Has some problems when configuring windows authentication in IIS 7

Recently I'm working on a project. This project is deployed on Windows server 2008 R2 and using IIS7.
It's using classic ASP, not ASP.NET.
In this project we want to use Windows Authentication for application login and SQL connection.
The problem is when we enable Windows Authentication, the application can't connect to the SQL server. The error message said " Login
failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.". If we enable Basic Authentication the application will use the current logon user to connect the SQL server.
The expected result is after the Windows Authentication is enabled, when somebody logon to the application, the application will use the application pool account to connect to the SQL server not the current logon user or anonymous user.
Does anybody has any idea about this?
Jacob.Gu

Hello Jacob.Gu,
This forum supports .NET installation not IIS setting, please reopen a new post on the following forum:
http://forums.iis.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

DNS caching problem when configuring Windows clients for SCAN

I have a Windows 2008 R2 server running apps that connect to a RAC cluster database using the SCAN address. The SCAN address however always returns the same IP when you ping it from that server. If I flush the DNS cache I get a different address, but again the same one all the time. I believe this is caused by the fact that DNS caching is enabled on Windows by default. This has caused problems when one of the RAC nodes goes south and the cached SCAN IP is not responding. The applications lose their connections, try to reconnect, but can't because they keep using the same dead SCAN IP.
I suggested we disable the DNS Client service on those machines so that the SCAN name correctly cycles through the addresses but the Windows admin says not to do this. Is there a documented practice somewhere that this is OK to do for Windows RAC clients? Or is there a way to disable caching just on the SCAN name but leave it enabled from every other host name?
TIA

What happened was the SCAN VIP did not fail over. The node VIP did not fail over. The database instance was running but I could not connect to it even locally as sysdba. I got the message "protocol adapter error". This normally only occurs on Windows for local connections when either (a) the Oracle service is not running, or (b) you didn't set the ORACLE_SID variable correctly. Neither was true.
I tried "crsctl stop crs" but it could not stop the listeners.
I rebooted the server. During the reboot, neither the VIP no SCAN VIPs failed over. It's almost as if CRS either didnt recognize tat the other node had been shutdown, or it didn't care.
I have never seen this happen before.
For the record this is Oracle RAC 11.2.0.1.

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

My Iphone 5 has some issues when I tried to restore it, I could not, can someone help please?

My Iphone 5 has some issues when I tried to restore it, I could not as it is displayed "iTunes could not contact the iphone software update server because you are not connected to the internet Make sure your internet connection is active and try again, while I am connected to the internet. can someone help please?

Hi, Jam 974.
Here is an article I would recommend going through when experiencing this issue.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
Cheers,
Jason H.

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I downloaded the 09 version without deleting the 0, and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible !

I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?

Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)

Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay

My ipad mini is stil in warranty, but my software has some problem, if format it need to pay?

my ipad mini is stil in warranty, but my software has some problem, if format it need to pay?

Restoring the iPad can be done by the owner and doesn't involve or affect the device's warranty. It's free.
(107649)

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

My iphone has a problem, when any people call me, them can't ear me

My iphone has a problem, when any people call me, them can't ear me.

iphone hardware troubleshooting http://support.apple.com/kb/TS2802

HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

Has some problems when configuring windows authentication in IIS 7

Similar Messages

Maybe you are looking for