Distributed Application group relationships not displaying in health view (VSAE created management pack)

Hi there,
I am working through my first complex Distributed Application which I have been creating using VSAE. I have followed Brian Wren's training, but the result does not match what I am expecting.
I have created a single DA (based on the System.Service class) with four groups (base on System.Group) which will be populated with the core components of the application. Each of the groups (and the DA) is configured as a Public, Non-Abstract, Non-Hosted
Singleton, as per the MPAuthor.Stores example. Each of the four groups is linked via an Internal, Non-Abstract System.Containment relationship to the DA.
When I open the DA diagram view, I only get the DA class visible. Each of the four groups shows in the Groups node in the Operations Console. Based on the experience with importing the MPAuthor.Stores MP, I was not expecting to see the groups in the Groups
node, but linked in the DA diagram node.
I have configured dependency monitors for each of the groups, and these display in the Health Explorer but there is no health rolls up.
The only difference between the MPAuthor.Stores module and mine (that I am aware of) is MPAuthors.Stores is a 2007 R2 MP, and I have created a 2012 MP as I will be deploying to 2012 SP1 and there is no need for backwards compatibility.

Hi Vladimir,
Thanks again for your response. I'm not quite sure what you mean with your last post. My current DA model is:
| Dist App |
| System.Service |
|
| | | |
| Group 1 | | Group 2 | | Group 3 | | Group 4 |
| System.Group | | System.Group | | System.Group | | System.Group |
Where all the groups have discoveries for membership. Are you saying that I need another level of groups below these to house the objects?
I thought that the point of System.Group as a base class was that it did not appear in the console, but gave an automatic health rollup (as per TechNet). Interestingly I am not getting
the automated health rollup for the Groups for their members and it is displaying in the Groups list in the console.
I have also tried creating a new DA with a single group in an 07 MP, and have the same issue. The sample MPAuthor.Stores management pack works as expected.

Similar Messages

Groups are not displaying in the user's member of tab

Hi ,
We have a issue,
After mapping any AD group in CMC,the groups and users are displaying in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
After restarting the CMS every thing works fine.
Every time after adding a new user we should restart the CMS, it is very difficult for us as number of users are working on this .
We are using number of AD groups.
Is there any resolution for this with out restarting the CMS.
Thank you in advance.
Environment -
BO XI3.1,
LDAP authentication.
Thanks & Regards,
Collin.

The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
Regards,
Tim

PreE V8: Clips not displaying in project view

I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?

I have been shooting in XP+ mode and have been for the past year.
I haven't tried using the Premier Elements Get Media function. I usually import both still images from one camera and the video from this camera at the same time into the same Photoshop album and use Organizer. Also there are some training videos and books that tell you to use Organizer.
I tried importing a video file using the Get Media function and was able to use the set in/out points and have them saved correctly.
Then in the project that I am working on I took one of video files that I imported through the Organizer and deleted it from the catalog. Then I imported it using the Get Media function and put it in the album with the other files. Then I used Preview to set in/out points. Those points were saved correctly.
So know I will delete all the remaining video files from the catalog that I haven't yet used in my project and then remote them through Premiere's Get Media.
So it appears that as you thought, I need to use Get Media to import video files. But that is not emphasized in any documentation. I think there should be a warning when importing video files in Organizer saying that if you intend to use Premier Elements to edit them that they should be imported via that product.
Thank you for your assistance.

Code not displaying in code view

When searching for a particular feature, I may have clicked on something by accident. Now, my site looks and works fine in the browser and in design and live view, but the code is not displaying in code view. See attached image.
Anyone know how to fix this??? Thank you in advance!

Have you tried restarting everything?

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

System not displying in graphical view in solution manager

Hello,
I added 10 system in solution manager for centralize monitoring but 8 of them are displaying in graphical views another 2 system are not displaying . all the systems adding procedure is same. but still 2 of them not displaying in graphical view can anyone tell me the chouses of this type of error .
Kindly guide me to short out this issue
Thank you
Deepak

Hi,
Open your Solution of the affected systems (12 Systems not appearing in your Monitoring). Go to Solution Landscape Maintenance (Under Solution Landscape).
Compare the Leading role of the solution with the role of the system in the logical component.
If these are different, right click on the system and select Put in Solution.
Hope this helps.
Feel free to revert back.
-=-Ragu

Renaming of distributed applications in widgets not working?

I have a strange issue with the renaming of distributed applications. i have read all the other issues that people are having with different locales on the server aswell as looking into the database it self from this blogpost:
http://scug.be/jan/2013/02/06/the-scom-group-rename-bug-demystified/
i have solved so that the name of the DA Changes in the distributed application state view but when i create a State widget and add the distributed application the old name is still there. i have tried clearing the cache by removing the registry entry, removing
the appdata catalog aswell as the /cleancache.
I have search the management pack aswell for the old name and no hits.
But still, no change. Does anybody have an idea where it gets the value of Object Display Name as shown in the screenshots?
The initial name was Test Name 1.0 and the new name is Test Name 2.0

There is one way thats probably not supported by MS and that is to find the DA in the tables in OpsMgr database that starts with dbo.MT_SC_<DA GUID>
Here is one column called DisplayName that the Widgets seems to get their DisplayName from. So changing this name should solve your problem but i have no guarantee on the impact of your SCOM installation.Example of a SQL Query from our environment:
SELECT
DisplayNameFROM[OperationsManager].[dbo].[MT_SC_cce80f3e17af4542beb89c218484d8c6_Service_3f3811bbd1074315bb303d6194899a2e]

Application Page list not displaying.

Application page list does not display when clicking on the application in application builder page. However if I type the application number and a valid page number in the URL I can access the application. All the pages work as well as the page editing.

Scott,
Well..it was the same issue as the Thistler..I replied to his posting and thought the threading would show that I was responding to his post. Anyway, it's okay.
I solved the problem. By flushing the shared_pool (alter system flush shared_pool;) Application Express now shows the Application Builder page.
The problem was that after logging in with a developer or administrator userid into the Apex 3.1.2.00.02 environment, clicking the Application Builder Icon resulted in a page not found error. However, you still could go directly to an application home page in the edit mode?(I don't really know how to describe it, it's the next page after selecting the application icon.)
the Metalink NOTE:469934.1 describes what to do to fix this, and it did solve my problem.
Thanks for your help
Lyle

Contact Person Relationship not displaying in webUI

Hi,
I am facing an issue while creating the Contact Person relationship in webUI. It is displaying in back end (GUI) drop down box, but its not displaying in web UI dropdown box. All other relationships are displaying well in UI.Please suggest to overcome this.
Bob

HI! Bob,
I am in a fix, actually i cant upgrade to sp004(presently in sp002) because it probably would also affect compatibility with other servers as i am using NWDI TREX IPC, so it is not posible for me to upgrade to SP004............
I am still looking forward if you can provide me any help in
If you require to see also contact person-relationships
in "Relationships", you need to eliminate the filtering in BOL
(class CL_BUPA_IL_RELATION->FILTER_RELATIONSHIPS). By creating a new
implementation class (i.e. ZL_BUPA_IL_RELATION with superclass
CL_BUPA_IL_RELATION) and entering this class in viewcluster
CRMVC_BUIL for external object BuilRelationship), you can redefine
method FILTER_RELATIONSHIPS and implement logic according to your needs
I am not able to apply the above solution, as FILTER_RELATIONSHIPS is a private method of the class CL_BUPA_IL_RELATION so how can i redefine it.
Please help me out.............
Thanks a ton
Mayank

Group Header not displaying on conditional suppression

I have a report that is used to audit controlled medications. It is grouped by patient and then by medication order ID. I only want to display the data when the patient has had their medication ordered more than once. I have a test patient who is not displaying on my report and I have figured out why, but no clue as how to fix it. Does anyone have any ideas? The reason why the test patient in question is not displaying is because they have three medication orders of different medications. Only one of these was ordered more than once. I believe my suppression formula is only catching the first medication order and since the line is never greater than one on that, his header won't display.... How can I evaluate all of his different medication orders?
IF distinctcount({ORDER_MED.ORDER_MED_ID}, {PATIENT.PAT_MRN_ID}) >1 then
   if count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1 then
      false
else
       true
else if
count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})<=1 then
        true

I think I just figured this out....
I added this to the group selection criteria...
count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1

In Solution Landscape Application Servers are not displaying

Dear All,
We are integrated SOLMAN (7.0 Ehp1) server with R/3 Dev,Qua,Prd servers but in DSWP >Operations>Solution Monitoring-->System monitoring / Administration .We can see the Dev,Qua,Prd servers but our requirement is under Dev server we have 4 application servers but those servers are not displaying.
Please suggest....
Regards,
Pavan.

Are these showing in SMSY
Please check SM51 in CI to ensure these are visible and reporting app servers
Please check in RZ20 in CI to ensure these are visbile and reporting data
Please check RFC connections to Solution Manager
Best wishes
Stuart

Application Icon are not displayed during Clickonce installation in WPF Application

During Clickonce installation of WPF application, Icon File(ico) is not displayed in the start Menu and installed applications list in control panel..
Default icon only gets displayed.
In my project
Already added ico file in the "Icon and Manifest" in Application Properties.
Please answer me how to show Application Icon in the Start Menu as well as in installed applications in control panel

Did you do this:
http://learnwpf.com/post/2012/07/09/Adding-an-Icon-and-File-Association-to-WPF-Clickonce-Applications.aspx
You also set the ico file as the project icon.
Since that's under the Icon and Manifest I guess you did that.
Also
The main window ought to have it's icon set to thee icon.
The main window is the first window you open - which of course may or may not be called MainWindow.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

Windows Phone application rating is not displaying

Hi Microsoft,
Our company has published an application in windows Store on 21st april 2015.
And many user have downloaded the application and many have rate it. But it is not displaying in the application page yet.
And I also checked with logging in Windows developer account. Still I could not see it.
Please provide clarification. From a developer side, do we need to do anything for displaying rating information?
Thanks
anoop m

No you don't need to do anything.
It could take some time to get your ratings display in the store. Also you will only be able to see the ratings from users in your region in the store. All ratings will only be visible in the developer center.
Wait for a week and if the ratings still doesn't show up, contact the developer support
here
Yea . Its already 3 days after a user Rated my app. Still not there under reviews section. Anyway I will wait.
Thanks
anoop m

RootUIElementContainer not displaying in outline view

Hi,
I am using EP 7.0 and NW04s.My problem is, once I am developing the webdynpro application, I created the necessary actions, Go and Back, the structure of my project is currently displayed in the Web Dynpro Explorer even thou the RootUIElementContainer in the Outline view is not displaying. So, I am not able to design the layout for the StartView or Resultview.Can any body give the solution to resolve this problem.
Thanks,
Kundan.

Hi,
After opening NWDS in Webdynpro explorer. Go to Window-> show view and select outline.
you will get the outline editor where you can desing the layout for the views.
hope it helps you.
Raghu

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

Distributed Application group relationships not displaying in health view (VSAE created management pack)

Similar Messages

Maybe you are looking for