Doctype and Port 80 problems

Hi
Have a site up and running through Contribute and hoped
someone can help with a couple of problems:
The index page is adding :80/ to the end of the URL instead
of just / Does anyone know how to get rid of this?
Also, what is the best doctype to use with contribute?
Appears that no doctype is added and really need to do that before
tackling the other code/validation errors. Tried a couple of
options but these made the situation worse.
Thanks in advance for any assistance.
Tom

Hi
I would like to say that not getting a reply in the forum was
a little disappointing. In no way do I blame forum members, that's
up to them but don't Adobe people keep an eye on questions that are
unanswered. Looking at how many others there are, maybe not.
Neither did they reply to the email I sent to support.
In the end, I found a free website help line in the area
where I'm staying. They are
Surrey Web
Development and deserve a mention, as they helped for nothing,
within a couple of hours. Anyway, the port 80 thing I'm still not
sure about, as they spoke to my hosts and this is sorted out but
I'm not sure how. On the doctype, they recommended HTML 4.01
Transitional, I'll paste the code below if that helps anyone, which
goes right at the top of your page (in the source code, not the
page itself).
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
(Then there's another line, just search for that, went weird
on here.)
They also suggested a few other things and explained how to
use a validator. Can't say the website code is absolutely perfect
yet but nearly. Can't really understand why this isn't added
anyway, I love contribute and people say my website looks good,
important for a photographer. Just hope Adobe will work on the
coding problems, I don't want to feel I have to use something else.

Similar Messages

WRT54G - IP and Port mapping problems

I'll set the scenario first so you can understand what i'm trying to do. I have a D-Link 524 configured trough PPoE to get access to internet. It has DHCP enabled (from 192.168.0.100 to .199). I had static ip configured in the D-Link router as 192.168.0.90 and some ports forwarded to my pc that's like 50 meters away from the router, in other office. The thing is, I added a WRT54G v6 router cause the wireless signal from the d-link didn't reach where I am, and some people needed to use it. So, I plugged my pc to the WRT54G, and the linksys to the D-Link. No, my problem is, I no longer have the static ip that the d-link assigned me (the linksys uses the 192.168.1.X range, and the d-link the 192.168.0.X range). Now, if I release my MAC address from the D-link and assing a static ip in the WRT54G, I could fordward the ports I had before in the d-link but in the linksys. The thing is, I can't find a way to assing a static ip in the linksys. And I tried to change the range of ip from the linksys to 192.168.0.X so I can still use the assigned address from the d-link but it didn't work, I couldn't access the linksys neither the d-link after changing the address, didn't get internet either, so i had to reset the linksys. After all of this... what the hell do I do Azureus can't connect, or any other P2P app for that matter (cause I had the ports forwarded in the other router, and I can't forward them in the linksys cause I get a dynamic local ip, if I forward them to, say 192.168.1.100 and some day I get assigned 192.168.1.101... well, I assume it won't work as expected)

The WRT54G does not assign fixed IP addresses through DHCP. You have to set a static IP address on the computer itself instead of using DHCP.
I would, however, recommend not to use the WRT as router but only as simple access point. Instructions are here. Set a LAN IP address like 192.168.0.2 on the WRT to keep it accessible inside your normal LAN. I think this setup will solve all your problems. You can still use the fixed IP address assignment from the DHCP server on the D-Link and you only have to configure a single port forwarding on the D-Link (instead of two which would be necessary if you connect the Linksys router through its internet port to the D-Link).
With two access points you can create a roaming network by using the identical wireless settings on both routers (SSID, wireless security, wireless mode). Channels should be different and at least 5 apart. SSID broadcast should be enabled on both. Now most wireless clients are able to move between both access points without loosing the connection.
Message Edited by gv on 06-01-2008 02:22 PM

Xbox 360/one problem and port forwarding

For a couple months now (since I got my AirPort Extreme) I have not been able to connect to a certain friend on xbox. I can connect to anybody else however. The only way we can (kind of) connect is if somebody else is host and we both connect to him.
My NAT type is Moderate. When I try to test my connection on my xbox it says that I can connect but I am limited in matchmaking (this is joining games and using voice chat, which is the problem named above for my particular friend). The xbox shows the error and suggests that I enable UPnP or open the port 3074.
The problem is that I have already have! I gave my xbox a static IP and forwarded the port 3074 to that IP.
(I have also tried forwarding all the ports that xbox live uses to the xbox. These being:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
as found on the xbox website... https://support.xbox.com/en-US/xbox-360/networking/network-ports-used-xbox-live
I made sure to put them in the right text boxes for UDP and TCP so that is not the problem either.)
I know that the AirPort Extreme does not support UPnP but does have a similar thing called NAT Port Mapping Protocol which was already enabled. (I tried all possibilities of enabling/disabling NAT...Protocol and port forwarding/not port forwarding.) --- This is not the solution as I see it
In short: My xbox tells me to open port 3074. I already have. It still tells me to open it and still won't work.
I posted this on the apple discussion page (instead of the xbox discussion page) because I know that it's not an xbox problem. When I had my old linksys router it worked perfectly.

I have this exact same question and problem. I know this doesn't help, but would appreciate any updated information if you find an answer. I'll keep working on this also and let you know if I find an anwer.

Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING

hello colleagues,
In the phase Connect Diagnostics dont show the Agent available in SLD, but when go to SLD i have the agents,
Error,
Connect Diagnostics Agent
The table does not contain any data
Agent availables in all SLD
SOAP:1.007 SRT: Unupported xstream found: ("HTTP Code 401 : Unauthorized")
Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING
Thanks

OK, then pls follow below steps;
- Go to step 'Create Users' in solman_setup System Preparation scenario and make sure the user SM_INTERN_WS has a green status. Use the 'Test Login' button to make sure the user is not locked and has correct credentials maintained in solman_setup
- Immediately after checking the user status, navigate to Configure Connectivity->Enable Web Services and execute again the 'Create Logical Ports' automatic activity, in order to propagate the correct credentials to the Logical Port definitions.
- If the above operation is not successful, repeat the two steps above, providing a different user Id in 'Create Users' step, eg SM_INTERN_W1. This will prevent situations where the user gets locked by Logical Ports using an obsolete password.
Let me know the results.
Regards,
Vivek

BPM Worklist Problem After Setting Frontend Host and Port

Hi all,
I was following the EDG for SOA 11.1.1.5 and was encountering a problem with the BPM Worklist after setting the Frontend Host and Port. We have a topology that includes a load balancer that terminates SSL, two OHS instances, and two SOA instances on separate VMs. When BPM Worklist was loading, it was calling webservices internally through the load balancer, but WebLogic was expecting them as http://. It was not able to resolve the HTTPS port that was being sent from the load balancer through the 80 to 443 redirect.
What the current EDG does not tell you, is that you have to also turn on "Enable Weblogic Plug-In" for WebLogic to use the OHS plug-in. I did it at the domain level, as all traffic will go through the load balancer. This essentially tells WebLogic that all URLs are https://
Here is an exerpt from the SOA.out log file:
<Sep 8, 2011 9:32:06 PM PDT> <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
Caused By: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
What it is also missing, is that you should also set the SOA Infrastructure ServerURL mbean for the load balancer, to match the frontend host and port. Do this through Fusion Middleware Contol. Otherwise, you could encounter URL mismatches.
I hope this helps someone else.
I've asked Oracle to add this to the EDG for SOA. It's in the IDM guide, but not in any other EDGs.

Thanks Josh. It helped me infact in 11.1.1.4 Enable Weblogic Plug-In is not required. But 11.1.1.5 I thing it is mandatory. Oracle should have a clear documentaion.

Port-channel Problem between Fabric Interconnect and N7K vPC

Dear all,
I have a problem with Port-channel Uplink between Fabric Interconnect with N7K using vPC
This is my network topology for UCS Deployment
In N7K I has configured vPC for red link and green link, at Fabric Interconnect A I has configured Port-Channel with member is Port 1 and Port 2, uplink is red link. At Fabric Interconnect B, I has configured Port-Channel with member is Port 1 and Port 2, uplink is green link.
The show interface port-channel on N7K is good, every port-channel is up and have all member. But At Fabric Interconnnect, when I see on UCS Manager, the status of Port-Channel on Fabic A and Fabric B is fault with Additional Info: No operational member. Although all link is link up and I has status of Port-Channel is enable on UCS Manager. When I see the Properties of Port 1, Port 2 on Port-channel, I see the membership status is : individual. This mean port-channel is not up and no membership in this configuration. I want to using port-channel for load balance and plus more bandwidth for uplink to 20Gig. I don't understand why ?
Please help me resolve this problem, I has send the capture screen of UCS Manager when I show status of Port-channel and Port-member in port-channel in attach items.
Anyone can help me to resolve this, thanks you very much. Please reference attach items for more detail about fault.
Thanks,
Trung.

Thanks Matthew very much,
I has resolved this problem. The reason of problem is miss match protocol of port-channel between N7K and Fabric Interconnect. The Fabric Interconnect always use LACP protocol, but N7K using Port-channel mode on, that why the port-channel failed. I has configured LACP for port-channel in N7K, it has resolved the problems.
Thanks,
Trung.

RV180W - problems on rules and port redirections

Hello,
I installed a RV180W router a month ago.
Our production server has to retreive informations on a remote server so I set up the rules and port redirections accordingly on the firewall.
I noticed that some times the rules didn't work anymore and I had to reboot the RV to fix it.
The rules are still active on the router's admin panel as well as the services and the port redirection. The last firmware is installed.
Does anyone experienced the same problem and found a fix?
Thanks in advance,
Best regards

I hate to say it, but there are issues like this with the rv series. Have you replace the router with another one? That's the first thing I would try since you can probably exchange it easily right now.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

Computer AND iTunes don't recognize my iPod touch. Comp thinks it is a camera. iTunes won't bring up devices at all. I've already uninstalled iTunes and QT and reinstalled after problem that happened when I updated iTunes... getting beyond P/Oed!!!

Computer AND iTunes don't recognize my iPod touch. Comp thinks it is a camera or something. iTunes won't bring up devices at all. I've already uninstalled iTunes and QT and reinstalled after problem that happened when I updated iTunes - updated iTunes completely demolished my computer's ability to recognize the sound card and computer had NO sound at all. I had to uninstall iTunes, QT, AND my sound card and reinstall them all. Sound worked fine, but now I can't sync my iPod. Computer recognizes that "something" is hooked up (thinks it might possibly be a camera) and I get that "open with" window. In "my computer" it shows that there is an "iPod" connected, but it is pictured as a camera. In iTunes my username is no longer appearing (although account info is there) and NO devices whatsoever get listed. There is nothing wrong with my USB ports or cable. And of course Apple won't help anyone unless you pay them to. ... I am getting beyond P/Oed!!! You pay hundreds for a product and all you get are headaches with their stupid bug infested software and no support at all.
Can anyone out there help me clean up this unbelievable mess Apple and iTunes has created in my computer?
Thank you.
Evie

After three completely wasted days trying to figure all of this out I finally got it fixed - on my own - by reading dozens and dozens of rogue posts in indie forums from people that refuse to dish out money to have a company TRY and advise possible fixes on their own glitches.
(here's a novel idea - fix the glitches Apple. Or - don't send out updates filled with bugs in the first place)
Everything (several applications) had to be uninstalled in a very specific order and then restarted , then it all had to be verified with manual deletions of leftovers, and emptying the recycle bin, then another restart, then iT had to be reinstalled again and the system restarted again, and two more update downloads. Holy!!!
I love my little iPod touch, but I honestly must say, when this kind of thing happens (and it has several times now when I try to deal with iTunes or Apple), it makes me want to flush it down the toilet.

FF keeps defaulting to the wrong HTTP proxy server and port. I have to change it every time I attempt to open Firefox? How do I change it for good?

The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to remove old USB printer drivers and ports from Windows XP and Windows 7

We have several instances of HP 4250 Printers connected as local USB printers. When trying to replace this model with a HP P4015n or HP 600 M602n the new models will appear to install but won't print. No error messages but sometimes they try to install with ieee 1284.4 support which would seem to be a parallel port type. We're trying to use the HP UPD PCL 5. I'm looking for a way to completely remove the old printer instances, drivers and ports. While the printer icons and drivers seem to be able to be deleted the USB printer ports can't be deleted. Then when I go back and try to install the new model printer it can only use he existing USB port. Again, when that happens the new printer won't print. So I'm trying to get a completely fresh start with the XP SP 3 and Win 7 OS before installing the newer models. I've tried several methods to clean the USB printers but the instructions are never detailed and most times something is missing and the OS needs to be reloaded. I thought that I would see if someone who knows HP USB printers has any ideas...

These seem to be a commercial products. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Essbase1113 IP Address and Port Questions

hello,
everyone, i'm puzzled on a question about essbase.
it'll be so kind if you give me some suggestions.
in our project, we install EMP System 1113 on Win Server2003, but it's in local network. there is no problem when we connect it using client tools in local network environment.
however, we wanna connect the Essbase Server through Internet, we map the server address (such as 10.163.163.163) as an Internet address (such as 111.111.111.111).
we didn't use VPN such tools, and, the address is just a mapping, if we don't map the port, we couldn't connect the essbase server.
here comes the question, how do we map the essbase address and port ? i mean which port should we use, so that we could connect it through Internet ?
thank you so much.
wish to reply.
hawk.

The ports that essbase use are outlined at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch06s05s01.html
Cheers
John
http://john-goodwin.blogspot.com/

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Replacing Host Name and Port number throughout Environments

So I am currently working on a project that have several classes using simple JDBC code. I'm switching all of it to use JNDI instead of what is currently being used. I'm using Weblogic and the plan is to have the code run in a cluster.
Here is a code Snippet of some of the code.
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://hostname:port");
My problem lies in the the "t3://hostname:port" String. I don't want to hardcode that since I know its bad code practice but my question is what is the best way to replace that with the Host Name and Port number as I move environments. Should I have a Class with a Static Variable and just reference that through the other classes or should I put it in some Property file and read the value from there? Any insight into this would be greatly appreciated.
Thank you.

would it be something like this?
Properties properties = new Properties();
          try {
     properties.load(new FileInputStream("src/jndi.properties"));
     String url = properties.getProperty("url");
     System.out.println(url );
     } catch (IOException e) {
     }

Doctype and Port 80 problems

Similar Messages

Maybe you are looking for