Trusted.certs question with regards to Installation and Upgrading Java

Greetings,
Thank you to all who take the time to read this especially those who can provide some answers!
Question #1:
I read that trusted.certs was not backwards compatible for Java. By this I mean that a "Java Runtime 6 Update 11" generated trusted.certs could not be read / used by "Java Runtime 6 Update 26". Is this correct?
Question #2:
Part A: Does a fresh install of Java create the trusted.certs file upon installation or at the time Java is first run after install?
Part B: When the trusted.certs is created does it do a file check to see if trusted.certs file already exists? If so does it delete and generate a fresh trusted.certs or does it leave the existing file?
Reason I ask this is that we are getting a java.io.FileNotfoundException for the trusted.certs file. This I believe to be caused by a failed upgrade of Java. When uninstalling "Java Runtime 6 Update 26" it displays "Java Runtime 6 Update 11". This leads me to believe that the trusted.certs is still for Update 11 and not Update 26 which would cause this error even after a fresh install of Java.
I would love your input and knowledge! Thank you again for your time!

I am not aware of any trusted.certs file being distributed with Java. Are you referring to the cacerts file?

Similar Messages

BO XI 3.1 installation and Upgrade activity Steps

Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
         j2re1.4.2_04
         j2re1.4.2_16
         jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
Sridharan

Hi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb.

OEM 10.2.0.1 installation and upgrade to 10.2.0.3

Dear all,
I want to install the latest version of OEM 10.2.0.3 on Linux RedHat 4. However, after downloading the OEM 10.2.0.3 and reading the release note, I realized that the download is just the 10.2.0.3 upgrade patchset. I have to do a fresh base installation of OEM 10.2.0.1 first. Is this correct?
After installing OEM 10.2.0.1 with an existing 10.2.0.1 database, I need to upgrade OEM 10.2.0.1 to OEM 10.2.0.3 using the patchset I downloaded. Because both OMS and AGENT will be upgraded, I am not sure what installation destination I shoud supply? OMS_HOME, or AGENT_HOME, or just a new home for upgrade? What are the required steps to upgrade OEM 10.2.0.1 to OEM 10.2.0.3?
Are there any documentation or articles that I can follow to do the upgrade?
Thanks a lot in advanced.
Xiaoping

There is a README.txt file in the 10.2.0.3 patchset zip file that has the instructions for upgrading 10.2.0.1 OEM to 10.2.0.3.
You download 10.2.0.1 separately which delivers a 10.1.0.4 database. Apply the one-off database patch to the db10g 10.1.0.4 Oracle Home via opatch, then use runInstaller to upgrade to 10.2.0.3 via 3731593. You can optionally create a db10gr2 10.2.0.1 Oracle Home, apply the 10.2.0.3 patchset then run dbua to upgrade the 10.1.0.4 repository database to 10.2.0.3.
You probably would have had fast response posting to the Enterprise Manager Grid Control forum:
Enterprise Manager
2. Fresh Installation of Enterprise Manger 10g Grid Control Release 2 and upgrading it to Release 3
In order to install Enterprise Manager 10g Grid Control Release 3, you must install either 10.2.0.1.0 or 10.2.0.2.0 Grid Control environment. This section describes steps to install Enterprise Manager 10g Grid Control Release 3 environment starting with 10.2.0.1.0 (10.2.0.2.0 for Windows) install
2.1 Install Oracle Enterprise Manager 10g Release 2
Installing 10g Grid Control Release 3 requires any previous releases of Grid Control, that is any 10.2.x.x.x installation, and upgrade to 10.2.0.3.0 release. If you do not have a previous release, but want to have a 10.2.0.3.0 Grid Control environment, then first install 10.2.0.1.0 Grid Control (10.2.0.2.0 for Windows), and then upgrade it to 10.2.0.3.0. Start with the Oracle Enterprise Manager 10g Release 2 Grid Control media pack (DVD) and install 10.2.0.1.0 (10.2.0.2.0 for Windows)
- Insert DVD into your computer (note: It is better to copy the DVD contents to local hard disk for faster performance)
- Run runInstaller (setup.exe for Windows) to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
Important: For information about installing 10.2.0.1.0 and 10.2.0.2.0, refer to the installation guides available at:
http://www.oracle.com/technology/documentation/oem.html
2.2 Apply required patches
In the case of Grid Control environment installed via "Enterprise Manager using New Database" option, repository database version is 10.1.0.4.0. Before upgrading to 10.2.0.3, apply the patch for bug 4329444 on the Database Home. In order to apply this patch for the Solaris platform:
- Copy the p4329444_10104_<platform>.zip file from the DVD to any directory on the host which has the repository database running on.
- Unzip the file using following command:
$ unzip p4329444_10104_<platform>.zip
- Follow the instruction in 4329444/README.txt to apply the patch
For more detail on this, refer to the release note.
2.3 Install Oracle Enterprise Manager 10g Release 3
2.3.1 Copy the p3731593_102030_<platform name>.zip patch set installation archive from the DVD to any directory on the host which has the Oracle Management Service running on it.
2.3.2 Perform the installation
- Enter the following command to unzip and extract the installation files from the downloaded image described in section 1.2:
$ unzip p3731593_102030_<platform name>.zip
This extracts the files to the "3731593" directory.
- Navigate to the 3731593/Disk1 subdirectory
$ cd 3731593/Disk1
- Set the ORACLE_HOME variable to the Oracle Management Service(OMS) oracle home.
- Execute the runInstaller (setup.exe for Windows)
$ ./runInstaller
The upgrades process then upgrades the Oracle Management Service (OMS), Oracle Management Repository and the Management Agent on the same host as the OMS to the latest Enterprise Manager 10g release 3 version.
Important: The same Patch Set can be used for patching OMS,Repository, and Management Agent. For more detail on installing the patchset, refer to the release note.
2.4 Optional: Upgrading Repository Database to 10.2.0.3
If you installed Grid Control 10.2.0.1.0 (10.2.0.2.0 for Windows) via "Enterprise Manager using New Database" option, your repository database version is 10.1.0.4. In order to upgrade your repository database to 10.2.0.3, follow the steps below after upgrading your Grid Control environment to Enterprise Manager 10g release 3.
a. Upgrade the database to 10.2.0.1
b. Install 10.2.0.3 database patchset

Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, ju

Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, just want to buy an upgrade to something that will run for a while longer. I don't care about Lightroom, Bridge, Illustrator, etc.; most of those I've deleted over the years. But I do use Photoshop - or would if it would still run. What options do I have?

This is the java you need for photoshop cs5 to work on mac os x 10.10 Yosemite
https://support.apple.com/kb/DL1572?locale=en_US
It's also possible you may have to reinstall photoshop cs5 even after installing the above java, because sometimes the upgrade to mac os x 10.10 messes up the photoshop cs5 installation.
You can download photoshop cs5 from here if you don't already have the install media.
https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Is adobe reader, acrobat requires system reboot for installation and upgradation

is adobe reader, acrobat requires system reboot for installation and upgradation?

Hi Rave,
Thanks for your reply.
we have a vulnerabilities scan on adobe systems. it shows as below .
Plugin Name
Remarks
Family
current version
Adobe Reader Unsupported Version Detection
Upgrade to latest version(http://www.adobe.com/support/programs/policies/supported.html)
Windows
Adobe Reader 9.5.5 9.5.5
please tell me how to fix it.
thanks in advance .
Regards,
Harish

Query with regards to installation of Infinity fol...

Following my home move my infinity installation differed from my previous address and I was generally disappointed with the engineer. The RJ11 (think thats the name of the cable) that runs from my openreach modem to the master socket is connected to the side of the master socket faceplate rather than the simply putting the cable into the front. This differed to my previous address where I simply plugged the RJ11 cable into the master socket.
Now the other end of the RJ11 runs into my bedroom upstairs as this is where I wanted my homehub to be. However I have a few gripes with what the engiineer did. Firstly he left me around 5 metres short and secondly didn't even bother to drill through any walls. So the cable is between the crack of the door which of course means I couldn't shut my bedroom door. Just to explain, the RJ11 cable from my master socket runs into a white small box which allows another RJ11 to be connected on the other end.
The other day I lost connection and knew the cause was this extended RJ11 cable as my connection was fine if I plugged the RJ11, Modem, Hub directly into the RJ11 port on the front of my master socket. The cause was the tiny blue cable had snapped off the small white box that extends into my bedroom. Thankfully it was easy to fix myself. However when I did so my speed went from 45mbps to 67mbps! This to me suggests the cable was incorrectly connected.
My last question is why if I connect the RJ11, Modem, Hub directly into the front of my master socket is the speed around 20-30mbps slower than if I use the RJ11 that is connected to the side of the master socket?
Sorry I have one more question. Im still using the Home Hub 4 and was expecting BT to send me a Home Hub 5. I thought following a home move my contract was renewed which mean't I automatically qualified for a new home hub?
If anyone is confused by my installation I can upload some pics.

Hi DJM,
It does sound like a bit of a strange set up. I can take a look at this for you. Please send me in your details using the "Contact The Mods" link found in my profile.
With regards to the Hub 4 a home move order would renew your current package for the further 12 months and would not include the Hub 5.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

License key question with regards to upgrading from 7/8.1 to 10

Hi, I hope I've posted my question in the right area of the forum:
I understand that Windows 10 will be a free upgrade for Win7/Win8 users.
That's really wonderful but I was wondering what the exact mechanism with regards to our 7/8 license keys. Here's a couple examples to clarify my question:
first, example: I have Windows 7 Pro license and say I upgrade to 10 within the first year. Let's say I need to reinstall Windows after that first year is finished will I still be able to use that same license key I used to upgrade 7 to 10 to install a fresh
copy of Windows 10 or will I need to purchase a new license because the year is elapsed?
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7... because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road:
where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
Thanks for the feedback!

Hi Momashi
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7...
because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road: where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
If you Upgrade to Windows 10 and do not like it, for whatever reason.
Before you upgrade to Windows 10.
Create an image of windows 7 to an external HD and a recovery CD, using windows 7 Backup and Restore.
You can re-install windows 7 in the SAME SYSTEM using the recovery CD without using a key.
Hope it helps
Where did you get your outlandish information about a Windows 7 key turning into a Windows 10 key? Nothing in the past has ever happened like this before, so what makes you think it will happen with Windows 10?
My Windows ME did not turn into a Windows XP key!
My Windows XP key did not turn into a Windows Vista key!
My Windows Vista key did not turn into a Windows 7 key!
And so on!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Issue regarding Thin Installer and driver packages

Hello everybody,
I have recently started to work for a new company and have been tasked with creating a new Windows deployment solution.
My company are using Lenovo desktop and laptop and my installation image use Thin Installer to deploy drivers to our workstations during Windows deployment.
I have been having some difficulties getting everything to work and I want to write about it here to hopefully help someone in the same situation as me and call out for better quality control at Lenovo.
Here are the command line I call to start Thin Installer from the local computer:
START /WAIT thininstaller.exe /CM -search A -action INSTALL -repository \\wds\lenovo -noicon -showprogress -IncludeRebootPackages 1,3,4 -noreboot
Hers the issues I have expirienced:
1. Sometimes packages downloaded with Update Retriever will be set to "Reboot type: Forces a reboot" as default. This causes the Thin Installer to reboot reguardless of the -noreboot switch.
Its possible to change reboot type "Requires a reboot" in Update Retriever and than the updates installs fine.
This causes problem with scripted installs where you cannot have the system reboot "out of order".
Updates should never be default "forces a reboot".
2. On my Thinkcenter e93z (10B8) the Intel Displaydriver (v 9.18.10.3220) wont install because the PnPID is not listed in the XML file. (my PnPID is VEN_8086&DEV_041E&SUBSYS_309C17AA (309D17AA is listed tho)). Manualy editing the XML files to include my PnPID solves the problem.
Lenovo should really have better qualitycontrol here.
3. On a t440s machine i have the Synaptics UltraNav Driver (v. 17.0.12.60) wont install automatically with Thin Installer.
This is because the machine i installed failed the "BIOS test" in the XML file of the update package. I manually edited the XML file and replaced the "BIOS TEST" with one from another update that worked on that system and now everything installs automatically and works fine.
Its possible that Lenovo has detected some kind of problem with my BIOS version and the Synaptics driver but everything seems to work fine for me.
I hope this post will help someone in the future
EDIT: Other people have called out some problems with the information provied in this post. You should read the whole thread before making any changes to your systems.
Kind Regards,
2bi

2bi,
Thanks for posting your findings. I will investigate and escalate the missing PnP id issue for the Display Driver issue. We absolutely need to avoid these kinds of escapes.
For you ThinInstaller command line I would recommend not using the -showprogress parameter if you are using in a scripted deployment scenario with something like MDT and/or SCCM. These solutions typically will not allow TI to interact with the desktop during deployment which is what -showprogress will cause.
Also, you are telling TI to include packages that will automatically reboot your system (type 1), requires a reboot which can be delayed (type 3), will shutdown the machine automatically (type 4). We have very few type 4 packages anymore; however we definitely have type 1 and type 3. As sclexman mentioned, the -noreboot will only apply to the type 3 packages which leave the execution of the reboot up to TI. So -noreboot tells TI that even if it installs updates of type 3, it should not reboot when finished.
Changing the Reboot Type value in Update Retriever only changes how TI sees the package and does not alter how the package itself executes. So if a package is designed to always automatically reboot, changing it to type 3 in UR will have no affect. We have recently had a display driver released by Intel that will automatically reboot if the driver installer detects that it is upgrading an older version of the driver. In a clean deployment scenario, the automatic reboot will not happen so in this case it is safe to change the type to type 3.
This leads to another point. All of our content that is available through Update Retriever is also intended for consumption by System Update which is the utility aimed at individual consumers to help them keep their drivers up to date. Therefore this becomes our lowest common denominator that we have to support. This leads to situations that may not be ideal for the deployment scenario. If we had an army of resources we might be able to manage all of our content for both consumers and enterprise deployments; in effect doubling our efforts. Unfortunately this is not the case and we are trying to do the best we can.
Regarding the UltraNav update for T440s, I see that the XML has a _BIOS section under the Dependencies. However it is defined such that any BIOS level will work because the first level listed is a wildcard asterisk (*). This BIOS section is actually included for a completely different solution which also uses the XML. It is not intended to control the targeting of the update for System Update or Thin Installer. Perhaps there was a mistake made initially and the XML was released without the * and has since been fixed.
(from the current UltraNav driver package: )
<_Bios>
<Level>*</Level>
<Level>GGET*</Level>
<Level>GFET*</Level>
<Level>GHET*</Level>
<Level>GIET*</Level>
<Level>GJET*</Level>
<Level>GLET*</Level>
<Level>GMET*</Level>
<Level>GNET*</Level>
<Level>GRET*</Level>
</_Bios>

Snow Leopard Installation and Upgrade Tips

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Some things to know when planning to upgrade to Snow Leopard:
General Information
• Snow Leopard will only run on a Mac with an Intel processor. It will not run on any Mac with a PowerPC processor. PowerPC-based Macs include all PowerMac G3s, PowerMac G4s and PowerMac G5s, iMac G3s, iMac G4s, iMac G5s, all PowerBooks, all iBooks, and all eMacs. There is no workaround or hack that will get around this issue and get Snow Leopard to install and run on a PowerPC-based Mac.
• An Apple web page with the major enhancements and refinements in Snow Leopard can be found here:
http://www.apple.com/macosx/refinements/enhancements-refinements.html
• An article with a useful summary about Snow Leopard and 64-bit computing can be found here:
http://www.macfixit.com/article.php?story=20090826074252596
Tips
• IMPORTANT: As with any upgrade, you need to confirm compatibility of all your applications and drivers with Snow Leopard before you upgrade. Some major items of note:
Snow Leopard only ships with Java 1.6, so any applications built with Java must include support for 1.6 or the application will fail. Applications that currently use Java and are reported not to work include (but are by no means limited to) SPSS, ClamXav and Cyberduck.
Snow Leopard has severely restricted or in many cases eliminated the use of Input Managers, so applications that depended on those will fail. Logitech's mouse drivers appear to fall into this category.
Many applications that are or include menu bar components will fail if they depend on Unsanity's Menu Extra Enabler or the open-source Menu Cracker.
Apple has a list of software officially stated to be incompatible with Snow Leopard here:
http://support.apple.com/kb/HT3258
There's also an ongoing compatibility list is being maintained here:
http://snowleopard.wikidot.com/
Reports on that site are unofficial but may be useful.
• Snow Leopard no longer includes AppleTalk, so you will no longer be able to use any AppleTalk-only printers or other devices.
• Safari by default will launch in 64-bit mode on those systems that support 64-bit processing (which includes all Macs with Intel Core 2 Duo or Xeon processor). If you have Safari plug-ins that are not working, quit Safari, Get Info on the Safari application, and select "Open in 32-bit mode" and relaunch Safari.
• QuickTime Player X has some ability to trim and convert media, but no longer includes many of the former options available in QuickTime Pro. QuickTime 7 Player is available as an optional installation for those who still need the additional Pro features. If you have QuickTime 7 Pro installed in Leopard and are upgrading, the Snow Leopard installer should install QuickTime 7 Player automatically and preserve your Pro key. Apple has made no mention of a Pro version of QuickTime X.
• The Snow Leopard installer reportedly removes the Script subfolders from /Library/Scripts/, so if you are upgrading Mac OS X 10.5 Leopard, before performing the upgrade make a backup of the Address Book Scripts, Basics, Finder Scripts, Info Scripts, Internet Services, and Navigation Scripts subfolders and then copy them back to /Library/Scripts/ after installing the update.
This is the 1st version of this tip. It was submitted on August 28, 2009 by Dave Sawyer.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Welcome to the Apple Support Communities
As the computer froze during the Snow Leopard installation, it's possible that Snow Leopard wasn't installed correctly and Snow Leopard can't start, so you have to reinstall Snow Leopard. To do it, insert the Snow Leopard disc, hold the C key while your computer is starting and follow the steps to reinstall Snow Leopard. You won't lose anything you had saved

Exported Jpgs - Questions with regards to color profiles and web browsers

I along with others have noted the fact that it's not possible to instruct apertrue to save images without a profile. Up until recently I've been saving my images with the sRGB profile. I noted (as has been posted about elsewhere on the forums) that safari displays the image one way, and Firefox another. As others have noted, this is due to Safari being a color managed browser, and Firefox not being color managed.
However, when I save a jpg out of photoshop with NO color profile applied the image looks identical in both browsers.
I'm considering not using profiles as all if saving an image with an sRGB colorspace profile allows me to change the behavior so that Safari matches Firefox. I would love to go the other way (to do something magical to effect the way that images appear in Firefox) but that doesn't seem to be an options here.
So, after all that, my questions are:
1.) What is it specifically about not applying a profile, that makes Safari render images identically to FireFox (in other words, what's going on?)
2.) Is there any way to apply NO profile to an exported Aperture Raw image...not the camera profile, not sRGB...NOTHING.
I would guess a good runner up would be to use Automator to strip out the profile. But before I go making changes to my workflow, I'd really like to know why exactly this seems to work.

This doesn't produce the same effect as in Photoshop.
Photoshop has the ability to 'convert to profile'– to actually change the colors in an image so that even in a profile isn't embedded, the colors have been changed. If you choose to, you can also have Photoshop embed the profile as well.
Aperture on the other hand, -seems- to only have the ability to attach a profile to an image. In other words, it relys on color aware apps to interpret the image using the attached profile. (I can't seem to find a way to 'convert' to a profile in Aperture, in the same way I can in Photoshop– doesn't mean one doesn't exist, I just can't seem to find it)

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

Regarding XI installation and Learning

Hi All,
I am very new to XI and i want to get into XI domain.
At present i am actually into SAP-ABAP from 2 years.
As i want to learn XI so i want some suggestions from all you guys familiar with XI.
I have some questions regarding XI.
1. What is the system configuration required for installing XI!
2. Can we get the XI software [Trail versions-Down load] from any web sites!
3. What are the prerequisities for learning XI.
 Like what are the languages we should be familiar
 before for learning XI!
4. Actually what is XI is all about!
5. Can anybody send me good material for XI for me to
 proceed further.
 If anybody having very good material in XI please
 forward the same to :
 My Personnal Mail ID : [email protected].
I will be very much helpful if any body help me in this regard.
Any help for the same will be appreciated very much.
Looking forward to all you people's help.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
<a href="/people/sap.user72/blog/2005/05/31/my-experience-with-xi-installation-on-fedora-core-3-linux installation</a>
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com. So I think it will be better for you to search information there rather than me just providing you links.which will just go on and on and on.so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.
Regards,
Abhy

Dual boot with two arch installations and gummiboot

Hi,
I found similar topics regarding this matter, but they couldn't resolve my doubts, so I ask once again.
I currently have an EFI partition with gummiboot and will like to add a new arch installation (to have different configurations, packages versions and repositories. I came to the conclusion that this is the cleanest way to achieve what I want). I think I could use the same partition but if I mount it on /boot there will be problems when I upgrade the kernel because it will override the image in the partition when running mkinitcpio. Maybe if I maintain both installations in sync everything would be fine, but on the long run I think this could cause problems.
I considered to edit /etc/mkinitcpio.d/linux.preset in one of the installations to change the name of the image, thus both images could cohabit in the same partition, but I don't know if there are some cleaner way to achieve what I want.
Thanks.

TheSaint wrote:It'll be necessary to configure mkinitcpio to address the correct path in order that the future kernel updates will go to ther right place.
See this for details.
I don't think so -- the use of a bind mount means that the kernel image can go in the standard location, that's the whole point of it.
@OP: Yes, just make sure to call the path to the respective kernel images relative to $ESP

A few questions with regards to slicing text

Hi there,
I have been busy slicing my image up in fireworks and i am
very happy with it, i am using the extended script for slicing...
Anyway, all is going well :-) After some help yesterday...
But i have come across a small issue, i am going to try and
explain it without rambling too much .. i hope somebody understands
I have a sort of rounded rectangle (well it round on the
right hand side) .. and this has text over the top.. They are both
on a different layer (fireworks layer).. i.e. square with round
corners on right and text that sits in it = 2 fireworks layers
I highlight the left part of the graphic and Edit, Insert,
Slice and the little bit on the right for my rounded part, i draw
the slice in, my idea is to have a div and the left not a graphic
just a color and the right is an image (background)..
and then obviously the text within the left part (which is
only a color) - the text needs to be kept as html text as they will
be anchors
Problem is.. the right part is ok.. (my rounded corners)..
but my left part i have set to Background image and it exports it
as an image with the text as an image..
Actually thinking about that ... thats pretty logical!! ah
ah... How do i say export this has a background color only?
I tried chaning the slice type to HTML, do i need to enter
something in here???
And how would i get the text also to be entered in
I hope i sort of made myself understood, if not i can post a
few screenshots....????
They do say a picture is worth a thousand words :-)
Thanks alot in advance

Hey Ian:
Auto slices do exist, but they are only an issue if you
export HTML and
Images. CSS and Images ignores any unsliced areas (other than
text or
simple rectangles)
So if you're going the CSS route, yes, you will need to slice
all the
pieces you need, which need to remain as graphics. The
advantage to this
method is that you do not end up with a whole bunch of
unnecessary auto
sliced graphics,which you would get from exporting as HTML
and images.
Also, slicing gives you the ability to individually optimize
each slice
graphic AND give them useful names. Auto slices in FW have
auto-generated file names, which you cannot customize.
As I've mentioned, CSS and Images will respect rectangles and
export
them as DIV's. The catch is the rectangle must be created in
FW for this
to work. PS vectors (or bitmap boxes) are not respected as
true
rectangles for export.
So, what I did with your template was create a new rectangle,
edit it so
the one corner was rounded, and delete the main navigation
bar slice. I
restructured the objects in the Layers panel (gawd love
poorly organized
templates - so many objects, all called
layer-something-or-other)so my
new rectangle was underneath the navbar text. I left the text
visible.
And I gave the new rectangle a name: navbar.
I created slices for the other obvious graphics, as well.
Went to File > Export and chose CSS and Images.
The export produced a page layout relatively similar to the
design,
including a DIV called "navbar" for the submenu, and real
text.
Is it perfect? No. Just try adding a couple more links and
you'll see
what happens.
All this is great from a mock up perspective, but I'm betting
that you
will want different submenus to dynamically appear depending
on the main
menu choice. That cannot be done using Fireworks. You'll want
to look at
other solutions, perhaps from Project 7, for CSS-based pop up
menus,
which work with Dreamweaver to simplify the creation of pop
up menus.
I hope this helps. email me off-list if you like, and I will
send you
the updated PNG file.
IanJG wrote:
> Jim ok.. i think all ok.. just checked them and they
appear to have uploaded ok.
>
> once i am ready to export for the web, i presume i
should do what you said
> before and HIDE all text before export and insert the
text via HTML..
>
> SUch things as AUTOSLICES / USERSLICES don't really
exist in fireworks then??
> Sorry no expert but playing around with photoshop (of
course not as powerful
> for slicing as fireworks) it sort of created Autoslices
were slices needed to
> be made..
>
> I presume i need to slice every little bit of the
document.. rather than
> depending on autoslices
>
> Again thanks... if i have missed something or not
explained something welll...
> please let me know
>
> Regards
>
GE
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Question with regard to dual ethernet ports

First let me say that I am a novice at networking, so this may be a stupid question. I had my network plugged into on of the ethernet ports and was unable to access a forum I visit. I could access most every other website, but not this particular one. I switched the ethernet cable to the other port and the problem resolved itself. Why would I be able to access it from the one port and not the other?
G5 quad core Mac OS X (10.4.6) 1 gig of Ram

Hi Jaya,
Thank you very much for your correspondence and I am very sorry to
mislead you.
What I would like to do is to link an existing partner record with
an existing lead record. Since both records already exist, I set
the rowid to both records. However I got the error.
Could you please give me an advice?
Thanks,
Naoyuki

Trusted.certs question with regards to Installation and Upgrading Java

Similar Messages

Maybe you are looking for