Do_run(): rtld hand not shaken

Im compiling my program from command line using f77 on a Solaris 9 system. Compiling and linking goes fine, when i try to start debuging using sunstudio -E 'myexecutable' the IDE fires up and it stops on the first line, when I try to step forward I get the following errors:
Running: <executable name>
(process id xxxx)
terminating signal 9 SIGKILL
dbx: warning: do_run(): rtld hand not shaken
dbx: Cannot open psinfo -- No such file or directory
dbx: Cannot start execution

For me specifically
OLD:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/lib/32:$ORACLE_HOME/lib/32
NEW:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/lib:$ORACLE_HOME/lib
The environment variable had 32-bit library directories in it's path instead of 64-bit.
The reason that this seems to be important, is because on older platforms 32-bit was the default and on Solaris 10, 64-bit libraries are the default.
Removing all references to 32-bit did the trick for me.
Message was edited by:
Derrick_Tate

Similar Messages

I would like to make free hand notes on PDFs in iBooks. How do I do this?

I do quite a bit of downloading of articles/PDFs into iBooks. I would like to be able to make fre hand notes on the articles when I read them. Is this possible? Or will it become available?

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

Why is the Hand not showing over button on one level?

I have site with multiple .swf files working on levels. many buttons working properly - but when I get to one level - the cursor is not changing to a hand over any of the buttons. I don't know how to trouble shoot that at all. I am using as2 Flash player 11.
When I test the site locally - I get the hand - when I test on the internet - I don't see the hand on this one level only. And - I tested on a mac with an earlier operating system - I did get the hand. What should I do?
thanks for your help ~ Judy

if the button responds to a mouse click then there's nothing covering them.
the only way, i know, you can have a button respond to a click but not display the hand cursor on rollover AND have it be a flash issue is if useHandCursor was assigned to false.
however, there are browser issues that can cause this problem and you may be able to prevent them by making sure your embedding html has wmode="window" (or, just about anything other than "transparent").

CP5: Roll-over hand not appearing on button

Ok - I have 2 different buttons and one the hand appears when the user rolls over the button and on the other it does not (even though I have the option checked in properties).
The two types of buttons I have:
1. transparent button over an image
2. text button
The transparent button over an image is the one having problems. I am not sure what I am missing - the button works, it goes to the correct place, but the hand that lets the user know to click is not coming up.
Thoughts?
Sarabeth

It sounds like you have inserted the image inside the button. That is a viable approach, having the image inside each button on the over frame (only, not in the hit frame)... saves you from needs to use any code. You make the button change color by cg=hanging its color in the over frame as well.
If you want to use actionscript for this, then you'll need to show what you have tried already.

Cursor.HAND not displaying.

Hai folks,
i have two javafx custom components. i'll show one component at a time. i'll show another component based on the user selection.
in my first component ,i set cursor to Cursor.HAND . it shows initially perfect.
after showing the second component , again i set the second component visible property to false. now i set the first component visible property to true.
but the HAND cursor is not showing ?.
can any one tell me how to resolve this problem.
content:[
c1 = Component1{
cursor:Cursor.HAND
visible:true
translateX: 10
translateY:10
c2 = Component2{
visible:false
translateX:10
translateY:10
SwingButton{
action:function():Void
if( c1.visible )
c1.visible = false;
c2.visible = true;
else
c2.visible = false;
c1.visible = true;
.....Thanks.
Regards,
Mani

Hi Charlie
Is there another object in front of the Click Box? Perhaps a
Rollover of some sort?
Just pondering out loud... Rick

Duplicated my library by mistake, photos not music, deleting over a thousand photos by hand not fun, any shortcuts?

duplicated my library by mistake - too late to undo -- deleting over a thousand photos not my cup of tea, any shortcuts , suggestions??????

Describe how you duplicated your library? Do you have a recent backup of your library? Where are you seeing these duplicates: in iPhoto or via the Finder?
OT

CHAR's value in the query but not in the report??

Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.

Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh

Satellite A660 - Will not boot up and HDD boot fail

Hi,
firstly thanks for your time.
Model: Satellite A660 (PSAW3A-07U00R)
The problem started yesterday, the computer was going slow as an application closed, so I held the off button untill the pc turned off. When I restarded the laptop it went to a screen saying: Start windows normally or repair Windows (recomended)
When started normally it just hangs at a blank screen, the repair Windows recommends a system restore to earlier point which didnt work. As it just hangs again. I tried pressing F8 and starting in safe mode but again it just hangs. Then after a few times trying safe mode and another system restore the computer then hangs when I press F8. After this the computer goes past the Toshiba logo screen with F2 and F12 options (which both still work), and then it comes up boot failed then goes blank and comes with boot failed bootfailed with some numbers and letters, then it goes to a small box titled boot menu with 4 options.These are
HDD/SSD Toshiba MK6465GSX
CD/DVD MAT****ABD-CMB UJ141ES
FDD
LAN
If I press ESC it goes through the bootfailed loop and ends up at same screen, if I press enter on "HDD/SSD Toshiba MK6465GSX" then it quickly comes back to screen and at the bottom it says [HDD/SSD Toshiba MK6465GSX] is failed.
I dont understand why it got worse over time. Can anyone think of why this has happend and more importantly how can I get my pc working again? Note: holding 0 then starting does nothing for me atm
regards, Matthew

All you people looking here on this dead thread.....
Toshiba A660 laptops are renowned for having hard drive fails and boot up problems after grinding to a halt.
My solution (after losing 3 hard drives [and a terabyte of family treasured times]) is the following.
Use MALWAREBYTES (free download and use for 28 days)
Scan and fix. Mine found over 300 trojans that 2013 Norton 360 could not find.
Re-boot into safe mode.
SCAN again.
Re-boot and empty the malwarebytes repair files it retains...
Run Norton/McAfee (whichever you have) and you should still have no issues.
Make a back-up repair disc. Ooooops......no you cant...........at least my laptop can`t.
I don`t know why.....
Tell me tosh..... why does windows x64 refuse to allow me to make a system boot disc (even though the laptop is all driver updated and Windows updated)?
Uninstall MalwareBytes when Norton/McAfee tells you there will be a conflict between the two programs.
It tells you to re-boot after uninstalling it.
Then when it re-boots you get a black screen. You cannot even get to bios. You think ytour laptop is turned into a brick frisbee. You pull out the battery in frustration after five minutes.
You replace and re-boot....but again you get no bios or boot up.... you think its destroyed the Bios or graphics somehow....youo can hear the hard-drive but you have no clue whats going on..
Around this time you shake the laptop in frustration.....
Calm down.
Switch on and leave FIFTEEN MINUTES....Ten of which will be a Black nothing screen with maybe a single white underscore line in the top left corner.LEAVE IT ALONE.
Make a sunday dinner for ten people....When you go back to the computer it will be up and running.
When you re-boot again, it will be dead black for five minutes...then boots up... you still think it has a problem... LEAVE IT.
When you reboot again it should work perfect (assuming you have not been overheating it by using it on a cushion on your lap and overheating the insides [use a laptop fan tray]) if you have not shaken your hard drive or caused scrambled damage by pulling the power fifty times like some people do.
I have lost three hard drives and thousands of Gigabytes of treasured family memories discovering the secret the hard way.
Enjoy.
Buy a different brand next time.
ALL Windows system files should be on a SWITCHED (to update) version of Windows.
Spinning drives should be for Data only.

MTO Strategy consider the stock in hand

Dear Experts,
AM new in MRP Field, pls advise me about pure MTO Strategy which consider stock in hand. MRP run should consider the available stock for net requirement calculation. I tried with strategy 20,but it is not consider the stock.Pls advise,
Regards,
Vijesh

Vijesh,
MTO by definition will only consider Sales order stock. This is the main planning difference between MTO and MTS. Thus, if you have generic stock on hand (not sales order specific) it is supposed to be excluded from MRP planning.
If you wish for MTO planning to consider generic stock, you have to first convert the stock to Sales Order specific stock (Special stock type 'E') using a Material Movement transaction. Or, you can stop using MTO and use an MTS strategy, such as 40.
For more info about MTO planning see http://help.sap.com/erp2005_ehp_06/helpdata/EN/f4/7d2ed844af11d182b40000e829fbfe/frameset.htm
Best Regards,
DB49

Mouse arrow pointer changes to a hand

In Pages my mouse pointer arrow changes to a hand - not the “baseball mitt”-type hand (that’s the best way I can describe it!) with a pointing finger that appears when using Safari and you point to a link; not that hand, but the hand you get with Adobe Reader when you’re viewing a pdf. Sometimes the hand goes away and the arrow reappears, but then the hand comes back. Sometimes I get not a hand but a cross-hair. I read somewhere that I must go to Library>Internet plug-ins, and delete Adobe Viewer plug-ins, but I went there and couldn’t find any. How can I get the arrow back permanently?
MacBook Pro, Retina, 15-inch, Early 2013. OS X 10.9.4
2.7 GHz Intel Core i7 16 GB 1600 MHz DDR3
I use Pages ’09 Version 4.3 - Pages 5 is useless to me

Thank you for your attempt to help me, but I'm wondering if you read my post carefully enough because I said it is not the "baseball mitt" (I've also seen it described as a "Mickey Mouse glove") grab cursor/link pointer that is giving me problems, i.e. it is NOT this icon that is causing me the trouble:
What my problem is, is that sometimes when I am working in Pages (even when it is a text-only document with no images), the mouse/trackpad pointer arrow, i.e. this:
changes into this:
This as I said, is the "Hand Tool" that I get on the screen when I read a pdf in Adobe Reader. It is a normal Adobe icon one sees all the time when one is using Adobe. See bottom right corner in the pic below.
I know that that's what it is because if I switch my Mac on in the morning to work on it, and I open Pages, and Adobe Reader is NOT open, I have no trouble and the mouse arrow pointer appears as it should. But then if I later open Adobe Reader, and read a pdf for example, when I go back to Pages, sometimes - not always - the mouse arrow will change into the Adobe Hand Tool. Sometimes it repeatedly changes between the arrow and the hand WHEN I ONLY HAVE TEXT ON THE PAGE - it has got nothing to do with hovering over images and shapes. If I want to select something from a drop-down menu, sometimes I will get the hand again (NOT the "Mickey Mouse glove") instead of the pointer arrow. It is an intermittent problem; it comes and goes. Sometimes I can work for hours and
there will be no problem, but then suddenly the problem will recur - in a Pages document with text only, no images.
By the way, the cross-hairs that appear sometimes (very seldom compared to the hand), also instead of the pointer arrow, are also the cross-hairs that I know from Adobe, not the ones that I know from Apple. There is clearly some problem of "interference" from Adobe Reader into my Pages programme - why I am I seeing icons from Adobe Reader (the hand tool and the cross-hairs) in Pages, icons that replace the arrow pointer, and how can I stop this - that's what I want to know! I might add that sometimes when I go into Adobe, this hand icon flickers very rapidly for maybe 20 seconds before it stabilises, which again indicates to me that there is some problem with it. I searched this forum some months ago to see if anyone had a similar problem, and I did find someone with exactly the same problem, but I can't find it now. The advice given to that person was to remove the Adobe Internet plug-ins, but I can't find any in Library>Internet plug-ins, and also to submit a bug feedback report to Apple (I have done that).
I might add that in Safari, the problem also happens. The arrow pointer is replaced by the hand tool - NOT by the link pointer "Mickey Mouse glove". In fact sometimes in Safari the link pointer "Mickey Mouse glove" is replaced by the hand tool.
So I hope I have made the problem clear! I don't think I have misunderstood what is going on.

App for typing notes and drawing freely?

Hello,
I am searching for a good iPad app that lets me type notes with the screen keyboard and draw freely anywhere if needed. I have used Pages for typing and now I discovered Paper which is quite nice for drawing. Only if these two could be merged into one.
PaperDesk and Moleskine are the ones I have liked the best so far. PaperDesk lets me zoom for drawing so it might be my favorite so far. I just started using the Jot Pro Stylus for drawing and find it pretty good.
Anyone of you found something even better or liking it so much that you have stopped searching..?

I would suggest using Evernote to type notes and then an app made by Evernote called 'Penultimate' for taking free-hand notes, if you create an account (very simple to do) and sign in on both apps, your handwritten and typed notes will sync into the main Evernote app. Handwritten notes are even searchable in the same way as a typed note through image recognition technology.

EOS Rebel T2i: the in built flash is not working. What is going on?

I have my EOS Rebel T2i since 2011. But now, the flash compartment is not functioning right. Any time I need use the flash, the flash's "door" does not open and give me a error message.
What is going on with the camera??
Thank you,
Ingrid

The three noises you hear are the camera pulling back the latch to allow the flash to pop-up. The catch is spring-loaded and motorized. The flash is also spring-loaded so that once the catch is retracted (looks like a small hook) the flash should just spring-up into firing position.
When the flash is pushed down to close, there's a tiny button which it presses (a micro-switch) which tells the camera that the flash is down. When the camera attempts to release the catch, it expects the micro-switch (button) to pop-up thus indicating that the flash popped up. If it does not, it tries again. After three tries, it will give up and display Err 05.
The fact that you hear the noise tells us that the motor is working.
As you inspect the camera body and specifically the area of the flash, does everything look ok? Any signs of damage?
There could be dirt jamming the mechasm. If anyone has spilled anything on it (e.g. a sugary drink) then it could sticky.
You can *try* this: Press the button to raise the flash while applying a _very_ gentle prying pressure (do NOT use strong force -- don't want to break anything. Just give it a tiny assist so that if it is merely sticky it might just need a little help.
If it is not physically damaged, then it likely needs to be cleaned.
I have seen articles on the internet that suggest you oil it... I would NEVER apply "oil" to my camera. I would probably use a can of compressed air and blow out the hinge area and without fully closing the flash, work it up and down a few times so that if a bit of dirt or dust is jamming the hinge then you would hopefully work it free. Incidentally... don't use compressed air cans on any camera optics. There's a propellant in the can and it can leave a residue on surfaces if you aren't careful. Normally if a can is not shaken and is held "level" the propellant will not spray out. But it will spray out if shaken or if not level and that propellant will leave a hazy residue on the surface.
If this doesn't work, I would not "oil" the camera (that oil can manage to get into a lot of places where you don't want it and a small expense could turn into a larger one) -- I would send the camera in for professional service.
Tim Campbell
5D II, 5D III, 60Da

My apple mouse is showing a cross or hand instead of an arrow

my apple mouse is showing a small cross and a hand, not the usual pointer.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Sent Emails and Account info not showing

I've just downloaded iOS 7 to my iPad 2. Everything seems OK except my different email accounts are not showing in the account listing. I'm receiving mail from both accounts and can send but they are showing collectively in Mailboxes under All Inboxes. I also can' access the Sent emails. I can see it in the iCloud list but when I click pon it to view it appears to send mails to iCloud and I don't know hoe to recall them from there? Any info would be great appreciated.

Online chat said there is maintenance, btcare on twitter says they are not aware of any issues even though one other twitter post says he can't access account, case of left hand not knowing what right is doing - typical BT
Also can't change weather location on BT home page.

Upgrade was not activated

why doesn't my upgraded storage on iCloud from the free 5gb to purchased 20gb not showing up in my accounty?

Clyde77 you right. It was a case of the right hand not knowing what the left is doing. Thank you for the headsup. You reminded me of the two accounts. Thanks.

Do_run(): rtld hand not shaken

Similar Messages

Maybe you are looking for