Distance command under BGP process

Hi,
Can someone explain me how does the command
"distance 200 10.0.0.1 0.0.0.0 DEFAULT" under a BGP process executes.
On this router default route is learnt through ospf .
10.0.0.1 is BGP neighbor ip address
DEFAULT is standard access-list with permit 0.0.0.0 statement.
==========================================================
The ospf default route is preferred over the default route of BGP neighbor in this scnario.
However i want to know how this command executes.
Thanks

If you receive that route via eBGP (AD 20) the router will change to 200 if it learned via neighbour 10.0.0.1 giving preference to OSPF AD 120. Resuming the RIB will have the OSPF route

Similar Messages

RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESSING

hi.
just i want to know what is the purpose of run operating system command before message processing,after message processing under file sender adapter.
waiting for your great answer.
bye.
regards.
seeta ram.

Hello Seeta,
let me see if I give it using a simple scenario that I implamented : i nedd to transfer a very large file from one server to the other by XI.
to save space and network traffic I use an OS command before picking up the file to run a zip command to zip the file.
after I transfer the file to the target server I run another OS command after the transfer to unzip the file.
now to your second question:
the before Os command on the target server is used mostly for checks (make sure there isn't a file by that name or backing up existing data)
and the after sender OS command is usualy for backing up or erasing existing files (cause it is done only after the first part was finished succesfully).
Uri Lifshitz.
p.s.
there was a blog obout this titled "XI as a huge file mover"
and you can see a description and my scripts at https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/03/additionaltipsforusingXIasahugefiletransfer%28withbatchscripts%29&

Error under "manage process"

Hello,
when i try to see all instances of a bpm process under "manage process" in the administration workbench i get following error message:
Error occured while processing the request. Log entries are created with ID: (No log entries created due to the log level set)
Error occured while processing the request. Log entries are created with ID: 0015F24B71A20564000000070000151C
This is the log entrie
Message:     class com.sap.glx.text.TextStoreException
Date:     2009-10-20
Time:     15:48:11:218
Category:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
Location:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
Application:     sap.com/tclmitsamuimainframe~wd
Thread:     Thread[HTTP Worker [@31641945],5,Dedicated_Application_Thread]
Data Source:     j2ee\cluster\server0\log\defaultTrace_00.trc
Arguments:
DSR Transaction:     3037c0b0bd7f11de953b0015f24b71a2
Message Code:
Session:     1314
Transaction:
User:     admin
Time Zone:     +0200
CSN Component:     BC-BMT-BPM-SRV
DC Component:     sap.com/com.sap.glx.nwa.core.app
Correlation ID:     3551350000000004
DSR Root Context ID:     28C92260BD7F11DEA5200015F24B71A2
DSR Connection:     3037c0b0bd7f11de953b0015f24b71a2
DSR Counter:     0
Log ID:     0015F24B71A20564000000070000151C
Host:     MSGP558P
System:     CE1
Instance:     J00
Node:     server0
Edited by: tw18399 on Oct 20, 2009 3:55 PM

Sorry, but there is no possibilty to drill down in this entry. But before this error message , there a view other errors:
Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
And:
selectAsList(), CommandProcessorException,
[EXCEPTION]
Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
and:
executeCommand(), exception occured at execution,
[EXCEPTION]
and:
Additional error in after execution of command processor!
[EXCEPTION]
and:
SQL error occurred on connection MSGP558P.msg.de:CE1:SAPCE1DB: code=-1,104, state="I1104", message="[-1104] (at 4096): Too complicated SQL statement (KB-stack overflow)";
SQL statement is "SELECT "CONTAINER_ID","TEXT_ID","LOCALE","TIMEZONE","SHORTTEXT","LONGTEXT" FROM "GLX_RRH_TEXT_CACHE" WHERE "LOCALE"...
They all occured within a second.

No dialer command under ISDN BRI interface

Hi all,
I have a 2901 router voice bundle with 4 ISDN BRI ports and would like to have them bundled under Dialer1 interface. Unfortunately it doesn't give me option for Dialer command under BRI interface as expected.
router(config-if)#int bri0/0/0
router(config-if)#dia
router(config-if)#dia
^
% Invalid input detected at '^' marker.
router(config-if)#dialer
^
% Invalid input detected at '^' marker.
router(config-if)#
I assume it's down to the UC license installed on the device but not sure. Does the ISDN BRI interface behave in different way under this license?
Pasting portion of "show ver" as well.
Cisco CISCO2901/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID
2 Gigabit Ethernet interfaces
4 ISDN Basic Rate interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2901/K9
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102

Hi,
Snippet of "sh ver" with IOS version is below:
router#show ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 14:59 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
router uptime is 2 days, 21 hours, 47 minutes
System returned to ROM by reload at 16:48:03 UTC Mon Aug 18 2014
System restarted at 16:50:01 UTC Mon Aug 18 2014
System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M5.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
The output of trying to type dialer command is in the initial post, I'm also pasting all available commands under bri0/0/0.
router(config-if)#int bri0/0/0
router(config-if)#?
Interface configuration commands:
aaa Authentication, Authorization and Accounting.
access-expression Build a bridge boolean access expression
arp Set arp type (arpa, probe, snap), timeout, log
options or packet priority
authentication Auth Manager Interface Configuration Commands
autodetect Autodetect Encapsulations on Serial interface
bandwidth Set bandwidth informational parameter
bgp-policy Apply policy propagated by bgp community string
bridge-group Transparent bridging interface parameters
carrier-delay Specify delay for interface transitions
cdp CDP interface subcommands
clns CLNS interface subcommands
clock Configure serial interface clock
cwmp Configure CPE WAN Management Protocol(CWMP) on this
interface
dampening Enable event dampening
default Set a command to its defaults
delay Specify interface throughput delay
description Interface specific description
dot1q dot1q interface configuration commands
dot1x Interface Config Commands for IEEE 802.1X
down-when-looped Force looped serial interface down
encapsulation Set encapsulation type for an interface
ethernet Ethernet interface parameters
exit Exit from interface configuration mode
flow-sampler Attach flow sampler to the interface
full-duplex Configure full-duplex operational mode
h323-gateway Configure H323 Gateway
half-duplex Configure half-duplex and related commands
help Description of the interactive help system
history Interface history histograms - 60 second, 60 minute
and 72 hour
hold-queue Set hold queue depth
ip Interface Internet Protocol config commands
iphc-profile Configure IPHC profile
ipv6 IPv6 interface subcommands
isdn ISDN Interface configuration commands
isis IS-IS commands
iso-igrp ISO-IGRP interface subcommands
keepalive Enable keepalive
line-power Provide power on the line.
llc2 LLC2 Interface Subcommands
load-interval Specify interval for load calculation for an
interface
logging Configure logging for interface
loopback Configure internal loopback on an interface
mab MAC Authentication Bypass Interface Config Commands
mac-address Manually set interface MAC address
macro Command macro
metadata Metadata Application
mop DEC MOP server commands
mtu Set the interface Maximum Transmission Unit (MTU)
netbios Use a defined NETBIOS access list or enable
name-caching
network-clock-priority Configure clock source priority
no Negate a command or set its defaults
ntp Configure NTP
ospfv3 OSPFv3 interface commands
pulse-time Force DTR low during resets
rate-limit Rate Limit
redundancy RG redundancy interface config
routing Per-interface routing configuration
sdllc Configure SDLC to LLC2 translation
serial serial interface commands
service-policy Configure CPL Service Policy
shutdown Shutdown the selected interface
smds Modify SMDS parameters
snapshot Configure snapshot support on the interface
snmp Modify SNMP interface parameters
source Get config from another source
tarp TARP interface subcommands
timeout Define timeout values for this interface
topology Configure routing topology on the interface
transmit-interface Assign a transmit interface to a receive-only
interface
trunk-group Configure interface to be in a trunk group
tx-ring-limit Configure PA level transmit ring limit
vpdn Virtual Private Dialup Network
vrf VPN Routing/Forwarding parameters on the interface
waas WAN Optimization
router(config-if)#

OS command before file processing in Sender File adapter

Hi there,
I'm having troubles running a os command from the sender file (NFS) adapter. The batch file which I try to run is not getting executed at all.
When I manually run the same batch file from the command prompt then it works perfectly.
The OS command looks like this from the adapter config:
myserver\xi\interface\in\dothis.bat
I have also try with this notation
G:\myserver\xi\interface\in\dothis.bat
Please give me some tips how can I solve this problem, is there any way how can I debug the OS command? When I look at the adapter monitonr no errors are showed.
Thanks for any tips.
Roberto

Hi all,
The problem is solved.
Issue: File Receiver Channel does not execute the OS Command before message processing.
Reason: XI always expects an input file (in my case the sender communication channel) on the source folder. If no input files are found then the rest of the adapter configuration is not executed at all.
In our scenario the OS command is responsible for retrieving the input files from a FTP server the adapter. SO XI will never trigger the OS Command.
Solution: Place a dummy input file on the source folder , the sender adapter will always read in this file and put it back on the same location.(e.g. using a condition in the receiver determination).
Thanks,
Roberto

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

FTP - Run OS Command before file processing

Hi,
I have a requirement wherein I need to FTP a file from XI to a folder in a FTP server . Now FTP Server is set up in such a way that I cannot put the file directly. Before transferring the file , I have to use CD ( change directory command ) to access a particular folder and then transfer the file. This means that I cannot give the folder information directly to TARGET DIRECTORY.
To address this, I decided to use the feature "Run OS Command BEFORE file processing " . And wrote a command 'cd <foldername> .It is not working. Then I tried using "Run OS Command AFTER file processing " and it also didnot work.
Does anyone have any clue how can I address this requirement using FILE Adapter.
thanks,
rakesh

HI,
OS commands will be executed in XI server not in the FTP server. So first you need to connect into FTP server and then you need execute CD command.
option 1) Get the absolute path ie direct path from FTP server so that you can directly connect to FTP server's specific directoty
22) In this case , write the file into your XI server itself by NFS File Transport protocol. Then ftp this file from your XI server into FTP server using Shell Script.
So write a shell script which will be executed in the XI server, inside this write a logic of tranfer of files with FTP protocol. This shell script is executed from the Reciever File adapter with the option OS command.
Hope this helps,
Regards,
Moorthy

OS level command before message processing

Hello
I am getting the files from the SFTP server through the shell script and expecting to be processed by my File sender adapter.
I have configured my File adapter which will poll the directory into which the shell script gets the file and it is scheduled at say 60 sec duration and i had configured OS level command before message processing.
But when i monitored my communication channel and also my directory I found out that its not executing the OS level command. I tried dropping the dummy file into the directory. This time when checked in comm channel monitoring, it executes the OS level command and gets the file from the SFTP server and adapter polls the SFTP file as well. But i don't want to use dummy file each time.
Is there any way by which we can always make adapter to execute OS level command. I tried various options like Process Empty files etc etc but no luck.
Thanks in advance.
regards
rajeev

Rajeev
How about placing a dummy file of 0 bytes, setting up the 'Handling of Empty Files = Don't create message', Processing mode = 'Test' and then writing a post operating command script as well, to move all the files to archive directory except the dummy file.
Not a clean solution but just a thought.
http://help.sap.com/saphelp_nw70/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm

OS command before msg processing: In sender FTP

hi all,
i have a file-to-file scenario.Now i have to pick the latest file from FTP folder based on timestamp.All the files are named in yyyymmdd format .I came to know that i can run an OS command before message processing to delete the old files and keep the latest file in the folder.
But i do know know how to write the script for this particular requirement.Can anybody please help me out with the code???
regards,
Nisheeta

HI,
If you want to delete filenames from Adapter use the following sample code:
File adapter OS Command: D://server_dir//subdir//myCMDfile.bat %F
Batch file:
del %1 new_filename_with_path
OR
Please see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Hope this solves your problem.
Regards
Chilla..

FTP Adapter with Runtime OS Command before Message Processing

Hi PI Techies,
I have a confusion in using Sender FTP Adapter with Runtime OS Command before Message Processing.
Scenario is like this:
Ftp Adapter has to pick a file from FTP server after it checks that a Blank Marker file exists on PI server AL11 directory say "tmp directory".
For this I am using Runtime OS Command before Message Processing where a shell script will check the existence of Blank Marker file on PI server AL11 and if found , it exits the script and FTP Adpater will then pick the Actual Data File and Process it.
Now Confusion:
I am confused in technical execution of steps by FTP Adapter..
Whether FTP Adapter polling initiates the Interface or Runtime OS command checking the File existence will initiate the Interface?
May be its follish to you guys... but please answer ..
Regards,
Anurag

Hi,
I will take it other way as we need to process the Data File not Marker File ( its just for checking the Data File is completely written on FTP server).
Other way mean " Will Poll for Data.txt File and if found then Runtime OS Command will do connect to FTP and check if Marker File exists, if yes then delete the marker file and read the actual Data File for processing.
Please let me know, if Marker File does not exists on FTP folder, will it still read the Data File or will it exit the Adapter execution?
Your help is much appreciated.
Regards,
Anurag

Runtime OS command before Message processing

Hi all,
I have a scenario where the input file from a particular FTP server has to be moved to XI server and then process the message from there. For this I am trying to use "Runtime OS command before Message processing" My problem is that how do I define it in the normal adapter configuration i.e. File access parameters for the sender.
My Query is:
Now should I use the NFS protocol or the FTP protocol ie.in the File access parameters should I specify the directory from which the file needs to be processed after movement to the XI server or should I specify the FTP server details choosing the FTP protocols.
Also provide me some links on how to configure using OS commands.
Thanks & Regards,
Nithiyanandam

Hi,
U can use NFS ...also for RUN Operating sysyrm command
Try using RUN OPERATING SYSTEM COMMAND AFTER MESSAGE PROCESING and RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESING.
You just post ur output file in some folder(Target) , lets say /usr/sap/sapout/test/.and the shell script in this path /usr/sap/bin/convert.sh (use ur Rename logic here).
Inside the File access parameters put target directory and filename scehme and for shell script give processing parameters as File construction mode , File type and OS Command and use a space after the shell script name and the %F.
And for input can use it directly.
For the shell script (which u will use to rename the file after processing) you can put anywhere inside /INTERFACE/XI/ but athe time you provide the pat it will be exactly matching as from where you are using the Shell Script and the file at the coressponding places. It shud be in XI. Thats it and u r done.
Check out these links. First one will help you in acheiving want you want.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
I hope this will solve your problem
thanq
krishna
Edited by: krishnachitanya siddavattam on Mar 10, 2008 5:38 AM

File-FTP command before message processing

Hi experts,
my requirement is as follow :
i have 5 files on my FTP server. All are named FILE_hhssmm.xml
In the configuration of my CC out, i have put as specific file name to get picked 1*.xml
I need a command line in the 'run operating system command before message processing' that renames one of the files as 1FILE_hhssmm.xml so that the files get picked one by one.
I can not manage to do that, i only managed to write a batch file but i only can run it locally...
please, any help would be greatly appreciated...
Kindly,
Jamal

Hi
I have been following this for a while (from other posts as well), you are trying quite hard to get this done
I have couple of ideas...
If you think that this is not going to work, then you can try another solution,
- let the .bat file be scheduled by the scheduler of your OS (this is quite simple) say every 30 mins
- make the .bat file move your input files from your current folder to a child folder
- let XI poll the child folder, every 5 secs or so... anyway your scheduler will send the file only after every 30 mins
- Now you need not rely on the OS command from the Fileadpater of XI
My suspicion (though it is not documented anywhere in help, as far as I know) is that the OS command executes only if there is proper reading of the file (or its presence as per the configuration in adapter settings) & not per polling of the adapter. I infer this from your previous post. but your requirement is peculiar that though the file is present that itself has to have a different name - to be read by adapter...some kind of clashes ??!!.
The problem could be something else also, but the above is a possibility as well..
all the best
Regards
Vishnu

I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

Here's the Apple Support article on Target Mode http://support.apple.com/kb/HT1661

GTS Sales return order to be mapped under Import process/Declaration

Hi,
We have Sales return & return delivery process which needs to be mapped in GTS under Import process.
The standard GTS requires PO and Inbound delivery for Import process. Also we have a requirement to treat the return sales order and delivery under Inward processing with economic impact understanding. Also like to know the customs declaration process involved with inward processing.
I had thought of following option to meet the customer requirement.
1.Trigger the outbound IDOC from return sales order to GTS as Inbound PO ,similarly return delivery as Inbound delivery.
This would need complex developement.Function module development.
2.Can we map the Return sales order type doc and delivery doc with IMPORD instead EXPORD/EXPDLV
Please advise on the GTS scenario suitable for Returns sales process along with import declaration process.
Thanks in advance.
Regards,
Pramod

Hello Pramod,
Which version do you have? In the recent Support Pack levels for GTS 8.0, the SD Returns are already treated just the same as MM Inbound Deliveries. Of course you need to populate the "Preliminary Document" type & number in the FT header data. And, provided you clear the "safekeeping" using Transit processing or the BAdI, the GR then appears in the work-list for Declaration after Goods Receipt as expected.
Regards,
Dave

Missing setipmm command under listenerconfig

Team,
I have been trying to test the mail merge feature on test environment and somehow I can not find a way to execute setipmm command on CLI. As per the user guide 8-5-6, Use the setipmm subcommand of listerconfig to enable the IPMM on the listener.
When I execute listerconfig command I see 4 options 1) NEW 2) EDIT 3) SETUP 4) DELETE and cli won't allow to execute setipmm command under any sub options. Any clue as to what am I missing?
Thanks,
SJ

10.6.8
CS6
Essential or Advanced
I ended up uninstalling, restarting, reinstalling from the cloud.
I was missing the plugins.
I think I've resolved the issue.

Distance command under BGP process

Similar Messages

Maybe you are looking for