DME format tree - after test run, not displaying file.

Hi experts,
After creating DME format tree , I ran Test run for that. At that time for some format trees, it is displaying the file.
But for some of the format trees , while running test run , the file is not displaying.
Can any one help me out in this problem?
ur answers will be surely rewarded
regards,
uma

Similar Messages

Creation of DMEE format tree

Hi Gurus
I'm trying to create a new DMEE tree format (T.code DMEE) to include the basic details about the payments for PMW. I'm trying to copy a preexisting one and make necessary changes to get the required format. After this I will get the DME file at F110.
Please let me know if any one has created a new DMEE format tree, or changed the existing one like me. I really need some help in setting that up.
Thanks for looking
SK

I have created new formats, and i have done the data mapping for outgoing files as well, whats your specific question??? any way here is a link for the data mapping: http://help.sap.com/erp2005_ehp_01/helpdata/en/f4/b38e3c2936230ae10000000a114084/frameset.htm
RGS, assign point if its helpfull

Levels in DMEE Format Tree

Hi all,
I'm adapting a payment media format tree in DMEE. I want to send both domestic and foreign payments in the same output file. So I have started out with the format tree for domestic payments and then at the bottom of the tree I have added a segment group called "Foreign". This group has level 1 assigned to it. I have then added segments and segment groups under "Foreign". But when I try to assign a level higher than 1 to any of those I get the following message: "Incorrect level allocation in node xxx: level 002 comes after level 001. Can I only "branch" once in a format tree?
I want to generate a file that has one Sender record for domestic payments followed by several domestic beneficiary records. Then I want one Sender record for foreign payments followed by several foreign beneficiary records. Any idea how this can be solved?
Regards
Erik

Hi all,
I have a different problem with Levels in DMEE format tree. I have created a PAYM tree that has a header segment, below this is a batch header and - again below this - a segment for the individual payment. However, if I try to create a file it only gives me the header record.
Does anybody know what I have done wrong?
Thank you very much for your help,
Brigitte

How to compare versions of DMEE Format Tree in DEV, QAS and PRD

Hi,
Is there a way to compare version of the DMEE Format Tree in DEV, QAS and PRD? I would just like to ensure that version in DEV is in sync with the ones in QAS and PRD before I do my changes. It seems that Version Management of Transaction DMEE can;t compare the versions in the three systems. Thank you very much for your inputs.
Best regards.
Brando

Brando.
DMEE is a standard transaction which will be in sync with all the servers in your landscape unless there is any customisation done and the request is not yet moved.What problem are you facing when you are trying to do REMOTE COMPARISION ?
K.Kiran.

DME Format Tree is Saving Incorrectly

I am trying to create a new DME format tree, transaction code DMEE. I can populate the source fields but when saving or activating the format, entries on all fileds will be moved to the center of the fields. As a result these entries are not being recognised. For example if the file is be populated by a constant value like "SARS", I can enter that constant value as the source field. But if I activate the format this constant value changes to " SARS". Some spaces will be entered on the left.
Does anyone know what could be causing this?

Hi GT,
You can also copy the active Version of Existing DME and create a Z-DME so that if required you can use it in future.
For doing so,
1. go to T. code DMEE
2. Give the Tree type and Format Tree Name
3. Then click on the copy Button.
A Pop up will come. You can here give the Source and the Target Tree Name. Select the active Version for Source tree.
Then you can upload the Standard DME again. This will going to overwrite the existing Version.
Do not Forget to activate the DME once you upload the Standard DME again.
In the DME Details (T. code DMEE), you can see the last creation date, who has created the same and also the Last Change date and the Person who changed it.
BR
Amitash
Message was edited by: amitash shah

Updating DMEE Format Tree

Hi
I have one DMEE format tree under
Tree type ASLD but when I am running it and output is generating its showing as
where i want
<ZRVON type="jahrmonat"/> ==== yyyt mm
<ZRBIS type="jahrmonat"/> ===== yyyy mm
please help to change the same.
Thanks

closed

Generation of XML file using DMEE format tree

Hi Experts,
Can you please provide all the steps to generate a XML file using a DMEE format tree.
Thanks in adavance!!!
Regards,
Vishal.

Hi,
you can do it exaclty the same way like creating ordinary flat file.
You can find also some examples made by SAP. Search format tree with this pattern: XML

DMEE format tree

Hi,
I want to create a format tree from the DME engine. I have tried this but ran into errors. Can anyone send me the documentation regarding the DMEE format tree development. That would hugely be appreciated. Can you send it to [email protected]?

Hi,
Please write condition using condition argument.
Please follow the below steps:-
At attributes tab select DMEE: existence status of a format tree node as 2(Optional: if object has no value, object is skipped) and in mapping procedure select radio button Constant.
At Source tab provide constant as N06(as per your example).
At Conditions tab write a condition that if FPAYH-RZAWE = 'N'.
Copy the node for other payment methods.
Regards,
Anand Raichura

DMEE tree:it's possible to generate more files using one DMEE format tree?

Hello Expert,
I have a question and i need you help.
It's possible to generate two files with one DMEE format tree? If yes, how can i do it?
Thank you in advance.
Amal

In DMEE we define the structure ie the kind of feilds that needs to be populated.As far as my knowledge I think one DMEE tree can be used to create one file FORMAT
Thanks,
K.Kiran.

Visual Studio 2013 Update 4 - VSTest.console Output SDOUT Messages DURING Test Run, NOT After Test Run Completes

I am using vstest.console.exe and running a test from our internal CI build system, our internal CI build system requires console standard out to be updated at least every 30 minutes to
ensure that the process has not hung.
I am executing the following command using a customer logger and test settings files:
vstest.console.exe /testcasefilter:"TestCategory=LongTest" /settings:"C:\testing\CodedUI.testsettings" /logger:TRX /logger:CodedUITestLogger "C:\AppTests\CodedUITest.dll" /InIsolation
I have copied and modified the following custom logger(see
here for more info):
https://github.com/ppiotrowicz/AwesomeLogger
Such that after the test is executed the pass/fail/success information is printed to the standard out console.
Tests run: 1, Errors: 0, Failures: 0, Inconclusive: 0, Time: 00:00:87.9331298 minutes
Not run: 0, Invalid: 0, Ignored: 0, Skipped: 0
It's important to be clear that the test run takes 90 minutes, it's a long running test.
Time: 00:00:87.9331298 minutes
When the test run is executed for 90 minutes I see the following and our CI build system kills the process after 30 minutes of no output, so in the failure log I see:
vstest.console.exe /testcasefilter:"TestCategory=LongTest" /settings:"C:\testing\CodedUI.testsettings" /logger:TRX /logger:CodedUITestLogger C:\AppTests\CodedUITest.dll
Microsoft (R) Test Execution Command Line Tool Version 12.0.31101.0
Copyright (c) Microsoft Corporation. All rights reserved.
Running tests in C:\testing\bin\debug\TestResults
Starting test execution, please wait...
However I have a data-driven codedUI test pulling from a csv data source, that successfully executes, however the test takes 90 minutes to run....which means that for 90 minutes the console output displayed is only:
Running tests in C:\testing\bin\debug\TestResults
Starting test execution, please wait...
How can I have vstest.console output to standard out DURING the test run to the console?
Is there a way in the .testsettings file to enable more verbose logging
DURING the test execution?
In MSTest it was possible to use the parameter (/detail:stdout) which would display info while the test was running.
MSTEST /testcontainer:MyDllToTest.dll /testSettings.local.TestSettings /detail:stdout
Ian Ceicys

I ended up solving the issue for our internal CI system with the following threaded coded. I don't like that it just prints: CodedUI Test Run in progress. How can I query for a percent complete for test execution status or get a reading on the iteration
that's running for each row in the csv data source?
[Test, Category("RunCodedUITest")]
public void RunVsTestConsole()
//ARRANGE
var outputPath = "C:\Tests\bin\debug"
var codedUIAssembly = Path.Combine(outputPath, "CodedUITest.dll");
string output;
string codedUIAssemblyFile = @codedUIAssembly.ToString();
if (File.Exists(codedUIAssemblyFile))
//ACT
CodedUITestRunner codedUiTestRunnerObject = new CodedUITestRunner();
Thread workerThread = new Thread(codedUiTestRunnerObject.RunTest);
workerThread.Start();
while (workerThread.IsAlive)
TimeSpan oneminute = new TimeSpan(0, 1, 0);
Console.WriteLine("CodedUI Test Run in progress...");
Thread.Sleep(oneminute);
workerThread.Join();
Console.WriteLine("CodedUI Test Run completed.");
else
Console.WriteLine("ERROR: CodedUI Test Assembly file Does NOT exist @ Path : " + codedUIAssemblyFile);
Assert.IsTrue(File.Exists(codedUIAssemblyFile), "CodedUI Binary DLL exists!" + codedUIAssemblyFile);
public class CodedUITestRunner
// This method will be called when the thread is started.
public void RunTest()
var outputPath = "C:\Tests\bin\debug"
var codedUIAssembly = Path.Combine(outputPath, "CodedUITest.dll");
string output;
string codedUIAssemblyFile = @codedUIAssembly.ToString();
output = TestFrameworkHelper.Exec("vstest.console.exe", string.Format("/testcasefilter:\"TestCategory=LongTest\" /settings:\"C:\\tests\\CodedUI.testsettings\" /logger:TRX /logger:CodedUITestLogger {0}",
codedUIAssembly), WorkingDir: outputPath, RequestEC: false);
StringAssert.Contains("EXIT CODE: 0", output, "Exit code was not 0.");
Ian Ceicys

WMF format equations available/missing fonts not displayed/alerted

WMF format equations fonts are not displayed in the applications, If any fonts used on that equations is missing in the system the indesign will not show/alert any missing font warring to the user and the substitute fonts replaced automatically for the missing fonts, Because of this the output PDF comes with wrong fonts. How to fix the equation font missing issue in Indesign.
Your suggestions are welcome.
Required Details
Indesign CS5.5
OC - Windows XMP
Equation Software : Math type
Format: WMF

Best practice would be not to use WMF at all in InDesign.
WMF cannot embedd fonts, so the second best practice would be to use a WMF without live text.
Best would be to use ai or pdf files.
What other format can Math Type export?
// I did have a look on Softonic's web site. They write that Math Type can export EPS. Use that!
/// If you have also font embedding problems with EPS take care that you use fonts which allow embedding (not every font does) and put the EPS in the Distiller with some kind of setting without color conversion and make a PDF of it, then use this PDF. The PDF should be dcreated on a computer with the same fonts available which you have used with Math Type.

Lion finder window not displaying file info

I have a MacPro which I've updated to Lion. I have four hard drives installed. When I open a finder window from three of the drives, I get the expected (from Snow Leopard) behavior: in icon view, images display pixel dimensions, movies or audio files display run time. This is assuming I have Show Item Info clicked in the View Options. But if I open a finder window on my start-up drive the file info is not displayed. If I open the View Info panel and click/unclick the Show Item Info ckeck box, I can see space expand or contract beneath the file, but no info is displayed. Is this a bug or a "feature"?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Finder 600 error/not displaying files

Finder giving me a 600 error, if it opens it won't display files, especially those on a network hard drive. It will let me see most folders though, again, if I can get past the 600 error. iTunes stopped working for a while but the second I clicked into these forums it worked!
I've seen some similar threads but they didn't fix my issue. FYI I'm running the latest OS.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

MSTest Coded UI Test Could not load file or assembly Microsoft.VisualStudio.TestTools.UITesting

Hi,
I have created some Coded UI Tests in a Test Project using Visual Studio Premium 2013 (Version 12.0.30723.00 Update 3).
Those Coded UI tests run just fine when I run them from inside Visual Studio (Go to Test Explorer and hit Run).
However If I try to run them using MSTest.exe or VSTest.Console.exe I am not able to.
When I run the tests using MSTest I get the following error:
Loading CodedUITests.dll...
CodedUITests.dll
Unable to load the test container 'CodedUITests.dll' or one of its dependencies.
Error details: System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot
find the file specified.
If I run them using VSTest.Console.exe I get the following error:
Starting test execution, please wait...
Warning: Unable to load types from the test source 'C:\PathToTestProject\bin\Debug\CodedUITests.dll'.
Some or all of the tests in this source may not be discovered. If you are running unit tests for Windows Store apps and referencing custom WinMD type then please visit
http://go.microsoft.com/fwlink/?LinkId=238340 for more info. Error details: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0,
Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified..
Warning: No test is available in CodedUITests.dll. Make sure that installed test
discoverers & executors, platform & framework version settings are appropriate
and try again.
I try to find this issue online and was not able to find anyone with a similar problem.I am not sure if there is something corrupted with my VS
instalation that may be causing this problem.
Could someone help me with this?
Thanks!
Brazeta
PS: This path "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\PublicAssemblies" exists in the machine where I have VS and where I am executing the MSTest command. This path contains all the Microsoft test assemblies, including "Microsoft.VisualStudio.TestTools.UITesting.dll"

Hi Edward
>> Do you mean that Coded UI tests run fine in VS, but failed with MSTest?
Yes, that is exactly the case!
>>Before you run with MSTest, have you changed the Coded UI project?
No. In Visual Studio I can run the Coded UITests by going to Text Explorer and click the run button. Without changing anything else, if I try to run them in using mstest or vstest.console I am not able to
>>Did you change the project after you run in vs?
No. The project did not change at all
>> Could you share us the MSTest command?
I run the commands in "Developer Command Prompt fro VS2012". the commands are:
MSTEST:
mstest /testcontainer:CodedUITests.dll
Microsoft (R) Test Execution Command Line Tool Version 11.0.50727.1
Copyright (c) Microsoft Corporation. All rights reserved.
Loading CodedUITests.dll...
CodedUITests.dll
Unable to load the test container 'CodedUITests.dll' or one of its dependencies.
Error details: System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannotfind the file specified.
VSTEST.CONSOLE
vstest.console CodedUITests.dll
Microsoft (R) Test Execution Command Line Tool Version 11.0.60315.1
Copyright (c) Microsoft Corporation. All rights reserved.
Starting test execution, please wait...
Warning: Unable to load types from the test source 'C:\MyProjects\CodedUITests\bin\Debug\CodedUITests.dll'.
Some or all of the tests in this source may not be discovered.
If you are running unit tests for Windows Store apps and referencing custom WinMD type then please visit
http://go.microsoft.com/fwlink/?LinkId=238340 for more info.
Error details: System.IO.FileNotFoundException:
Could not load file or assembly 'Microsoft.VisualStudio.TestTools.UITesting,
Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
The system cannot find the file specified..
Warning: No test is available in CodedUITests.dll. Make sure that installed test
discoverers & executors, platform & framework version settings are appropriate
and try again.
Information: Additionally, you can try specifying '/UseVsixExtensions' command i
f the test discoverer & executor is installed on the machine as vsix extensions
and your installation supports vsix extensions. Example: vstest.console.exe myTe
sts.dll /UseVsixExtensions:true
>>Have you set the platform (x64 or x32) in your test? If so, I think you could refer the link below:
The selected platform is AnyCPU
>>Was your UITesting in another dll? If so, you could refer the link below:
The tests are all in the CodedUITests dll. All tests were created inside a test project (called CodedUITests, they run ok if I execute them in VS but the show the abouve error if I run them using the Developer Command Prompt for VS2012).
I didn´t mention this before but I DO NOT have test controller and test agents installed in my PC! I just have Visual Studio installed (not 100% sure if I need the agent to run the UI Tests in the same PC where I have VS installed).
I hope this information may be usefull,
Best Regards,
José Brazeta
PS:
I just try to create a very simple UI Test in another PC where I have Visual Studio 2013 Ultimate (Versio12.0.30723.00 Update 3).
Using VS I created a new Solution with just 1 project (Coded UI Test Project) and recorded a very simple test (on IE and at the google page search for Coded UI Test and hit the search button).
After compiling the Coded UI Test project in VS I can see the test in Test Explorer and If I run the test it all goes ok.
Using the Developer Command Prompt for VS2012 if I navigate the the "Debug" folder of my project none of the following scripts will work:
mstest /testcontainer:CodedUITestProject1.dll
vstest.console CodedUITestProject1.dll
I get the same error that I show in the bigining of this post.

How to to not display file attributes in file explorer

Hi All
Being new to windows mobile, I am still struggling to set up my new treo pro
Palm OS just seemed to make more sense!
The fonts are two small, the lists too long etc.
My current problem is viewing the MP3's on my SD card.
File explorer shows me not only the name of the file but also the attributes.
As a result the name is not display fully, which is problematic if the track has a long name and you have several tracks by the same artist.
I tried finding on option for customizing the view but could not
Help anyone?
tnx
Ykottler
Post relates to: Treo Pro T850U (Unlocked)

I looked for a setting for that but cannot find one.
You may want to try the program in the following link.
http://mobilitysite.com/2008/07/resco-file-explorer-2008/
For reference purpopses click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treopro/t850una_unl/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

DME format tree - after test run, not displaying file.

Similar Messages

Maybe you are looking for