Docment type
What could be the Document type in T-code F-47 ( Down payment request by vendor)?
will assign full points.
Regards,
Surendra babu.
Hi Surendra,
Check with Doc type KA. Its vendor document.
Thanks,
Bapu
Similar Messages
-
Docment Type.. for cheque details
Hi experts,
I am developing a report for displaying all the cheque payment details done on last day.
in that i have to select the data for document type 'KZ/DZ' only. i am fetching the data form PAYR
but in that table documnt type is not exist. So from which table i can select doc type and what is the relation
between the respective table and PAYR.
can anyone help me. MY functional people also don't know this one.
Thanks in AdvanceHi Ajay,
I am selecting the data from table PAYR but it's not fetching data.
here is the code.. just change field value UBHKT as per ur system data.
REPORT zoutgoing_payments.
TABLES *
TABLES : bkpf,
bsak,
payr.
STRUCTURE DECLARATIONS *
TYPES : BEGIN OF ty_payr,
zbukr TYPE payr-zbukr,
hbkid TYPE payr-hbkid,
rzawe TYPE payr-rzawe,
chect TYPE payr-chect,
lifnr TYPE payr-lifnr,
kunnr TYPE payr-kunnr,
ubhkt TYPE payr-ubhkt,
vblnr TYPE payr-vblnr,
zaldt TYPE payr-zaldt,
waers TYPE payr-waers,
rwbtr TYPE payr-rwbtr,
znme1 TYPE payr-znme1,
END OF ty_payr.
DATA : it_payr TYPE TABLE OF ty_payr,
wa_payr TYPE ty_payr.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_bukrs TYPE payr-zbukr,
p_zaldt TYPE payr-zaldt.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
P_ZALDT = SY-DATUM - 1.
START-OF-SELECTION.
PERFORM FETCH_DATA.
end-of-selection.
PERFORM display_data.
*& Form FETCH_DATA
form FETCH_DATA .
SELECT zbukr
hbkid
rzawe
chect
lifnr
kunnr
ubhkt
vblnr
zaldt
waers
rwbtr
znme1 from PAYR INTO TABLE it_payr
WHERE zbukr = p_bukrs
AND zaldt = p_zaldt
AND ubhkt = '8210052' .
AND rzawe = 'C'.
endform. " FETCH_DATA
*& Form DISPLAY_DATA
form DISPLAY_DATA .
loop at it_payr into wa_payr.
write : / wa_payr-zbukr,
wa_payr-hbkid,
wa_payr-rzawe,
wa_payr-chect,
wa_payr-lifnr,
wa_payr-kunnr,
wa_payr-ubhkt,
wa_payr-vblnr,
wa_payr-zaldt,
wa_payr-waers,
wa_payr-rwbtr,
wa_payr-znme1.
endloop.
endform. " DISPLAY_DATA -
Dear Friend,
we can use one document type for multiple posting purpose
same ...
How can we find out that one document type is assingned for how many areas..???
Thanks in advance ....
BITTUHello,
Each docment type is assigned to one no range.
From number range you can find out which doucumet type is used for which area.
For e.g
Document type DR is no range 18 and used for preparing Customer Invoice
Hope it will solve your problem.
Regards
Ravi -
PO Document Types when Adopting from PRs
We are using 2 docment types for both PO's and Purchase Requisitions (NB and ZX). When using ME59N to automatically generate PO's from requisitions, the PO's get setup with the proper doc type based on the requisitions type (NB requisitions convert to an NB PO, and ZX requisitions conver to a ZX PO).
However, when adopting a requisistion in ME21N, it always uses NB for the PO, no matter what the requisition has. Is there a way to get adopting a requisition to work like ME59N and set doc type on the PO based on the requisition's doc type?
Thanks,
RickStd SAP is set defule doc type in the System is NB but if oyu want ZX Doc type in ME21N then you have to create screen variant for this doc type and assign the transaction to do that
Go To SHD0
enter ME21N in Transaction code field
and then enter e.g. ZME21N in Transaciton variant filed then hit create button
it will take you to the PO create screen.
here you enter all the value and and create the PO.
every popup screen hit enter
and which ever value you want to defulat to the transaction
those values you have to check the check box of
W.content and output only
then save. it will ask you the object where you wan to save
if you want to migrate to another system then use the real package other wise use $TMP for each screen (until the popup goes away)
and save it
Then go back to main SHD0 screen and hit goto button and select create variant transaciton and create the tcode for this variant which can be used by user -
Hi,
How can we change the docment type assignment to some of the transactions? For eg, vendor invoice, vendor payment and vendor clearing.
Thanks,
CWHi,
You can do the same in FB00, where you can make the document type ready for input.
Regards
Suresh -
Change document type NB to ZNB
Hi,
For feight charges,SD PO automatically created by system with docment type NB. During creating PO by system, we want to maintain docmument type as 'ZNB' instead of 'NB'.
Can somebody throw some light on this issue ?
With Regards,
Jaheer.hello,
it must be in the configuration where we maintain relationship between SD document tyoe (frieght charges) and PO dicument type (here NB)....
thanks. -
Budget checking document type wise
Dear sapient
I have mapped fund management as per the business scenario but i need some solution for the following point.
Can budget checking mapped as per the PR docuemnt type . i checked in derivatio rule but docment type is available as per the fi document type.
Client requirement is as below -:
if material value is below rupees 100000 client is preparing separate document type if it is more than rupees 100000 then preparing different document type
regards
sorajHI all
Extremely sory what i explained above is ok along with i want to add some more point.
Scenario 1 -:
same type of material is being purchased, but as per budget point of view they have dived in to two way
-> if material quantity/value is more than 100000 rupees than it is seperate budget.
-> If material quantity/value is less than 100000 rupees than its budget is different.
same material but budget differes as per the value.
scenario 2 -;
If material is below 10000 rupees but in this case purchase order document type is different.
with the help of ABAP i got some solution i will prepare a table and i will maintain diferent commitment item as per the purchase order type, i also checked it is working fine.
Scenario 3 -:
My clients wants budget check will be available at quation level.
regards -
SD invoice posted with document type RV ,
Hi all,
I try to do incoming payment for SD invoice posted with document type - RV. when i used to do incoming payment by transc code: f-28. An ABAP dun error occurs, stating termination " message type-X".
Is it possible to do incoming payment for SD invoice from FI. Urgent help needed.
Regards
RajHi,
Once an Invoice is created in SD, An Accounting document is generated with document type RV. RV Doc. Type shows that the customer is liable to pay the amount.
While you post the document through f-28, the document type shuld be changed to customer payment.
It may be one of the reason. So select the docment type customr payment but not RV and try
Regards -
Invoice back-end document type?
Hello,
I need to create an invoice in SRM 5.0 . We are in classic scenario. I have created the invoice but "error in process".
The customizing I have done is to link an internal number range for the BUS2205 Incoming Invoice transaction type INV Invoice. I do not have problems with VAT.
My doubts are:
Where I inform the ECC invoice document type in SRM? There is an attribute in PPOMA for that?
Do I have to put an external number range for the ECC invoice? (Because I think that for invoice we can link only one number range however for the PO we can put one internal and other external)
Could you please help me?
Thank you vey much,
Cheers,
MartaHi,
Once an Invoice is created in SD, An Accounting document is generated with document type RV. RV Doc. Type shows that the customer is liable to pay the amount.
While you post the document through f-28, the document type shuld be changed to customer payment.
It may be one of the reason. So select the docment type customr payment but not RV and try
Regards -
Order specific control over condition type
Dear Gurus...
There are two oder (sales docments)types and two condition types, out of them one condition type has to be applicable for both order types and another condition type has to be applicable only for one order type how to configure....
This is Project Manager interview question any idea please help to rescue...
Thanks in advance
sivaHi Siva,
You do like this
You define two pricing procedures
In one procedure you put both condition types(For Ex ZZZ1).
Iin second pricing pricedure you put onecondition type which is applicable to both the document types(For ex:ZZZ2).
You define two different document pricing procedures to that order types.
Document pricing procedure for Both conditions order Z1
Document pricing procedure for single condition order Z2
Assign that document pricing procedure to those sales document types.
Now you do the two pricing procedure determinations differently based on the new document pricing procedures.
Sales area+Z1-->ZZZ1
Sales area+Z2-->ZZZ2
Now you can get one condition type in both order types and another condition type only for one order type.
I hope it will clear for you,
Regards,
Murali. -
Hi all,
I have below output in alv report.
matnr 101_102 121_122 123_124
10000 23 34 45
10001 34 34 456
if i m clicking on 23 in combination of 121_122 and 10000 then i want to see detail for 121_122 and if i m clicking on 34 combination of 101_102 then i want to see detail according to it.
plz help me. its urgent.
thanks in advance.Check the below report and do compare and modify the report as per your req.
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Thanks
Seshu -
How to improve the performance of this code
Hi gurus
code is given below with LDB
this code look big but most of lines are commented
plz help its urgent
thanks in advance
*& Report ZSALES_RECON
REPORT ZSALES_RECON.
TYPE-POOLS : SLIS.
nodes: bseg , bkpf.
data : begin of zbseg occurs 0,
kunnr like bseg-kunnr,
*lifnr like bseg-lifnr,
dmbtr like bseg-dmbtr,
*shkzg like bseg-shkzg,
*gsber like bseg-gsber,
bschl like bseg-bschl,
*sgtxt like bseg-sgtxt,
total like bseg-dmbtr,
hkont like bseg-hkont,
BUDAT LIKE Bkpf-BUDAT,
belnr LIKE BSEG-belnr,
cash like bseg-dmbtr,
credit like bseg-dmbtr,
abn_voucher like bseg-dmbtr,
barista_voucher like bseg-dmbtr,
accor like bseg-dmbtr,
sodexho like bseg-dmbtr,
gift like bseg-dmbtr,
corp like bseg-dmbtr,
card like bseg-dmbtr,
miscellaneous like bseg-dmbtr,
werks like bseg-werks,
gjahr like bseg-gjahr,
SR_NO TYPE I,
shkzg like bseg-shkzg,
end of zbseg,
TP_TBL_DATA like ZBSEG.
DATA : idx TYPE sy-tabix.
Report data to be shown.
data: it_data like ZBSEG.
Heading of the report.
data: t_heading type slis_t_listheader.
AT SELECTION-SCREEN.
get bkpf.
START-OF-SELECTION.
data : sum_mis like bseg-dmbtr,
sum_abn like bseg-dmbtr,
sum_cash like bseg-dmbtr,
sum_credit like bseg-dmbtr,
sum_card like bseg-dmbtr,
sum_barista_voucher like bseg-dmbtr,
sum_accor like bseg-dmbtr,
sum_sodexho like bseg-dmbtr,
sum_gift like bseg-dmbtr,
sum_corp like bseg-dmbtr.
data : wa1_total like bseg-dmbtr.
data : wa_belnr like bseg-belnr,
wa_kunnr like bseg-kunnr,
wa_werks like bseg-werks,
belnr1 like bseg-belnr,
wa_sr_no type i.
GET BSEG.
data : wa like line of zbseg.
data : count type i,
count1 type i.
move-corresponding bseg to zbseg.
*idx = sy-tabix.
on change of zbseg-belnr.
wa_kunnr = zbseg-kunnr.
wa_kunnr = wa_kunnr+6(4).
select single werks into wa_werks from bseg where belnr = zbseg-belnr
and kunnr = '' and gjahr = zbseg-gjahr.
if wa_kunnr = wa_werks.
if zbseg-bschl <> '01'.
clear: sum_mis,wa1_total,sum_abn,sum_cash,sum_credit,sum_card,
sum_barista_voucher,sum_accor,sum_sodexho,sum_gift,sum_corp.
wa-BUDAT = BKPF-BUDAT.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
wa-belnr = zbseg-belnr.
wa_belnr = wa-belnr.
wa-shkzg = zbseg-shkzg.
wa-kunnr = zbseg-kunnr.
count = wa-sr_no.
*wa-sr_no = count + 1.
idx = idx + 1.
append wa to zbseg.
**count = wa-sr_no.
*wa-sr_no = wa-sr_no + 1.
clear wa-total.
endif.
endif.
endon.
*clear : wa1_total.
if wa_belnr = zbseg-belnr.
loop at zbseg into wa.
wa-total = wa1_total.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
count = sy-tabix.
wa-sr_no = count.
count1 = count.
*wa_sr_no = count.
modify zbseg from wa transporting sr_no.
IF wa-bschl eq '40' and wa-hkont eq '0024013020'.
if sy-tabix = 1.
wa-cash = zbseg-dmbtr.
sum_cash = sum_cash + wa-cash.
wa-cash = sum_cash.
modify zbseg index idx from wa transporting cash.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060010'.
if sy-tabix = 1.
wa-credit = zbseg-dmbtr.
sum_credit = sum_credit + wa-credit.
wa-credit = sum_credit.
modify zbseg index idx from wa transporting credit.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060015'.
if sy-tabix = 1.
wa-abn_voucher = zbseg-dmbtr.
sum_abn = sum_abn + wa-abn_voucher.
wa-abn_voucher = sum_abn.
modify zbseg index idx from wa transporting abn_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060017'.
if sy-tabix = 1.
wa-barista_voucher = zbseg-dmbtr.
sum_barista_voucher = sum_barista_voucher + wa-barista_voucher.
wa-barista_voucher = sum_barista_voucher.
modify zbseg index idx from wa transporting barista_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060020'.
if sy-tabix = 1.
wa-sodexho = zbseg-dmbtr.
sum_sodexho = sum_sodexho + wa-sodexho.
wa-sodexho = sum_sodexho.
modify zbseg index idx from wa transporting sodexho.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060030'.
if sy-tabix = 1.
wa-accor = zbseg-dmbtr.
sum_accor = sum_accor + wa-accor.
wa-accor = sum_accor.
modify zbseg index idx from wa transporting accor.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026070040'.
if sy-tabix = 1.
wa-gift = zbseg-dmbtr.
sum_gift = sum_gift + wa-gift.
wa-gift = sum_gift.
modify zbseg index idx from wa transporting gift.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060070'.
if sy-tabix = 1.
wa-card = zbseg-dmbtr.
sum_card = sum_card + wa-card.
wa-card = sum_card.
modify zbseg index idx from wa transporting card.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060018'.
if sy-tabix = 1.
wa-corp = zbseg-dmbtr.
sum_corp = sum_corp + wa-corp.
wa-corp = sum_corp.
modify zbseg index idx from wa transporting corp.
endif.
endif.
*IF wa-bschl eq '11' .
*wa-total = zbseg-dmbtr.
*modify zbseg index idx from wa transporting total.
*endif.
IF wa-bschl EQ '40' or wa-bschl = '01' .
if sy-tabix = 1.
wa-total = zbseg-dmbtr.
wa1_total = wa1_total + wa-total.
wa-total = wa1_total.
*if idx = 2.
*modify zbseg index 1 from wa transporting total.
*else.
modify zbseg index idx from wa transporting total.
*endif.
endif.
endif.
*IF zbseg-TOTAL NE zbseg-DMBTR.
IF wa-BSCHL NE '11' AND wa-BSCHL NE '40'. "AND wa-BSCHL NE '01'.
if sy-tabix = 1.
if wa-shkzg = 'S'.
wa-miscellaneous = - wa-miscellaneous.
endif.
wa-miscellaneous = ZBSEG-DMBTR.
sum_mis = sum_mis + wa-miscellaneous.
wa-miscellaneous = sum_mis.
modify zbseg index idx from wa transporting miscellaneous.
endif.
ENDIF.
*wa1-miscellaneous = wa-miscellaneous.
*modify zbseg index idx from wa.
*ENDIF.
*append wa to zbseg.
*clear:zbseg-dmbtr.
endloop.
endif.
*****endif.
*****endon.
*ENDFORM.
*append zbseg.
*endloop.
End-of-selection.
perform build_alv using zbseg t_heading.
*& Form build_alv
Builds and display the ALV Grid.
form build_alv using t_data
*tp_tbl_data
t_heading type slis_t_listheader.
ALV required data objects.
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_sort type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
Field Catalog
perform set_fieldcat2 using:
1 'SR_NO' 'SR_NO' 'BKPF' '5' space space 'SR NO' space space space
space space space space space t_fieldcat ,
2 'BELNR' 'BELNR' 'BKPF' '10' space space 'Document No' space space
space space space space space space t_fieldcat ,
3 'BUDAT' 'BUDAT' 'BKPF' '10' space space 'Document Date' space
space space space space space space space t_fieldcat ,
4 'KUNNR' space space space space space 'Site' space space
space space space space space space t_fieldcat ,
5 'TOTAL' space 'BSEG' space space space 'Total' space space space
space space space space 'X' t_fieldcat ,
6 'CASH' 'CASH' 'BSEG' space space space 'Cash Sales'
space space space space space space space 'X' t_fieldcat ,
7 'CREDIT' 'CREDIT' 'BSEG' space space space 'Credit Card'
space space space space space space space 'X' t_fieldcat ,
8 'ABN_VOUCHER' space 'BSEG' space space space 'ABN Voucher' space
space
space space space space space 'X' t_fieldcat ,
9 'BARISTA_VOUCHER' space 'BSEG' '15' space space 'BARISTA Voucher'
space space
space space space space space 'X' t_fieldcat ,
10 'CORP' 'CORP' 'BSEG' space space space 'ABN Corp' space space
space space space space space 'X' t_fieldcat ,
11 'SODEXHO' 'SODEXHO' 'BSEG' space space space 'Sodexho' space
space space space space space space 'X' t_fieldcat ,
12 'ACCOR' 'ACCOR' 'BSEG' space space space 'Accor'
space space space space space space space 'X' t_fieldcat ,
13 'GIFT' 'GIFT' 'BSEG' space space space 'Gift Coupon'
space space space space space space space 'X' t_fieldcat ,
14 'CARD' 'CARD' 'BSEG' space space space 'Diners Card' space
space space space space space space 'X' t_fieldcat ,
15 'MISCELLANEOUS' space 'BKPF' '18' space space
'Miscellaneous Income' space space space space space space space 'X'
t_fieldcat .
*14 'KBETR' 'KBETR' 'KONP' '10' space space 'Tax %age' space space
*space space space space space space t_fieldcat ,
*15 'MWSKZ1' 'MWSKZ1' 'RBKP' space space space 'Tax Type' space
*space
space space space space space space t_fieldcat ,
*16 'AMT' 'AMT' 'RBKP' space space space 'Amount Payable' space
*space
space space space space space 'X' t_fieldcat ,
*17 'WERKS' 'SITE' 'RSEG' space space space 'State' space space
*space space space space space space t_fieldcat .
*18 'GSBER' 'GSBER' 'RBKP' space space space 'Business Area' space
*space space space space space space space t_fieldcat .
Layout
x_layout-zebra = 'X'.
Top of page heading
perform set_top_page_heading using t_heading t_event.
Events
perform set_events using t_event.
GUI Status
w_status = ''.
w_repid = sy-repid.
Title
w_title = <<If you want to set a title for
the ALV, please, uncomment and edit this line>>.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = zbseg
t_data
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'SALES RECONCILIATION REPORT'(001).
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
endform.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-up = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
p_colpos: Column position.
p_fieldname: Field of internal table which is being described by
* this record of the field catalog.
p_ref_fieldname: (Optional) Table field / data element which
* describes the properties of the field.
* If this field is not given, it is copied from
* the fieldname.
p_ref_tabname: (Optional) Table which holds the field referenced
* by <<p_ref_fieldname>>.
If this is not given, the parameter
<<p_ref_fieldname>> references a data element.
p_outputlen: (Optional) Column width.
p_noout: (Optional) If set to 'X', states that the field is not
* showed initially. If so, the field has to be
included in the report at runtime using the display
options.
p_seltext_m: (Optional) Medium label to be used as column header.
p_seltext_l: (Optional) Long label to be used as column header.
p_seltext_s: (Optional) Small label to be used as column header.
p_reptext_ddic: (Optional) Extra small (heading) label to be
* used as column header.
p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
or REPTEXT_DDIC as text for column header.
p_hotspot: (Optional) If set to 'X', this field will be used
* as a hotspot area for cursor, alolowing the user
* to click on the field.
p_showasicon: (Optional) If set to 'X', this field will be shown
as an icon and the contents of the field will set
* which icon to show.
p_checkbox: (Optional) If set to 'X', this field will be shown
as a checkbox.
p_edit: (Optional) If set to 'X', this field will be editable.
p_dosum: (Optional) If set to 'X', this field will be summed
(aggregation function) according to the grouping set
by the order functions.
t_fieldcat: Table which contains the whole fieldcat.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given
is a data element.
If p_ref_tabname is given, the ref_fieldname given is a
field of a table.
In case ref_fieldname is not given,
it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = <<If you want to set a logo, please,
uncomment and edit this line>>
it_list_commentary = t_heading.
endform. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_selfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
endform. "user_command
*********************************ldb code start from here *************************************************************
DATABASE PROGRAM OF LOGICAL DATABASE ZBRM_3
top-include and nxxx-include are generated automatically
Do NOT change their names manually!!!
*include DBZBRM_3TOP . " header
*include DBZBRM_3NXXX . " all system routines
include DBZBRM_3F001 . " user defined include
PROGRAM SAPDBZBRM_3 DEFINING DATABASE ZBRM_3.
TABLES:
BKPF,
BSEG.
Hilfsfelder
DATA:
BR_SBUKRS LIKE BKPF-BUKRS,
BR_SBELNR LIKE BKPF-BELNR,
BR_SGJAHR LIKE BKPF-GJAHR,
BR_SBUDAT LIKE BKPF-BUDAT,
BR_SGSBER LIKE BSEG-GSBER.
BR_SBUZEI LIKE BSEG-BUZEI,
BR_SEBELN LIKE BSEG-EBELN,
BR_SEBELP LIKE BSEG-EBELP,
BR_SZEKKN LIKE BSEG-ZEKKN.
working areas for the authority check "n435991
for the company code "n435991
*TYPES : BEGIN OF STYPE_BUKRS, "n435991
BUKRS LIKE T001-BUKRS, "n435991
WAERS LIKE T001-WAERS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BUKRS. "n435991
"n435991
*DATA : G_S_BUKRS TYPE STYPE_BUKRS, "n435991
G_T_BUKRS TYPE STYPE_BUKRS OCCURS 0. "n435991
"n435991
for the document type "n435991
*TYPES : BEGIN OF STYPE_BLART, "n435991
BLART LIKE BKPF-BLART, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BLART. "n435991
"n435991
*DATA : G_S_BLART TYPE STYPE_BLART, "n435991
G_T_BLART TYPE STYPE_BLART OCCURS 0. "n435991
"n435991
for the business area "n435991
*TYPES : BEGIN OF STYPE_GSBER, "n435991
GSBER LIKE BSEG-GSBER, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_GSBER. "n435991
"n435991
*DATA : G_S_GSBER TYPE STYPE_GSBER, "n435991
G_T_GSBER TYPE STYPE_GSBER OCCURS 0. "n435991
"n435991
for the purchasing organization "n435991
*TYPES : BEGIN OF STYPE_EKORG, "n435991
EKORG LIKE EKKO-EKORG, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_EKORG. "n435991
"n435991
*DATA : G_S_EKORG TYPE STYPE_EKORG, "n435991
G_T_EKORG TYPE STYPE_EKORG OCCURS 0. "n435991
"n435991
for the plant "n435991
*TYPES : BEGIN OF STYPE_WERKS, "n435991
WERKS LIKE EKPO-WERKS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_WERKS. "n435991
"n435991
*DATA : G_S_WERKS TYPE STYPE_WERKS, "n435991
G_T_WERKS TYPE STYPE_WERKS OCCURS 0. "n435991
"n435991
*DATA : G_F_TABIX LIKE SY-TABIX. "n435991
"n435991
working tables for array database access "n934526
*types : begin of stype_key, "n934526
bukrs type bkpf-bukrs, "n934526
belnr type bkpf-belnr, "n934526
gjahr type bkpf-gjahr, "n934526
end of stype_key, "n934526
"n934526
stab_key type standard table of "n934526
stype_key "n934526
with default key. "n934526
Initialwerte setzen
FORM INIT.
ENDFORM.
Selection Screen: Process before output
FORM PBO.
ENDFORM.
Selection Screen: Process after input
FORM PAI USING FNAME MARK.
CHECK MARK = SPACE.
ENDFORM.
Lesen BKPF und Uebergabe an den Selektionsreport
FORM PUT_BKPF.
define locla working areas "n934526
data : l_t_key type stab_key, "n934526
l_t_key_block type stab_key, "n934526
l_t_bkpf type standard table of bkpf. "n934526
"n934526
----------------------------------------------------------"n934526
"n934526
database seletion improved "n934526
at first read all FI doc keys into a lean table "n934526
data: wa like bkpf-belnr.
SELECT * FROM BKPF
where budat in br_budat
AND GJAHR EQ BR_GJAHR-LOW
AND BLART = 'RV'.
AND BLART IN BR_BLAR "n934526
"n934526
check sy-subrc is initial. "n934526
"n934526
then process the found FI doc keys in small blocks "n934526
do. "n934526
if l_t_key[] is initial. "n934526
exit. " no more keys -> leave this DO loop "n934526
endif. "n934526
"n934526
form small blocks with 100 FI docs each "n934526
refresh l_t_key_block. "n934526
append lines of l_t_key from 1 to 100 "n934526
to l_t_key_block. "n934526
delete l_t_key from 1 to 100. "n934526
"n934526
read the complete FI doc headers for the block "n934526
SELECT * FROM BKPF "n934526
into corresponding fields of table l_t_bkpf "n934526
for all entries in l_t_key_block "n934526
WHERE BUKRS = l_t_key_block-BUKRS "n934526
AND BELNR = l_t_key_block-BELNR "n934526
AND GJAHR = l_t_key_block-GJAHR. "n934526
"n934526
provide the complete structure for the PUT "n934526
loop at l_t_bkpf into bkpf. "n934526
process this company code : authority and read T001 "n934526
PERFORM F1000_COMPANY_CODE. "n934526
"n934526
go on if the first authority check was successful "n934526
CHECK : G_S_BUKRS-RETCODE IS INITIAL. "n934526
"n934526
set the currency key and save the keys "n934526
MOVE : G_S_BUKRS-WAERS TO T001-WAERS, "n934526
BKPF-BUKRS TO BR_SBUKRS, "n934526
MOVE BKPF-BELNR TO BR_SBELNR.
MOVE BKPF-GJAHR TO BR_SGJAHR . "n934526
BKPF-GJAHR TO BR_SGJAHR. "n934526
PUT BKPF. "n934526
endloop. "n934526
enddo. "n934526
ENDSELECT.
ENDFORM.
Lesen BSEG und Uebergabe an den Selektionsreport
FORM PUT_BSEG.
define local working areas "n934526
data : l_t_bseg type standard table of bseg. "n934526
"n934526
----------------------------------------------------------"n934526
BR_SGSBER = BR_GSBER-LOW.
"n934526
SELECT * FROM BSEG "n934526
WHERE BELNR EQ BR_SBELNR
AND GJAHR EQ BR_SGJAHR
AND GSBER EQ BR_SGSBER.
check sy-subrc is initial. "n934526
"n934526
loop at l_t_bseg into bseg. "n934526
MOVE BSEG-BUZEI TO BR_SBUZEI.
MOVE BSEG-EBELN TO BR_SEBELN.
MOVE BSEG-EBELP TO BR_SEBELP.
MOVE BSEG-ZEKKN TO BR_SZEKKN.
PUT BSEG.
endSELECT. "n934526
ENDFORM.
"n435991
FORM AUTHORITYCHECK_BKPF "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BKPF. "n435991
"n435991
the authority-check for the company code was successful; "n435991
check authority for the document type here "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_BLART INTO G_S_BLART "n435991
WITH KEY BLART = BKPF-BLART BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "document type is known "n435991
"n435991
WHEN 4. "docment type is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
INSERT G_S_BLART INTO G_T_BLART "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "document type is new --> append "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
APPEND G_S_BLART TO G_T_BLART. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_BLART-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bkpf "n435991
"n435991
"n435991
FORM AUTHORITYCHECK_BSEG "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BSEG. "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_GSBER INTO G_S_GSBER "n435991
WITH KEY GSBER = BSEG-GSBER BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "business area is known "n435991
"n435991
WHEN 4. "business area is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
INSERT G_S_GSBER INTO G_T_GSBER "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "business area is new --> append "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
APPEND G_S_GSBER TO G_T_GSBER. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_GSBER-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bseg "n435991
"n435991ABAP provides few tools to analyse the perfomance of the objects, which was developed by us.
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
by using this tool we can analyse the perfomance issues related to DATABASE calls.
Perfomance Techniques for improve the perfomance of the object.
1) ABAP/4 programs can take a very long time to execute, and can make other processes have to wait before executing. Here are some tips to speed up your programs and reduce the load your programs put on the system:
2) Use the GET RUN TIME command to help evaluate performance. It's hard to know whether that optimization technique REALLY helps unless you test it out.
3) Using this tool can help you know what is effective, under what kinds of conditions. The GET RUN TIME has problems under multiple CPUs, so you should use it to test small pieces of your program, rather than the whole program.
4) Generally, try to reduce I/O first, then memory, then CPU activity. I/O operations that read/write to hard disk are always the most expensive operations. Memory, if not controlled, may have to be written to swap space on the hard disk, which therefore increases your I/O read/writes to disk. CPU activity can be reduced by careful program design, and by using commands such as SUM (SQL) and COLLECT (ABAP/4).
5) Avoid 'SELECT *', especially in tables that have a lot of fields. Use SELECT A B C INTO instead, so that fields are only read if they are used. This can make a very big difference.
6) Field-groups can be useful for multi-level sorting and displaying. However, they write their data to the system's paging space, rather than to memory (internal tables use memory). For this reason, field-groups are only appropriate for processing large lists (e.g. over 50,000 records). If you have large lists, you should work with the systems administrator to decide the maximum amount of RAM your program should use, and from that, calculate how much space your lists will use. Then you can decide whether to write the data to memory or swap space.
Use as many table keys as possible in the WHERE part of your select statements.
7)Whenever possible, design the program to access a relatively constant number of records (for instance, if you only access the transactions for one month, then there probably will be a reasonable range, like 1200-1800, for the number of transactions inputted within that month). Then use a SELECT A B C INTO TABLE ITAB statement.
8) Get a good idea of how many records you will be accessing. Log into your productive system, and use SE80 -> Dictionary Objects (press Edit), enter the table name you want to see, and press Display. Go To Utilities -> Table Contents to query the table contents and see the number of records. This is extremely useful in optimizing a program's memory allocation.
9) Try to make the user interface such that the program gradually unfolds more information to the user, rather than giving a huge list of information all at once to the user.
10) Declare your internal tables using OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to be accessing. If the number of records exceeds NUM_RECS, the data will be kept in swap space (not memory).
11) Use SELECT A B C INTO TABLE ITAB whenever possible. This will read all of the records into the itab in one operation, rather than repeated operations that result from a SELECT A B C INTO ITAB... ENDSELECT statement. Make sure that ITAB is declared with OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to access.
12) If the number of records you are reading is constantly growing, you may be able to break it into chunks of relatively constant size. For instance, if you have to read all records from 1991 to present, you can break it into quarters, and read all records one quarter at a time. This will reduce I/O operations. Test extensively with GET RUN TIME when using this method.
13) Know how to use the 'collect' command. It can be very efficient.
14) Use the SELECT SINGLE command whenever possible.
15) Many tables contain totals fields (such as monthly expense totals). Use these avoid wasting resources by calculating a total that has already been calculated and stored.
Some tips:
1) Use joins where possible as redundant data is not fetched.
2) Use select single where ever possible.
3) Calling methods of a global class is faster than calling function modules.
4) Use constants instead of literals
5) Use WHILE instead of a DO-EXIT-ENDDO.
6) Unnecessary MOVEs should be avoided by using the explicit work area operations
see the follwing links for a brief insifght into performance tuning,
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_Introduction.asp
1. Debuggerhttp://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
2. Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
3. SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
4. CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
5. Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
6. Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
7. Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
8. Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
9. ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm -
How to capture the value in AVL intracrivity report
Hi ,
i have one doubt please clarify me.
in ALV interactivity report if user click on the one field, how captured the that field value in one variable. presentably i am using
ws_field_catalog-col_pos = '2'.
ws_field_catalog-fieldname = 'BELNR'.
ws_field_catalog-tabname = 'I_OUTPUT'.
ws_field_catalog-scrtext_l = 'Original Document number.'.
ws_field_catalog-hotspot = 'V'.
ws_field_catalog-scrtext_m = 'Original Doc.no.'.
ws_field_catalog-scrtext_s = 'Original Doc.no.'.
APPEND ws_field_catalog TO lt_fieldcat.
CLEAR: ws_field_catalog.
but it is not capture the valu it is capture the only field name please any one can you suggest me.
Thanks,
Hari.hi,
there is one type pool availabe for the. SLIS_SELFIELD.
make ur own structure and use case sy-ucomm.
when '&IC1'.
write ur code here.
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
REWARD ME IF HELPFUL. PLEASE -
Hi experts,
Can anyone brief me about events which appears in an ALV report.
I want the events only for Alv report not for any report program.
Thanks
Sanket sethi.Hi Sanket,
<b>ALV is Application List viewer.</b>
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
<b>1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT</b>
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
Sample ALV1:
REPORT Z_ALV_SIMPLE_EXAMPLE_WITH_ITAB .
*Simple example to use ALV and to define the ALV data in an internal
*table
Martin Schlegel, BearingPoint, December 2004
Thanks to Madhusudhan Sonee and Rama Krishna Kommineni for testing
and feedback
*For a very long time, people gave me the feeling that ALV is a
*complicated tool that is difficult to understand and to use.
*Lately I had to use it and I discovered that ALV is easy to use and
*saves a lot of work:
*ALV will generate the column headings on its own, so one does not need
*to work on headlines and transalation.
*ALV allows the user to select the columns he wants to see, so the user
*does not need to contact a developer for every change he likes to have.
*ALV allows the user to create his own sums, so
*ALV has a simple way to work with internal tables.
*If you really want to save time, use ALV instead of write!
*Please take 30 minutes to explore the following example and see how
*easy it is to use ALV!
*data definition
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
" intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
"make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
Check if material was found
clear i_lines.
describe table imat lines i_lines.
if i_lines lt 1.
Using hardcoded write here for easy upload
write: /
'No materials found.'.
exit.
endif.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = i_repid
I_INTERNAL_TABNAME = 'IMAT' "capital letters!
I_INCLNAME = i_repid
CHANGING
CT_FIELDCAT = int_fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
*explanations:
I_PROGRAM_NAME is the program which calls this function
I_INTERNAL_TABNAME is the name of the internal table which you want
to display in ALV
I_INCLNAME is the ABAP-source where the internal table is defined
(DATA....)
CT_FIELDCAT contains the Fieldcatalouge that we need later for
ALV display
IF SY-SUBRC <> 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
*This was the fieldcatlogue
And now, we are ready to display our list
Call for ALV list display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Z_ALV_SIMPLE_EXAMPLE_WITH_ITAB'
I_CALLBACK_PROGRAM = i_repid
IT_FIELDCAT = int_fcat
I_SAVE = 'A'
TABLES
T_OUTTAB = imat
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
*explanations:
I_CALLBACK_PROGRAM is the program which calls this function
IT_FIELDCAT (just made by REUSE_ALV_FIELDCATALOG_MERGE) contains
now the data definition needed for display
I_SAVE allows the user to save his own layouts
T_OUTTAB contains the data to be displayed in ALV
IF SY-SUBRC <> 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.
Samle ALV2:
*& Report ZZ_22038_22098_002 *
*& This is an Interactive ALV report, where on line slection we can see
*& the secondry list
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
<b>Reward Points if Useful</b>
Regards
Gokul -
im displaying button in ALV using these statements.
form set_pf_status using rt_extab type slis_t_extab.
SET PF-STATUS 'STANDARD' excluding rt_extab.
endform. "set_pf_status
When that button is clicked shuld display a secondary list.
i tried to get this using this code. But its not navigating to the seco list.
FORM USER_COMMAND USING w_ucomm LIKE sy-ucomm
wa_selfield TYPE slis_selfield.
CASE w_ucomm.
WHEN 'UI'.
write:'sfdjhsfh'.
ENDCASE.
ENDFORM. " user_command
wat i need to do ,to display the secondary list when cliks the button in alv.Anu,
See teh below simple code...
An Interactive ALV Report
*& Report ZZ_22038_22098_002 *
*& This is an Interactive ALV report, where on line slection we can see
*& the secondry list
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Don't forget to reward if useful....
Maybe you are looking for
-
My mac gets slow when I play music from my iTunes library
Hi, aproximately six months ago I noticed that everytime I play music from my iTunes library that its stored in my 27" iMac's hard drive, the computer gets slow, the images start to flicker, the animatios on the dock and the one when u minimize or ma
-
Hi all. How to Set <b>Print-Settings @ SAP</b>. if any tranaction available. for eg. if i want to set my print-settings like locl, mll @ SAP. how to set.
-
RV220W - Content filtering not working (?)
Hello, I bought a router model RV200W fw 1.0.1.0... nice toy. It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is no
-
Segments, extents and data blocks
I'm somewhat green when it comes to Oracle and databases in general, so bare with me. I bought the OCP Exam Guide to try and learn as much as I can. I'm at the chapter about segments, extents and data blocks and I'm having a bit of trouble grasping t
-
I could not restore my i phone it is in recovery mode
i could not restore my i phone it is in recovery mode