Distorted Recording when using powered mixer into GB

Hello, I'm trying to trial a new mic setup for my drums, and need to test the mix (goal is to have one already mixed input into PA). I have a Crate PA6FX Powered Mixer, using an Alesis io2 USB into my Mac Pro, then into GB. I am able to record, however, the recording is VERY distorted. I've checked input settings, and reduced the master volume and inputs to almost 0. Still get the same distortion. I'm using the "speaker" jack from the mixer. I don't see anywhere else to connect it to. Any ideas on what is causing this distortion?

http://www.thehangtime.com/gb/gbfaq2.html#recordlength

Similar Messages

Not being able to hear application audio on quicktime screen recording when using headset

Can someone tell me how to still hear the computer audio (like the application sound) on while using quicktime screen recording when using headset?
Someone help me please or tell me another application to do this with.

hi paula
your problem could be hardware/software. lets hope its software issue first and i'd like you to do these:
if you have personal files on volume c, copy/backup them. shut down your computer, press one key recover button to perform clean windows installation. then check if the issue still persists.
if you don,t want to use okr, you can use windows restore to restore your computer to previous restore points but if it's windows/virus issue, it may not help.

Loud distorted noise when using STP Noise Reduction

Another very strange STP glitch.
When using Noise Reduction, I set the noise print. Then open the Noise Reduction dialog (or HUD, I guess). The first time I play the mono audio file I'm editing, sound comes out of the left speaker at perhaps slightly reduced volume. Stop playback. Then hit the Play button again (still in the Noise Reduction dialog). Playback is now INCREDIBLY LOUD AND DISTORTED. So loud that it probably damaged my speakers (not to mention making me jump out of my chair). Thinking there was a problem with the file, I recorded some audio (again a single mono track). Same result. Deleted all the plists I could think that might be involved. No luck.
Next, I actually went to a different computer - my G5 2.0 GHz DP. Same result, so I am completely puzzled on this one. Any ideas.
Both machines were running STP v 2.02. The original problem was discovered on a MacBook Pro, 2.4 GHz. Both have 4GB RAM and are running Mac OS X 10.5.1.

APPLE!!! FIX THIS!!!!!! IT IS PHYSICALLY DAMAGING TO THE USER. COULD EASILY BLOW SOMEONE'S HEARING.
I just went to play a preview of the file while adjusting the settings in reduce noise print WITH HEADPHONES ON! I was attempting to take out a very loud running generator in the background of an interview and nearly blew my hearing in my left ear. I threw the headphones across the room. Painful to say the least. My sound was only on the first notch and the result was louder than I can get my headphones to play with the volume all the way up.
JamesGray, if you file a lawsuit, let me know, no joke. This is a dangerous and irresponsible game Apple is playing with their professional user's hearing, and therefore their livelihood and quality of life.

Can't get sound to record when using isight in my macbook pro

for some reason it just records the video no audio when using my macbook pro. any thoughts?

flux302 wrote:
for some reason it just records the video no audio when using my macbook pro. any thoughts?
Verify your iMovie "Voiceover" audio source is set to use your MBP's internal Mic before you record.
http://docs.info.apple.com/article.html?path=iMovie/7.0/en/10311.html
(You might also need to change it in System Preferneces > Sound > Input.)
Also verify the microphone's "Level" is not muted or adjusted too low in either place.
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Annoying distortion-sound when using Org. N95 Head...

Is it only me that has this distortion when using the original head-set?
Button pressed: *spszzzz*
I thought this was the 21-century and distortion was long gone? maybe Nokia reinveted it?

so no one here can help me ?
We can't see your laptop or read your mind. Which model do you have?
There's a new BIOS which purports to fix sound problems for these.
Satellite A500-ST5602, A500-ST56X4, A500-ST56EX, A500-ST6622, A500-ST5601, A500-ST56X3, A500-ST5605, A500-ST5606, A500-ST6621, A505-S6996, A505-S6995, A505-S6994, A505-S6992, A505-S6991, A505-S6990, A505-S6985, A505-S6982, A505-S6981, A505-S6980, A505-SP7930R, A505-SP7930C, A505-SP7930A, A505-SP7913R, A505-SP7913C, A505-SP7913A, A505-SP7914R, A505-SP7914C, A505-SP7914A, A505-SP6996R, A505-SP6996C, A505-SP6996A, A505-S6979, A505-S6976, A505-S6975, A505-S6971, A505-S6972, A505-S6970, A505-S6973, A505-S6969, A505-S6967, A505-S6966, A505-S6965, A505-S6960, A505-SP6986R, A505-SP6986C, A505-SP6986A, A505-SP6988C, A505-SP6988A, A505-S6997, A505-S6998, A505-S6999, A505-S6986, A505-S6993, A505-S6984, A505-S6983, A505-S6989, A505-SP6988R, A505-S69803,
M500-ST5405, M500-ST54E2, M500-ST54E1, M500-ST5401, M500-ST6421, M500-ST54X1, M500-ST6422, M505-S4949, M505-S1401, M505-S4945, M505-S4947, M505-S4940, M505-S4982, M505-S4980, M505-S4985-T, M505-S4990-T, M505D-S4970RD, M505D-S4970RD, M505-S4972, M505-S4975, U500-ST5302, U500-ST6321, U500-ST6322, U500-ST5305, U505-S2925P, U505-S2925BN, U505-S2925W, U505-S2930, U505-S2935, U505-S2940, U505-SP2916A, U505-SP2916C, U505-SP2916R, U505-S2950PK, U505-S2950RD, U505-S2950WH, U505-S2960, U505-S2960PK, U505-S2960RD, U505-S2960WH, U505-S2961, U505-S2970, U505-S2965, U505-S2965RD, U505-S2965WH, U505-S2980-T, U505-S2975, U505-S2002, U505-SP3018M, U505-SP3018L, U505-S2950, U505-SP2990A, U505-SP2990R, U505-SP2990C
Satellite Pro U500-EZ1321, U500-EZ1311
-Jerry

No Audio Key Frames Added When Using Track Mixer

Yesterday this worked fine today not.
I edited the video from a live panel at Comic Con. The audio was recoded on a Sound Devices 8 track recorder.
After the picture was edited I added the 6 tracks of audio to do the audio mix using the track mixer as I always do.
I set all tracks to write and lowered all the faders all the way down then as the timeline played I brought up one fader on the presenter and after a few moments I stopped the time line. All channels go to touch I move the scrubber back to before I started to raise the fader and played back, nothing. No audio no fader movement. When I look at the Show Key-frames,Track Key-frames I see no key frames added.
Any one have an idea?
I edited a panel yesterday in the same project different sequence same settings with video and audio recorded the same way it work fine.
Thanks
Dennis
Well I found out how to fix it. Make a new Sequence copy my edited clips into it, add the audio and now it works right.
It looks like the sequence got corrupted so just creating a new one fixed the problem.
I have seen problems with corrupted sequences before but not causing key frame write issues.
Just a side note I also earlier had red frames showing up that usually mean dropped or bad frames but after restarting the program that went away.
By the way this was with CC 2014
I will mark this answered

The in and out points, unless changed, are set for the whole sequence. The automation will not write if this in to out area does not included the mix section. It might be that the in/out area of your first sequence was incorrect but this was fixed when you made the new sequence.

How to update around 12 lac record when using co-related update

Hello Everyone
I have two tables and 14 columns in them are similar, I mean have the same name
Now I want to update 1 column using the records in the other table by using join condition so I wrote a code but as the records are around 12 lac which need to be updated so my code hangs after 25%
UPDATE TABLE A
SET A.COLUMN1=(SELECT B.COLUMN1
                     FROM TABLEL B
                     WHERE B.COLUMN2 = A.COLUMN2
                     AND B.COLUMN3 = A.COLUMN3
                     AND B.COLUMN4= A.COLUMN4
                     AND B.COLUMN5 =A. COLUMN5
                     AND B.COLUMN6 = A.COLUMN6
                     AND B.COLUMN7=A.COLUMN7
                     AND B.COLUMN8 = A.COLUMN8
                     AND B.COLUMN9 = A.COLUMN9
                     AND B.COLUMN10 = A.COLUMN10
                     AND B.COLUMN11 = A.COLUMN11
                     AND B.COLUMN12 = A.COLUMN12
                     AND B.COLUMN13 = A.COLUMN13
                     AND A.PLAN_ID = 1000000300
                     AND B.PLAN_ID = 1000000300)
WHERE COLUMN14= 1000000300
AND COLUMN15=1000000002please suggest a way that the update could be done easily
Edited by: Peeyush on Feb 8, 2011 5:56 AM
Edited by: Peeyush on Feb 8, 2011 5:57 AM

You can rewrite it using a merge statement, to prevent starting that subquery numerous times.
Here is an example that mimics your situation, with two tables containing only 10 rows:
SQL> create table table_a
2 ( column1
3 , column2
4 , column3
5 , column4
6 , column5
7 , column6
8 , column7
9 , column8
10 , column9
11 , column10
12 , column11
13 , column12
14 , column13
15 , column14
16 , column15
17 , plan_id
18 )
19 as
20   select -1
21        , level
22        , 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
23        , 1000000300
24        , case mod(level,2) when 0 then 1000000002 else 1000000000 end
25        , 1000000300
26     from dual
27 connect by level <= 10
28 /
Table created.
SQL> create table table_b
2 as
3 select rownum column1
4       , column2
5       , column3
6       , column4
7       , column5
8       , column6
9       , column7
10       , column8
11       , column9
12       , column10
13       , column11
14       , column12
15       , column13
16       , column14
17       , column15
18       , plan_id
19    from table_a
20 /
Table created.
SQL> select * from table_a
2 /
   COLUMN1    COLUMN2    COLUMN3    COLUMN4    COLUMN5    COLUMN6    COLUMN7    COLUMN8    COLUMN9   COLUMN10   COLUMN11   COLUMN12   COLUMN13   COLUMN14   COLUMN15    PLAN_ID
        -1          1          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        -1          2          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          3          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        -1          4          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          5          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        -1          6          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          7          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        -1          8          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          9          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        -1         10          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
10 rows selected.
SQL> alter session set statistics_level = all
2 /
Session altered.
SQL> UPDATE TABLE_a A
2 SET A.COLUMN1=(SELECT B.COLUMN1
3                       FROM TABLE_b B
4                       WHERE B.COLUMN2 = A.COLUMN2
5                       AND B.COLUMN3 = A.COLUMN3
6                       AND B.COLUMN4= A.COLUMN4
7                       AND B.COLUMN5 =A. COLUMN5
8                       AND B.COLUMN6 = A.COLUMN6
9                       AND B.COLUMN7=A.COLUMN7
10                       AND B.COLUMN8 = A.COLUMN8
11                       AND B.COLUMN9 = A.COLUMN9
12                       AND B.COLUMN10 = A.COLUMN10
13                       AND B.COLUMN11 = A.COLUMN11
14                       AND B.COLUMN12 = A.COLUMN12
15                       AND B.COLUMN13 = A.COLUMN13
16                       AND A.PLAN_ID = 1000000300
17                       AND B.PLAN_ID = 1000000300)
18 WHERE COLUMN14= 1000000300
19 AND COLUMN15=1000000002
20 /
5 rows updated.
SQL> select * from table(dbms_xplan.display_cursor(null,null,'allstats last'))
2 /
PLAN_TABLE_OUTPUT
SQL_ID 2xky09vcgyzpr, child number 0
UPDATE TABLE_a A SET A.COLUMN1=(SELECT B.COLUMN1                      FROM
TABLE_b B                      WHERE B.COLUMN2 = A.COLUMN2
AND B.COLUMN3 = A.COLUMN3                      AND B.COLUMN4= A.COLUMN4
            AND B.COLUMN5 =A. COLUMN5                      AND B.COLUMN6 =
A.COLUMN6                      AND B.COLUMN7=A.COLUMN7                      AND
B.COLUMN8 = A.COLUMN8                      AND B.COLUMN9 = A.COLUMN9
         AND B.COLUMN10 = A.COLUMN10                      AND B.COLUMN11 =
A.COLUMN11                      AND B.COLUMN12 = A.COLUMN12
AND B.COLUMN13 = A.COLUMN13                      AND A.PLAN_ID = 1000000300
                AND B.PLAN_ID = 1000000300) WHERE COLUMN14= 1000000300 AND
COLUMN15=1000000002
Plan hash value: 4173428670
| Id | Operation           | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   1 | UPDATE             | TABLE_A |      1 |        |      0 |00:00:00.01 |      25 |
|* 2 |   TABLE ACCESS FULL | TABLE_A |      1 |      5 |      5 |00:00:00.01 |       3 |
|* 3 |   FILTER            |         |      5 |        |      5 |00:00:00.01 |      15 |
|* 4 |    TABLE ACCESS FULL| TABLE_B |      5 |      1 |      5 |00:00:00.01 |      15 |
Predicate Information (identified by operation id):
   2 - filter(("COLUMN14"=1000000300 AND "COLUMN15"=1000000002))
   3 - filter(:B1=1000000300)
   4 - filter(("B"."COLUMN2"=:B1 AND "B"."COLUMN3"=:B2 AND "B"."COLUMN4"=:B3 AND
              "B"."COLUMN5"=:B4 AND "B"."COLUMN6"=:B5 AND "B"."COLUMN7"=:B6 AND
              "B"."COLUMN8"=:B7 AND "B"."COLUMN9"=:B8 AND "B"."COLUMN10"=:B9 AND
              "B"."COLUMN11"=:B10 AND "B"."COLUMN12"=:B11 AND "B"."COLUMN13"=:B12 AND
              "B"."PLAN_ID"=1000000300))
Note
   - dynamic sampling used for this statement
40 rows selected.Note that you have 5 starts of operation 4, meaning 5 full table scans.
SQL> select * from table_a
2 /
   COLUMN1    COLUMN2    COLUMN3    COLUMN4    COLUMN5    COLUMN6    COLUMN7    COLUMN8    COLUMN9   COLUMN10   COLUMN11   COLUMN12   COLUMN13   COLUMN14   COLUMN15    PLAN_ID
        -1          1          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         2          2          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          3          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         4          4          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          5          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         6          6          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          7          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         8          8          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          9          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        10         10          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
10 rows selected.
SQL> rollback
2 /
Rollback complete.
SQL> merge into table_a a
2 using table_b b
3     on (   a.column2 = b.column2
4        and a.column3 = b.column3
5        and a.column4 = b.column4
6        and a.column5 = b.column5
7        and a.column6 = b.column6
8        and a.column7 = b.column7
9        and a.column8 = b.column8
10        and a.column9 = b.column9
11        and a.column10 = b.column10
12        and a.column11 = b.column11
13        and a.column12 = b.column12
14        and a.column13 = b.column13
15        and a.plan_id = 1000000300
16        and b.plan_id = 1000000300
17        and a.column14 = 1000000300
18        and a.column15 = 1000000002
19        )
20   when matched then
21        update set a.column1 = b.column1
22 /
5 rows merged.
SQL> select * from table(dbms_xplan.display_cursor(null,null,'allstats last'))
2 /
PLAN_TABLE_OUTPUT
SQL_ID by8mwr4pxfv46, child number 0
merge into table_a a using table_b b    on (   a.column2 = b.column2       and a.column3 = b.column3
and a.column4 = b.column4       and a.column5 = b.column5       and a.column6 = b.column6       and
a.column7 = b.column7       and a.column8 = b.column8       and a.column9 = b.column9       and
a.column10 = b.column10       and a.column11 = b.column11       and a.column12 = b.column12       and
a.column13 = b.column13       and a.plan_id = 1000000300       and b.plan_id = 1000000300       and
a.column14 = 1000000300       and a.column15 = 1000000002       ) when matched then       update set
a.column1 = b.column1
Plan hash value: 1110892605
| Id | Operation            | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers | OMem | 1Mem | Used-Mem |
|   1 | MERGE               | TABLE_A |      1 |        |      1 |00:00:00.01 |      13 |       |       |          |
|   2 |   VIEW               |         |      1 |        |      5 |00:00:00.01 |       6 |       |       |          |
|* 3 |    HASH JOIN         |         |      1 |      1 |      5 |00:00:00.01 |       6 |   778K|   778K| 573K (0)|
|* 4 |     TABLE ACCESS FULL| TABLE_A |      1 |      5 |      5 |00:00:00.01 |       3 |       |       |          |
|* 5 |     TABLE ACCESS FULL| TABLE_B |      1 |     10 |     10 |00:00:00.01 |       3 |       |       |          |
Predicate Information (identified by operation id):
   3 - access("A"."COLUMN2"="B"."COLUMN2" AND "A"."COLUMN3"="B"."COLUMN3" AND "A"."COLUMN4"="B"."COLUMN4"
              AND "A"."COLUMN5"="B"."COLUMN5" AND "A"."COLUMN6"="B"."COLUMN6" AND "A"."COLUMN7"="B"."COLUMN7" AND
              "A"."COLUMN8"="B"."COLUMN8" AND "A"."COLUMN9"="B"."COLUMN9" AND "A"."COLUMN10"="B"."COLUMN10" AND
              "A"."COLUMN11"="B"."COLUMN11" AND "A"."COLUMN12"="B"."COLUMN12" AND "A"."COLUMN13"="B"."COLUMN13")
   4 - filter(("A"."PLAN_ID"=1000000300 AND "A"."COLUMN14"=1000000300 AND "A"."COLUMN15"=1000000002))
   5 - filter("B"."PLAN_ID"=1000000300)
Note
   - dynamic sampling used for this statement
36 rows selected.And with the merge you have only one.
SQL> alter session set statistics_level = typical
2 /
Session altered.
SQL> select * from table_a
2 /
   COLUMN1    COLUMN2    COLUMN3    COLUMN4    COLUMN5    COLUMN6    COLUMN7    COLUMN8    COLUMN9   COLUMN10   COLUMN11   COLUMN12   COLUMN13   COLUMN14   COLUMN15    PLAN_ID
        -1          1          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         2          2          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          3          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         4          4          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          5          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         6          6          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          7          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
         8          8          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
        -1          9          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000000 1000000300
        10         10          1          1          1          1          1          1          1          1          1          1      1 1000000300 1000000002 1000000300
10 rows selected.On 1.2M rows, the savings should be considerable.
Regards,
Rob.

Distorted audio when using BlueTooth with Samsung i500 Vehicle Mount

The audio is severly distorded using a bluetooth headset while the phone is plugged into power using the Samsung i500 Vehicle Mounts built-in power port. The only workaround I have found is to flip the phone around and plug power directly into the phone instead of the Samsung i500 Vehicle Mounts built-i power connection. This issue has been reproduced using different i500 Vehicle Mounts, different USB power cords, and within differnt cars. There doesn't seem to be anyway to get the distortion to go away except to not use the built-in power port on the mount. Please let me know if anyone knows a fix for this issue.

Yeah, the built-in audio connector on the Vehicle Mount also doesn't work. When I bought my mount there was a little sticker over that connector that said it wouldn't work until Verizon updates the fascinate to version 2.2. However, nothing I saw indicated that using the built-in power connector would cause bluetooth audio distortion. So at this time I just put my phone into the mount backwards and plug the usb power chord directily into the phone instead so that the bluetooth audio quality is ok. When I want to get sound on my radio I just plug an audio cable from the sterio into the phone's headphone jack. Oh and I might as well add that if I get a call while I have the audio cable plugged into the headphone jack there is no way for anyone to hear me when I answer the call. So I have to unplug the audio cable before answering the call. Unfortunately, I've found that when an audio cable is plugged into the headphone jack, the phone disables speakerphone and bluetooth. Let's hope they get these issues fixed when they roll out the 2.2 software update.

How do I get CS6 to not distort color when using Lion and printing from Epson R2880?

Ever since I up-graded to CS5 , the color has been distorted. It is not an Epson Lion problem because printing from preview or iPhoto the color is perfect.
Adobe has known about this problem since January 23, 2012. Their help people have taken over my computer for hours at a time and not been able to discover the source of the problem
I thought they might have fixed it with CS6 but no luck I chose use CS4 settings because CS4 had worked.
I printed using Printer Manages Color and color matching, epson color. I selected the correct media. The prints came out dark. The yellows turned green and the greens turned blue/green, reds became dull and blues a bit dark.
This is most upsetting because I cannot afford to buy a new printer and ink. Also I should not have to buy new equipment because Adobe cannot make their product work correctly.

cmszinnia wrote:
If the printer prints colors accurately from Lion apps,which it does, then the problem is in Adobe.
Uh...ok...then the REST of the FREE world is going down the tubes because obviously, Adobe has screwed up?
Some of us are using LR4 and CS6 to print and getting accurate and excellent results with Lion (10.7.3) so the question begging for an answer is why can't you?
Read very carefully what Chris wrote...the odds are REAL GOOD you are NOT using the correct settings...but since you don't bother to show or explain the EXACT settings you are using when printing, we'll never know. Will we?
If the vast magority of the user base is NOT having an issue, to what do you attribute the disconnect? User Error is the single most likely result...
You want help? Or do you want to argue?
I know a little bit about printing and I seem to be able to print with zero issues on a wide variety of Epson printers...you wanna place blame or do you wanna learn how to fix the problem? (clue, the odds are it isn't Adobe nor Epson leading to the problems, it's you bud).

Column Aliases not working when using MS Query into Excel?

I setup an Oracle ODBC connection from my desktop to an Oracle 9i DB, and created an MS Query sql:
select sysdate as "Today" from dual;
When I tried to run it and return it to Excel, it would ignore the column alias of 'Today' and keep putting in 'SYSDATE' as the column header.
SYSDATE
==========================
2007-04-18 11:55:54
What I expected was:
TODAY
==========================
2007-04-18 11:55:54
I've read some other reports out there on the web and tried changing a registry entry per the MSDN knowledge base, but that didn't help. Several of the existing threads in this forum only refer to exporting directly to an Excel file from Oracle, rather than pulling the information from the db into excel using an abstraction layer such as ODBC (ADO would be similar I'm sure).
Just curious if other Oracle SQL guys have run into this same problem. I'm sure somebody's had to use a column alias in their Oracle->Excel results before..

Are you using SQL plus? Have you tried Oracle's SQL
developer? It is free, does not require an install
on your computer (you can run it from a flash drive),
and it exports pretty smoothly to excel.I'm not using SQL Plus -- this was purely excel / ODBC as the client and Oracle as the database layer.
I had looked at SQL Developer, along with DB Visualizer (along the same lines , as a sql gui with some export capability to .csv and excel formats). However, I don't think it quite served my purpose in trying to have a workable data-source where I could pull from Excel and use VBScript or C# to do the manipulation and customized reporting/charting/pivot-tabling.
My eventual workaround was to bypass MS Query altogether for creating the 'external data table' in Excel, and instead create the query through code.

Error :Invalid TLV Record when using with VC++ UI Thread

Post Author: divya prakash
CA Forum: Other
Hello
I am using Crystal Report XI with VC++ 6.0 .When I am trying to print report directly on button click event all goes well.But as soon as i try to print report calling that function in a UI Thread it gives two error :
This document could not be opened. It does not appear to be a Crystal Report document. This document has the expected file extension (.RPT) but it seems to be corrupt. If the report use to work, try opening it with a different version of Crystal Reports and if that still does not work, please contact your administrator.
after pressing OK it gives another error : Invalid TLV record.
I dont know what is going wrong ...same code works well if I dont call in UI Thread and the moment I try to do the same by calling that function in UI Thread it gives above errors.
I have registered :craxdrt.dll as well as crqe.dll .... than also ..
Please help me I am totally stuck ...
Thanks in advance
- Divya Prakash

Post Author: divya prakash
CA Forum: Other
Hello
I am using Crystal Report XI with VC++ 6.0 .When I am trying to print report directly on button click event all goes well.But as soon as i try to print report calling that function in a UI Thread it gives two error :
This document could not be opened. It does not appear to be a Crystal Report document. This document has the expected file extension (.RPT) but it seems to be corrupt. If the report use to work, try opening it with a different version of Crystal Reports and if that still does not work, please contact your administrator.
after pressing OK it gives another error : Invalid TLV record.
I dont know what is going wrong ...same code works well if I dont call in UI Thread and the moment I try to do the same by calling that function in UI Thread it gives above errors.
I have registered :craxdrt.dll as well as crqe.dll .... than also ..
Please help me I am totally stuck ...
Thanks in advance
- Divya Prakash

Noisy recording when using adobe audition _ how to make it better

Hi there,
I have just downloaded adobe audition cs5 for my recordings. When I record something, I have a noise at the back round which is created by I don`t know what. The computer doesn ot make noise and my room is quite.
Configuration before recording :
Primary recording :
After the amplification :
[0 to 1.8] ms shows the sounds that has been generated by I don`t know what.
You can get a wave file "Untitled 1.wav" I made from http://dk0.ti1ca.com/get/27.18.148.125/1m7qm7qh/Untitled%201.wav
I am using Windows XP sp3
Thanks for your help.

@topomorto Please find below the snaps you asked for.
Here is another test I have just done : http://dk1.ti1ca.com/get/27.18.148.125/2myov2k6/Untitled%201.wav

CR & LF characters at the end of records when using delimited flat file (CR is missing)

Hi All,
I have a requirement where data of SQL query needs to be loaded to a CSV file.
The row delimiter of the CSV file has to be CR-LF.
In the flat file connection manager, I have mentioned Header Row delimiter as "{CR}{LF}" and under columns section, row delimiter is specified as "{CR}{LF}".
But when I open the detsnation CSV file using notepad++, I see only "LF" at the end of all rows.
Can you please let me know how can I get both CR & LF at the end of each row
Below is the screen shot of the flat file connection manager which I have used for CSV destination file:
Raksha

Hi Raksha,
Just as Vaibhav said, I’m curious why you need use “CR & LF” as row delimiter in Flat File Connection Manage. Since you can use "CR" as row delimiter in Flat File Connection Manager and it worked fine, you can directly specify "CR"
as row delimiter in Flat File Connection Manage.
Besides, if you still want to replace “LF” with “CR & LF” in the text file, we can use Notepad++’s Find/Replace feature or Edit -> EOL Conversion to achieve the goal. Then we can specify "CR & LF" as row delimiter in Flat File
Connection Manage.
The following blog about conversion between “LF” and “CR & LF” row delimiter in Notepad++ is for your reference:
http://sqlblog.com/blogs/jamie_thomson/archive/2012/08/07/replacing-crlf-with-lf-using-notepad.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Empty record when using FCC!

The target output file has empty line after File Content Conversion. I using XSLT mapping with selection criteria.
Sample output XML
<root>
<child>
<field1>field1</field1>
<field2>field2</field2>
</child>
</root>
XI output
(empty line)
field1|field2
FCC parameters
Recordset Structure: child
child.fieldSeparator: |
child.endSeparator: 'nl'
Expected output:
field1|field2
Message was edited by:
Sarveshwar Kuncha

Hi,
>>Recordset Structure: child
Change it to Root,1,child,*.
it will work.check below links for reference.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
Regards,
Phani
Reward Points if helpful

Lines when using the mixer brush?

PS said my hardware wasn't supported (not suprising, it's just a laptop from where I work), so this might be due to that. Though even things like the roate and larger mixer brush were running smoothly, so I'm not sure what's causing it.
I was just playing with the mixer brush, with some random colors and settings (since it was running so nicely): http://img843.imageshack.us/img843/2549/mixerbrushcs6.jpg
I put a green square arounf it the lines.
Is anyone else getting this?

What was the spacing on the brush? It looks like you came in from the edge with a wet brush and it mixed picked up paint with what is on the brush on the next applied tip.Try reducing spacing on your brush to around 3 or 4%, that should clear it up.

Distorted Recording when using powered mixer into GB

Similar Messages

Maybe you are looking for