DNS caching problem when configuring Windows clients for SCAN

I have a Windows 2008 R2 server running apps that connect to a RAC cluster database using the SCAN address. The SCAN address however always returns the same IP when you ping it from that server. If I flush the DNS cache I get a different address, but again the same one all the time. I believe this is caused by the fact that DNS caching is enabled on Windows by default. This has caused problems when one of the RAC nodes goes south and the cached SCAN IP is not responding. The applications lose their connections, try to reconnect, but can't because they keep using the same dead SCAN IP.
I suggested we disable the DNS Client service on those machines so that the SCAN name correctly cycles through the addresses but the Windows admin says not to do this. Is there a documented practice somewhere that this is OK to do for Windows RAC clients? Or is there a way to disable caching just on the SCAN name but leave it enabled from every other host name?
TIA

What happened was the SCAN VIP did not fail over. The node VIP did not fail over. The database instance was running but I could not connect to it even locally as sysdba. I got the message "protocol adapter error". This normally only occurs on Windows for local connections when either (a) the Oracle service is not running, or (b) you didn't set the ORACLE_SID variable correctly. Neither was true.
I tried "crsctl stop crs" but it could not stop the listeners.
I rebooted the server. During the reboot, neither the VIP no SCAN VIPs failed over. It's almost as if CRS either didnt recognize tat the other node had been shutdown, or it didn't care.
I have never seen this happen before.
For the record this is Oracle RAC 11.2.0.1.

Similar Messages

Has some problems when configuring windows authentication in IIS 7

Recently I'm working on a project. This project is deployed on Windows server 2008 R2 and using IIS7.
It's using classic ASP, not ASP.NET.
In this project we want to use Windows Authentication for application login and SQL connection.
The problem is when we enable Windows Authentication, the application can't connect to the SQL server. The error message said " Login
failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.". If we enable Basic Authentication the application will use the current logon user to connect the SQL server.
The expected result is after the Windows Authentication is enabled, when somebody logon to the application, the application will use the application pool account to connect to the SQL server not the current logon user or anonymous user.
Does anybody has any idea about this?
Jacob.Gu

Hello Jacob.Gu,
This forum supports .NET installation not IIS setting, please reopen a new post on the following forum:
http://forums.iis.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

Windows client for ARD?

I'm looking in to how to establish a remote desktop connection from Windows to Macs with the stipulation that we not use VNC so I'm wondering if a Windows client for ARD exists.
If not, does anyone have a suggestion for doing RDC from Windows to Mac. I can already do it going from Mac to Windows using MS's client or the open source CoRD, but I'm really hitting dead-ends trying to figure out how to go the other way.

To continue what Templeton Peck said, most any VNC client will work. I personally prefer UltraVNC, and I use that to control 5 different Windows machines from my Mac. While you don't get all the advanced options like sharing clipboards, waking/shutting down, collecting reports etc... You still get full access to the remote Windows machine as you do when you connect to a Mac in ARD.

I use captivate 8, the problem when i make app for android. the sound not heard. i use android4.4. how i do?

i use captivate 8, the problem when i make app for android. the sound not heard.
i use android4.4. how i do?
i use phonegap online.
thank you

Yes I do spend a lot of time in China but I have had problems in other countires as well. I am in China right now.
I have two Gmail accounts and one Cox account. Cox is my intranet provider back home. I have had problems with all three accounts.
I have tried several outgoing port settings. 993, 995 465, 587 are some that I can remember trying.
Sometimes my accounts will go offline without me doing anything. This is all a mystery to me. I don't have any idea why I have trouble like this. A few minutes ago I changed my Cox account outgoing port and took the account on line and I got my incoming email but when I tried to forward an email that I got it would not go out.
Any ideas you have would be helpful.

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem when configuring WebLogic 6.0 for CGI - URGENT

Hello,
Can U please write back for the below described problem.
We are using WebLogic Server 6.0 and we have configured the WLS for CGI support,so
that Oracle Report Server 6.0 cud be used to generate reports.Following is the
series of steps that have been followed for the configuration and generating
a report:
1.The Rwcgi60.exe has been copied from D:\orant\bin ( assumed that D is the drive
wherein Oracle Report Server6.0 has been installed) to the directory C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\cgi-bin
( assumed that C is the drive wherein Weblogic Server6.0 has been installed)
2.The web.xml in the following directory C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF,
has the following details
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 1.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
     <servlet>
          <servlet-name>CGIServlet</servlet-name>
          <servlet-class>weblogic.servlet.CGIServlet</servlet-class>
          <init-param>
          <param-name>cgiDir</param-name>
          <param-value>/bea/wlserver6.0/config/mydomain/applications/DefaultWebApp_myserver/cgi-bin</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>CGIServlet</servlet-name>
          <url-pattern>/cgi-bin/*</url-pattern>
     </servlet-mapping>
</web-app>
3.Environment Variables Settings as mentioned below have been set in the registry,
REPORTS60_SHARED_CACHE = NO
REPORTS60_VIRTUAL_MAP = /CACHE
REPORTS60_PHYSICAL_MAP = D:\orant\REPORT60\SERVER\CACHE
REPORTS60_PATh = D:\orant\REPORT60\ADMIN\TEMPLATE\US;D:\orant\REPORT60;c:\web_reports\reports
REPORTS_CGIMAP = D:\orant\REPORT60\SERVER\cgicmd.dat
4.Started the startWebLogic.cmd, in the directory C:\bea\wlserver6.0\config\mydomain
5.On giving the following URL in the IE5.5, http://bet-pc0080:7001/cgi-bin/rwcgi60.exe?report=Rept4-PriceStructuresCreated.rdf+server=REP60_BET-PC0080+userid=dstnew/dstnew@dstnew+desformat=html+destype=cache+Retailer_id=001010010200103
It shows up the following error in the startWebLogic.cmd and the IE icon on the
browser keeps rotating.
java.lang.ClassCastException: weblogic.utils.Executable$Drainer
at weblogic.servlet.internal.ResponseHeaders.setDateHeader(ResponseHeaders.java:273)
at weblogic.servlet.internal.ServletResponseImpl.setDateHeader(ServletResponseImpl.java:467)
at weblogic.servlet.internal.ServletResponseImpl.writeHeaders(ServletResponseImpl.java:672)
at weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutputStreamImpl.java:130)
at weblogic.servlet.internal.ServletOutputStreamImpl.flushWithCheck(ServletOutputStreamImpl.java:412)
at weblogic.servlet.internal.ServletOutputStreamImpl.checkForFlush(ServletOutputStreamImpl.java:548)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:210)
at weblogic.servlet.internal.WLOutputStreamWriter.flushBuffer(WLOutputStreamWriter.java:139)
at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:104)
at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:67)
at java.io.PrintWriter.write(PrintWriter.java:173)
at weblogic.servlet.CGIServlet$CGICharArrayWriter.write(CGIServlet.java:292)
at weblogic.utils.Executable$Drainer.run(Executable.java:266)
Please send in a solution at the earliest.
Thanks,
Kavitha

Hello,
Can U please write back for the below described problem.
We are using WebLogic Server 6.0 and we have configured the WLS for CGI support,so
that Oracle Report Server 6.0 cud be used to generate reports.Following is the
series of steps that have been followed for the configuration and generating
a report:
1.The Rwcgi60.exe has been copied from D:\orant\bin ( assumed that D is the drive
wherein Oracle Report Server6.0 has been installed) to the directory C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\cgi-bin
( assumed that C is the drive wherein Weblogic Server6.0 has been installed)
2.The web.xml in the following directory C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF,
has the following details
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 1.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
     <servlet>
          <servlet-name>CGIServlet</servlet-name>
          <servlet-class>weblogic.servlet.CGIServlet</servlet-class>
          <init-param>
          <param-name>cgiDir</param-name>
          <param-value>/bea/wlserver6.0/config/mydomain/applications/DefaultWebApp_myserver/cgi-bin</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>CGIServlet</servlet-name>
          <url-pattern>/cgi-bin/*</url-pattern>
     </servlet-mapping>
</web-app>
3.Environment Variables Settings as mentioned below have been set in the registry,
REPORTS60_SHARED_CACHE = NO
REPORTS60_VIRTUAL_MAP = /CACHE
REPORTS60_PHYSICAL_MAP = D:\orant\REPORT60\SERVER\CACHE
REPORTS60_PATh = D:\orant\REPORT60\ADMIN\TEMPLATE\US;D:\orant\REPORT60;c:\web_reports\reports
REPORTS_CGIMAP = D:\orant\REPORT60\SERVER\cgicmd.dat
4.Started the startWebLogic.cmd, in the directory C:\bea\wlserver6.0\config\mydomain
5.On giving the following URL in the IE5.5, http://bet-pc0080:7001/cgi-bin/rwcgi60.exe?report=Rept4-PriceStructuresCreated.rdf+server=REP60_BET-PC0080+userid=dstnew/dstnew@dstnew+desformat=html+destype=cache+Retailer_id=001010010200103
It shows up the following error in the startWebLogic.cmd and the IE icon on the
browser keeps rotating.
java.lang.ClassCastException: weblogic.utils.Executable$Drainer
at weblogic.servlet.internal.ResponseHeaders.setDateHeader(ResponseHeaders.java:273)
at weblogic.servlet.internal.ServletResponseImpl.setDateHeader(ServletResponseImpl.java:467)
at weblogic.servlet.internal.ServletResponseImpl.writeHeaders(ServletResponseImpl.java:672)
at weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutputStreamImpl.java:130)
at weblogic.servlet.internal.ServletOutputStreamImpl.flushWithCheck(ServletOutputStreamImpl.java:412)
at weblogic.servlet.internal.ServletOutputStreamImpl.checkForFlush(ServletOutputStreamImpl.java:548)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:210)
at weblogic.servlet.internal.WLOutputStreamWriter.flushBuffer(WLOutputStreamWriter.java:139)
at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:104)
at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:67)
at java.io.PrintWriter.write(PrintWriter.java:173)
at weblogic.servlet.CGIServlet$CGICharArrayWriter.write(CGIServlet.java:292)
at weblogic.utils.Executable$Drainer.run(Executable.java:266)
Please send in a solution at the earliest.
Thanks,
Kavitha

Installing minimal windows client for ODBC

Does anybody know how to install an oracle ODBC driver to access oracle databases with the following:
- keep oracle client as small as possible (jdbc needs less than 1.5 MB!)
- not to use tnsnames.ora (jdbc does not need this and works fine)
- connecting to databases from workstation as user and not administrator (8.x works but 10.....)
- not to change registry nls_lang entry for connecting to different databases with different settings!
I did never before encounter problems like this with other databases. As we have to user oracle (with ODBC) we have to configure our clients.
btw: odbc driver version is 10g

Thanks a lot for your help,
I got a step further. The mistake was to set the path on the main directory which in my case was C:\Instantclient
instead of the directory created unzipping the installation files: C:\Instantclient\instantclient_10_2
But now I'm in defining the datasouce:
As stated in the help file:
Before you configure the data source, you must configure network database services so there is an entry for each TNS Service Name. To do this, start the Oracle Net Manager by one of the following methods:
From the start menu, select Programs, select Oracle for Windows NT, and select the Oracle Net Manager.
Using the Oracle Net Manager, you can create an entry in the tnsnames.ora file for each TNS Service Name. The Oracle Net Manager is installed when you install Oracle Net Services.
But I don't have any entry in the program group. Does the instant client create an entry as well?
Do I have do install the Oracle Net Services additionally to the Instant client?
In the releasenotes above from legatti they are talking about an TNS_ADMIN entry which has to point to the ora files?
Do I have to define this as systemparameter pointing to the C:\Instantclient\instantclient_10_2 directory as well.
Thanks a lot for every hint
Axel

Rich: calendar problem when automatically adjust clock for daylight saving

Hello, I'm in trouble when the option to automatically adjust clock for daylight saving time is marked. My locale is pt_BR, and when I try to select the day it simply returns to 17.10.2010 on 16.10.2010 took the test in the following component and realized that the same problem occurs when the Windows clock option is selected .
http://livedemo.exadel.com/richfaces-demo/richfaces/calendar.jsf?tab=usage&cid=15374785
I also noticed that this problem occurs in all components of the JSF schedule, no matter what the distribution
http://www.primefaces.org:8080/prime-showcase/ui/calendarDisplay.jsf
Question is, how to make the jsf solve this problem without having to uncheck the Windows clock?
See below for the following attempts to try to fix the problem:
faces-config.xml file
    <locale-config>
         <default-locale> en </ default-locale>
         <supported-locale> en_US </ supported-locale>
         <supported-locale> of </ supported-locale>
         <supported-locale> fr </ supported-locale>
        <supported-locale> es </ supported-locale>
        <default-time-zone-id> Brazil / East </ default-time-zone-id>
    </locale-config>
{code}
Created file DateTimeZoneConverter
{code:java}
import java.util.SimpleTimeZone;
import javax.faces.convert.DateTimeConverter;
public class extends DateTimeZoneConverter DateTimeConverter {
     public DateTimeZoneConverter () {
        super ();
        SimpleTimeZone stz = new SimpleTimeZone (7200000, "Brazil/East");
        this.setTimeZone (stz);
{code}
In the example above I'm forcing the useDaylight is false.
In component:
{code:java}
<rich:calendar id = "periodoVigencia" enableManualInput = "true" datePattern = "dd / MM / yyyy" inputSize = "10"
           value = "# () contratoMBeanList.criteria.dataInicioVigencia"
           label = "# (msg ['contrato.consultarContrato.field.periodovigencia.label'])">
           <f:convertDateTime pattern="dd/MM/yyyy" type="date" dateStyle="short" timeZone="GMT-3"/>
</rich:calendar>
{code}
and in the web.xml file
{code:java}
<context-param>
     <param-name> timezone </ param-name>
      <param-value> GMT-3 </ param-value>
</context-param>
{code}
But nothing worked. And now what do I do? How to fix this problem, there are some more configuration to be done? Help, please!
P.S.:Apologize for my english, I'm Brazilian.

Like I said, were attempts to resolve the error.
OK, now how to solve this problem? Try the test in your area by selecting the day that DST occurs, you will see what will happen the same problem (to select the day that DST occurs on the screen will return one day less), do the test with the demos that I put in the first post, rich: calendar and prime: calendar.
I do not know if it helps, but I noticed the firebug firefox debugging, it does not matter the way you change the locale or timezone, as the current date from the calendar javascript will always be the standard of the machine running the component.

Please help : "Configuring Windows SSO for Sun portal server 7.1"

Hello friends,
I have a problem when create Single Sign On ( SSO ) on the portal server 7.0
If you have configured successfully.Please give me the way you have used.
Thank you very much.
DungT
Related document and information :
http://docs.sun.com/app/docs/doc/819-4670/6n6qardtu?a=view#gbaqc
http://forum.java.sun.com/thread.jspa?threadID=5140689&messageID=9519196
Edited by: dungtran on Mar 13, 2008 4:35 AM

There is a ZIP Install available for Windows that bundles the Access Manager, Directory Server,and Portal Server in a pre-configured deployment. Try this download instead:
PS 7.1u1
[https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_us/-/USD/ViewProductDetail-Start?ProductRef=PortalSvr7.1U1-OTH-G-F@CDS-CDS_SMI]
PS 7.2
[https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=PortalSvr7.2-OTH-G-F@CDS-CDS_SMI]
- Jim

Problem with Configuration of GP for Adobe Forms

Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, Mariano

Hi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you***************

Any problems when installing Windows 7 SP1?

Hello everyone,
I just got myself a MacBook Pro yesterday and today I just installed Windows 7 Ultimate via Boot Camp.
I want to update it to Windows 7 Service Pack 1 and was wondering if there were any problems with doing that.
For example, driver issues or errors?
I don't use any HFS software or anything, if that matters.
Anyway, it's my first time posting here and I hope to get some answers.
Thanks in advance!
Cheers.

Hi,
I installed Windows 7 Home Premium on my Macbook Pro (Early 2011) using Boot Camp and then updated to SP1 and there seems to be no issues with it so far. Just make sure you set the start up disk to the Boot Camp partition so when the Mac restarts for the update it boots back into Windows, you can change it back when Windows says that the SP installed correctly.
Tim

Virtual Windows Clients for testing

Rather than having a bunch of local virtual Windows clients (Windows 7, Windows 7 64 bit, Windows 8, Windows 8.1) set up with different Office version for testing our own applications, I'd like to have them on Azure. Only for testing code with our development
partners.
So far I can not find any such offering on the Azure portal.
This Q&A seems to suggest that is not allowed.
http://azure.microsoft.com/en-us/pricing/licensing-faq/
Can
customers rent Windows Client desktops on Azure or other Service providers?
No, multi-tenant hosting is restricted in the Product Use Rights of Windows Client, such as Windows 7 or Windows 8. Windows Client Desktops are not available on either Azure or on any other Service Provider such as Amazon or Rackspace.
You can read more about the Microsoft Product Use Rights here.
Can
customers run Microsoft Office and Windows 7 Client on Virtual Machines using License Mobility for Software Assurance?
No. Under the Microsoft Product use Rights (PUR), Office and Windows 7 are not licensed to run on Virtual Machines. In particular, Microsoft Office is classified in the PUR as “Desktop Applications”, which is not included in Licensing
Mobility.
Amazon Workspaces?
Seems to be what I want, although only Windows 7 and Office 2010/2013. I also need Visio as our product is an add in to Visio. http://aws.amazon.com/workspaces/
Is this available on Azure and what are my options to get a simple cloud hosted virtual machine with Windows for testing?
Thanks!

Hi,
For MSDN subscribers, Windows 7 and Windows 8.1 images are available when creating a VM in Azure gallery.
http://azure.microsoft.com/blog/2014/05/29/windows-client-images-on-azure/
If you have no MSDN subscription, you can upload a Windows client image to Azure storage account and use it to create a VM. However, since the limitation of license
in Azure, you cannot activate it.
In addition, you can also submit a feedback to release the images of Windows client OS in Azure gallery for all subscriptions:
http://feedback.azure.com/forums/34192--general-feedback
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cache problem when loading modules ?

Hello Flex friends !
I am currently experiencing a strange problem. It happens in
my production environment when using my web browser to access the
application. Here it is :
The main application is a menu on the left and a ModuleLoader
in the center. Regarding the menu's button I click, the
ModuleLoader will load either ModuleA, ModuleB, etc ... nothing's
special until then, everything works fine.
Then I update the ModuleA.swf and Module.swf files. Now when
I click the menu's button I get the old ModuleA and ModuleB.
This seems to be a cache problem, no ? I thought the browser
was going to compare the local ModuleA version and the server
ModuleA version and then load the server ModuleA version, but it
does not seem to work this way. So How does it work ? I'd like to
understand.
Thanks for your help guys !
Olivier

Hi,
Try this.
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Thanks,
JituK

DNS caching problem when configuring Windows clients for SCAN

Similar Messages

Maybe you are looking for