Division cannot be carried out because divisor is zero - EA00

hi,
While doing EA00 transaction following error occurs:
During billing simulation, a termination occurs with message AJ020 (Division cannot be carried out because divisor is zero) or AJ097 (Unexpected termination in variant &1 in schema &2)
I gone through the note 402960
Note says, The termination can occur, for example, when
1) you choose pushbutton "Overall check" on the move-in screen,
2) the move-out date of a contract is equal to the move-in date,
3) one-day time slices are to be billed
The overall check in the move-in is called with a one-day time slice.That is, the move-in date is selected as the to-date.
Solution
Correct your billing schema.
Use IF nestings to make sure that only schema steps, which can also be executed with zero values, are executed. For example,a division by zero should be avoided.
My problem is I did not understood what exactly has to change in schema.pls help???
Regards,
Chetan

Can you mention the variant Program you are using on this step. The Divisor operand value seems to have become zero. You may need to check how this operand value is being populated.

Similar Messages

  • Account assignment cannot be carried out because of different origin no

    Hie Guru's
    While saving excise invoice (J1iiN) iam getting the below error
    Detailed Error Diagnosis :-
    Account assignment cannot be carried out because of different origin no.
    Message no. V1134
    Diagnosis
    The sales document to which you want to refer is based on sales document 10000003 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
    System Response
    This entry is not allowed.
    Procedure
    Enter the document and the item number of the preceding sales document.
    NOTE :- IT'S MTO SCENARIO. WITH REQ CLASS 040 (Consumption :- E)
    Thanks in advance,
    Denish

    Hie JP,
    This is not related to project at all. The stock is purely reseved for my sales order (and since my sales order is created with reference to quotation the stock is reserved for my quotation). While debug I found the route cause for this, if we see the function module "SD_DOCUMENT_ACCOUNT_ASSIGNMENT" (this FM is called at the time of quotation, sales order, stock taking, billing and excise invoice). Now in this FM :-
      CALL FUNCTION 'SD_VBAK_SELECT'
        EXPORTING
          i_document_number  = i_document_number 
      IF ( vbap-vbeln NE vbap-vbelv OR
           vbap-posnr NE vbap-posnv ) AND
           NOT vbap-vbelv IS INITIAL.
    The i_document_number found in my excise invoice is sales order nmbr. Thus vbap-vbeln NE vbap-vbelv condition in my IF loop gets satisfied (because vbap-vbeln = sales order numbr & vbap-vbelv = quotation numbr) and it goes further. THIS SHOULD NOT GO FURTHER.
    Like I said this FM is called at the time of billing also, so at that time the i_document_number  is quotation number thus
    vbap-vbeln NE vbap-vbelv codition does not satisfy (because vbap-vbeln = Quotation numbr & vbap-vbelv = Quotation numbr) and it doesnt fo further.
    I hope I am able to convay my message. Please do let me know if you find something regarding the same because this is a Std. FM which will be same for everybody.
    Regards,
    Denish Patel
    Edited by: denish__01 on Oct 12, 2011 9:59 AM
    Edited by: denish__01 on Oct 12, 2011 10:01 AM

  • The business transaction cannot be carried out. Message no. V1131

    Hi,
    We are getting this error Message no. V1131, The business transaction cannot be carried out, when we are canceling an invoice by the transaction VF11. The invoice was billed a year ago but we need to cancel however the FI document is not created correctly. We donu2019t really know where the problem is because in the description say:
    You cannot set the status in the sales document because of the current
    condition of the sales order. For example, you cannot complete the document until all corresponding deliveries have been invoiced.
    The sales order doesnu2019t have deliveries so It doesn´t make sense this error here. I have tested it with other examples exactly the same and everything works ok so it seems an error in only this sales order. I have executed these two reports (SDVBUK00, ZZFKREL0) to update the customizing and the status but the error still the same.
    Thank you and best regards.

    Hi,
    Usually this kind of problem is caused by the system status in items of previous sales order.
    The status unallows to release to accounting the billing document.
    Please also check notes regarding the system status relevant for CO object:
    580290   Checklist for results analysis
    548969   FAQ: Status of sales order results analysis
    Thanks,
    Alex

  • *The operation cannot be carried out with this node type*

    Hi Friends,
    My requirement is :
    PO in IS retail system--(IDOC ORDERS)--Sales Order processing-->Sales order in AFS system
    where AFS is apparel footwear solution used in retail industries.
    Now I have created PO in IS-retail system , and IDOC is successfully generated .
    After this I am checking this IDOC in AFS system thru  tcode BD87 for processing but getting error mesage in next screen when I am executing BD87 after putting the IDOC number.
    The operation cannot be carried out with this node type
    Message no. B1891
    Diagnosis
    Node types such as logical system, inbound and outbound IDocs or filter nodes are used only for the structure and for information. They cannot
    be used for processing and display functions.
    Any pointers .
    Regards
    Ashu

    a

  • The project cannot be checked out because the server is in read-only mode.

    Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
    not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

    Hi,
    I have a solution that might work for you, please follow steps below:
    1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
    2) While your project is being published and saved, open another window 
    Server Settings -> Manage Queue Jobs
    3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
     ( to view any error look at the last column of
    table on Manage Queue Job page)
    4) Also in your Project window see if the project is published and not saved as Draft.
    Basically this will give you a fair idea of your project being published or not.
    Regards

  • OS X 10.4.11 Unable to print photos. Error message, "There are no themes located. Until at one theme is istalled this cannot be carried out" Please advise. Thanks

    OS X 10.4.1 Unable to print photos. Error message appears, " There were no themes located. Until at least one theme is installed this cannot be carried out." please advise.

    Check out OT's post in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
    Also, note his comments here:
    http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
    > Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
    Regards
    TD

  • Help!!!!!! order cannot be carried out

    Hi all,
    I am trying to create a shoping cart with a shop on behalf ID and when I press the order button I receive the following error message:
    Line1: Partner Goods recipient not found
    and below that there is a warning message that says:
    The use of the last 5 characters in field CITY1 is restricted (38 of 40)
    Do you know what is wrong here?
    Thanks in advance!!!!!!

    Hi,
    Do you have a screen shot of the error ?
    Regards,
    Girish

  • ERROR: - NEW BOM EXPLOSSION CANNOT BE CAZRRIED OUT.

    Dear MM Gurus,
    I have created a BOM for material type FERT, assigning 2 ROH. When I am creating Subcontracting PO for that material.
    I click on the material item tab:
    Material master:  EXPLODE BOM
    The system is give an error message.
    New BOM Explossion cannot be carried out.
    Resolve the problem.
    Thanks & Regards,
    Manoj Kumar

    Hi,
    You should double check:
    The material master data of FERT's MRP1 view, do you assign the 30 -- Subcontracting to the field of special procurement type;
    The item category of subcontracting PO, it's L -- subcontracting, or not? If not, assign L in the PO.
    After that try again!
    Regards
    Tao

  • Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

    operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
    thank you!

    Hi Anne,
    Your version of Safari is still supported.  Please see Adobe Flash Player | Tech specs for supported OS and browsers.
    If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari.  This has nothing to do with whether or not Flash Player supports the browser.
    I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it."  Flash Player.plugin only works in the browser to view Flash content in the browser.  The plugin does not open files outside of the browser.  If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
    Google Chrome does embed Flash Player in it, while Firefox does not.   Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
    Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
    Maria

  • HT5621 I recently changed my apple id email from an old one to a new one and now I can't sign out of my old one on my iPhone 5 because it says I need a password. I cannot give that password because it is part of the old apple ID. How do I change IDs?

    I recently changed my apple id email from an old one to a new one and now I can't sign out of my old one on my iPhone 5 because it says I need a password. I cannot give that password because it is part of the old apple ID. How do I change IDs?

    Hi sharonpalencia, 
    Welcome to the Apple Support Communities!
    I understand it can be very frustrating when you cannot sign in, or sign out in this case, to your Apple ID. In this situation you may need to temporarily edit your Apple ID back to the original email address so that you can sign out. Once signed out, edit the Apple ID back to the new email address and sign in. Please use the attached article for further information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
    Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    If you're still asked for your previous Apple ID password, continue to the next step.
    Have a great day, 
    Joe

  • I cant figure out what is wrong i keep getting this an OIEception that says "{"The process cannot access the file because it is being used by another process."}

    I am trying to move a file from a folder to another folder.
    here is my code:
    //storage of the all files
    string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
    private void historyPictureBox_Click(object sender, EventArgs e)
    destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
    File.Move(folderContentNames[1], destinationFile);
    updateListBoxFileName();
    updateImageBox();
    each time I hit the bolded underlined part I get that error message.
    if you need anything else just ask.
    Thanks in advance,
    Thor Orb

    Hi Thor,
    If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
    string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
    string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
    File.Move(folders[1], desFile);
    In addition, the link below might be useful to you:
    # How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
    >> The process cannot access the file because it is being used by another process
    The message seemed that the file was opened in other process. Did you operate the file with other code?
    I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
    If you have any further questions, please feel free to post in this forum.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
    Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
    release the handle on the image, but I can seem to figure out have to use it correctly.
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Collections;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.IO;
    namespace Scanned_Picture_Ogranizer
    public partial class Form1 : Form
    //storage of the all files
    string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
    //List<string> folderContentList = folderContentNames.ToList();
    private List<string> folderContentList = new List<string>();
    Bitmap currentImage;
    Bitmap placeHolder;
    public Form1()
    InitializeComponent();
    convertingArrayToList();
    startUpData();
    string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
    string destinationFile = "";
    private void moveButton_Click(object sender, EventArgs e)
    private void startUpData()
    //placeHolder = new Bitmap(folderContentList[0]);
    //currentImage = (Bitmap)placeHolder.Clone();
    // Image loadImage = new Bitmap(pictureClones[0]);
    // currentFilePictureBox.Image = loadImage;
    int numberOfFilesLeft = folderContentNames.Length;
    foreach (string name in folderContentNames)
    fileNamesListBox.Items.Add(name);
    fileNameTextBox.Text = folderContentNames[0];
    numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
    ///loadImage.Dispose();
    //FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
    private void convertingArrayToList()
    foreach (string listName in folderContentNames)
    folderContentList.Add(listName);
    private void selectingImageFromListBox()
    private void updateImageBox()
    Bitmap currentImage = new Bitmap(folderContentList[0]);
    currentFilePictureBox.Image = currentImage;
    currentImage.Dispose();
    private void updateListBoxFileName()
    fileNamesListBox.Items.RemoveAt(0);
    fileNameTextBox.Text = folderContentList[0];
    // numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
    private void historyPictureBox_Click(object sender, EventArgs e)
    destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
    File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
    folderContentList.RemoveAt(0);
    updateImageBox();
    updateListBoxFileName();
    when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
    I just super confused, I would like your help on this.
    Thanks,
    Thor Orb

  • I cannot update an app because I used a different ID when I purchased it and I have no record of it. How can I find out the ID and password

    I cannot update an App because I used  an ID and password  to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?

    Try here > Associating and verifying email addresses with your Apple ID
    And here > Is there a way to find my Apple ID Name if I can't remember it?
    Frequently Asked Questions About Apple ID

  • HT5731 My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical  storage space.
    You need to delete content off of your iPad.
    https://discussions.apple.com/thread/5122738?start=0&tstart=0
    http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

  • Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..

    My problem is the power button cannot press...
    but I went to the shop
    Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..
    I think it's not fair for me,
    My iPhone never been soak the water before..
    I think I used it in Thailand ,, it's tropical weather...
    that's not my false ..
    so why i cannot change?
    Please tell me the good reasons.
    Thanks

    Here is the article about it:
    iPhone and iPod: Liquid damage is not covered by warranty
    Since we are all users here just like you, we can't do anything about decisions made by Apple.
    You'll have to pay for a replacement:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $229
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.
    Message was edited by: Ingo2711

  • TS3992 i cannot get into my ipad because icloud has me locked out because of no backup for two weeks?

    I cannot get into my ipad because icloud has me locked out because of no backup for 2 weeks

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

Maybe you are looking for