.dmg mount disk failure

hello - all of a sudden, I can't mount any .dmg files- after I download them, it says mount failed in Safari. I've tried using disk utility and it says device not configured. This happens with every .dmg file- even ones I previously had no problem with. Can anyone help? Thanks!-jeff

First thing I'd try, Michael, is to boot up from your iMac or Tiger DVD and then run Disk Utility from the "Utilities" menu.
Now select your HD and "Repair Disk", then repeat the process selecting "repair permissions" instead.
If this doesn't work I'd download the Combo 10.4.6 updater for PPC Macs from http://www.apple.com/support/downloads (its a big download, I'm afraid - around 140 Mb , but still much easier than doing a complete Archive and Install) ) and run this. Often running the Combo updater will resolve problems that have occured after updating using Software Download.
Cheers
Rod

Similar Messages

.dmg backup file will not mount. Failure not an option.

Let me begin by saying that my lovely wife is, for good reason, currently not very happy with me. Allow me to explain...
I recently decided that it was time to upgrade her iBook G4 from Tiger (10.4.xx, not sure what it was exactly) to Leopard. Her system easily meets the requirements and she would benefit greatly from being able to use Time Machine as a backup solution.
I figured that the first step should be making sure that her existing data was properly backed up and could be selectively restored after the installation of Leopard was complete. I could have performed an Archive Installation of Leopard, but she had data files and folders all over the drive and I felt that a clean installation would be best. So anyway, I booted the system with the Leopard install disc and used Disk Utility to create a .dmg backup of the one and only partition on her hard drive. I used all of the default settings for the creation of this .dmg and saved it to my external USB hard drive which is formatted as a Mac OS Extended volume. Disk Utility gave me no errors at all and the image creation seemed to complete successfully.
With that first step complete, I shut the system down and disconnected the external drive (just to be safe ya know). I, once again, booted the system with the Leopard install disc and "Erase"d the hard drive, created a new Mac OS Extended (Journaled) partition and proceeded with the Leopard installation. Once the installation completed, I ran Software Updates until no more updates were available and I was all the way up to 10.5.5. So far, so good.
With Leopard now installed and fully updated, I connected my external hard drive to the system, transferred my .dmg file to the desktop and attempted to mount the volume so that I could begin copying my wife's data to her Home folder. However, when I double-clicked the .dmg I received an error stating that the image failed to mount and gave a reason of "no mountable file systems".
Now before I go any further, I want to stress that my wife's entire digital life is contained in this disk image. She owns her own business and all of the critical data associated with her business is in there. Financial data, several years of tax information, business contacts, many months worth of email... everything. So needless to say, when I saw that error from DiskImageMounter pop up, I immediately felt a little sick to my stomach. Before anybody asks, I have no idea why I didn't test the image file before erasing the hard drive. I should've, I know that, I don't want to talk about it.
I spent the next 4 - 5 hours desperately trying anything I could think of to get access to the data within this .dmg file. I made a copy of it right away so that I wouldn't inadvertently make the situation even worse. I then tried to use Disk Utility to Restore the image, but received an error stating that the image contained an "Unrecognized Filesystem". I get the same error when I try to either verify or repair the volume with Disk Utility. I tried to attach the image using hdiutil in Terminal but got the same "no mountable file systems" error that I got from DiskImageMounter. I have tried to mount the image with Toast and Mount Me! as well with the same results.
Here's the hdiutil imageinfo that I get from the dmg:
Format: UDRW
Backing Store Information:
Name: Macintosh HD.dmg
URL: file://localhost/Users/barkingshins/Desktop/Macintosh%20HD.dmg
Class Name: CBSDBackingStore
Format Description: raw read/write
Checksum Type: none
partitions:
appendable: false
partition-scheme: none
block-size: 512
burnable: false
partitions:
0:
partition-length: 53948417
partition-synthesized: true
partition-hint: unknown partition
partition-name: whole disk
partition-start: 0
Properties:
Partitioned: false
Software License Agreement: false
Compressed: no
Kernel Compatible: true
Encrypted: false
Checksummed: false
Checksum Value:
Size Information:
Total Bytes: 27621589504
Compressed Bytes: 27621589504
Total Non-Empty Bytes: 27621589504
Sector Count: 53948417
Total Empty Bytes: 0
Compressed Ratio: 1
Class Name: CRawDiskImage
Segments:
0: /Users/barkingshins/Desktop/Macintosh HD.dmg
Resize limits (per hdiutil resize -limits):
53948417 53948417 53948417
I'd be happy to provide any other information that anyone thinks might be useful. I'd also be willing to bring the image file to a professional data recovery center and would welcome any recommendations that you might have. As I state in the subject of this post, failure is not really an option and I owe it to my wife to do everything humanly possible to try and arrive at a favorable resolution to this situation.
The thing that's really prevented me from getting a proper nights sleep for the last two nights is the irony in blowing up her data while trying to get her set up with a decent data backup solution.
Thank you to anyone who is able to help.

Whatever you do do not throw out the disk image. Most likely this is a permissions/user account error involving how the disk image was made.
Try mounting it manually using the Terminal by typing the following into the application:
          hdiutil attach
Ensure there's a space after "attach" and then drag the disk image to the terminal window, which should complete the full path to the disk image. Then ensure there's a space after the disk image path and type "-mount" so the whole command looks something like this:
          hdiutil attach /path/to/file.dmg -mount
Then press enter and hope it attaches. If an error occurs, try the command again with "sudo" in front of it as such:
          sudo hdiutil attach /path/to/file.dmg -mount
Enter your password when prompted and hope that works.

Dmg files won't mount, Disk Utility/Toast won't launch?

Hi folks,
I've just joined your fine community in search of help with my problem that I see on Google pops up on boards frequently... but no suggestions have helped me yet...
In a nutshell, if I download any dmg file, eg. Apple updaters, they won't open - the error dialogue is something like "failed to open, no mountable file system". This seems to be an underlying general error, as I also can't launch disk applications like Disk Utility and Toast. They just bounce in the dock and then quit.
I have:
- rerun the 10.4.4 combo installer
- done /sbin/fsck -yf at startup - all reported ok
- booted from and run Disk Warrior - all reported ok
- booted from and run Techtool Pro - all reported ok
- switched to another user account.
And the problem with dmg and Disk Utility/Toast persists! In all other respects, the Powerbook G3 (576mb/80gb) is running fine (apparently).
Hope someone can help
B
Powerbook Mac OS X (10.4.4)

I just went thru a simular problem. A couple of things to try.
Boot of your install disk and ignor the install window and open disk utility from the menu at the top. you are running off the o/s on the disk an not the hard drive. You can repair permissions and the Hard drive because you are now working off a different filesystem.
If that doesn't work do a rinstall from the install disk but when you get to the window that has an "options" button select it (you may have to) and instead of doing a full install. Uncheck all boxes. This way it does not reinstall fonts etc.
You will not lose any files or programs or have to reinstall them. You might have to reinstall devices that have special drivers like printers that came with an install disk etc.
You will revert back to the origional ver like 10.4.1. just go to apple update and let it do its thing.
Good luck

Problem in recovery from RMAN backup in case of disk failure

Hi
I have Oracle 9.2.0.1.0 on Windows. Full Hot RMAN backup of database is scheduled on daily basis. I am taking backup on disks. And then i do manually copy them on tapes. If any disk failure occurs than can i recover database completely in this scenario. If tried restoing that backup on different machine as given below
set ORACLE_SID=<name>
rman target sys/<pwd>@ORACLE_SID nocatalog
startup nomount
restore spfile
create pfile from spfile
startup nomount pfile
alter database mount
restore database
Everything worked fine till above steps. Now i will execute last step.
recover database
Here it gives error:-RMAN-06054: media recovery requesting unknown log: thread 1 scn 264750
Still i typed
alter database open resetlogs
Now i can open my database, But is it recovered completely? Or there is loss of some data? Why it is giving this error?
Thanks in advance. Waiting for reply.

I can understand the confusion with this whole concept.
What I meant by all archivelogs is all the archivelogs that were backed up with the backup itself. Again, it is essential to ensure that you archive the current redo log AFTER the backup is performed and then back those archivelogs too. Good thing is, RMAN will take care of this for you if you backup the archivelogs with the BACKUP DATABASE command and/or backup the archivelogs AFTER you run the BACKUP DATABASE command.
Once you've mounted the controlfile and CATALOG the archivelogs, you can go into SQL*Plus and issue the following query:
select SEQUENCE#, FIRST_CHANGE#, NEXT_CHANGE# from v$archived_log
order by FIRST_TIME;This will tell you what archivelog is the latest. Logs generated during the backup may also provide the necessary information. Performing Disaster Recovery should help to understand the full process.
The ONLINELOG directory in FRA is only populated if you've configured your redo logs to be stored there. However, you are on 9i...right? If so 9i doesn't utilize a FRA.
HTH
Edited by: ebrian on Oct 3, 2008 1:08 PM

Not opening window of mounted disk image

I have created disk images of my CDs with Disk Utility and have them mounted on startup by having them in my Login Items. But each .dmg after mounting opens the Finder window for that mounted disk. I do not want the window opened. Only the disk image mounted. What did I do wrong? Thanks.
Dual G5 Mac OS X (10.4.8) Mirror dual G4, iBook 12, iBook 14, Beige G3

Open the Script Editor in the /Applications/AppleScript/ folder and paste in the following:
tell application "Finder"
delay 1--time in seconds
close every window
end tell
To close a specified number of windows:
tell application "Finder"
delay 1--time in seconds
repeat 1
close window 1
end repeat
end tell
In either case, save the script as an application and add it to the list of login items for your account. The delay in the second line of the script may need to be increased.
(19717)

When I attempt to re-download Lion to my MacBook Air I get the following error: localhost Install Mac OS Lion[436]: Retrying pisa://1183a0570:::/InstallESD.dmg after 1 failure(s). I am trying to re-install the OS after erasing having erased the drive.

When I attempt to re-download Lion to my MacBook Air I get the following error: localhost Install Mac OS Lion[436]: Retrying pisa://1183a0570:::/InstallESD.dmg after 1 failure(s). I am trying to re-install the OS after erasing having erased the drive. Any ideas?

I had the exact same issue; Lion recovery from Command + R would hang with the logs showing the same message. To resolve, I used Disk Utility to remove the recovery partition. My Air then used Internet Recovery to load all the tools. When using Reinstall via Internet it worked just fine.

Toshiba Satellite L650-07U, Hard disk failure and replacement

Hi all,
I have Toshiba Satellite L650-07U Laptop, Model: PSK1EC-0700Q with 4GB RAM, 650GB HD, Windows 7 Home Premium installed. At the time of first use, i made Recovery DVDs which took 4 blank DVDs using Recovery media creator.
From 2 weeks it is giving problem, at start its slowdown with every application, then suddenly it started Hard disk failure error and ask to backup important files. From that instant i did all my backup save in another portable Hard drive.
I had hiren boot CD, and ran RAM test and found it OK, and then run Hard Disk test and found few bad sectors at few certain point, As 650GB Hard disk was taking alot time of time for checking bad sectors, so i stopped that application.
First I tried Recovery DVDs to restore Windows, but it failed as Laptop DVD-Writer was unable to boot from those created DVDs (DVDs are OK as had checked it on Desktop computer DVD-ROM), Laptop DVD-Writer is also working as I test few more bootable CDs and it booted perfectly, but it is not booting from Recovery DVDs.
Than i tried to restore from Recovery partition using Factory restore settings, it erases all data and reinstall new and fresh copy of Windows 7 Home Premium. It works fine for few hours than again pops up Hard Disk Failure message again and again. I searched here in Toshiba Forum and have found similar problem with other members and finally decided that it need to replace Hard Disk with new one. As It is now two and a half month old, thats why i need to buy new Hard Disk for my Laptop.
I checked all partitions of drive using Hiren Boot CD, and had found that there are four default partitions in Toshiba original laptop drive,
One hidden partition of 1.5 GB
One hidden partition of almost 21 GB
One hidden partition of almost 12 GB
One partition of 561 GB, which was the original partition where windows 7 was installed along with all of my Data.
Now I want to replace faulty drive with a new one and have a lot of question in my mind which I need to share with you guys.
At the time of first use I installed Windows 7 64 bit edition, and made Recovery DVDs, and at second time of restore to factory setting I had installed Windows 7 32 bit. I have confusion about recovery DVDs (which is not booting from default DVD-Writer of Laptop), either it has 64 Bit recovery data or 32 bit? Or have both 64 and 32 bit Data.
Toshiba restore to factory setting without using any recovery DVD/USB is the best possible way to restore Windows 7, How can I make same recover hidden partitions from original/faulty hard drives to new hard drive partitions? Is this possible and how?
On Default hard drive there was one partition of 561GB instead of two or more partitions. Is this possible to split partitions in new hard drives instead of one big partition?
As Recovery DVDs are not able to boot from laptop default DVD-Writer, is it possible to open those DVDs on another System and copy tem in USB drive and use it for booting? If it is possible than please show me the steps for making bootable USB from these Recovery DVDs.
Thanks,
masterleous
Solved!
Go to Solution.

Satellite L650-07U (PSK1EC-07U00Q)
This site is for US computers. I doubt you'll get your questions for that Canadian model answered here.
There appear to be two recovery partitions. Maybe one for 32- and one for 64-bit Windows. Or maybe one is for English and the other for French.
Your User's Manual isn't much help either. You probably need to ask Toshiba tech support in Canada.
About all I have to offer is this: Be wary of drives with advanced-format technology. See my message about that.
-Jerry

Problem writing external file to externally mounted disk in Windows

Folks,
I've got a puzzling problem with a simple OWB mapping where I'm dumping the contents of a table to an external file.
Versions are OWB v 11.2.0.2 64-bits on Oracle RDBMS 11.2.0.2 Windows 2007 64-bits Enterprise Server.
When the external files module is hooked up to a location that points to a local disk and directory on the OWB-server, everything works fine - files are created and written.
When the external files module is hooked up to a location that points to a mounted disk on another Windows 2007 64-bits Enterprise Server, I get +"Invalid Path for target file, check if connector is deployed correctly".+
The "File System Location Path" in OWB is set to "N:" (no slashes either way). "Test Connection" reports OK.
I've given both the Oracle os-user and "Everyone" (for good measure) all rights on the mounted disk, and I can see that the generated package code is using the correct Directory, and the Directory Path is the correct one on the server. The mounted disk (N:) should appear as a local disk to Oracle as far as I can see. I'm able to create and delete files on the disk using command line on the OWB/DB-server.
I'm scratching my head on this one....

then mapped that share as a network drive (N:) on server A (the OWB/DB-server)I think that problem was with different accounts used for run Oracle database (usually database instance run under SYSTEM account) and which you used to map share (it was interactive session). Even when you made this map persistent (enable "Reconnect at logon" option during mapping) you don't grant access to this drive to other accounts (including SYSTEM ) - this drive will not be visible to other users.
I think it is possible to create "persistent" network drive mapping for Oracle database context with specification non-SYSTEM account (domain or server local) for running Oracle database instance (and Oracle Listener service).
Also it seems there is a workaround to access mapped network drive under SYSTEM account:
http://stackoverflow.com/questions/182750/how-to-map-a-network-drive-to-be-used-by-a-service
Regards,
Oleg

IMac 27'' mid 2011 hard disk failure with FileVault 2

Hi,
Recently I had had some troubles with my iMac and everything is pointing out to the hard disk.
2 weeks ago I rebooted the iMac and i lost all my data because of a hard disk failure. The disk just got corrupted according to what i could see. From there, i had a lot of troubles trying to reinstall the last version of OS X (10.8). I indeed formated the disk and i even securely erased it. When I tried to reinstall it from external HD or from a USB key i usually (not always) got error in the final steps of installation. However, if i use the Recovery partition to install from Internet i ain't got no errors.
With OS X already installed, i also tried to encrypt the disk using FileVault 2 and i got an error again. This time, when 2 hours left to finish the encryption. Specifically this error: https://discussions.apple.com/thread/4218952?start=0&tstart=0 (Trying to encrypt but it always fails). It seems to be a common error which a lot of people is suffering, but i still don't know if my case is a hardware problem or, on the other hand, a software error.
I carried the iMac to the tech support in my city and they discarded a hardware problem. They gave format to the disk and installed OS X with no problem, so they told me to check if the iMac keep spitting some error or just it has any anomalous behavior. Actually it seems to run fine, no errors yet excepting FileVault 2, which is generating the same error.
I have always used FileVault without any kind problem (in all my macs, including this one), so could it be a Mountain Lion issue?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command.
Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem.

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Music Files Deleted After Hard Disk Failure and First Sync After Hard Disk

Hi,
I recently had a hard disk failure and lost all of the data on my hard drive. I replaced the hard drive and reinstalled all of the software including iTunes. I am running Windows XP Home. The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes and since iTunes had no music files it deleted all of the music files on my Nano. How do I get them back and why on earth would iTunes do such a stupid thing??? My Nano contained many songs that I bought from iTunes and I want to get them back. I have found some third party software that will undelete the deleted files but it costs $69. I don't feel that I should have to pay to correct a defective feature in iTunes. Does Apple have an undelete utility? Can I redownload the songs that I purchased from iTunes?

*The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes*
When you connected did you get a message that your iPod was linked to another library, and then press Erase and Sync? When an iPod is set to update automatically and you connect to a computer with an empty iTunes and accept the message above it will erase the originals completely (as you have discovered). Also as you've seen, none of the recovery programs are particularly cheap so you have to decide if in your particular circumstances it's worth it to get your songs back. It may be if you have a lot of purchased tracks which you will have to pay to download again. If they came primarily from your CDs then it's most likely not as you can re-rip them.
*Can I redownload the songs that I purchased from iTunes?*
If you didn't make a back-up of your purchases to restore from then I'm sorry to say that the policy on lost purchases is that you have to pay to download them again:
"Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage." iTunes Store: Purchased content can be downloaded only once
You could try contacting the iTunes Music Store Customer Service and you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on any of the links on this page you'll find a space at the bottom to email your query: iTMS Customer Service

Satellite A215-S7414 Hard Disk Failure

Hi. I purchased my laptop 16 months ago and this is the third time I have had hard Disk Failure. The first two times were in the first year and I received a new harddrive after sending it in to Depot for repair. Here we are the Third time and now Im outta warranty and apparently outta luck. Here are my many questions, first of all I didnt have the opportunity to back anything up, so if I were to replace the Hdd on my own, does that mean I would also have to purchase a new Vista package? Also, I have a Western Digital External harddrive that Im not using.....would that be of any assistance to me in trying to recover anything from the laptop?
Everyone tells me it is cheaper to just get a new one, but that isnt practical and I dont want to just trash a laptop that is only 16 months old.
Please help
Thank you
Model #PSAFGU0IU002

I'll try to answer the questions you've asked. First, you don't need to buy a new Vista package. You should call Toshiba customer service at (800) 457-7777 and order a set of recovery disks for your notebook. They will want the serial number and a credit card to cover the shipping and handling ($19.95 standard, $24.95 overnight). The recovery disks will restore the system to 'as-shipped' condition with all of the appropriate drivers and utilties. You can purchase a replacement drive reasonably from any number of sources. Replacing the hard drive is straightforward. You would remove the cover from the bottom, slide the drive out and transfer the hard drive 'caddy' to the new drive. Slip it in, boot from the recovery disks and away you go. You could install the old drive in an external USB housing and see if you can recover anything from it. I can't think of a role for your current external drive other than as additional storage.

G72 Hard Disk Failure and Replacement

I have had a HP g72 laptop for just over two years. Within the first year, right before the warranty expired, I had a charging issue that was resolved under warranty. Last year, I began to get warnings on startup that I had an imminent hard disk failure. I backed up most of the important things on my computer and kept using. Finally, it seems that my hard drive has failed for good. I have tried to restart my computer about 10 times and everytime I get the same message: insert boot disk and press any key. I am contemplating replacing the hard drive instead of the whole computer, but I am not sure what I need to do. Also, if this is such a problem, why hasn't HP done anything to fix it. It has been so frustrating with my HP laptops that I am considering going to another company. HELP!

Hard drives fail. That is why backup is so critical. HP does not even make hard drives so I am not sure what they could do to fix the general issue that hard drives are about the most fragile piece of technology that most people encounter.
You can get a replacement hard drive for under $75. This one would be good:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822145455
Here is the Manual:
Manual
Hard drive replacement instructions start on page 4-8.
Did you make recovery disks? If not we can direct you to a place to download a Windows 7 image to use with your Key Code to replace your software.

A10 Hard disk failure and replacement - How do I use Recovery Disks?

I have a Satellite Pro A10 which has suffered a hard disk failure. I have replaced the hard disk drive (with a non-toshiba drive) but cannot load the operating sysytem etc from the recovery disks supplied with the computer when new. When starting the computer up with recovery disk No 1 in the CD drive I get the message "Invalid system disk, Replace the disk and then press any key" Any suggestions as to the remedy would be most welcome.

Hello Tony
Please check at first if your new HDD is properly recognized by BIOS. It yes you should prepare the HDD for installation. I recommend you to use some tool and make a partition on new HDD. If you want you can format it before you start the installations procedure.
I am pretty sure that after that the recovery installation can be done successfully.
Bye

Hard disk failure imminent

I have a Pavilion 1400-Z desktop. It was purchased last November. I have only had it for 2 months. Now everytime it reboots I get an error message about an imminent hard disk failure. It says in a message after I login that the hard disks reporting failure are volumes C:\,D:\
These are both partitions set up in single 500gb drive that were set up as part of the factory install.
Is there anything that can be done other than replacing this hard drive?
Obviously it is still under warranty. If replacement is the only solution, how do I go about getting the process started. I've barely gotten to use my new computer and it is already failing.
Failing Drive SATAO
Failing Attributer: #05
I am very disappointed that I continue to have hardware problems with factory installed HP components.

Since your computer is still under warranty, your best bet is to contact HP Customer Support and start the troubleshooting / repair process.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

.dmg mount disk failure

Similar Messages

Maybe you are looking for