Do I need to get VZ Navigator or does it come with it?
I really wish that I had a manual in hand. There's no search option on a PDF and you can't be calling Verizon with every little question
VZ Navigator is an additional charge of 9.99 a month. Here is a link of a PDF manual for your phone.
http://infomanagerdoc.ddc.vzwcorp.com/EQUIPMENT_GUIDE/equipment_guide/WEP/Manual/Motorola/droid2.pdf
Similar Messages
-
I have been using the phone gap build service and I noticed that the plans page links to the Creative Cloud plans as well (the ? in the top right). I was wondering if I get the photoshop/lightroom plan if I get access to the paid phone gap build service or if I need to purchase that as well?
Thanks.Phone Gap is not part of the photography bundle. Why should it? You do not get Dreamweaver or Flash to actually build content for Phone Gap, only PS and LR.
Mylenium -
need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
my ipad device does not come up on itunes, need help fast:/, my ipad device does not come up on itunes, need help fast:/
Hi, Nancy.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing an error that begins with 0xE.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221
Cheers,
Jason H. -
I need to get rid of the ads on coupons with all these women it is disguisting
the ads by coupon drop down I need to get rid of them. They are driving me crazy
You can check for suspicious installed extensions in Firefox.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
I have purchased Photoshop CC that comes with Lightroom 5. I already have Lightroom 5.1 installed and wondering do I need to install the Lightroom that comes with Photoshop CC 2014? Thanks
johnhawk666 wrote:
As you bought the CC plan of Photoshop plus Lightroom, you should uninstall your standalone copy of Lr as it may interfere with the correct working of the CC version, and install the CC version.
I don't think that's true at the moment; the CC version of LR5 is identical to the stand-alone version, and it will interwork with Photoshop in the same way.
However, when LR6 is released then that comes free with CC but not with the stand-alone version. So you might want to follow johnhawk666's advice when LR6 is released, if you haven't done it by then, or you won't get the upgrade to LR6.
By the way, uninstalling your existing LR5, then installing the CC version (via the CC app) shouldn't alter anything - your settings, catalog etc should be picked up by the new installation. However, a wise person would back everything up first anyway, just in case! -
When you buy a macbook pro does it come with all the software you need
when i purchase a macbook pro with retina display. will it come with all the software i need
Hi logan_logan,
Probably all depends on your past experience, but I'm getting a new Macbook Air next week, and I will be purchasing Microsoft Office. I have been using Word and Excel for years, and know all of the tricks, bells, and whistles, so just really don't want to go through a major learning curve to figure out how to use a new word processing and spreadsheet processing system.
I've had a little experience with Pages on my iPad (which I know is not even a close comparison to what is on the Mac), but I'm just more comfortable with Word.
So, I'd say depends on whether you want something that you are comfortable with, or something that is a new adventure! What's your pleasure?
GB -
Help: I have a very well defined folder structure. Folder are located in a Master location and organized by State. Inside of these are my master RAW file folders organized by location. For example: West Virginia > BIRI_RAW_2012, BLFA_RAW_2013, NERI_RAW_2013, etc. After I set up the masterful following a shoot, I go to LR and import the images. At one time I inadvertently imported the NERI_RAW_2013 masterful set as a subset of something else and it was not appearing in my LR Module in the organization I prefer. So I went to my master folders on my drive and moved the NERI file into the West Virginia state folder. When I went back to LR, as expected the NERI folder was grey with a question mark. So I right clicked to find the files and relink, and it did not work. The folder name disappeared. The RAW files are still in the catalog and show up in a missing photos search. I can't reimport because they are already there. I just need to restore my folder structure and get the images back to the right spot.
So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos. -
hi thereI just bought a new computer (HP) and it only has USB ports.. so i need to figure out how to connect the cord from the laserjet 4250tn to the new hp! which usb converter should i get? The new computer has windows 7.. thanks!
Hi,
Printer standard connectivity:
Hi-Speed USB port (compatible with USB 2.0 specifications), IEEE 1284-B compliant parallel port, 2 open EIO slots, HP Jetdirect Fast Ethernet Embedded Print Server.
Therefore you can use normal USB cable (A Male to B Male) to connect printer with your computer. The cable should look like this:
http://www.amazon.com/Male-USB-Cable/dp/B00091QRR0
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
No way for us to know for sure (without similar product/issues) but the
HP Support site suggests that with the current Mavericks OS X 10.9.x
their drivers should be available through Apple Software Updates:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
However that may be limited to certain models of printers or scanners that
already had been known to be working under OS X as of that date in a
prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
•Drivers and Downloads for Printers, Scanners, & More - HP Support:
http://www8.hp.com/us/en/drivers.html
A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
•OS X: Printer and scanner software available for download
HP Officejet t65 All-in-One Printer
{According to this page, your old printer has only Windows & Linux drivers
but you may or may not look into third-party driver support through such
sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
•HP Support Forum - Home:
http://h30434.www3.hp.com/psg/?lang=en&cc=us
You may be able to get a deal on a new printer as they are rapidly obsoleted.
PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
Mac OS X 10.5: Included printer drivers
Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
but the Gutenprint lead may be helpful to locate whatever may exist; or not.
https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
Good luck & happy computing!
edited -
About two months ago i kept getting a message that my printer was not connected. When I got that fixed my scanner no longer worked and I haven't been able to find the settings to make it work. This is an excellent printer, in fine condition. Can someone please help?
Hello dcguy,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
The support page for your product may be helpful in the meantime: HP LaserJet 3390 All-in-One Printer
I hope this helps!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
What steps are needed when upgrading from a pc to a Mac?
Copy everything from your old computer to your new one.
-
I am overwhelmed with all the updates, changes to new servers, etc. seems like it's everyday. I have had to bring my computer back from blue ( actually more like Northern Lights) screen(s) 3 times in the last 5 months. All crashes have been associated with a download, upgrade, etc. Once with Norton, once with Yahoo, and Java continues to cause me problems. I have a Compaq laptop running Windows Vista (I think), using Internet Explorer 9, using microsoft security (firewall, etc) and Panda virus. My current wireless provider is Comcast --but I can't afford the super fast connection anymore. I am continually having problems with Internet explorer just shutting down or going REEEAALLY slow. I figure it's probably from an update, or add-on, or some nasty "ruin your computer fun" gift from a hacker. But I can't figure how to pinpoint where the problem is.
I don't mean to sound like I'm helpless, but I am not very computer savvy. I am a 52 year old mom who loves having a virtual library at her finger tips and wants to be safe on the net. Thank you for assisting me.Thanks for taking time to respond and for the info on the two free scanners.
I do believe I finally uninstalled Norton - I'll check again. I had AVG for awhile and I unstalled that when I downloaded Panda. The microsoft system security is supposed to alert you when there is a system conflict -- the key words here are SUPPOSED TO.
I am very leary of downloading/installing/updating anything. For a couple of reasons -- one --if there is a system conflict, a virus, bad cookie (probably doesn't even go well with milk), etc -- I don't know how to fix it. I bumble through somehow, probably creating more messes than I had, or at least different ones. If there's a BIG problem and support is needed . . . Did I say SUPPORT?? Panda was the only company that actually spent time with me. Microsoft, HP,
Norton, Comcast, Motorola (modem), and a couple of others ALL refused to help me because it wasn't their problem !!
So is having Firefox as my default browser a good thing or bad?? Will I then have to update/download all different kinds of programs. Yahoo is my email provider and my microsoft email is not currently set up. I have used Firefox before, but not on this computer.
Are there any other programs I should be aware of that might conflict with Firefox.
Are there any ADD-ON's, drivers, plug-ins that might create problems ( I really don't understand all the previous terminology, I just know those are the areas where the problems are always occuring.
Thanks again for your time and information.
God Bless You, Tami (tamaroo47) -
How to get rid of extra bar that comes with new update?
I am a huge Mozilla fan and have used FireFox for many years now. The new update messed up the way I had my browser but I found an addon that let me move things where I wanted them once again. There is one thing I have been unable to fix though - the empty bar underneath the tabs that stretches horizontally for the entire screen. I have unchecked the bookmarks toolbar, addon toolbar and additional toolbar, but whatever bar this is it won't go away.
I completely understand the need for the UI redesign and am not complaining.
I uploaded a picture here.
http://imgur.com/h0f9NRE
As you can see, I like the minimalistic look and this bar is trampling upon that look. Once again I'm not complaining about the new UI, but will this bar be removable in a future update?That's not an extra bar; it's the navigation toolbar that's always been there.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer], click the Options button.
# On the Main tab, under General UI, check "Hide navigation toolbar". -
do you get internet connection everywhere without a plan on iphone 4s and do you get siri
Yeah but if his iP is already saying it's paired the issue is prob something else.
I am guessing it's just not being powered/connected right--I've had a goofy time turning mine on relative to
other BT headsets...
With it in your ear try holding down the power button till you hear ascending chimes (descending=off).
After it's on you sometimes need to tap it once briefly (hear a beep) and then you'll see the little BT symbol on the iP if it's connected.
Try that.
Maybe you are looking for
-
I'm getting my "new" iPad on Friday. I'm replacing my "original" iPad (1). Since I preordered and will be receiving my iPad directly I will not be picking it up from the Apple store, so no set up from them. Can someone walk me thru what I must to
-
Do I need to register my Ipod for warranty?
I really need to know. And please tell me how... Thank you
-
SLDCHECK fails in XI - SLD running on Solman server
Dear All, I have SLD configured on my solution manager system. All systems including XI are updating data in SLD -> Technical Systems. My problem When I execute SXMB_IFR, SLD web page opens up fine. But in transaction log I see following: Calling fun
-
CF11 and CF8 on same server.
Hi, I need to install cf11 on the same windows 2008 server as an existing cf8 install. I realise it would be better to have 2 servers but in this case thats not an option open to us so I need specific help with the 2 installs. The current CF8 is usin
-
Smart form template size problem!!!
Hi Experts, Now I met a pronlem about smartforms template. the cell in the template is set to 16CM width(which is enough) and height is only 3.5MM. and I define the sytle with font is 8pt. I input the text for the template and all check is fine. but