Not found !!!");
public Object[] list() {
     //code to gather information into object array
     Node node;
     Object[] nodes = new Object[count];
     node = head.getNextNode();
     for (int i=0; i<count; i++) {
          nodes[i] = node.getInformation(); // this is the line that cause runtime error after deleting...but before deleting, it works without problem.
          node = node.getNextNode();
     return nodes;
}Please help me in figuring out what went wrong with that line...so far i really can't see any problem with it but it still throws a NullPointerException
Thanks

OK -- I've had a cup and my systems are coming back on line...
The problem looks to be the way that you are handling the pointer to the previous node in your deletion code. Essentially, that is not getting incremented along with the nextNode -- it is always pointing to head. So when you find the node to delete then the line
   prevnode.setNextNode(nextnode.getNextNode());will set the nextNode for head to be null in certain situations (like if you are removing the tail, for instance).
Then when you try to print out the list, the first call you make is
node = head.getNextNode();Which has been set to null, so you get an NPE when you try to access the information.
Nothing like my favorite alkaloid to help things along on a Monday morning...
- N

To display the icon on the report output

hi friends good afternoon!
iam devloping a report which need to display the icon on the output.
when i press the icon some action will be performed,
this is my requirment plz help.

Hi,
First declare INCLUDE ICON in the program Code.
Then you can write the different Icons:
declare a single char field.
move the icons into that and display.
sample code:
form select_icons.
data: w_disp_tab like zpickdisp,
        w_disp_head like zpickhead,
        w_color like zpickdisp-color,
        ov_icon like zpickdisp-ov_icon,
        gi_icon like zpickdisp-gi_icon,
        to_icon like zpickdisp-to_icon,
        lp_icon like zpickdisp-lp_icon,
        pc_icon like zpickdisp-pc_icon,
        lv_icon like zpickdisp-lv_icon,
        vm_icon like zpickdisp-vm_icon,
        em_icon like zpickdisp-em_icon,
        t_ovst_tab like t_disp_tab with header line.
constants: c_col1(3) value 'C10',
             c_col2(3) value 'C20'.
sort t_data_tab by lgtor vbeln.
w_color = c_col2.
loop at t_data_tab.
    at new lgtor.
    fill ALV header table
      clear w_disp_head.
      w_disp_head-lgtor = t_data_tab-lgtor.
      append w_disp_head to t_disp_head.
    endat.
goods issue status & overall amber/green only
    case t_data_tab-wbstk.
      when c_c.
        move icon_green_light to gi_icon.
        move icon_green_light to ov_icon.
      when others.
        move icon_red_light to gi_icon.
        move icon_yellow_light to ov_icon.
    endcase.
transfer order status
    case t_data_tab-lvsta.
      when c_a.
        move icon_red_light to to_icon.
      when c_b.
        move icon_yellow_light to to_icon.
      when c_c.
        move icon_green_light to to_icon.
      when space.
      write N/A
        to_icon = 'N/A'.
    endcase.
loaded to pallet status
    if not t_data_tab-zpallet_no is initial.
      move icon_green_light to lp_icon.
    else.
      move icon_red_light to lp_icon.
    endif.
pallet count status
    if not t_data_tab-zcount_check is initial.
      move icon_green_light to pc_icon.
    else.
      move icon_red_light to pc_icon.
    endif.
loaded to van status
    if not t_data_tab-zvan_no is initial.
      move icon_green_light to lv_icon.
    else.
      move icon_red_light to lv_icon.
    endif.
van manifest status
    if not t_data_tab-zvan_print is initial.
      move icon_green_light to vm_icon.
    else.
      move icon_red_light to vm_icon.
    endif.
end of day manifest status
    if not t_data_tab-zeod_print is initial.
      move icon_green_light to em_icon.
    else.
      move icon_red_light to em_icon.
    endif.
move working data table to display table
    move-corresponding t_data_tab to w_disp_tab.
    w_disp_tab-ov_icon = ov_icon.
    w_disp_tab-gi_icon = gi_icon.
    w_disp_tab-to_icon = to_icon.
    w_disp_tab-lp_icon = lp_icon.
    w_disp_tab-pc_icon = pc_icon.
    w_disp_tab-lv_icon = lv_icon.
    w_disp_tab-vm_icon = vm_icon.
    w_disp_tab-em_icon = em_icon.
    w_disp_tab-color = w_color.
fill N/A values for initial fields for display
    if w_disp_tab-packvorschr is initial.
      w_disp_tab-packvorschr = 'N/A'.
    endif.
    if w_disp_tab-exidv is initial.
      w_disp_tab-exidv = 'N/A'.
    endif.
    if w_disp_tab-zpallet_no is initial.
      write 'N/A' to w_disp_tab-zpallet_no.
    endif.
    if w_disp_tab-zvan_no is initial.
      write 'N/A' to w_disp_tab-zvan_no.
    endif.
display different color for new doc number
    at end of vbeln.
      if w_color = c_col1.
        w_color = c_col2.
      elseif w_color = c_col2.
        w_color = c_col1.
      endif.
    endat.
    append w_disp_tab to t_disp_tab.
    clear w_disp_tab.
endloop.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
data: ov_stat_red(1).
clear w_disp_tab.
sort t_disp_tab by vbeln.
loop at t_disp_tab into w_disp_tab.
    at new vbeln.
    check all line items for delivery
      loop at t_data_tab where vbeln = w_disp_tab-vbeln.
        if t_data_tab-lvsta = c_a.
        set overall status to red
          ov_stat_red = c_yes.
          exit.
        else.
        leave green/amber status icon as previosly determined
        endif.
      endloop.
      if ov_stat_red = c_yes.
      set overall status to red for all items in that delivery
        clear ov_stat_red.
        move icon_red_light to w_disp_tab-ov_icon.
        modify t_disp_tab from w_disp_tab transporting ov_icon
                          where vbeln = w_disp_tab-vbeln.
      endif.
    endat.
endloop.
endform.                    " select_icons
Regards,
Anji

Shipping date information is shown on some devices, while not shown on others. What is the criteria?

Hello all,
Thanks again for taking the time to read this. I have a customer who considers the shipping date very important in their operations. Our HTOM was taking a look at the reports from the IR portal, and informed me that some devices showed the shipping date, while others did not.
It seems that 'fixed switches' seemed to show this information while 'chassis' did not. What is the criteria that is used to display this information?
Thanks,
John

Hello John,
I think your request may need some technical analysis. I would suggest, please open Service Request (SR) and provide the details of the devices having an issue and report details too, so that technical support team can check availability of requested data in upstream systems.
Per their analysis, they will update you thru SR.
Thanks in advance for accepting SR approach for this request.
Thanks & Regards,
Jaswant

Deleting a column messes up the Criteria temporarily

This is an odd behavior that I'm only noticing in my custom subject area. I can't reproduce the error in Sample Sales or in any other Oracle subject area.
On the Criteria tab, I'm selecting Region, Product Group, Product Group, Sales, and Cost. The key here is that two of the columns are the same, and are sitting side-by-side.
If I delete either one of the two Product Group columns, the columns now appear (visually) to be Region, Sales, Sales, and Cost -- both Product Group columns are gone, one is replaced by a second instance of Sales. In fact, if I edit the formula for the first Sales column, sure enough it is referring to the Sales column.
But at that point, if I click Results I actually see what I wanted to see: Region, Product Group, Sales, Cost. And if I return to the Criteria tab, that's what I see as well.
As I said, I can't reproduce this behavior in Sample Sales. But I can reproduce it with ANY columns in my subject area. As long as I select the same column twice then delete one of them, the column immediately to the right "appears" to get duplicated, but in reality it doesn't.
Here is the original XML:
<saw:report xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlVersion="201201160" xmlns:sawx="com.siebel.analytics.web/expression/v1.1">
<saw:criteria xsi:type="saw:simpleCriteria" subjectArea=""Retrospectives"">
<saw:columns>
<saw:column xsi:type="saw:regularColumn" columnID="c8cf476e13734e244">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Geographies"."Region"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c4b21c8ba75079792">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Products"."Product Group"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c52a38df0c1e8d6fa">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Products"."Product Group"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c895407b5b0ef913f">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Facts"."Sales"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="cd93912a016bc6d64">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Facts"."Cost"</sawx:expr></saw:columnFormula></saw:column></saw:columns></saw:criteria>
<saw:views/></saw:report>
When I remove one of the duplicate columns and check the XML, it looks like this:
<saw:report xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlVersion="201201160" xmlns:sawx="com.siebel.analytics.web/expression/v1.1">
<saw:criteria xsi:type="saw:simpleCriteria" subjectArea=""Retrospectives"">
<saw:columns>
<saw:column xsi:type="saw:regularColumn" columnID="c8cf476e13734e244">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Geographies"."Region"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c4b21c8ba75079792">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Products"."Product Group"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c895407b5b0ef913f">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Facts"."Sales"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="cd93912a016bc6d64">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Facts"."Cost"</sawx:expr></saw:columnFormula></saw:column></saw:columns></saw:criteria>
<saw:views/></saw:report>
So the XML still looks right, and the display on the Criteria tab and the XML are not in sync with each other. In fact, if I toggle to the Advanced tab and back to Critieria, it's fixed - the Criteria tab is now showing correctly.
Any thoughts?

This seems to fix it.
gridItem = new GridItem();
gridItem.setStyle("borderStyle", "solid");
gridItem.colSpan = 2;
dynamicText = new Text();
dynamicText.percentWidth = 100;
dynamicText.text = "A";
gridItem.addChild(dynamicText);
gridRow.addChild(gridItem);

Creation of logic group - any limitation for the Criteria Value Field?

I am trying to create simple logic groups in FDM (version 11.1.1.3 and 11.1.2.1). However, an error message displayed in the information bar.
Error: Error adding new record.
Detail: Data access error.
I clicked the "Add" button and created a logic group which contains *1,520* non-sequential source accounts in the Criteria Value Field (with In operator).
I have separated these source accounts with a comma and no spaces in between them. (Note: Operator = x, Value/Exp = 1, Seq = 0) I updated the grid. Then, the error message was displayed and the logic group creation was failed.
And then, I created a new logic group which contains only *100* non-sequential source accounts in the Criteria Value Field (with In operator).
I also separated them with a comma, no spaces and same setting. I updated the grid. And the logic group was added successfully.
Each source account contains 10 characters (alphabet and/or number).
I want to ask:
1. Is there any limitation in specifying source accounts (i.e.. no more than certain number of source accounts for each logic group) in the Criteria Value Field when creating simple logic group?
2. I am adding these logic groups by clicking the "Add" button one by one, is there faster way to do it (i.e.. upload an excel or csv file or source accounts specified)?
Thank you very much!

Thank you Expert for your reply!
I would like to ask about loading the Logic Accounts with the template.
As instructed, I exported the excel out for the template format and updated the template with new Logic Accounts. Then, I imported the excel file in the "Import XLS" section under Tools. The excel file was uploaded successfully. (Note: I am using excel 2010 and saved it as .xls file)
However, there is no changes in the Logic Accounts and seem no updates was made.
I want to ask:
1. Did I import the excel at the right location (i.e. "Import XLS" section under Tools)?
2. Is there anything else I need to do after the file has been imported (i.e. delete the existing logic accounts or click another button(?) for this change) so the new list of logic accounts would become effective?
I would like to use excel to maintain my list of logic accounts for better control in the future.
Thanks in advance!

To RE-USE (display) the common REGION in all of the Pages

I have a Common REGION (It's a Select criteria with lot of lov's) and I want to display the same Region with every items on the TOP of all the Pages (1,2,3, .....) within same Application ID.
One of the way is I should copy the REGION in all the pages but I want some better way, so that I can build the Region once and re-use that in every Page without copying.
thanks..

thaks..
also if I want to avoid some of the pages..how can I do that.
I mean, I have page 1,2,3,4 & 5. I want the common region to be displayed only on Page 1,3 & 5, Can I give the condition in Page 0 to display on particular pages.

Display the Word or html doc which is stored as blob intable and SearchApplication

Hi All,
I have two doubts and are as follows....
1)Created a table name
create table documents(id number,doc blob);
I created a form based on the above table. I have two text boxes on the form, one is to enter the id and the other one is upload the document. The default button are insert,query,update,reset ....
I inserted a word document into the table with id = 1. when i query the table with the id=1. the word document is not displayed whereas when i insert a .bmp file i am able to see the image when i query.
How can i display the word document when i query the table. Please give me suggestion to do it.
what is the method to do it...If at all if the document(blob) is a HTMl document..How can i display...
2) I have to create a search application...
A text Box: To enter a word
Serch Button: On click, it should search the documents in the documents Table(as mentioned above)
And should display the list of documents that matches the criteria.....On click of a result item(link) the doc or html should be displayed....
Thanks in Advance...
Sreedhar

Oliver -
TestStand does not have any hooks to allow a test system developer to override the internal searching for a file on disk. The only simple option that I see is to to query the database and download the latest sequences ahead of time. This is similar to a Source Code Control mechanism. Keep in mind that once an execution loads a sequence file, the file is typically not released until the last execution completes so you cannot load an updated copy of the sequence file while executing, especially the client sequence file.
Scott Richardson
National Instruments

Displaying the criteria in Answers

Similar Messages

Maybe you are looking for