Do I need to install a coded pack on my system - premiere cs5

1. I installed K-Lite Codec Pack Could it interfere with my system?
2. Is there a recommended version of QuickTime for win7 64bit? (I installed the standard version on apple site and since the screen flickers for a second when i open premiere, Is this normal?)
3 . Is there any special setting for optimizing performance of my quadro 4000 video card?

Sarah,
I installed K-Lite Codec Pack Could it interfere with my system? [Block Quotes do not seem to be working today.]
Yes, it certainly can.
I recommend against installing aiy CODEC pack. One of the modules installed by K-Lite is FFDShow, and it has caused all sorts of problems with Premiere.
Which CODEC(s) do you need specifically?
I would get those, and install ONLY those. I also recommend going to the source, where possible, rather than a "free" version of the same CODEC. Now, there ARE some great CODEC's, that are free, like Lagarith Lossless and UT, but for a lot of the CODEC's, the commercial versions will be a better choice.
Good luck,
Hunt

Similar Messages

I need to install the PDF Pack forum

How I will be able to edit a scanned document did I need to have installed first the PDF please let me know
Gardenia Saumell

Hi Gardenia,
To edit a PDF that was created from a scanned document, it's necessary to first perform Optical Character Recognition (OCR) on the file. You can do that with Acrobat, so you can either get a subscription to Acrobat from cloud.acrobat.com or you can download a free 30-day trial of Acrobat from www.adobe.com/products/acrobat.html.
And, if you want to convert the PDF file to a format that you can edit, such as Word, you can get a subscription to ExportPDF or PDF Pack (which includes ExportPDF). ExportPDF performs OCR by default when it converts PDF files.
I hope this helps. Please let us know if you have additional questions.
Best,
Sara

Need to install Adobe Document Services in ABAP system

Hi Experts,
We have a requirement for installing ADS on a SAP SRM ABAP NW7.4 system. I have seen the installation guide but it refers to a JAVA system. Can you please guide me regarding the same?
I have seen this doc as well as it refers to JAVA and ABAP systems:
ADS Configuration in Netweaver 7.3 | SCN
Thanks for your help!
Regards,
Asad

find below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?overridelayout=true
Thanks
Siva

How do you install/upload a device pack on CUCM System Version: 9.1.1.20000-5

We received our new DX80. On the CUCM 9.1.2 phone list the DX80 is not listed. I believe we need to install the device pack or does the CUCM still needs to be upgraded.
cmterm-devicepack9.1.2.13057-1.cop.sgn.
How do i install the device pack.
Thanks
Wilfred

Check this readme as an example.
http://www.cisco.com/web/software/282074299/102824/cmterm-devicepack-9_1_1_21017-2_Readme.pdf

Need to install web diagtool in my system

Dear Expert ,
please help me on below issue once if you know
i need to install web diagtool in my ep system
but i dont know the process to deploy this on version 700
i checked in note 1045019
but in that note it is not clear to tel how to deploy using sdm
so please reply how can i deploy with sdm and which package type can i need to select in jspm screen
Regards

iam looking for which package type needs to select in jspm screen after executing sdm
JSPM and SDM are two different tool. Once you deploy the SCa file on EPS\in directory, you can call SDM and from that screen you can select the file which you moved into EPS\in and you can deploy that.
Regards,
Subhash

How to install JDK on LINUX Ubuntu on system with no net/wireless?

Hello!
I need to install JDK on LINUX Ubuntu on system with no net/wireless connection.
What are the commands?
Thank you!
Edited by: 800512 on 07:29 10/01/2011

- Download your release of choice from http://www.oracle.com/technetwork/java/javase/downloads/index.html
- Put the file on a USB thumb drive
- Mount that drive on the target machine
- Follow the installation instructions.
The Linux/Ubuntu downloads of the JDK are offline installers (i.e. the downloaded file contains everything that's required). Only Windows currently has an online installer (smaller initial download, but requires a net connection for the actual installation)
Alternatively: install the OpenJDK from the official Ubuntu packages using apt-zip (http://wiki.debian.org/AptZip).

Need to install language pack on reference machine before capturing image?

we have captured image via MDT 2013 using sysprep and capture method so how integrate or add language pack? need to install language pack on reference machine before capturing image?

You don't HAVE to install them on the reference machine. Here are some examples, both online and offline:
http://www.windows-noob.com/forums/index.php?/topic/3251-customising-windows-7-deployments-part-4/
http://scug.be/sccm/2013/01/04/how-to-install-windows-7-language-packs-online-during-osd-task-sequence-or-in-your-hybrid-base-image/
https://sccmentor.wordpress.com/2013/06/11/add-language-packs-to-an-offline-wim-file/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Need help installing my graphics driver in windows vista via boot camp

New to mac so first time on forum as well.
Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
I am currently using below.
Mac mini Mid 2011 processor 2.5 GHz Intel Core it
Memory 4 GB 1333 Mhz DDR3
Graphics AMD Radeon HD 6630M 256 MB
Software Mac OS X Lion 10.7.5
Installing windows vista home premium 32 bit
I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
Advise?
I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
What is the driver i need to install to get these games working? What do I need to do or what am I missing???
Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
Any and all responses will be greatly appreciated i have been at this everyday for hours.

Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade to leopard? Help!!

I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade from tiger to leopard? Help!!

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

XP Service Pack 3 successfull install & upgrade, but became slow the system...

Hellow Guys i need your help. i try to install the services pack 3 on my Computer Windows XP service pack 2, because of required for skype after i install, the skype its working but i noticed that became slow if i open others browser like My Computer and
if i type some word become slowmotion..
i need your help guys!
Thanks

Hi Toto Almario,
Windows Forms Sample Applications is about "Discuss the Terrarium, TaskVision, FotoVision and IssueVision sample applications." If the problem is about Windows XP SP3, then you'd better consult some end-user forum. Such as
http://answers.microsoft.com/en-us/windows
However, maybe you need to uugrade your system, XP is out of support date http://www.microsoft.com/en-hk/windows/enterprise/end-of-support.aspx
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with Acrobat 8.12 keeps trying to install Japanese Font Pack

I have a client who received a pdf file and when she opened it she was told that it needed the Japanese Font Pack. I gave her admin rights but it still keeps doing it. My pc with the same setup works perfectly fine with the offending file. Now everytime she opens any PDF it tries to open the offending file first and load the font pack. I was able to go into the registry and remove the keys that mention the file and Acrobat works fine as long as we do not try and open that file again. We have installed the font pack separately. The offending file opens fine in Reader. Any idea why this would keep happening and if there is a solution to stop it from happening. Thank you.

Actually, since I started getting the security warning, I haven't tried it on another machine. You think this information might be only stored on my machine? It's worth trying... Thanks!

BT2010 Installed Cum Update Packs for Adapters and getting run-time errors with WCF-SQL

The process has been working fine for months. Then we installed Cum Update packs to BT2010 (I'll get the exact C.U.'s from our admin guy) and last night got probably 20 errors similar to below.
   - Installed CU6 for BT2010
   - Installed CU3 for LOB (Adapters)
The SQL stored proc returns a mix of strings, integers, Guids, and dates; the BizTalk schema looks like matches perfectly. The stored proc runs fine in SSMS.
Got two errors for each, 1 in XLANG/s for the orchestration, and 1 for the Send port that calls the WCF-SQL adapter from the orchestration, and also 1 warning.
NOTE: This orchestration runs every 15 minutes 24x7. It calls the Stored Proc to find out which extracts it needs to create. Most all the extracts run at night. So if I run the stored proc during the day, it normally returns an empty result
set. Yet, the error below is happening every 15 minutes, even when the result set is empty. How can it generate a data conversion error when there is no data to be converted?
ORCHESTRATION/XLANG ERROR:
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Common.Extract.Orchestrations.EFSRExtractHandler(2b35190e-5f11-e360-9ae8-daaf0372cbc3)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: dc354922-73ef-46fc-ac3d-dbf793e5aaf8
Shape name:
ShapeId:
Exception thrown from: segment -1, progress -1
Inner exception: An error occurred while processing the message, refer to the details section for more information
Message ID: {066027B8-4750-4D63-A746-1390E9959E49}
Instance ID: {5A978538-5DD7-40D1-8826-D0486D129F84}
Error Description: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
   at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
Exception type: XlangSoapException
Source: Microsoft.XLANGs.BizTalk.Engine
Target Site: Void VerifyTransport(Microsoft.XLANGs.Core.Envelope, Int32, Microsoft.XLANGs.Core.Context)
The following is a stack trace that identifies the location where the exception occured
   at Microsoft.BizTalk.XLANGs.BTXEngine.BTXPortBase.VerifyTransport(Envelope env, Int32 operationId, Context ctx)
   at Microsoft.XLANGs.Core.Subscription.Receive(Segment s, Context ctx, Envelope& env, Boolean topOnly)
   at Microsoft.XLANGs.Core.PortBase.GetMessageIdForSubscription(Subscription subscription, Segment currentSegment, Context cxt, Envelope& env, CachedObject location)
   at Common.Extract.Orchestrations.EFSRExtractHandler.segment1(StopConditions stopOn)
   at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
SEND PORT ERROR:
A message sent to adapter "WCF-Custom" on send port "Send_SQL_Orch_Call_GetAirportsForExtract" with URI "mssql://QADBAlias.datacenter.local//QTAviation?" is suspended.
Error details: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
   at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
MessageId: {C1FB3913-42EB-4957-9289-16D03B02674E}
InstanceID: {46C9D190-902F-48CE-86CF-D8C3C5B8944D}

Hi,
About the error System.InvalidCastException: Failed to convert parameter value from a String to a Guid
, maybe the field on the database is varchar(string type).
And you can refer to the similar discussion:
http://stackoverflow.com/questions/12816641/failed-to-convert-parameter-value-from-string-to-guid
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable install Japanese Font Pack to Win7 English

Dear Experts,
I need to install Japanese Font Package on Windoes 7 English, however I could not install the font pack FontPack1000_ja_JP.msi due to the error,
"This installer requires Adobe Reader X installed on your system. Please install Adobe Reader X before running this installer."
Even the latest Adobe Reader X 10.1.3 is already installed on the system...
Thank you in advance for your help.
Here is my pc sysinfo,
OS Name: Microsoft Windows Vista
OS Version: 6.1.7601 Service Pack 1
Installed plug-ins:
C:\Program Files\Adobe\Reader 10.0\Reader\plug_ins\Updater.api
    Version: 10.1.3.23
    Creation Date: 2012/04/04
    Creation Time: 2:53:52 PM
Best regards,

The Japanese Reader version already includes the Japanese fonts, so it is usable for this purpose. Is this workable for you, or would you still like to try installing the Japanese font pack with the English Reader version?
Hiro.Naka wrote:
Yes, it is installed as default installation, I don't know why it's not recognized.
I don't know that either; most likely it is some registry entry that is incorrectly set.
What I would try if I could not get the Japanese font pack installed with English Reader:
uninstall font pack and Reader
run the Acrobat Cleaner tool
reinstall Reader and font pack
If that does not work, then I have no more ideas.

Do I need to install Oracle database 12c on PC to create tables for Weblogic server

Hi,
I am new to WebLogic and I am following a book Java EE Development
with Eclipse published by PACKT Publishing to learn Java EE. I have installed Oracle Enterprise Pack for Eclipse
on the PC and I am able to log into the WebLogic Server
Administration Console and set up a Data Source. However the next step is to create
tables for the database. The book says that the tables can be
created using SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic
Server Admistration Console. Aslo there is no SQL Command line
in DOS.
I have put a previous question on the Oracle Forum about the above and I was advised to use SQL Plus
to create the tables for the weblogic server but no mention was made of installing Oracle database.
I have downloaded InstantClient SQL Plus and Instantclient Basic on a PC and
put the files into the same directory C:\SQLPlus but now I am having a problem in that it is
looking for a username and password when I run the sqlplus.exe file.
Now I assume that I need to have an installation of Oracle databse on the
PC so as to be able to use SQL Plus. Am I correct in this or can I create tables for the
datasource in weblogic without an Oracle database?
Thanks in advance for your help. Brian

You should install it separately and also need to change the OBIEE's user.sh to tell it where is your Oracle client installed.

I need to install the SOLMAN, in my landscape or another server ??

Hi experts,
My landscape is the typical landscape; Production Server, Test Server and development Server.
I need to install the SAP Solution Manager; This installation would have to do it in some of my existing servers (Production, Test or Development) or it would have to do it in another one?
Thank's
Douglas V.

Hi Douglas,
Before deciding where to install Solman also take into account below checks -
1] Incase you will be using Solman diagnostics+Wily introscope functionality of solman, I would certainly recommend to install solman on a separate host as these tools hog lot of memory resources.
2] For basic use of solman - EWA, install keys generation, ccms...you can think of installing on existing box - but still it should be strong in configuration. As SAP is adding lots of features in EHP packs and sooner or later you will need to use those.
My 2 cents. (rewards points if useful)
Thanks

Do I need to install a coded pack on my system - premiere cs5

Similar Messages

Maybe you are looking for