Do I need ACF on each client machine to enable Interactive forms within WDJ

hello All,
I want to integrate the Interactive Forms in some of my Web Dynpro JAVA Applications, which in turn will be run inside a Portal.
Wanted to know if installing the ACF on each client machine is a pre-requisite to view the PDFs directly inside the EP screen.
The EP version is 7.00 SP18. We do have the ADS configured in one of the server.
I know ACF was required on each client machine for EP 6.0, not sure about the 7.0 version though.
Where can I see the pre-requisites for using ADF forms within WDJ?
Any pointer is greatly appreciated.
Thanks

Sandip,
Do refer [this|http://help.sap.com/saphelp_nw70/helpdata/EN/2c/241a427ff6db2ce10000000a1550b0/frameset.htm] link. It has the information you need. Short text from the same link
"Interactive forms in the ISR framework are part of ZCI. They can be used as of SAP NetWeaver SPS 10 at runtime in Web Dynpro for ABAP based on Zero Client Installation (ZCI). To enable this, the forms must contain special scripting, which you insert when you create new forms in Form Builder.
Until now, you needed to install Active Component Framework (ACF) on the front-end PC to use interactive forms. As of SAP NetWeaver 7.0 SPS10, ZCI enables you to use interactive forms in Adobe Reader without any additional plug-ins. ACF is therefore no longer required for interactive forms."
So you can conclude that you wouldnt need the ACF plugin on each client PC.
Thanks,
GLM

Similar Messages

Creation of CSV file on client machine with data from forms

Hi,
My requirement is to generate a CSV file(or .XLS) on the client machine ie local drive with the details shown in a form.
Oracle version -
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production.
I have searched the web for last couple of days and got to know that TEXT_IO is to be used to generate files on client machine. However, when I tried TEXT_IO, it was not able to generate the file on client rather it was able to generate on database server. After further browsing on this, there was a link which said that we need to use CLIENT_TEXT_IO to generate file on client side. For this, i was required to subclass the webutil.pll which i did and corrected the code to use CLIENT_TEXT_IO. The form was unable to compile and was not able to find "webutil_core" package.
I am very confused with the disparity in the information available on the web as in what to use to generate a file on client side. If anyone has use it in the past, can he/she please detail what to use to get things sorted.
Thanks,
R

Oracle version - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production. >
So, what is your FORMS version. This is more important than your database version.
My requirement is to generate a CSV file(or .XLS) on the client machine ie local drive with the details shown in a form. Depending on your Forms version, you would use TEXT_IO (if Forms 6i running in Client/Server mode) or WebUtil (if Forms 9i or higher).
I'm going to guess that you are at least using Oracle Forms 9i since you stated that your attempt at using TEXT_IO produced a file on the DB server.
There is more to using WebUtil than just attaching the WEBUTIL.PLL. If you had performed a simple search of the Forms Help System would have found numerous WebUtil topics to include: Introduction to WebUtil, Configuring WebUtil, Using WebUtil in Your Applications and the WebUtil User's Guide. If you have Oracle Forms release 10g or higher, WebUtil is included when you installed Forms, however, you do need to configure your installation to use WebUtil and you must download the Java COM Bridge (jacob.jar) from Source Forge. Take a look at the Configuring WebUtil Forms Help topic to find out which version of the Java COM Bridge you will need to download.
After you have successfully configured WebUtil, take a look at the Using WebUtil in Your Applications topic to find out how to implement WebUtil in a form.
Searching the Internet for answers is great, but don't forget the look at the Forms Help System because the majority of your questions can be answered there. :)
Lastly, configuration of WebUtil is primarily done on your Application Server (AS). However, if you plan to perform preliminary runtime testing by running your Form from the Forms Builder, then you will configure your local runtime to support WebUtil as well as configure your AS. The steps are exactly the same. A common mis-step is to skip a step during the configuration because you don't think the step applies. Take a look at the Forms Help Runtime Setup Checklist topic for a list of step you need to complete in order to enable WebUtil.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

What are the Client machine requirements for running Forms 6i?

What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
Thanks in advance.

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

Want to get the Client Machine name from Oracle Forms

Hi,
I want to get the Client machine name from the Oracle Forms.
I have attached web_util.pll.
I use user_name := webutil_clientinfo.get_host_name;
but i am getting following error - WebUtil Error:WUC-015: Your form must contain the following Bean for this function to be available: oracle.forms.webutil.clientinfo.GetClientInfo.
Can any one help me in this!
Thanks & Regards,
Avinash Bhamare.
Pune.

Hi,
I have written the code on when-button-pressed trigger of a push button -
DECLARE
user_name VARCHAR2(50);
BEGIN
user_name := client_win_api_environment.get_computer_name;
message('user_name is :'||user_name);
message('user_name is :'||user_name);
END;
And on clicking on this button i am getting error -
frm-40734:Internal Error:PL/SQL error occurred
Can any one help in this asap please!
Thanks & Regards,
Avinash.

Client machine can not access forms on a aplication machine

Hello I am a novice to oracle db and have a problem..
I installed 10g database + Dev. suite and created two tables and corresponding form and it works perfectly on local machine !
Now I tried to access that form from another client machine (in same workgroup) which correctly displayed oracle forms services but can not find that test form I created...
The question is what properties should be set to that form to be accessible from the client machine ?
thank you,
edo

Shoud I make additional settings to my test form on server, in order to be accessible from client machine ?No. Assuming you did activate OC4J on Dev suite machine, and you use some URL to run the Form on that machine, you can use the same URL on Client machine. Just change the machine name if you use "localhost" or loopback address on Dev suite machine.

Need to capture full file path in Adobe Interactive Form

Hi All,
I have a requirement where I have a field ZPATH1 on Adobe Interactive Form. I am putting a BROWSE button and writing following JavaScript on CLICK event on this button for populating the chosen file path into field ZPATH1.
*Start of JavaScript
var sFile;
event.target.importDataObject(sFile);
var oFile;
oFile = event.target.getDataObject(sFile);
this.parent.parent.Sub_Form_Fields_Mass.ZPATH1.rawValue = oFile.path;
*End of JavaScript
1. event.target.importDataObject(sFile) --> Giving me the pop up to select the file.
2. this.parent.parent.Sub_Form_Fields_Mass.ZPATH1.rawValue = oFile.path; --> Putting the oFile path in field ZPATH1 on the form.
3. This way is only giving me the selected FILE NAME whereas I need the complete path.
I have tried below way also:
this.parent.parent.Sub_Form_Fields_Mass.ZPATH1.rawValue = even.target.path;
This function returns me the complete path but in URL form. It does not give me the presentation server path.
Please suggest me how to get the complete path of presentation server to the file.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Ashish
I have also tried below way:
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 17, 2008 3:26 PM

please post it here for quick response
and also search in adobe forums also for java script related.
http://www.adobe.com/support/forums/index.html

Barcodes are not shown in the client machine

Hi,
We are using asp.net web forms for launching crystal reports. Crystal Reports rpt with barcode has been designed in Crystal 2008. Barcode field has been defined by right clicking the required field and selecting Change to Barcode u2026 and the barcode type is selected.
Barcode is shown when we launch the report in the web server. When we launch the same report in the client machine barcode is not shown to the user. The barcode font u201CCode39AzaleaWide2u201D is not available in the client machine.
How to overcome this issue without installing the font manually in each client machines. Crystal Reports 2008 is installed in the web server.
I need some clarifications
1. Whether the barcode fonts should be installed (mandatory) in the client machines.
2. On launching the report whether the barcode fonts will be downloaded from the web server to the client machine
3. Are the barcode fonts are freely distributable to all the client machines both internet and intranet users
4. Is there any document available regarding this issue

Hi,
Please check [KB1588027|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383338333033323337%7D.do] for the answers.
It is your call on how to distribute the fonts. Reports will not download the fonts on it's own.
Thanks,
Saurabh

How can I change java.policy at runtim on client machines using java webst?

Hi,
I have to change java.policy to launch my application through webstart to provide one RuntimePermission "permission java.lang.RuntimePermission "getClassLoader";"
Its because of a bug in java bug "_http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4809366_"
So, my problem here is, how can I do this dynamically on each client machine's java.policy.
I have spent time on this and found some alternatives
1. Specifying an Additional Policy File at Runtime by launching application "java -Djava.security.manager -Djava.security.policy=someURL SomeApp"
Please refer more on this "http://docs.oracle.com/javase/6/docs/technotes/guides/security/PolicyFiles.html"
But, here the problem is, how can I do this using webstart (expert.jnlp) file even though I have the "java-vm-args" tag, its not supporting this argument.
Please refer "http://docs.oracle.com/javase/6/docs/technotes/guides/javaws/developersguide/syntax.html#security";
2. Implementing the Policy in code.
But, not sure how to do this..
How can I grant the runtime permission on every user's machine dynamycally?
Here are some background details on this:
I am using java6 and weblogic 10.3.3.
Here is thing that I tried,
My application downloads a few jars to the client machines using java webstart and then it will get the initial context using the t3 protocal. The jars include wlclient.jar and ojdbc6.jar initially.
The problem here I was facing, when I tried request a bean, it is giving me the following exception in the client logs.It is requesting one state less session bean and I checked the server logs as well and the bean has returned the expected values properly.
But here I observed one more thing, before this request, one session bean(state less) has been requested successfully.
java.rmi.MarshalException: CORBA MARSHAL 0 No; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: No
at com.sun.corba.se.impl.javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at com.mbt.expert.server.util._ServerDBQueryObjectRemote_Stub.getExchangeList(Unknown Source)
at com.mbt.expert.util.DBQueryObject.getExchangeList(DBQueryObject.java:419)
at com.mbt.expert.view.dialogs.OpenExchangeDialog.actionPerformed(OpenExchangeDialog.java:425)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.mbt.expert.view.dialogs.OpenExchangeDialog.displayDialog(OpenExchangeDialog.java:606)
at com.mbt.expert.mdi.actions.OpenExchangeAction.execute(OpenExchangeAction.java:204)
at com.mbt.mdi.MDICommand.actionPerformed(MDICommand.java:47)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
... 80 more
The same is working in some other machine which are in different network. So, I have replaced the wlclient.jar with the wlthint3client.jar.
After replacing this jar I was getting the below exception in client logs while requesting a state less session bean.I also checked whether the request is reaching the server (bean) or not, but its not reaching the server.The problem is same at all the machines irrespective of the networks.
java.lang.AssertionError: Failed to generate class for com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:797)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:786)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:213)
at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at java.io.ObjectStreamClass.invokeReadResolve(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:197)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:598)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:193)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:240)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1033_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:405)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(Unknown Source)
at com.mbt.expert.mdi.ExpertVariable.getLoginSession(ExpertVariable.java:455)
at com.mbt.expert.view.dialogs.Login.okPressed(Login.java:187)
at com.mbt.expert.view.dialogs.Login.keyPressed(Login.java:141)
at java.awt.Component.processKeyEvent(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:795)
... 55 more
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission getClassLoader)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.ClassLoader.getSystemClassLoader(Unknown Source)
at weblogic.utils.classloaders.AugmentableClassLoaderManager.getAugmentableClassLoader(AugmentableClassLoaderManager.java:48)
at weblogic.rmi.internal.ClientRuntimeDescriptor.findLoader(ClientRuntimeDescriptor.java:254)
at weblogic.rmi.internal.ClientRuntimeDescriptor.getInterfaces(ClientRuntimeDescriptor.java:132)
at weblogic.rmi.internal.StubInfo.getInterfaces(StubInfo.java:77)
at com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub.ensureInitialized(Unknown Source)
at com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub.<init>(Unknown Source)
... 60 more
I have tried one more thing, I have taken all the required jars to one of the client machines and executed the main class (by setting the required class path) from cmd using java instead of javaws. Surprisingly, its working fine with out any problem using the wlthint3client.jar.
I also tried the same, by placing wlclient.jar using java in the same way(from cmd instead of javaws ), but I was facing the same exception while requesting the second session bean and found the same above exception in client logs.
To resolve this, I come across the java bug that I have given earlier "_http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4809366_".
In that page, I found a work around for this; suggested by bea to add the Runtime permission "permission java.lang.RuntimePermission "getClassLoader";" to the clients java.policy
So, please suggest me a way to resolve this problem.
Please suggest me if you have any other solutions for this problem.
Thanks in advance :)

I still think your problem is nothing to do with that ancient non-bug and that you should be looking elsewhere. You might be lucky and find someone here who can say "Ah, I know what that is" but I doubt it because since Oracle took over Sun this site has gone down hill big time.

Apparent gap in java applet security on client machine

I know about signing applets, and both the new and original security models for applets. For my purposes, the original security model for applets is just about perfect. My applets do not need access to the client machine hardware, nor do they need to access any machine other than that which provides them to the client (at least at present).
What I have been told is that it is not possible for a server of any kind (DB, servlets, &c.) to authenticate an applet. The claim was made that all the security was designed for client security and that a developer's only option is to trust the client machine.
I can exchange information among my servers over SSL, and secure communications between by servers and applet clients. However, what is there to prevent a bad guy from breaking into a client machine and then capturing and modifying the applet I am relying on to protect the client's sensitive data? Signing the applet tells the user that the applet has not been modified from what I have produced, and so the user should feel confident enough to run it. But what if the applet and related web page is cached, and someone who has, legitimately or not, access to the machine and tries to use the cached copy for inappropriate purposes?
If my servers can not verify that the applet code accessing them is mine, rather than a variant created to mimic my applet, then that certainly creates a risk for my code, but doesn't it also create a security risk for the client? After all, it is the client's sensitive data I am trying to protect, and I can envision a situation in which a bogus applet mascerades as mine and sends that sensitive data to a bad guy's machine; all this while giving the user the illusion that his data is safe.
The gap here is either in my understanding of this technology or a gap in java security, so I'll put the question another way also. Is it possible for a server (e.g. an application server such as Tomcat or Sun's application server) to verify that the applet code used to try to connect with them is in fact the applet code that was signed on and served from the same machine and not malicious code masceraing as my code? If so, how does that work, and how does the programmer do it?
Thanks,
Ted

the jar file reqiured is jmf.jar this jar file will there in
jmf_home/lib
for example in my mechine
C:\Program Files\JMF2.1.1e\lib this jar file contain all the file reqired to run the application
i think you may need some of the dll files also to run see
if reqiured the then it may throw exception
java.lang.UnsatisfiedLinkError then put respective dll file to workiing folder or the system32 folder

HOW TO CONNECT FROM CLIENT MACHINE TO REMOTE MACHINE(SERVER DATABASE MACHINE)

Hi friends.
I need your valuable help,
I am using oracle 11g database.
I have two system.One is client machine and installed oracle 11G client software.
and from this machine user can connect remote server database(This is old remote system, this is just for Information).
And i have created one new database called RMANP in new remote server machine (this is the machine, in which i need to connect from client machine)
ex
CLIENT MACHINE DETAIL IS:
system66
ip address is 192.162.21.66
REMOTE SEVER MACHINE DETAILS IS:
system56
ip address is 192.162.21.56.
and i add entry on client machine tnsname.ora file like following,
RMANP=
(DESCRIPTION=
   (ADDRESS=
     (PROTOCOL=TCP)
     (HOST=192.168.21.56)
     (PORT=1521)
   (CONNECT_DATA=
     (SERVICE_NAME=rmanp)
But when i try to connect to remote server from client machine in sqlplus, i am getting an error, Like following,
SQL> CONN SYS/SYSPW AS SYSDBA;
ERROR:
ORA-12560: TNS:protocol adapter error

2684285 wrote:
Hi friends.
I need your valuable help,
I am using oracle 11g database.
I have two system.One is client machine and installed oracle 11G client software.
and from this machine user can connect remote server database(This is old remote system, this is just for Information).
And i have created one new database called RMANP in new remote server machine (this is the machine, in which i need to connect from client machine)
ex
CLIENT MACHINE DETAIL IS:
system66
ip address is 192.162.21.66
REMOTE SEVER MACHINE DETAILS IS:
system56
ip address is 192.162.21.56.
and i add entry on client machine tnsname.ora file like following,
RMANP=
(DESCRIPTION=
   (ADDRESS=
     (PROTOCOL=TCP)
     (HOST=192.168.21.56)
     (PORT=1521)
   (CONNECT_DATA=
     (SERVICE_NAME=rmanp)
But when i try to connect to remote server from client machine in sqlplus, i am getting an error, Like following,
SQL> CONN SYS/SYSPW AS SYSDBA;
ERROR:
ORA-12560: TNS:protocol adapter error
There is nothing in your connect string to tell sqlplus which database you want to connect to. Therefore it assumes (by default) that you want to connect to a *local* database whose name is identified by the value of the environment variable ORACLE_SID. And there is no such database, so he gets the reported error trying to establish a connection to a non-existent local service.
You need to specify your target database, thusly:
SQL> conn sys/syspw@rmanp as sysdba
BTW, connecting to a remote database as sysdba is considered by most DBAs to be a big secruity breach. If you really need sysdba privileges (rare) you should be logged on to the database server machine with proper OS credentials, and work from there.
Also, TYPING IN ALL CAPS IS PERCEIVED AS SHOUTING.

Save plug-in trace file to client machine

I develop for a company who makes a web based server/client application. I am required to find a way to save the java plugin trace file on the client machine so that it doesn't get overwritten each time a client starts a new session.
I have seen the command for java 1.4 -Djavaplugin.outputfiles.overwrite=false but I can't seem to get it working for java 1.5.
I am also required to find a way to change the settings without touching or installing something on each client machine.
Does anyone have any suggestions as to where I should look for an answer, or have any ideas on a solution.
Thanks

This is a known issue. See bug http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5066440
The bug has been fixed in jre 1.4.2_09, and in the upcoming release 1.6.0. It looks like the fix has not been ported to 1.5 release.

How to install only client tier on Client Machine

Hi,
Presently in Server the Hyperion is Installed, now i need to install Hyperion (Client machine ) & configure on Client machine and configure the Server database. while installing the hyperion on client machine should we select all the Services products check boxes (i.e) Client Tier, Web Server, Web Application Server & Service Tier --- or only the "Client Tier" products check boxes should be selected? and this client machine should be accessed by the onsite person.
Please help on this!!!
Waiting for your positive response....
Thanks,
Ravinder
Edited by: 809788 on Dec 22, 2010 10:41 AM

NielOlsson wrote:
If you just need the Run Time Client for Essbase installed on a machine, the easiest and quickest way to get it done is by using the installation for the Excel Addin. It is a much smaller and will install more quickly.Depends on version, in version 11 the standalone excel addin does not include the client as part of the installation.
Cheers
John
http://john-goodwin.blogspot.com/

OS X Server files open as read only on client machines.

Recently, users became unable to save changes to any file on our server or add any file to any folder on our server. The server folders and files are all opening as read only on the client machines. Currently, the users are all assigned to a group, we'll call it "companyusers", this group is granted full read/write access. On the Get Info dialog box for each file on the server, the group "companyusers" is accurately displayed under sharing and permissions with Read & Write privileges, however under the Get Info dialog box for each client machine, the group "companyusers" is non-existent. Only a name titled "(unknown)" and "everyone" is showing up. Any ideas on why the "companyusers" group is not showing up on the sharing and permissions section for the client machines?

I think I found the fix. Looks like it works in my quick test.
I read this post here:
http://discussions.apple.com/thread.jspa?messageID=8278602&#8278602
Basically in Server Admin, I went to the 'File Sharing Tab' at the top of the window
Clicked on 'Share points'
High-lighted my Share Point
Below in the window, clicked on Share Point
Clicked on Protocol Options...
Clicked on SMB
Clicked on Assign as Follows - and I made everything Read & Write.

Time Machine AFP shares for client machines

I have migrated a Mac Mini from 10.6 Server to 10.7 Server. This is my own internal mail server etc so it is not too critical.
I have a DROBO connected to the mini and the DROBO has been partitioned into 4 partitions. Three of the partitions are shares which I used for the Time Machine (TM) backups on my MBP, my wife's iMac and the mini server. The fourth partition was for shared files. All this worked well in 10.6 but it seems broken with 10.7. I did this so I could limit how much space was available for each client machine's TM backup.
First in the Server.app the TM service I though was just for the server but it seems that once you specify this it created a shared folder which serves as a target for client machine backups. There doesn't seem to be a way of designating specific shares for different client machines.
Second, the shares that I used in 10.6 are still there and permissions are correct but even though I can connect to the share via the finder, TM on a client (MBP running 10.7) looks like it stalls during the preparing backup phase then fails.
If you cannot specify individual shares for client TM backups this is huge step backwards! With little or no documentation and a ludicrous dumbing down of the Server management interface I can't see 10.7 server as anything but a toy. Not to mention the switch from MySQL and removal of pptp VPNs this product is just half baked. Sorry but the more I use 10.7 server the less I like it.

Well, it appears to be working. I used the "Connect To Server" option from the "Go" menu of the Finder and connected via IP address. The Mini is set up with a static IP. I'm not sure if it is working consistently, yet. I got one good Time Machine backup so far.
I do seem to be experiencing some inconsistent network behavior as far as seeing the Mini on the network via my Lion machines. It seems to drop off the Finder sidebar for no apparent reason. Will post another update later.

Users from same OD have different group memberships on each client

Hello -
I am getting the dreaded "This user can not login because an error occurred" when a network user tries to log in.
Oddly - on some clients he can log in, but not others.
I have checked the open directory settings in directory utility on each client machine and they are identical.
But typing id <username> on each of the clients gives me different results :
Server
id: bensmith: no such user
*Client machine that works (iMac)*
Office-iMac:~ apndavies$ id bensmith
uid=1040(bensmith) gid=20(staff) groups=20(staff),1027(family),103(com.apple.sharepoint.group.2),404(com.apple.s harepoint.group.7),402(com.apple.sharepoint.group.6),216(com.apple.access_loginw indow),107(com.apple.sharepoint.group.5),1033(mobileaccounts),62(netaccounts),12 (everyone),401(com.apple.sharepoint.group.3),403(com.apple.sharepoint.group.4),1 01(com.apple.sharepoint.group.1)
*Client machine that won't allow network users to login*
Study-Mac-Mini:~ apndavies$ id bensmith
uid=1040(bensmith) gid=20(staff) groups=20(staff),1027(family),1033(mobileaccounts),62(netaccounts),12(everyone) ,101(com.apple.sharepoint.group.1),216(com.apple.access_loginwindow)
Have I got a problem with Open Directory? Surely the results of the id command should be identical?
Many thanks,
Andrew

Hi Tim -
Yes it is. Sorry - was getting a bit desperate this morning.
Problem now solved - for those with the same / similar issues there were two problems.
Initially - the client machine that would not connect had it's DNS server set to my router - not my server (which is running DNS for the local LAN)
Once I fixed that (don't have a clue why or how this setting got changed - could have been wrongly assigned my my router (Airport Express) - not sure), I noticed that Kerberos was no longer running on the server. I could connect to it via screen sharing, but I couldn't connect to an AFP share. I checked a few things, then happened to notice that my Snow Leopard server was no longer "bound" to open directory (itself) in System Preferences>Accounts>Login options.
Fixing both of these issues resolved the problem.
Thanks again to Tim for his help and advice.
Regards,
Andrew

Do I need ACF on each client machine to enable Interactive forms within WDJ

Similar Messages

Maybe you are looking for