Do these work in windows?

Hello,
I would greatly appreciate any help with the videos on this page
http://yektai.net/Poems/index.html
The videos are of long poems so be advised that the smaller files are still 40mb and the large ones about 180mp. The poems are not in english so the complaints that have come in are also not in english so it makes it hard for me to troubleshoot (english is all I know). I had a friend with a windows machine test the site and it worked for him but a trip to the library revealed problems. No error codes to report but no video either.
The videos were encoded for fast start with visual hub.
thanks

Thanks for trying it out for me. Two successful tests and two failures. I am not windows savvy at all and the only information I could extract from the library computer was the IE version of 7.0.5730.11. Is it possible that these videos could work in only updated versions of ie 7? Is there a "best" way to add a video to a site to make them more windows friendly?
thanks again for trying it out for me.

Similar Messages

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

SoundBlaster 5.1 not working in Windows 7

)SoundBlaster 5. not working in Windows 7E Hello all, I installed a SoundBlaster 5. VX sound card into my system: A Fujitsu-Siemens Celsius M430, 3.4 GHz Intel processor, 2GB of RAM and a fresh installation of Windows 7 Ultimate (retail version). I initially tried to use the drivers provided on the product CD, which during installation gave me a bluescreen. After reboot, I downloaded the latest drivers for Windows 7 from the CLE website. But still, the drivers seem to not install correctly - I get a message that the SB 5. VX is ready for use, but the speaker symbol still shows a red cross and when I click on it, Windows suggests me to re-install the drivers, which gives me the same results even after rebooting. In the Device Manager, the device has a yellow exclamation mark besides it. Additonally, I may mention that the onboard sound device is a SoundMax onboard system, which I now have disabled. Anyhow, the SounbdBlaster is recognized by CLE AutoUpdate software (but needs no update according to the mesages). I'm a bit thrown up, did anybody encounter the same problems or have a solution yet? Cheers Dennis

I have a subwoofer and 5 speakers (2 for front, 2 for rear, 1 for center)...Philips MMS460 5.1. Connection to the on-board RealTek HD Audio is simple, orange for the subwoofer, green for front and black for rear.I have already tried downloading the latest drivers from the motherboard manufacturers website,I have tried connecting the subwoofer connectors to different jacks (reversed black and green).
I have experimented with the settings in the RealTek HD Audio Manager and Control Panel->Sound windows. Nothing works.
These exact same subwoofer and speakers worked perfectly fine in vISTA Home basic
1. Disconnect the speaker system from the pc rear audio panel
2. Remove the on-board audio using the "Add or Remove Hardware" option in Control Panel
3. Reboot the pc, install the driver. Re-connect the speaker system.
4. Using the Sound applet found in Control Panel, configure the speakers for surround sound
5. Reboot the pc.
And now resume all of that ...i have been on Realtek hd audio manager->Speaker configuration set on 5.1 making the test ...EVERITHING WORKS FINE but ...finally when i open for example WINAMP AND PLAY A SONG ....is only played on front *or stereo..So on what im wrong?

I-tunes not working in Windows 7

I have been using i-tunes for a couple years without problems. Recently I keep being told i-tunes is not working and Windows shuts it down. I have repeatedly reinstalled it - earlier times as a "repair", then have uninstalled i-tumes and reinstalled it, but the problem persists. Lately it has said something like "Apple Device Manager not installed", but since i-tunes shuts down there is not a way to care for that in i-tunes, if that's where it needs to be activated.

yeah in some cases creating a new iTunes library file could fix issues like that mostly because when iTunes tries to access a bad library file iTunes will take so long to analyze bad information and it eventually crashes for issues like that you should try these articles
http://support.apple.com/kb/TS1421?viewlocale=en_US
http://support.apple.com/kb/TS1717?viewlocale=en_US

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
How do I resolve this issue? How do I get the the sync process to add only new entries?

This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

Qosmio G40: TV Tuner not working in Windows 7 64bit

Hi,
After months of patience and following the drivers-info on the Toshiba website,i found it was time to replaced my Vista32 Ultimate with Windows7 Ultimate. It seemed that all drivers now have a 64bit version working under Windows 7, the missing drivers/software could be replace with the Vista 64bit versions. Unfortunately i got some problems with the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner.
Just searched a couple of ours for a sollution to the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner (x64) problem with Windows 7. In hardware manager it shows an yellow triangle with an exclamation mark, telling me that there is a problem with the device. Via properties i get an error with code(39).
I have downloaded the drivers from the Toshiba website which returns the following files:
tisdbt1a64.cab
TISDBT1A64.inf
TISDBT1A64.sys
and an additional 'setISDBTDriverParameters'-regkey.
1) When i try to replace the drivers by via the properties in devicemanager, i get a message back that the best drivers are already installed and there is no better driver found.
2) Install manually
There are no instructions to install the downloaded files, nor the regkey. When i try to install the 'inf' file with rightclick, i get a installationerror the the selected inf-file does not suppoert this installationmethod.
3) When i try to use 'install old hardware', the system ends in blue screen when driver is selected and installed. After booting the system again falls into blue screen. So i had to remove the device using 'save mode'.
4) I also tried to install Vista 64bit, same behaviour as (3)
5) I tried both TV-Tuner 2_1_11-ISDB-T and TV-Tuner-2_1_1_0. However, imho the former should be used.
Finally i reinstalled the complete system (from scratch) but same problem occurs.
Any suggestions? I found different threads about only tips are given. Almost no one describes a working sollution.
I have not found any sollution

I have read indicated thread over the weekend. This thread also points to other threads which should have info about correctly installing the drivers. Unfortunately, all these threads points to eachother without really telling how to do a correct installation. Some users seems to be able to use the Vista drivers or the G50 drivers but many others don't. It's strange though, all G40 systems should have the same hardware, no? And after installation of Windows7 they are all equal, no?
I haven't installed the G50 driver because
- there is no indication about the type of TV Tuner. I have a TV-Tuner-ISDB-T and it seems that the indicated driver is for the 'TV-Tuner' only (without IDSB-T opton).
- These drivers are dated 2009 whereas the drivers for G40 are from april 2010.
(although they have a creation date of march 2007 ???)
- Other users reports same probs with G50 drivers
I tried the G40 32bit, G40 64bit (Vista and Windows7) but none of them work. With the Vista drivers I got nothing but blue screens which finally forced me to reinstall Windows7 from scratch. I don't want to go to the process of reinstalling Windows7 from scratch again...
So, the G40 drivers are published by Toshiba in april 2010. I may trust that these drivers are the ones to be used on my machine? If not, why should i trust all other drivers?
I have noticed that there was an update installed for both TV- and Fingerprint hardware immediatly after installing Windows7. So after installation of W7 and reboot of the system i was notified that there were some updates which includes an update for both hardware components. I installed all drivers and software from Toshiba website AFTER this update installations. This resulted in a problem with both TV- and Fingerprint hardware.
In my second attemt to install Windows 7, i tried to block the automatic updates immediatly after installing Windows7. Don't know if it was succesfull because installation started immediatly and i had to 'cancel' the installation. After this 'cancel', i wasn't sure if something was already installed. Nevertheless, at that point (with no other updates installed), i installed all drivers and software from Toshiba website (with no reboot in-between). After this installation i rebooted my G40 and all but TV-hardware worked (including the Fingerprint Reader). Then i tried to update the TV-drivers without any luck, untill this moring...
This morning I was notified that there were updates to be installed. When i checked out which updates, an update for the TV-hardware seemed to be included. I decided to install this update and guess what... problem is gone!
So here is the list of my 'scucessfull driver installation' with my wireless internet connection active.
(Maybe it's a beter idea to make sure the laptop is not connected to the internet!)
Initial installation:
1) Install Windows7 from scratch
2) After initial installation, switch-off auto-updates for windows
If procedure to install updates is started (otherwise go to 4)
3) cancell automatic update install, be sure that update TV drivers/Fingerprint Reader are NOT INSTALLED
(eventually go back to recovery point)
4) Reboot
Install all available Toshiba drivers and software
5) Install all Win7 64bit drivers/software (skip TV drivers)
6) Install all Win7 32bit drivers/software
7) Install all Vista 64bit drivers/software
8) Install all Vista 32bit drivers/software
9) Reboot
Install TV drivers
10) Install regkey 'SetISDBTDriverParameters'
(= i changed the regkey from tisdbt1a to tisdbt1a64)
11) update 'TV-Tuner-ISDB-T' driver using 'Hardware Manager'
12) Reboot
Windows update installations
13) Execute windows updates
14) Reboot
Repeat 13/14 until TV-driver update is included in the list
It appears that problems are caused by a windows driver update which is installed for both TV- and Fingerprint Reader hardware immediatly after initial installation of WIndows7. I have no time (use my laptop for work too) to re-test above with installation of Windows7 without a connection to the internet. IMHO this should also avoid installation of the autmatic updates immediatly after initial installation. So, if anyone is trying to follow my steps to do a clean installation of Windows7 on a G40 laptop, please do not connect to the internet when initial installation is in progress. Attach to the interne to perform updates after step 12 and let us know the results.

Ipod Works with Windows, not with Itunes

Hi there. Three members of our family now have ipods. We were using them with 2 computers, with all three on each. It was only about two weeks ago that they stopped working with one of the computers. And not all at the same time, either. The 2nd and 3rd ipods connected to the desktop stopped working at the same time. The first to ever be connected remained working, but then stopped. These working/not working changes occurred around the removing (2nd and 3rd stopped) and then replacing (1st stopped) of our external hard drive. The drive letter for our ipods now reads 'C:', but our local disk has always been 'F:'.
I am using Windows XP SP2, the firmware is 1.0 for all of them. I used to have the latest Itunes and latest updater, but I recently reinstalled the CD that originally came with package, and now I have older ones. I tried everything on the support site's page "Windows sees my Ipod, Itunes doesn't."
I can't restore my ipod because the updator/ipod for windows doesn't detect it.
Thanks for any help.

I figured it out! I thought it had something to do with the ipod being remapped C:. So all I had to do was to change the drive to I: for Ipod, and put my Maxtor back to C.
:. problem solved.

Does creative cloud work with windows 8

does creative clould work with windows 8?. I see windows 7 as a minimum requirement with no mention of windows 8

lewis0,
Welcome to Adobe Community .
Minimum requirements means that you have to have these as the minimum configuration to install the Adobe Products . You can surely go ahead and install the product on a windows 8 PC and it should work fine.
Regards,
Kartikay Sharma

Does iTunes work with Windows 8?

Does anyone know iTunes work with Windows 8? I know 10.7 was just realeased and I wondered if it added Windows 8 support or will I have to wait for iTunes 11?
Windows 8 is not beta anymore, it is RTM although I know a public release isn't until October.
I just want to know if people have it working or not.
Many thanks

I just installed iTunes 10.7 on windows 8.
I can confirm the issues with iTunes on the windows 8 release preview still exist.
Meaning that iTunes does work, but some devices cannot be connected nor synced. This seems to be a driver issue.
For all I know what does work: iPad 1, iPad 2, New iPad, iPhone 4S.
What does not work: iPhone 4.
These I know for sure myself, other devices may or may not work, but I didn't try them myself.

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Will the Linksys WRT160N work with windows vista at all?

Will the Linksys WRT160N work with windows vista at all?
Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
E.g.(Comments like These 'which are not my own')----------
"When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run."
"It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
"It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .."
E.g. (CommentContradicting to what has been said above)------
"Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks

It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

PhotoSmart dont work with Windows 7 ??

I have the following:
HP PSC 1610 All-In-One Printer & a Photosmart M525 Camera and the software that came with it.
On the older dell this worked great and but with the new Dell with windows 7 it dont download.
So I cant use the Photosmart system for pictures and etc. Is there some way to get these to
work on Windows 7 ?? The printer still works and I can also download the pictures to another
site, but not the system that came with the HP equip, as I like the Photosmart system.
Any ideas please let me know.

HP does not have driver or software downloads available for this product in that operating system. Sorry!
I am an HP employee.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Getting old Laserjet printers to work with Windows 7

Hi Everyone,
For those of you, like me, that may have an old Laserjet 4, 5, or 6 I figured out how to get it to work with Windows 7!
First, new computers do not have LPTx ports. So, when you first set up your Laserjet you MUST select a USB port - this is the main problem with getting your old laserject to work on a new computer. MY computer dispalyed USB001 and USB002. Since I have another HP printer installed using USB001, I selected USB002. You will also need a Pararellel to USB adapter cable - you can buy one on Amazon (I paid just $11.87).
Next, when selecting a printer driver you MUST select HP, NOT Hewlett Packard. Scroll down until you find Laserjet 4,5, or 6. NOTE, if you don't see these models, click on the Windows update button in the dialog box. NOTE: This may take a few minutes to display the updated list. Again, select HP and scroll down the list of drivers until you find your model Laserjet (Laserjet 4, 5, or 6).
At this point you should be good. Just finish the install process and make sure to print out a test page.
Good luck !

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lync Server 2010 conference not working with Windows 8.1 and IE 10

Hello,
The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
When using Lync 2013 client we end up with a blank conversation window.
There are no traces in server log, client log or event log.
Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
- Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
- Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
- Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
- Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
Lisa Zheng
TechNet Community Support

Standard Domain Accounts don't work with Windows 8.1 Pro

I have AD running on Server 2012 with Windows 7 systems. I recently purchased a few Windows 8.1 laptops that I connected to the domain. They are fully updated to the latest windows 8.1 version, and all security updates are installed.
When I log in as an domain administrator user, then I can log in. No problems.
However, when I log in as a standard domain user, it signs me off immediately. It says 'Welcome' .... 2 seconds pass... 'Signing Out' and I'm back to the login page. I tried this with Windows 8 systems, and it works but as soon as it is updated
to Windows 8.1, I start having this problem.
Event Viewer does show some errors when a standard domain user logs in.
9009 - Desktop Window Manager - The desktop window manager has exited with code 0xd00002fe
Then,
4006 - WinLogin - The Windows logon process has failed to spawn a user application. Application name: . Command line parameters: C:\Windows\System32\userinit.exe
1542 - User Profile Service - Windows cannot load classes registry file. Detail - The system cannot find the file specified.
I installed Windows 8 Pro using the Dell CD that came with the laptop. I updated to Windows 8.1 using windows store, and then windows update for the latest windows 8.1 update.
I have searched these forums, and made sure that winlogon executable is correct. I have recreated the user profile. I have tried multiple accounts and while they work on Windows 7, and windows 8, they fail on all windows 8.1 laptops.
Please assist. Thank you

Hi,
Try to run the two commands in command prompt:
Net localgroup Users Interactive /add
Net localgroup Users "Authenticated Users" /add
Then what’s the result?
Alex Zhao
TechNet Community Support

Do these work in windows?

Similar Messages

Maybe you are looking for