Document flow icon - disabled

Hi All,
Many service orders for which the service confirmations are created , the document flow icon is disabled ( greyed out ) and not able to view the subseding and preceeding documents.
If you have any clue , Pl  help.
Thanx.
Anitha

Hi,
This might be possible the you do not have the authorization for this(Authorization object is not assign to you ) plz check this.
If it is assign to you then there might be some coding is written in HTM page of the specific view plz check this you might be get the code.
Best Regards,
Durga Prasad

Similar Messages

  • Sales Order document Flow in Reports

    Hi All,
    I am develoing a Custom Sales Order report in ALV.  Here the requirement is to include the Document Flow for the line item.  This should be similar to the Icon in VA03 transaction.  When I click this icon in my report, it should display the document flow (same as that of available in VA03 transaction).  Can you suggest how can I get Document Flow icon in my Report?
    Thanks in Advance.
    Regards Munna.

    Just to save time for others who have the same requirement , use below,  fill the structure with sales order and other details. Leave the posnr blank if you need document flow , else fill the posnr if it is item level.
    CALL DIALOG 'RV_DOCUMENT_FLOW'
            EXPORTING
                 VBCO6      FROM VBCO6
                 MAKT-MAKTX FROM SPACE
                 KNA1-KUNNR FROM kunnr2000
                 KNA1-NAME1 FROM name
                 MAKT-MATNR FROM SPACE
                 IVKORG     FROM VKORG
                 IVTWEG     FROM VTWEG.
    No custom screen required, no tree control required, no coding required except that you need to call this at right place in your module pool/ report etc. SAP internally uses this for display in SAPMV45A.
    Hope it helps.
    Regards/Ajay

  • Document flow of Inbound Delivery

    Dear Gurus,
    We have upgraded to support pack SAPKH60018 from SAPKH60010.
    Earlier the process for goods receipt was followed as described below
    1. Purchase order
    2. Inbound Delivery
    3. GR in to Blocked stock against Inbound Delivery (mvmt type 103)
    3. Release GR blocked stock (mvmt type 105)
    Now after upgrading the support pack when GR blocked stock is made against the Inbound Delivery system is not updating the Document number in the document flow and PGR button is not disabled though 103 mvmt type document is made through migo.
    System is also not allowing to make the Release GR block stock through MIGO and prompting to use Inbound Delivery Dialog instead.
    Request for immediate assitance in regard to this issue.
    Regards
    Danish Alam.

    With the support pack in case if material is serialized for such plant you can post goods receipt only in VL32N which would happen only during 105 mvt type and you cannot post goods receipt using MIGO.

  • Document flow

    Dear All,
    Can anyone suggest how, based on a list of sales orders i will be able to query to see the corresponding delivery numbers and invoice numbers?
    Is there some way predefined in SAP? i just want to plug in the order numbers and geta  report showing the order number, delivery number and invoice number or something like that.

    Hi,
    1. You can do that using icon "display document flow" (Shift + F5) on VA03, VL03N, VF03.
    2. Transaction SE38: programs: RIBELF00, RIBELF20. This should solve your problem.
    Hope it will help ;-).
    /MK
    Edited by: Maciej Kromolicki on Jun 4, 2008 10:52 PM

  • Unwanted Document Flow (VTAA)

    Hello experts,
    We are working through our configuration in attempt to disable the document flow off contracts of deliveries, goods issue, and billing documents.  Through VTAA we have found the option "2" Create doc. flow records except for delivery/gi/billing doc, and we enabled the option.  Despite enabling it and confirming that we are pegged to the correct sales doc type and whatnot, the document flow table is still being updated with those documents when created.  Is there some other piece of configuration we need to examine to fix this?
    UPDATE: Added a screenshot of the program SDVBFA21 which I found simulates what would need to be retroactively cleared from the document flow table based on the current configuration.  So that program confirms that the test deliveries/goods issues/billing document should be removed from the table, meaning our configuration profile is current per the requirement we are attempting to achieve, but I do not understand why they were ever added to the document flow table to begin with...
    Appreciate any feedback!
    Message was edited by: Kelby Rubenstein

    Hello,
    In VTAA at the item level you can alter the system decision to carry out doc flow all the way through to the billing document in the case of contracts.  We've elected to alter our system so that contracts only provide document flow to their sales orders, then the deliveries, goods issue, and billing document pegs to the sales order instead of all the way up to its contract.
    After debugging on Friday, we discovered that the sales order is inheriting the incorrect document flow indicator (VBAP-UPFLU).  We are now trying to determine why this field is not inheriting what is configured, but we believe it may be due to user exits where the assignment of a contract is copying a lot of fields into the new sales document...

  • Archived Deliver not showing Document FLow _RV_LIKP

    Folks
    I have started archiving for delivery object. I am able to successfully archive one document and can view the document in SARI and the only issue i am having is the when i open the archive document  the ICON which shows "DOCUMENT FLOW" is not click able so user is not able to see the document flow to find the Sales Order/STO# it was created from.
    In my customization for RV_LIKP under the setting "    Archiving Control for Delivery" i have put residence time as "5" and RNO "0"
    Also what is the RNO field  stands for .
    Thanks

    Hi Andy,
    Go through the link given below.
    http://help.sap.com/saphelp_40b/helpdata/pt/b7/19752690e211d1a5510000e82deaaa/content.htm
    The last line looks important.
    Deliveries should be archived before sales documents and billing documents. This sequence is a result of the way the documents are linked via document flow.
    Hope it helps,
    Regards,
    MT

  • Make document preview icons bigger

    how can I make document preview icons bigger? They were MUCH bigger in Leopard. Can hardly get an idea of them now

    Are you referring to the icons shown in folders?
    If so, their size is adjustable. To do that, with a folder open and active and set to Icon view, open View Options from the View menu. There is a slider in there which you can use to adjust the size of the icons.
    Alternatively, go to the View menu and select Show Status Bar. This will add a small area at the bottom of the folder's window which will display some info about hard drive space, and will also contain a slider - this slider will adjust icon sizes.
    To adjust icon sizes in folders set to List or Cover Flow views, open View Options for the folder - there is a small choice of sizes, little and big.
    There is no adjustment for icon size in Column view.

  • What is document flow for particulr document?and how it will be configured?

    give me answ with detiled steps to configure document flow

    Hi
    The business cycle has different processes and each process will have a different documents to record the events/details of the activities about that activity. This is there even if the process happens manually.
    It helps you to know the status of an order - ie., that particular order is in which stage of the business cycle.
    As told in the above reply, the copy controls helps to link the documents and the field UPDATE DOCUMENT FLOW enables updating the preceding documents. The table that stores the document flow is VBFA and you can also see the document flow from any document by clicking the icon 'document flow'.
    Thanks,
    Ravi

  • Restrict sales document flow on va03/vl02n/and any sd tcodes

    hi experts,
    Is there a way to disable or restrict the document flow button found on SD transactions such as va03 and vf03? We would provide a separate report for the docflow, a custom one.
    Thank you in advance!

    Used exit for document flow LV05CFZZ

  • Probelm in document flow if sales order created with Propose item

    Hi,
      I am facing one pronlem  I have created some sales order  as one sales order was there as 100030636  then i have created new sales order by pressing the icon propse item ->sales document default material with quanity  then ref. to this in new sales order  all item with quanity as per order comes in the new order 100030637    but when i check the document flow of order it is showing as below
    100030636  being proseesd
    100030637  OPEN,
    as there si no link between those to  just to copy all the material from old SO i have use propse item , so how this link can be removed  so that in the document flow of 100030637  the order 100030636  should not come.
    regards,
    zafar

    Dear Zafar,
    Check if there is a copy control between your sale order types in VTAA.
    If yes, then in the item category, uncheck 'Update document flow' and then check.
    Thanks & Regards,
    Hegal K Charles

  • Step by step aproach for Document flow tree creation in Standard component

    Hi All,
    Can any one pls help in providing the steps i need to follow to create Document flow Tree using custom component in standard Opportunity/Quotation document.
    i Have created a component and assigned this component view as assignment block in Standard Component...
    but i would require the step -by-step ( Alogorithm kind off ) to extract the data flow from quotation document say to the creation of document flow ( tree with icons ) ..
    ANy help is appreciated !!!!

    Hi All,
    Can any one pls help in providing the steps i need to follow to create Document flow Tree using custom component in standard Opportunity/Quotation document.
    i Have created a component and assigned this component view as assignment block in Standard Component...
    but i would require the step -by-step ( Alogorithm kind off ) to extract the data flow from quotation document say to the creation of document flow ( tree with icons ) ..
    ANy help is appreciated !!!!

  • Proforma invoice number is not in the document flow of the order.

    Hi all,
    I have a doubt , if i create an proforma invoice based on order, and after that i create delivery and billing, i cannot able to see the  proforma invoice in the document flow of the particular order.   pls guide me on this
    Thanks all
    Kumi

    Hi,
    Goto VTLA, and check the  UPDATE DOCUMENT FLOW in the  copy control
    If it is already set , then directly from sales order you can find the Proforma invoice .
    Goto the sales order in VA02 and enter into the overscreen and from there check the document flow ( F5), now you can see the Proforma invoices.
    regards,
    santosh

  • Confirmation of service in document flow

    Dear all,
    how can i hide the confirmation of service lines in the document flow.
    Thanks

    Try removing all authorisation to the relevant transactions in PFCG. It might stop display in the document flow also.

  • Confirmation of service in the document flow, where it comes from?

    Dear all,
    I found a confirmation of service after I picking and posting goods issue, from the document flow.
    I just wondering, where it comes from? Or, how can I configure it on or off for display?
    (This is a standard ERP system, should not involve in the CRM module)
    Thanks,
    Edited by: Peng Li on Apr 29, 2008 10:04 AM
    Edited by: Peng Li on Apr 29, 2008 10:38 AM

    Hi Peng,
    This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
    Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
    Regards
    Nikhilesh

  • In mail, how do I attach pictures or documents as icons that open full size

    in mail, how do I attach pictures or documents as icons that will open full size?

    Try Option + click the picture and choose Show as Icon

Maybe you are looking for

  • How to do a manual backup of Time Machine.

    Hi, i am kind of new to Macs however i have lots of experience on PC and DOS. I am being asked to make a back up of around 10 External harddrives that were used by Time Machine to back up a user Mac. However this is the twist. I am being asked to to

  • Function module for hyperlink

    function module for hyperlink

  • Another slow rendering report

    Hi all, I'm having trouble with a very simple report that's rendering way too slow. And yes, I did look at all the other posts about performance, but none of them seem applicable.  It's a very simple, single page, single integer parameter report, wit

  • How to enable BPEL loggers at domain and system level ?

    As far as I know there are two kind of BPEL loggers - at domain and - system level Where EXACTLY can I enable/disable them resp. set them to e.g. DEBUG mode? Peter

  • Photoshop CS3 & Outlook 2007 - Can't copy and Paste

    I've recently converted to win7 and office 2007.  Under vista and office 2003 I could select an embedded image in an email, copy it to the clipboard, and then do a file/new in photoshop and paste the image.  Every since going to vista and office 2007