Do two wifi networks in the same home have to conflict with each other?

I have an Xfinity1 system that requires its own combo modem/router supplied by Xfinity in order to run its system. The premise here is that you can play live tv from any of your devices like computers, iPads and iPhones using their wifi system, and it works well.
I was advised by Apple that my two Airport Expresses, which provided my network before I brought in the Xfinity system, should be reconfigured to "join" my Xfinity network instead of maintaining their own separate network. So I reconfigured everything at their direction, and now my Airports won't stream music or anything else. I called Apple, we checked out my configuration and found out my Airports were set up and working correctly.
Now I have been advised by a senior Apple tech to go back to my original setup with the Xfinity network and a separate Airport Express network. This was late last night, and I was just too tired to do it at that point. So, today I have a phone appointment with that senior Apple tech to change everything back to my original setup.
I would like some input from the community about this situation. Maybe there is more to this than meets the eye. Like why are these Airports currently not streaming music from any of my devices? The Airport icon shows up when I try to stream music, but when I choose one of the two Expresses nothing happens.
The Xfinity system does not stream Apple stuff. Could the problem be that, by joining the Xfinity network, the Airports cannot stream music from iTunes or iPads or iPhones because the Xfinity system cannot accommodate Apple content under any circumstances. In other words, do you just have to have an Apple network to stream Apple content?
HELP.

By default, the WLC code does not try to contain rogue AP's.  Just lots of alarm's and unclassified rogue's.
In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other.  Gets fun.  Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
Good Luck

Similar Messages

  • Can two apple devices registered to same apple ID face time with each other. My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Can two apple devices registered to same apple ID face time with each other? My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

    Has anyone else found solution to Apple devices not 'seeing' each other on Home Share?  I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all.  Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
    I have already tried the following without success:
    1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
    2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
    3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
    4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
    I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other:  "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

    I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

  • Two Iphones on the same WiFi network, using the same Apple ID receive calls meant for only one of the phones.

    My husband and I each have an IPhone 6.  We are using the same WiFi network and the same Apple ID, the phone numbers are different.  When we are at home, both phone receive calls meant for one of the phones.  Call can be answered from either phone.  Is this a new feature and How can I turn it off?

    go into settings then FaceTime then turn off iPhone cellular calls

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • Two separate enterprise WiFi networks in the same building

    I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wanting to bring in our own Cisco WLC 2504 with 3702 APs. But when we brought this up with the main campus they said we can't have two separate enterprise wireless networks in the same building. That their APs will mark our APs as rogues and try to shut them down. There was also mention that they can't share the same channel and that the radios will negotiate with each other to determine how much power they need for coverage. But from what I've read none of that is true. So maybe I misunderstanding something and hoping someone here with more experience can shed some light on this. The only reason we would want to keep their wireless in the building is so when their staff come to our office they can use it. 
    So can two separate WLC/AP systems on different subnets and broadcasting different SSIDs exist in the same building with out causing any issues?

    By default, the WLC code does not try to contain rogue AP's.  Just lots of alarm's and unclassified rogue's.
    In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
    Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other.  Gets fun.  Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
    Good Luck

  • Two user accounts using the same home folder

    This may sound like a silly or goofy question, but I was wondering if anyone knows how to use two different user accounts, but with each using the same home folder?
    I was wondering because there are many different settings I would like to use for different settings. Kind of like a "Spaces on Steroids." When I'm at school, I'd like to use one Network Settings, one desktop and icons, one Dock, etc. And when at home, a different set of each, but still using the same home folder.
    Any help or suggestions would be most appreciated.

    ZooCrewMan wrote:
    So, I figured the easiest was would be seperate user accounts, "Home" "School" "Work" etc., and all have different settings, but still point to the same Home Folder.
    The problem is, most of those settings are kept in the home folder.
    You could probably do what Softwater suggests, with an AppleScript, or perhaps an Automator workflow, but it's not without some serious downsides.  You'd need one for each setup.
    At least one complication would be, any change you wanted to make to each setup would have to be done to that script; you couldn't just drag something into (or out of) the Dock.
    Another theoretical possiblility would be to have separate user accounts, but use the special Shared user folder for your data.  You'd have to select it as a souce or destination for each app you use, but many will remember that from use to use. 
    The complication would be permissions.  When you save a document there, the user that saved it is the owner, with read & write rights.  All other users have read-only rights, so could view and open them, but not update them.  You'd probably want to create one or more sub-folders in the Shared account (for various types of files), and you could probably set a Folder Action on each to grant read & write permissions to anything created in them.
    Then you could set up the desired network location, Dock, and Desktop for each user account.

  • How do I enable opening firefox from two different computers sharing the same home directory without having to delete a lock file (linux).

    I just don't want to have to delete a lock file - which has a purpose - in order to use firefox simultaneously from two locations on the network - where the home directory, i.e. .mozilla directory - is located

    You need to use two separate profiles if you want to have two Firefox instances open at the same time.
    See also http://www.mozilla.org/unix/remote.html

  • My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?

    I have a Macbook Pro and it works perfectly fine on my AirPort extreem until I try and put a different computer, ipod, or phone on the wireless. When I try and put more than one device on the network only one device will receive internet access and the other(s) will get a message saying it is because of a shared ip address. Is there a way to change it so they can all share an ip address? Please help me configure my wifi and devices so that I can use more than one device on the wifi at a time.
    Thanks!

    Hmm... Those two screen shot disagree. the first shows that the duplication was on 192.168.1.64, while the second showed you were using 192.168.1.63. That confuses matters further.
    From the screen that you show, click on the "Advanced..." button in the lower right, then the "TCP/IP" tab.
    SHow us a shot of the screen or copy the text from the "Configure IPv4" line and the three under that (IPv4 Address, Subnet Mask, and Router).
    Then launch AirPort Utility.
    If you have one of the old 5.6.x versions:
    * Click on the icon for your Extreme.
    * Click on the "Manual Setup" button and supply the password if needed.
    * Click on the "Internet" icon at the top.
    * Click on the "DHCP" tab.
    * Give us a screen shot or transcribe the results.
    If you have AirPort Utility 6.2 (the latest):
    * Click on the icon for your Extreme.
    * Click on the "Edit" button in the balloon that pops up, supply the password if needed.
    * Click on the "Network" tab.
    * Give us a screen shot or transcribe the results.

  • Can i have two apple tv on the same home sharing imac

    I have apple tv in the living roon which i stream movies from imac via home sharing. Can i use another apple tv on the home sharing, use them both at the same time without any problems.

    Winston, what sort of set up do you have for 10 apple tvs? - I currently have 2 and cannot stream different movies successfully at the same time to both of them from a single macbook pro. I am looking at upgrading to a system with a macbook mini or server streaming different content to 3-5 apple tvs. Currently all streaming is on the same channel and via 2 airport extremes and a new express. Still finding the system very very slow.

  • Works but not x2 iPad2.  WiFi network is the same for printer and all Apple devices.  Help.

    We are unable to print from ipad2 using Epson Artisan 730 printer.  Software download to Macbook was successful but unable to download software to x2 iPad2.  All Apple devices are on the same WiFi.  I followed the Epson instructions but message box pops up stating Safari unable to download file.  Any suggestions.

    Welcome to Apple Discussions.
    The iPad and iPad 2 using iOS do not use the same software as your Mac using OS X.
    They are entirely different operating systems.
    Look in the iPad Apps Store for Epson iPrint app for iPad. It is free.
    The Artisan 730 is one of the printers the app supports, so this app should allow you to print from your iPad.
    If you're looking from the Mac side, open iTunes, and the iTunes Store, then the App Store, and search for Epson iPrint for iPad

  • My hus why cant I have two browsers open at the same time like i did with 3.6

    My husband and I both use facebook. I used to be able to open one browser under his name then another under mine. Since i downloaded the new ff4 I can only get on one at a time and it signs me out of the other. How do I fix this!!!!!

    You can look at one of these if you want to sign on with different identities at the same time.<br />
    Use the "Firefox 4? Try Multifox 2 Beta 1!" link.
    * Multifox: http://br.mozdev.org/multifox/

  • I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

    I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

    Is the TV set to take input from the HDMI connection?
    On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection.  Try clicking Detect Displays just to see if the computer can now sense the presence of the connection.  Check your connections.
    If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image.  Set the proper resolution (probably 720p, 1080i, or 1080p).  Set the refresh rate (probably 60Hz) if that preference is shown.  You should see a picture at this point.  I  recommend turning off mirrored displays if it is enabled.

  • Can I switch my Apple ID on the same device and purchase software with my other ID that has a different credit card (or iTunes redeemed points) and then switch back to another user ID?

    I have an iPad with an ID that is associated with 1 credit card but I don't wan't to use that credit card to make puchases.  Can I switch to a different user ID and make puchases on a different credit card and/or iTunes redeemed points and then switch back to my original ID (before the 90 days wait period us up)?

    If changing your password does not solve then contact itunes support.
    Click Support at the top of this page, then click the link under Contact Apple Support

Maybe you are looking for

  • Retrieve data from a dynamic page via loadURL

    Hello. I would like to ask you how it is possible to retrieve data from a dynamic page (asp classic in my case) using the loadURL method. I would like to create an html authentication form (with username and password fields). The loadURL method shoul

  • Itunes 10 won't recognize my iphone 3G

    i just have a basic iphone 3g and until recently itunes recognized it. i tried uninstalling itunes and re-installing with the recent itunes 10 version. when i plug my iphone into any usb port on my computer windows will recognize it and charge my pho

  • How to install system on late 2013 macbook pro retina ?

    Hmmm .... I need help. I deployed a 10.9.1 from a new MBA image to the new 15" MBPr .... not a good idea. It won't boot because of the special build that the late 2013 requires. So the original recovery HD is gone, so can't go that route. Now I need

  • Transaction SCMP - Get the name of the target system

    I am using Transaction SCMP as example to compare the contents of a table in two different systems. I would like to know how can I actually know the exact address in the second field which enables the transaction to connect to the system? Thanks and

  • Entry not found in object buffer

    Hi, When we create service desk message we are getting Entry not found in object buffer error error. Can you please help me out to resolve this issue. Thanks