Distinguishing between messages in the error destination

Hi,
          First of all, I'm using Weblogic 8.1 SP4.
          I recognize that messages are delivered to the error destination if one of two situations occur:
          1) The message has reached the redelivery limit.
          2) The message has expired.
          In my message-driven bean that picks up messages from the error destination, I need to know the reason why a message ended up there. That is, I need to know whether it was expired or the redelivery limit was reached.
          Is this possible?
          Thanks in advance!
          Henrik Oddershede

The JMS chapter of the book "Professional Oracle WebLogic Server" has a nice discussion of poison message handling.
In your case, I'd recommend adding code to your inbound queue processing application to detect bad format messages and automatically redirect them to a separate queue for manual intervention. This would avoid mixing up the bad format messages with your automatically handled problem messages. You could then write a specialized application that your administrator can use to process the messages.
Tom

Similar Messages

Original destination for messages redelivered to error destination

          Hi,
          I'm writing an admin interface for our system and one part of it needs to manage
          redelivery of messages. We have multiple destinations, and I have configured
          one queue to act as an error queue for them all. My plan had been to allow users
          to resubmit messages to their original destination - but I dont have that information.
          Message.getDestination() returns my error queue, which makes sense. I was hoping
          there'd be a header I could extract that might contain the name for of the original
          destination, but I dont seem to be able to find it.
          The only thing I can think of is to have a separate error queue for each destination,
          this would allow me to assume that all messages were initially sent to the corresponding
          queue - but it seems a little heavy handed... does anyone else have a better solution?
          cheers
          dim


Sorry Dmitri, I mixed up names here.
          "Adarsh Dattani" <[email protected]> wrote in message
          news:[email protected]...
          > Terrence,
          >
          > Check out the "Error Destination Manager" sample app at
          > http://dev2dev.bea.com before you write a lot of code. I have already the
          > built the admin facility that you are talking about and have also included
          > the source code and documentation with it. Let me know if you need any
          help
          > with it.
          >
          > AD
          >
          > "Dmitri Colebatch" <[email protected]> wrote in
          message
          > news:[email protected]...
          >
          > >
          > > Hi,
          > >
          > > I'm writing an admin interface for our system and one part of it needs
          to
          > manage
          > > redelivery of messages. We have multiple destinations, and I have
          > configured
          > > one queue to act as an error queue for them all. My plan had been to
          > allow users
          > > to resubmit messages to their original destination - but I dont have
          that
          > information.
          > > Message.getDestination() returns my error queue, which makes sense. I
          > was hoping
          > > there'd be a header I could extract that might contain the name for of
          the
          > original
          > > destination, but I dont seem to be able to find it.
          > >
          > > The only thing I can think of is to have a separate error queue for each
          > destination,
          > > this would allow me to assume that all messages were initially sent to
          the
          > corresponding
          > > queue - but it seems a little heavy handed... does anyone else have a
          > better solution?
          > >
          > > cheers
          > > dim
          > >
          >
          >

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

HT1926 I cannot download the latest Itunes software, and I am being given the following message. 'The error code is 2324'. Can anyone help???

I cannot download the latest Itunes software, and I am being given the following message. 'The error code is 2324'. Can anyone help???

(Apologies for barging in, Steve.)
I'd also try the fixit from the following Microsoft document:
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

TS3212 I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?

What does the error message say? (Precise text, please.)

I try connecting to I tunes i get an error message with the error message IxE000068 any ideas

my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod

Did the error number really start with
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Missing some error messages from the error stack

Hi all,
We use some PL/SQL code to load data in to the database.
One value was to large for a column.
I got the errors below, but there are some messages missing from the alert file and from the trace file.
Error messages:
ORA-06502: PL/SQL: numeric or value error
ORA-01401: inserted value too large for column
That's it, noting else. I can't see anything else in the alert log either.
No trace files either.
Can someone please explain to me why am i missing the rest of the error stack, like the column name where the issue occurs?
Thanks.

Peter,
No your code won't work the same in 10g as it would in 9i and earlier. The -1401 exception is not secretly catching -12899 now. So that means it could be an upgrade issue: you'd have to manually change the code when upgrading to 10.
Here is a little test on 10.2.0.1:
SQL> create table t
2 ( id number(2)
3 , name varchar2(2)
4 )
5 /
Tabel is aangemaakt.
SQL> declare
2    my_exception exception;
3    pragma exception_init(my_exception,-1401);
4 begin
5    insert into t values (99,'AAA');
6 exception
7 when my_exception then
8    dbms_output.put_line('my error message');
9 end;
10 /
declare
FOUT in regel 1:
.ORA-12899: waarde te groot voor kolom "RWIJK"."T"."NAME" (huidige waarde: 3, maximumwaarde: 2)
ORA-06512: in regel 5Regards,
Rob.

ICWC: Is it possible to create a link in a message in the error line

Hi,
after saving a service order in the IC WebClient the success message (including the object id) is shown in the persistent header area of the ICWC - in the error single line.
Is there a possibility to have a link in this area? I want to create a link onto the object id to directly get into this order again.
Thanks for your help.
Regards,
Ben

Hi,
thanks for your response. Just for the understanding, in my case there are no error messages displayed in the error line. The only visible message is the success note "service ticket XYZ is saved successfully". After saving the ticket correctly we have to navigate to a different view. Changing this is not possible.
So the new client requirement is to create a link at the "XYZ" (object id) in this error (success) message. But I think there is no possiblity to get a navigational link or a usual html-link at that place.
Maybe you got some more ideas?
Thanks and best regards,
Ben

Distinguishing Between Instances of the Java launcher in Task Manager

I'm interested in being able to distinguish between multiple instances of the standard Java launcher, specifically javaw, in the Windows Task Manager. The multiple javaw instances are Java applications that are part of a commercial software product. The installation and launching of the Java applications is already handled and I'm merely interested in being able to tell them apart in the Task Manager.
Are there any obvious problems/issues, including licensing issues, related to creating multiple renamed copies of the standard Java launcher javaw that would then be launched by our software product to allow them to be distinguishable in the Windows Task Manager?

Technically, it works - as for the licensing, you need to resolve that question by reading Sun's license that you agreed to by downloading Java - and maybe consulting Sun. (A link to "Licensing" is below.)

Recall a message from the JMS destination

We are sending messages to a queue, using IBM MQ Series for messaging and JMS as the messaging system.
Could you please let me know, if there is a way we can recall messages sent to the queue?
Thanks,
Jayashree.

Are you using session or transactions?
If yes, you can do rollback.(I hope thats what you are looking for).
If you are looking for a way to get the message from the queue without
removing it, why not write a client code for that.

How can I distinguish between applets from the servlet end??

What I'm looking for is just a way to distiguish between one applet from another on the servlet side. I know the session name and id will be helpful in this case. I was wondering, can I get the name of the client applet(Ex: appletClientOne or appletClientTwo) so that I can keep track of which messages to send to specific applet.

Yes. Store the name of the applet in a cookie or HTML hidden input tag. Your other option is to connect to different URL's on your Servlet. Finally, you could use a combination of the above, and then set which applet a user is using in his/her HttpSession.
- Saish

"Error sending Message - check your ...." doesn't identify the message generating the error which is probably one which is autoforwarded.

I have an email filter which auto-forwards an email depending on the To: field. When I open Thunderbird the inbox sometimes displays emails which should have been forwarded which are not flagged as forwarded. If I then manually forward this email I get a response " email successfully sent" followed shortly after by another message " error sending message ... check your email addresses (or similar)" - Is this the same email as the one which I have just been told has been successfully sent - how can I tell which email the message relates to - has it been sent? etc etc???
Thanks for reading this far - any help would be very much appreciated
MC

Sorry Matt - 'fraid i'm guilty of not supplying all the facts ... the message arises from Thunderbird vers 9.01 running on a laptop with OS Win 7 Home Premiun SP 1. I think your reference is to problems running other email software.
Mike

I/O Frozen message in the Error logs

I see very often this message, do I need to take care any precautions, is it going to effect in long run?
I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.

Hi,
You probably also have something like "I/O was resumed on database master. No user action is required". right?
I am guessing that you have some type of VSS/Snapshot at the same time. There are 2 step while the VSS process that need to frozen the IO, which might result with this error (first step might take till 60 seconds and second till 10 seconds).
You can check the presentation slide 14 the step on that marked in red (7, and 8).
* You might reduce the time if you stop some VSS writers that you do not need.
- Are you using the machine for services other than the SQL Server? If so, then you probably have several VSS writers and that might slowdown these steps.
- How do you backup your databases, is there any backup based on VSS (like VDI backups)?
- are you using snapshot, in any other way?
Ronen Ariely
[Personal Site] [Blog] [Facebook]

I am trying to update my 2nd generation iPod via iTunes on my macbook pro but an error message with the error code -1 appears. I cannot find this code anywhere ...can anyone help?

...anyone?

Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT203174 When I try to sync my iPhone to iTunes it gives me a message with the error (-54). Does anyone know what this means?

I own an iPhone 5s, but this also seems to occur with any of the other devices I try to back up or sync.

Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

Distinguishing between messages in the error destination

Similar Messages

Maybe you are looking for