Docu for 7.5 ::: installation and upgrade

Hi,
where can I find documentation for an upgrade from 7.0 to 7.5? ... and also for a new installation.
Regards.
Thx.

Hi Ganimede,
You can refer to upgrade, install, configuration and likes for any of the versions of BPC in SAP Service Market place. (use your S id for the same).
Regards,
Poonam

Similar Messages

Is adobe reader, acrobat requires system reboot for installation and upgradation

is adobe reader, acrobat requires system reboot for installation and upgradation?

Hi Rave,
Thanks for your reply.
we have a vulnerabilities scan on adobe systems. it shows as below .
Plugin Name
Remarks
Family
current version
Adobe Reader Unsupported Version Detection
Upgrade to latest version(http://www.adobe.com/support/programs/policies/supported.html)
Windows
Adobe Reader 9.5.5 9.5.5
please tell me how to fix it.
thanks in advance .
Regards,
Harish

BO XI 3.1 installation and Upgrade activity Steps

Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
         j2re1.4.2_04
         j2re1.4.2_16
         jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
Sridharan

Hi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb.

OEM 10.2.0.1 installation and upgrade to 10.2.0.3

Dear all,
I want to install the latest version of OEM 10.2.0.3 on Linux RedHat 4. However, after downloading the OEM 10.2.0.3 and reading the release note, I realized that the download is just the 10.2.0.3 upgrade patchset. I have to do a fresh base installation of OEM 10.2.0.1 first. Is this correct?
After installing OEM 10.2.0.1 with an existing 10.2.0.1 database, I need to upgrade OEM 10.2.0.1 to OEM 10.2.0.3 using the patchset I downloaded. Because both OMS and AGENT will be upgraded, I am not sure what installation destination I shoud supply? OMS_HOME, or AGENT_HOME, or just a new home for upgrade? What are the required steps to upgrade OEM 10.2.0.1 to OEM 10.2.0.3?
Are there any documentation or articles that I can follow to do the upgrade?
Thanks a lot in advanced.
Xiaoping

There is a README.txt file in the 10.2.0.3 patchset zip file that has the instructions for upgrading 10.2.0.1 OEM to 10.2.0.3.
You download 10.2.0.1 separately which delivers a 10.1.0.4 database. Apply the one-off database patch to the db10g 10.1.0.4 Oracle Home via opatch, then use runInstaller to upgrade to 10.2.0.3 via 3731593. You can optionally create a db10gr2 10.2.0.1 Oracle Home, apply the 10.2.0.3 patchset then run dbua to upgrade the 10.1.0.4 repository database to 10.2.0.3.
You probably would have had fast response posting to the Enterprise Manager Grid Control forum:
Enterprise Manager
2. Fresh Installation of Enterprise Manger 10g Grid Control Release 2 and upgrading it to Release 3
In order to install Enterprise Manager 10g Grid Control Release 3, you must install either 10.2.0.1.0 or 10.2.0.2.0 Grid Control environment. This section describes steps to install Enterprise Manager 10g Grid Control Release 3 environment starting with 10.2.0.1.0 (10.2.0.2.0 for Windows) install
2.1 Install Oracle Enterprise Manager 10g Release 2
Installing 10g Grid Control Release 3 requires any previous releases of Grid Control, that is any 10.2.x.x.x installation, and upgrade to 10.2.0.3.0 release. If you do not have a previous release, but want to have a 10.2.0.3.0 Grid Control environment, then first install 10.2.0.1.0 Grid Control (10.2.0.2.0 for Windows), and then upgrade it to 10.2.0.3.0. Start with the Oracle Enterprise Manager 10g Release 2 Grid Control media pack (DVD) and install 10.2.0.1.0 (10.2.0.2.0 for Windows)
- Insert DVD into your computer (note: It is better to copy the DVD contents to local hard disk for faster performance)
- Run runInstaller (setup.exe for Windows) to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
Important: For information about installing 10.2.0.1.0 and 10.2.0.2.0, refer to the installation guides available at:
http://www.oracle.com/technology/documentation/oem.html
2.2 Apply required patches
In the case of Grid Control environment installed via "Enterprise Manager using New Database" option, repository database version is 10.1.0.4.0. Before upgrading to 10.2.0.3, apply the patch for bug 4329444 on the Database Home. In order to apply this patch for the Solaris platform:
- Copy the p4329444_10104_<platform>.zip file from the DVD to any directory on the host which has the repository database running on.
- Unzip the file using following command:
$ unzip p4329444_10104_<platform>.zip
- Follow the instruction in 4329444/README.txt to apply the patch
For more detail on this, refer to the release note.
2.3 Install Oracle Enterprise Manager 10g Release 3
2.3.1 Copy the p3731593_102030_<platform name>.zip patch set installation archive from the DVD to any directory on the host which has the Oracle Management Service running on it.
2.3.2 Perform the installation
- Enter the following command to unzip and extract the installation files from the downloaded image described in section 1.2:
$ unzip p3731593_102030_<platform name>.zip
This extracts the files to the "3731593" directory.
- Navigate to the 3731593/Disk1 subdirectory
$ cd 3731593/Disk1
- Set the ORACLE_HOME variable to the Oracle Management Service(OMS) oracle home.
- Execute the runInstaller (setup.exe for Windows)
$ ./runInstaller
The upgrades process then upgrades the Oracle Management Service (OMS), Oracle Management Repository and the Management Agent on the same host as the OMS to the latest Enterprise Manager 10g release 3 version.
Important: The same Patch Set can be used for patching OMS,Repository, and Management Agent. For more detail on installing the patchset, refer to the release note.
2.4 Optional: Upgrading Repository Database to 10.2.0.3
If you installed Grid Control 10.2.0.1.0 (10.2.0.2.0 for Windows) via "Enterprise Manager using New Database" option, your repository database version is 10.1.0.4. In order to upgrade your repository database to 10.2.0.3, follow the steps below after upgrading your Grid Control environment to Enterprise Manager 10g release 3.
a. Upgrade the database to 10.2.0.1
b. Install 10.2.0.3 database patchset

ITunes 11.1.4 for windows has installation or upgrade problems

anyone knows why iTunes 11.1.4 for Windows cannot be upgraded and it always hit problem with the message "MobileDevice Services cannot be started....." when the upgrade or installation of iTunes 11.1.4 aborted half way with the message. I tried downloading manually the iTunes 11.1.4 for windoes package from Apple website and tried performing the installation or upgrade manually form my Windows computer. But it failed everytime with the same error message "MobileDevice Services cannot be started...." I tried on two different Windows computers (one laptop on Windows Vista and the one Desktop on Windows 7) and they all failed also. Please help if anyone knows what is wrong. Thanks.
BTW, after the failed upgrade or installation of iTunes 11.1.4 for windows, I cannot use iTunes anymore with the following error message "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." But reinstalling iTunes 11.1.4 always failed. So I am in a catch-22 situation. no way to proceed with iTunes on my Windows computers.
Clinthc

See Troubleshooting issues with iTunes for Windows updates.
tt2

No accounting document for 561E via MB1C and MIGO

Dear All
We are in MTO Scenario.
we are trying to post initial stock against sales order through MB1C VIA 561E movement.
the material document is not having an accounting document.
Please help out.
I've checked all setting as follows:
1.) [OMJJ]
for Account grouping-561E - val update-qty update-val string(WA01)-Cn(2)-GBB-BSA
       Account grouping-561E -val update-qty update-val string(WA01)-Cn(2)-PRD-PRA
2.)[OMJJ]
Update control / WM movement types
      val qty
561 -    -     E                    In.ent.st.bal:slsOrd
561 -     -     E               E     In.ent.st.bal:slsOrd
561 -    -/     E                    In.ent.st.bal:slsOrd
561 -    -/     E               E     In.ent.st.bal:slsOrd
561 -/    -/     E                    In.ent.st.bal:slsOrd
561 -/    -/     E               E     In.ent.st.bal:slsOrd
3.)Logistics - General>Material Master>Basic Settings>Material Types>Define Attributes of Material Types
                                         -->FERT     Finished Product
                                                                -->Quantity/value updating
                                                                                qty    val
                                                                            1001     FERT -/       -/
4.) [OME9] settings
   for account assign cat 'E' account modifier 'VKA'
5.) [OBYC]
    for GBB-BSA- chart of a/c-val class-G/L accounts
         PRD-PRA- chart of a/c-val class-G/L accounts
               are done and OK.
still we are not able to generate accounting document for initial posting via [MB1C]
WE HAVE EVEN TRIED TO POST VIA [MIGO], there also no accounting.
hence, we are also not able to get accounting doc for PGI via 601.
Please suggest me a solution at the earlist, I will be glad for the same.
N.B:- if posting through 561, it is ok.
Regards
Maheshoe

Maybe your SO special stock is not valuated that's why you won't get the accounting document.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b92b743ad11d189410000e829fbbd/frameset.htm
You can manage valuated or non-valuated sales order stock.
Edited by: Csaba Szommer on Mar 6, 2010 2:02 PM

Direct Tax Posting - Not booking document for a particular GL and Tax Code

Hi All,
Earlier I had been facing problem with Directly Tax Posting using BAPI BAPI_ACC_DOCUMENT_POST.
With the help of this foruma and specially from Eduardo the problem got resolved after implementing the SAP Note 487064.
However, now I am facing another accute problem which is also related to Direct Tax Posting;
My user wants to post a KR document with direct tax. He wants to mention the tax code as "XX" and corresponding GL Code as 12300. While booking this in SAP using BAPI BAPI_ACC_DOCUMENT_POST I am getting the below message:
"For tax code XX use GL Account 12345". When I tried creating this document manually in SAP I was successfully able to create the invoice with tax code XX and GL Account 12300.
If I try to create a document with a GL line (and not a tax line) with GL Code 12300 and tax Code XX, the BAPI is successfully able to book the document and I do not get any message.
Could this issue be related to the SAP note? Is there any note released for the SAP Note 487064? I do not have access to SAP notes directly so I am not able to check the notes myself.
Any help in the direction to resove this issue will be helpful.
BR
Sutirtha

Hi Sreejith,
Could you get any clue on this?
Infact, we have also encoutered a similar requirement. Please do let us know if anything worked.
Thanks
Pradeep

How to find document for WebSphere Portal Server and OIM Integration?

Last time, I used WebSphere Portal Server and OAM that works well. Herein the document for integration http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25347/websphr.htm.
Now, I would like to use OIM to integrate with WebSphere Portal Server. Is there any document like above? If yes, please let me know where I can find it or give me a link.
Hope to get your response soon.
Thanks in advance.
Message was edited by:
user596181

Is it possible to do that? I need to configure WebSphere Application Server and WebSphere Portal with enabling global security by using "Custom User Register" and LTPA to integrate with Oracle Identity Management (OIM).
Any comment is highly appreciate!

Trusted.certs question with regards to Installation and Upgrading Java

Greetings,
Thank you to all who take the time to read this especially those who can provide some answers!
Question #1:
I read that trusted.certs was not backwards compatible for Java. By this I mean that a "Java Runtime 6 Update 11" generated trusted.certs could not be read / used by "Java Runtime 6 Update 26". Is this correct?
Question #2:
Part A: Does a fresh install of Java create the trusted.certs file upon installation or at the time Java is first run after install?
Part B: When the trusted.certs is created does it do a file check to see if trusted.certs file already exists? If so does it delete and generate a fresh trusted.certs or does it leave the existing file?
Reason I ask this is that we are getting a java.io.FileNotfoundException for the trusted.certs file. This I believe to be caused by a failed upgrade of Java. When uninstalling "Java Runtime 6 Update 26" it displays "Java Runtime 6 Update 11". This leads me to believe that the trusted.certs is still for Update 11 and not Update 26 which would cause this error even after a fresh install of Java.
I would love your input and knowledge! Thank you again for your time!

I am not aware of any trusted.certs file being distributed with Java. Are you referring to the cacerts file?

Snow Leopard Installation and Upgrade Tips

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Some things to know when planning to upgrade to Snow Leopard:
General Information
• Snow Leopard will only run on a Mac with an Intel processor. It will not run on any Mac with a PowerPC processor. PowerPC-based Macs include all PowerMac G3s, PowerMac G4s and PowerMac G5s, iMac G3s, iMac G4s, iMac G5s, all PowerBooks, all iBooks, and all eMacs. There is no workaround or hack that will get around this issue and get Snow Leopard to install and run on a PowerPC-based Mac.
• An Apple web page with the major enhancements and refinements in Snow Leopard can be found here:
http://www.apple.com/macosx/refinements/enhancements-refinements.html
• An article with a useful summary about Snow Leopard and 64-bit computing can be found here:
http://www.macfixit.com/article.php?story=20090826074252596
Tips
• IMPORTANT: As with any upgrade, you need to confirm compatibility of all your applications and drivers with Snow Leopard before you upgrade. Some major items of note:
Snow Leopard only ships with Java 1.6, so any applications built with Java must include support for 1.6 or the application will fail. Applications that currently use Java and are reported not to work include (but are by no means limited to) SPSS, ClamXav and Cyberduck.
Snow Leopard has severely restricted or in many cases eliminated the use of Input Managers, so applications that depended on those will fail. Logitech's mouse drivers appear to fall into this category.
Many applications that are or include menu bar components will fail if they depend on Unsanity's Menu Extra Enabler or the open-source Menu Cracker.
Apple has a list of software officially stated to be incompatible with Snow Leopard here:
http://support.apple.com/kb/HT3258
There's also an ongoing compatibility list is being maintained here:
http://snowleopard.wikidot.com/
Reports on that site are unofficial but may be useful.
• Snow Leopard no longer includes AppleTalk, so you will no longer be able to use any AppleTalk-only printers or other devices.
• Safari by default will launch in 64-bit mode on those systems that support 64-bit processing (which includes all Macs with Intel Core 2 Duo or Xeon processor). If you have Safari plug-ins that are not working, quit Safari, Get Info on the Safari application, and select "Open in 32-bit mode" and relaunch Safari.
• QuickTime Player X has some ability to trim and convert media, but no longer includes many of the former options available in QuickTime Pro. QuickTime 7 Player is available as an optional installation for those who still need the additional Pro features. If you have QuickTime 7 Pro installed in Leopard and are upgrading, the Snow Leopard installer should install QuickTime 7 Player automatically and preserve your Pro key. Apple has made no mention of a Pro version of QuickTime X.
• The Snow Leopard installer reportedly removes the Script subfolders from /Library/Scripts/, so if you are upgrading Mac OS X 10.5 Leopard, before performing the upgrade make a backup of the Address Book Scripts, Basics, Finder Scripts, Info Scripts, Internet Services, and Navigation Scripts subfolders and then copy them back to /Library/Scripts/ after installing the update.
This is the 1st version of this tip. It was submitted on August 28, 2009 by Dave Sawyer.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Welcome to the Apple Support Communities
As the computer froze during the Snow Leopard installation, it's possible that Snow Leopard wasn't installed correctly and Snow Leopard can't start, so you have to reinstall Snow Leopard. To do it, insert the Snow Leopard disc, hold the C key while your computer is starting and follow the steps to reinstall Snow Leopard. You won't lose anything you had saved

Installation and upgrade questions.

I posted this in Photoshop and got no response so i am re-posting it here. (thanks)
My daughter has photoshop cs4 via one of the suites (design premium).
It was originally installed on her old computer as a 32 bit version.
She now has a 64 bit machine. I drive imaged the old drive to the new machine and did all the hardware drivers, and it is working perfectly.
It is vista home premium.
How can she upgrade to the 64 bit version of photoshop without breaking her installation or loosing any of her work?
If I upgrade her OS to windows 7 Pro (x64), will that be a problem?
I have downloaded the master suite trial instalation files onto my drive. My goal is to create an installation dvd set and use it to install trial versions of the various products on a couple of different machines. The entire folder structure is over 8 gig, So i need two DVDs.
How do i split the resulting un compressed master suite installation folders to two dvds so that it functions as an install dvd?
If my son ends up buying just one product (say dreamweaver), Can he unlock the copy of dreamweaver that was installed via the master suite install dvd? or does he have to uninstall the master suite copy and re-install the dreamweaver cs4 download?
If the trial expires, can he unlock it at some point later if he purchases a key?
Does each product within the master suite have its own trial expiration date based on when that particular product was installed? or once you install one product from the master suite install dvd, the date is set for all products?
Thanks
Jerry C

function(){return A.apply(null,[this].concat($A(arguments)))}
My daughter has photoshop cs4 via one of the suites (design premium).
It was originally installed on her old computer as a 32 bit version.
She now has a 64 bit machine. I drive imaged the old drive to the new machine and did all the hardware drivers, and it is working perfectly.
It is vista home premium.
How can she upgrade to the 64 bit version of photoshop without breaking her installation or loosing any of her work?
If I upgrade her OS to windows 7 Pro (x64), will that be a problem?
Cannot answer you definitely about installing 64 bit Photoshop but I suggest inserting the DVD and installing Photoshop only. The DVD should pick up that you're on a 64 bit OS and offer you 64 bit Photoshop.
I suggest clean installing Windows 7, rather than upgrade installing. That would mean reinstalling all software and drivers but it's the most reliable method in my experience.
function(){return A.apply(null,[this].concat($A(arguments)))}
I have downloaded the master suite trial instalation files onto my drive. My goal is to create an installation dvd set and use it to install trial versions of the various products on a couple of different machines. The entire folder structure is over 8 gig, So i need two DVDs.
How do i split the resulting un compressed master suite installation folders to two dvds so that it functions as an install dvd?
If my son ends up buying just one product (say dreamweaver), Can he unlock the copy of dreamweaver that was installed via the master suite install dvd? or does he have to uninstall the master suite copy and re-install the dreamweaver cs4 download?
If the trial expires, can he unlock it at some point later if he purchases a key?
Does each product within the master suite have its own trial expiration date based on when that particular product was installed? or once you install one product from the master suite install dvd, the date is set for all products?
Thanks
Jerry C
I suspect you'll struggle to split Suites to install individual products on various machines (if that's what you mean). Suites are far more than a simple collection of the individual software titles. They're tightly integrated, must be installed on the same machine together and are all tied to a single suite serial number which is unrelated to the individual product serial numbers. I believe the downloaded Suite file has to be installed as one.
I don't know of a way to burn the downloaded file across 2 DVDs.
If your son only purchases Dreamweaver, he'll have to uninstall the Master Suite and re-install the DW download.
If the trial expires, it'll keep showing a Trial has expired screen and you cannot go further. Once you enter a valid serial number, it'll launch normally.
My understanding of the Suites is that all products are integrated. Once the trial version of a single product in the suite is launched, my understanding is that the clock starts ticking for all products in the suite. That said, I have not tried launching individual products in the Trial versions more than 30 days apart.

Adobe lightroom 4 installation and upgrade version

I had a trial version or adobe light room installed as 4.3, had trouble utilising website for purchase so bought a disk which installed as version 4.1, now there are both on the systm, how do I upgrade the serial coded to 4.3 version and delete the 4.1 version?

Which operating system are you using is the first question. The serial number information may be removed when you remove Photoshop Lightroom 4.1. You should be able to re-enter the serial number though when you open Photoshop Lightroom 4.3.

CRYSTAL Reports 2010 for VS 2010 Installation and Deployment issues

On Installing Crystal Reports for Visual Studio 2010 the Crystal Report Viewer in the Toolbox reports itself as Version 13.0.2000.0. When dragging said viewer onto an ASPX Page it: -
1) Comes up with the wrong version: - Assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304", NOT 13.0.2000.0!
2) The ADE visualisation of the ASPX Page comes up with the following error: - "Error Creating Control - ContentPlaceHolder1. SessionState can only be used when enableSessionState is set to true. ...............
In my Web.Config file enableSessionState is set to true AND System.Web,SessionStateModule is referenced in <httpModules> the message is therefore less than helpful.
3) Surprisingly when I correct the Version to 13.0.2000.0, the same error happens. Even more surprisingly the page builds and in the development environment the CrystalReportViewer works@#@!! Unfortunately when deployed to a production Web Serrver W2K8 x64 and IIS7.x the page loads but the viewer does not, no errors are caught, the event viewer log is happy. (The click-once Runtimes x32 and x64 have been installed on the server).
The same code works fine in VS2008 targetting CR 2008.
How do I:
1) Get CR2010 for VS2101 Installed Correctly?
2) Deploy The Viewer to a production server?

This is a known issue (unfortunately, no KB created yet as I just duplicated and reported the issue to QA (tracking number; ADAPT01506220) two days ago).
The issue appears only on computers with side by side install of .NET 2008 and .NET 2010.
Follow these steps to resolve the issue:
1) Remove the following from the web.config:
<add assembly="CrystalDecisions.Shared, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
2) Open the form that has the viewer on it, go to code behind and replace this:
<%@ Register assembly="CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
with:
<%@ Register assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web"; tagprefix="CR" %>
3) Go to the Properties of the project, select references and remove crystaldecisions.web of version 10.5.3700
4) In the Properties, click the Add button and then the .NET tab and select crystaldecisions.web version 13.0.2000.0
5) Recompile.
Distribute the CRVS2010 runtime.
MSM:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
32 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
64 bit MSI:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
BTW. the same issue exists with WIN apps. The fix here is much easier; Remove all CR 10.5.3700 references from the project and add references to 13.0.2000 assemblies. (tracking number; ADAPT01506310).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Installation and upgrade

Our village is getting fiberoptic broadband installed in a few months time. If we begin subscribing to bt broadband will we be automatically upgraded to fiberoptic when it is installed?

No
you would need to recontract to change to fibre connection - infinity. It is not automatic
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Installation and Upgrades: retaining existing settings

Is there a way to upgrade QuickTime while retaining a user's settings? The settings I need to retain are disabling of the system tray icon and removal of the desktop and quick launch shortcut.

If you do not want to reset the router you can just power cycle the connection and then check the connectivity status. If still the issue persists and if you do not want to loose the router settings then you can take the back of the current settings. The Backup and Restore feature of the Linksys router enables the user to backup the current settings of the router and restore them after resetting the device. It is recommended to back up the router's configurations before resetting the router to factory defaults or upgrading the router's firmware. This way, there will be no need to reconfigure the router after performing reset or upgrade.
Here is the link to take the Backup and Restore the settings: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=15849&userrole=Links...
The check the connectivity status again…

Docu for 7.5 ::: installation and upgrade

Similar Messages

Maybe you are looking for