Do you have trouble with Bluetooth devices on ios 5

I have to delete BT Hands free all time and repairing the devices to ear iTunes

Some details missing.
I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
Same thing all the time.
When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
I can't find Firmware Update for my radio.

Similar Messages

Do you have trouble with iPod Classic and Ford's SYNC?

Anyone have trouble with Ford SYNC recognizing iPod Classic? When I first bought my Lincoln my iPod Classic worked perfectly--just like it should with Ford SYNC. But a few months ago, when I plug in the iPod using a USB cable I get the message on Ford Sync that says, "incompatible device". At first I thought it was a ford problem so I began testing using a 2010 Buick and a 2010 Lincoln Navigator. My iPod classic doesn't work in either. However, a iPod nano works perfectly in either car. Also if I put some of my music on a flash drive it works fine in the Lincoln. So, I'm convinced that the problem is some type of update that occurred to my iPod or to iTunes.
I have tried several iPod Classics and several USB cables so it is definitely aiPod Classic software problem. By the way, my iPod Classics work fine by themselves--just not through Ford's SYNC.
I'm pretty lost as to possible solutions.
Thanks,

I have done some experimenting and testing with my old Classic iPod that uses operating system 3.1.1. I don't think this operating system has changed. However, later generation iPods such as nano, shuffle that use a different operating system seem to work absolutely perfectly in my 2010 Lincoln Navigator, especially the ones without a hard drive (i.e. flash drive). My conclusion is that the Ford SYNC updates have somehow not been backward compatible with the older operating system. I know this can be attributed to Apple for part of the problem but I suspect that Ford somehow did not do enough testing with the older iPod operating systems. Turns out there are probably 7 or more operating systems on iPods and while you would assume that "backward compatibility" is a no-brainer, that seems not to be the case with second party vendors such as Ford SYNC. Personally, I have given up trying to solve this problem and have gone to flash drive and a "line in" option. My old Classic iPod works exceptionally well, plus I have a spare so I can probably use these thing till "H freezes over". Being a older retired American these things may actually last a life time!

Trouble with Bluetooth Devices

I have a MacBook Pro 13" from late-2011. Recently I have decided to use Bluetooth headsets instead of wired earbuds because I tend to forget they are in my ears and when I get up, they are yanked out of my ears, hurting me and potentially pulling my notebook off of something. I had an LG Tone before getting my current Motorola S11-FLEX HD headset. I switched because of the problems I have been having with Bluetooth but switching has not solved the issue.
My biggest problem with my Bluetooth headsets is that the audio stutters and then de-syncs with any video. The de-sync can be as bad as a full second. I'll see the video's actions before I hear them. The de-sync also affects the responsiveness of controls. After I give a command, the audio will continue to play for however long the de-sync is before the command is performed. It's like it's making up for the lost time. The only solution I have come across is turning off the device, then turning it back on but that only works some of the time. Usually, I have to turn it off and then on again two or three times before the de-syncing issue disappears. I have no idea the cause as my LG Tone works to specifications with devices that belong to other people. I have found that moving my head in a certain direction will cause the de-sync. Sometimes, it's leaning back; other times, it's tilting my head. It's as if the Bluetooth field is planar and I'm jumping out of the plane.
Another issue is the distance I can be from my device. My Bluetooth headsets boasts being able to function perfectly as far as 30 feet for one headset but moving even 5 feet will cause the previously mentioned de-syncing if the audio is playing. If I pause the audio, I can move about 10 feet. After I move 10 feet, when I press play, the de-sync appears. It renders the function of being wireless to being useless. I wanted to Bluetooth so I didn't have to pause, take off my device, do what I need to do, and before coming back, putting on the device, and resuming play, hoping that nothing has gone wrong to cause a de-syncing issue.
A third issue I have is that sometimes, while listening to some audio of some kind, another program will make a noise causing the audio to cut out. My notebook or the web browser is not aware that audio is no longer playing. It's as if the new program has muted the original audio. The only cure: turning off the device and turning it on again and hoping it's working.
The last issue I can think of is that when I turn my notebook off for any reason, all Bluetooth devices are forgotten causing me to go through the hassle of repairing the devices again but many times, the repairing process fails and despite being on and not paired to anything else, my notebook is unable to pair unless I turn both the device off and my notebook's Bluetooth off before turning both back on.
Has anyone run into issues like this? If so, does anyone have any recommendations on how to correct the problem? The problem is on my notebook side as the devices work fine with other products. The LG Tone could be used across the house when it was attached to my father's Kindle Fire and when attached to my iPhone 5, I could walk 20 feet with doors and concrete between me and the device before any issues began (both devices had trouble with my iPhone but pausing usually fixes the issue so I don't care). Please, I need some advice and help.

Some details missing.
I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
Same thing all the time.
When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
I can't find Firmware Update for my radio.

Trouble with Bluetooth device after ios8 update. I have jawbone era HD

Bluetooth trouble since ios8 update. I have a new jawbone eraHD

make it forget the headset
put the headset in discovery / pairing mode
make sure it's not currently connected to another device like a tablet or computer
and re-add it to the phone in settings under bluetooth

Trouble with the device after iOS 5.0.1 update

After upgrding my iPod Touch 4G to iOS 5.0.1, the device seems to have slowed down a little bit. For instance when im listening to music and i unlock my iPoad it takes a long tme to unlock (5-6 secs).Even during multi-tasking i experience a serious lag, it like my iPod is dragging itself and at times the screen just goes blank. I tried restoring it, but of no use. Kindy assist

If you do a reset to factory ondition, you'll loose your data. First...
Try just a simple Reset. Does Spotlight find if you do a search for it? Also check your Restrictions settings.
Reset: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

NovaRiddle wrote:
I am having trouble pairing my iPhone4 with bluetooth device. ...
Depends on the device...
Have a look here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647

I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

I have to ask,
Are you making sure you are in park before attempting the sync? The car won't allow you to do it in motion, whether or not you're the passenger.

HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

Can you have more than one device with a different Apple ID authourized to the same computer

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Jon....
Don't confuse the threads here with 'typical' experience. Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
If you are having repeated crashes it is really pretty basic. You either have a physical problem with your pad, or you are using too much memory.
The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now. That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.
This happens, more often than not, when using safari with multiple windows open on graphic intense sites. It can also happen with a memory intensive game, and residual apps in the background.
Double tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

HT1212 I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.What should i do ? Somebod

I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

HT1212 i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled

i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled it connected to itunes for a minute and then back to disabled

Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone?

Trouble with Boot Device

I'm having some trouble with boot devices on my Neo Plat and I hoped someone here might have a fix.
I recently installed a new hard-drive as C. I've gone into Bios/Advanced Features and set the boot order to the following:
Hard Drive
CD-ROM
Floppy
When I reboot now I get the message "Booting from CD" which it can't do because there is no bootable CD-ROM present. I then get a message like "No Boot Device Present" and the system halts.
The strange thing is that if I select F11(Select Boot Device) at the BIOS test screen and select Hard Drive and then my C: Drive it boots just fine from that drive! But it will not do this automatically.
Anyone know what the problem might be?

F11 is pr. boot only .
Need to be in the bios ..
You need to go into "hd boot priority" submenu in advanced features menu and set/save the HD order there . (number three from the top)
Toggle the boot drive from pos 1. to 2. in the list and back to pos 1.
Then save the bios and exit .

Trouble with audio devices

I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
7. Java Sound Audio Engine : Software mixer and synthesizer
8. Port Microsoft LifeChat LX-3000 : Port Mixer
9. Port SoundMAX HD Audio : Port Mixer
Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audiio when a microphone is connected? If it is, how?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Spotify connection with bluetooth devices

Hi guys!
I really enjoy this app, it's just gorgeous!
I play my whole music with Bluetooth devices (Powerbeats Wireless 2 and Samsung Audio-Multiroom M7) and those doesn't work very well just with Spotify, it stops and disconnects every end of a song, it's really annoying because I have to wait for the pairing of any device. I've tried pairing them to Spotify Connect. Samsung M7 pairs but doesn't work very well and Spotify Connect doesn't recognise Powerbeats...
I hope you could help me because I wouldn't like to cancel my subscription.

Thank u so much! :D
Anyway now I have to use my tablet and take it everywhere instead of my phone...
I love music so I'd do anything just to listen to it.
Hopefully, I suppose there's an update of Spotify so I'll look forward to it.

I have problem with Bluetooth on my Qosmio G20

Hi
I have problem with Bluetooth.
I cannot use it because it is always off.
(Why Bluetooth Settings reports "Bluetooth is not Ready.")
I gone to Pro.Center in our area and he side (you delete your .. Definition of the Bluetooth!
But how!!!
whatever
How I get a new Definition of the Bluetooth?
Is that possible?
Please help me ... and learn me about all the Bluetooth things...
My pc is (TOSHIBA Qosmio G20)
I am waiting...

You should have a look at:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

Do you have trouble with Bluetooth devices on ios 5

Similar Messages

Maybe you are looking for