Document icon is not visible when run in portal.

Dear Experts,
I have a query and a character in query has been attached a document from BI Documents i am able to see the icon of document adjacent to the matching cell when i run the query in Bex Analyzer and also in RSRT1 transaction but not able to see the same when i see it i portal.
What needs to be done inorder to see the same icon in [portal also.
thanks and regards
Neel

Hi,
In order to display the document icon in portal use Analysis, Single Document and Document List Web items properties.
For reference please check this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2f60%2f1c143bfaed272de10000000a11402f%2fcontent.htm
Hope it helps.
Regards,
Mona

Similar Messages

Document message bar not visible when participating in Shared Review

Hi,
I have initiated a Shared Review using Acrobat Pro 8
Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have the option to check for new comments, publish comments.
My colleagues however, when they open the pdf file attachment from their email notification they get the message: "This document has been sent by a user of Acrobat 8.0 Professional for your review. To participate in this review Acrobat 8.0 standard or professional, or later, is required" Pressing OK on that message box opens up the PDF file to be reviewed however the Document Message bar is not visible (there is no Document Message bar icon on the left pane either.). Therefore my colleagues cannot publish their comments.
I also encountered the same issue. After I close my PDF and re-open it, I cannot see the Document Message bar, eventhough I can still see my Review Tracker and the document still listed there.
So, what did I do wrong? I started the shared review by following the prompts:
1. Comments > Send for Shared Review
2. Enable reviewers with Reader to participate
3. Select a network drive to store the shared comments
4. Select the document to be reviewed
5. I've experiment with all the different send notifications options
6. I specified the email address of the reviewers and sent the invite
Thanks a lot for the help..

Does this happen with one particular document or with all your reviews?

Icons are not visible when the form is run

I develop a form with only a push button. I developed form using oracle 10DS. I have saved my form in application server. To see an icon in my button, i did the following things:
1. In application server i made a jar named test.jar. It consists of just two gif images.
2. I copied this jar in application server's \forms90\java directory
3. I configured formsweb.cfg file as the following.
4. my \form90\java\oracle\forms\registry\registry.dat is as the following.
whenever i run form i can not see icon but in client's oracle jar cache jar is downloaded.
-------------------------------formsweb.cfg -------------------------------------------
=========================
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
#baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime
processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array%
obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record%
tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=codeBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow
_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,classes12.jar,test.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer,
etc)
archive=f90all.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,17
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version
=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7
# Single Sign-On OID configuration parameter
oracle_home=E:\Oracle_SHLAS
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group,
orclApplicationCommonName=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7,
cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle
JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
[test]
form=E:\ict\ITSUPPORT\test.fmx usesdi=yes
userid=support/s00001@dshl
width=100%
height=100%
colorscheme=blue
pageTitle=ICT Support :: Just in Time
imagebase=codebase
archive_jini=f90all_jinit.jar,rolloverbutton.jar,getclientinfo.jar,infobutton.jar,test.jar
webUtilArchive=frmwebutil.jar,jacob.jar
baseHTMLjinitiator=webutiljini.htm
#lookAndFeel=Oracle
splashscreen=ash.gif
logo=none
separateFrame=false
******************************************** registry.dat
---=========================
# This is the Registry file.
# This file contains the logical [Java] Class name and an associated
# [numerical] identifier that will be used to refer to objects of the
# class in order to reduce the amount of information that needs to be
# repeatedly transmitted to the client.
# This file is of the Form understood by java.util.Properties (for now)
# The System Level sound file is relative to the CODEBASE
oracle.classById.1=oracle.forms.engine.Runform
oracle.classById.4=oracle.forms.handler.FormWindow
oracle.classById.5=oracle.forms.handler.AlertDialog
oracle.classById.6=oracle.forms.handler.DisplayList
oracle.classById.7=oracle.forms.handler.LogonDialog
oracle.classById.8=oracle.forms.handler.DisplayErrorDialog
oracle.classById.9=oracle.forms.handler.ListValuesDialog
oracle.classById.10=oracle.forms.handler.EditorDialog
oracle.classById.11=oracle.forms.handler.HelpDialog
oracle.classById.12=oracle.forms.handler.FormStatusBar
oracle.classById.13=oracle.forms.handler.MenuInfo
# oracle.classById.14=UNUSED
oracle.classById.15=oracle.forms.handler.ApplicationTimer
oracle.classById.16=oracle.forms.handler.MenuParametersDialog
oracle.classById.17=oracle.forms.handler.PromptListItem
oracle.classById.18=oracle.forms.handler.CancelQueryDialog
oracle.classById.257=oracle.forms.handler.TextFieldItem
oracle.classById.258=oracle.forms.handler.TextAreaItem
oracle.classById.259=oracle.forms.handler.FormCanvas
oracle.classById.261=oracle.forms.handler.ButtonItem
oracle.classById.262=oracle.forms.handler.CheckboxItem
oracle.classById.263=oracle.forms.handler.PopListItem
oracle.classById.264=oracle.forms.handler.TListItem
oracle.classById.265=oracle.forms.handler.CfmVBX
oracle.classById.266=oracle.forms.handler.CfmOLE
oracle.classById.267=oracle.forms.handler.RadioButtonItem
oracle.classById.268=oracle.forms.handler.ImageItem
oracle.classById.269=oracle.forms.handler.IconicButtonItem
oracle.classById.270=oracle.forms.handler.BlockScroller
oracle.classById.271=oracle.forms.handler.JavaContainer
oracle.classById.272=oracle.forms.handler.TabControl
oracle.classById.273=oracle.forms.handler.ComboBoxItem
oracle.classById.274=oracle.forms.handler.TreeItem
oracle.classById.281=oracle.forms.handler.PopupHelpItem
# Defaults for the Font details, all names are Java Font names. Each of
# these parameters represents the default property to use when none is
# specified.
# defaultFontname represents the default Java fontName.
# defaultSize represents the default fontSize. Note that the size is
# multiplied by 100 (e.g. a 10pt font has a size of 1000).
# defaultStyle represents the default fontStyle, PLAIN or ITALIC.
# defaultWeight represents the default fontWeight, PLAIN or BOLD.
default.fontMap.defaultFontname=Dialog
default.fontMap.defaultSize=900
default.fontMap.defaultStyle=PLAIN
default.fontMap.defaultWeight=PLAIN
# Default Font Face mapping.
# appFontname represents a comma delimited list of Application Font Names.
# javaFontname represents a comma delimited list of Java Font Names.
# The number of entries in the appFontname list should match the number in
# the javaFontname list. The elements of the list are comma separated and
# all characters are taken literally, leading and trailing spaces are
# stripped from Face names.
# Note that this file uses the Java 1.1 Font names in order to be able to
# handle the NLS Plane (BUG #431051)
default.fontMap.appFontnames=Courier New,Courier,courier,System,Terminal,Fixed,Fixedsys,Times,Times New Roman,MS Sans Serif,Arial, Kunstler Script
default.fontMap.javaFontnames=MonoSpaced,MonoSpaced,MonoSpaced,Dialog,MonoSpaced,Dialog,Dialog,Serif,Serif,Dialog,SansSerif, Kunstler Script
# The Application Level icon files are relative to the DOCUMENTBASE
# example: icons/
# or an absolute URL.
# example: http://www.forms.net/~luser/d2k_project/
default.icons.iconpath=
default.icons.iconextension=gif
# Application level settings to control UI features
app.ui.lovButtons=true
app.ui.requiredFieldVA=false
# The background color is specified as an RGB triple.
app.ui.requiredFieldVABGColor=255,0,0
---====================================
I tried many times. But could not be successful. Then I just kept my icons in
\forms90\java directory without making jar. In my form, icon file name is the icon name without extension. Here, i can see my icon in button. but if i replace an icon
without changing the name of the icon, then i always see the old icon. The new icon, i can not see.
Please, help me with only Oracle 10g AS how i can see icon in button. Let's assume, there is not oracle 10g DS (any development tool) in the machine where the form is run.
Please, guide me clearly step by step so that i might be successful.
Thanks.
TKARIM

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

How do I "eject" camera from iPhoto app when the icon is not visible in the left-hand column?

The "eject" icon is not visible so I'm concerned about just unplugging my camera from the USB portal. I think it could wipe out the existing files on the card.

If your camera mounts to the desktop uyou can dismount it from the finder
LN

TS1506 My attachment symbol is not visible when I am sending an email. How do I get it back?

Attachment option is not visible when sending an email through aol.com.

When you are composing an email tap at the location you want to insert a photo or video. The option to insert comes up. Tap on that and select the photo or video you wish to insert.
Alternately you can use the Photos app and select up to five photos to insert into an email. Tap select, select the photos and then tap the Share icon. Select Mail and an email will be created. You can then address the email, add a subject and type in content.
To attach other things like a PDF, Word Doc, etc. you need to use the app that creates or edit seize items. Again select the item you want to email and tap on the Share icon in the appropriate app.

My firefox toolbars are not visible when I open firefox

All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
== This happened ==
Every time Firefox opened
== when I logged on one day about 2 weeks ago ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

HT3529 I can't seem to use the imessage app as the icon is not visible from my home screen is it possible to reinstall one?

I could not send messages via imessage. The imessage icon is not visible on my home screen; however, when i type it on search bar the app appears. I it possible that i have deleted the app? If i did, can i reinstall one?

Go to Settings>General>Reset>Reset Screen Layout. The app/icon is just somewhere where y can't find it.

JTree not visible when compiled

I have a problem that my JTree is not visible when i export my project to jar file.
along with a button also. I have no idea why this may be happening so maybe some of you guys have heard of this before ?
the JTree is visible when running in Eclipse etc
any ideas?

JTrees shouldn't be visible when you compile, they should be visible when you run the application :)

HT201320 Re: I compose in yahoo using safari but the attachment icon is not visible, I compose in yahoo using safari but the attachment icon is not visible

i compose email using yahoo thru safari and the attachment icon is not visible
from apple ONLINE HELP they told me yahoo version is different than the ipad version??????????
then today they told me not to go thru safari but use the yahoo email app
tried that as well and still no icon of attachment is seen.
PLS CAN SOMEONE HELP AS TO HOW DOES ONE SEE THE ICON FOR ATTACHMENT....as even the apple store guys are unable to help

Iam trying to attach normal files

Battery icon dose not showing when i plug in to usb or power

battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

I would try another cable or try the cable in another ios device
to verify if the cable was broken or your iphones connector is

My own Google Map icons are not visible in Firefox 8

I have many Google Maps on my website and they contain both default Google icons and my own icons, each with their own URLs. They work correctly in all other browsers, and Firefox 7. However, yesterday I loaded Firefox 8. In Firefox 8 the Google default icons are still visible but my own icons are now invisible, but their placeholders are still there. They are still visible in other browsers. Also, if I now try and add one of my icons to a map, the process seems to work correctly, including a placemark name appearing, but the icon is invisible. The invisible icon is definitely there because you can click the placemark and be taken to the correct position on the map for editing, but the icon is not visible.

Same problem with my maps. You posted that this issue is solved at http://forums.mozillazine.org/viewforum.php?f=25 but it is NOT SOLVED!!!!! I'm not a web developer, so I don't want a solution where I have write code or be a developer to figure it out. It works in every other browser & in FF7, so why can't you just figure it out & fix it, instead of making us have to write code or use our own developers to figure it out??

Field not visible when uploading the file in application ser

Hi,
I have added a new field at the end of a structure and When i upload the data in the application server it is not visible there. The new field length is 30chars(say field 'A') and the one just before this one is 250 chars(say field 'B'). When i reduce the length of field 'B' to 30 chars or 40 chars the value which i populated in field 'A' is visble in the output file.
Since the complete file was not visible in AL11 transaction, i used the CG3Y tcode as well to download the data to presentation server so that i can view the complete file. Even after downlaoding in presentation server the new field value is not visible.
Can anyone please suggest why is the value in field 'A' not visible when the length of field 'B' is 250 chars? Also, how can i display the value of the new field in the application server.I cannot change the layout of the structure as per the requirement. Any help will be very useful.
Thanks in advance,
Sneha.

Hi Sneha.. Happy new year
<you subject is missing ver from the server, thats why your server doesnt like you :P>
-ok, lets go step by step. how did you upload the file?
-after uploading the file check the file in OS level(goto SM69, execute CAT, in additional parameter (not in parameter) give the full path (case sensitive), execute. ). here you can see the actual content of the file... check you data is present or not
-which structure are you using to download and upload? a temp work area.. then please provide the WA details, so that i can try on my system.
lets see what happens next
one more thing: regarding AL11, it can read upto length 510 characters. check program RSWATCH0 form SHOW_FILE. here the read dataset into butffer is 510 characters.

SAP Gateway- environmental variables not loaded when running brconnect

Hello
i have installed the Sap gateway on MSCS
and the RFC check in sm59 is successful,
However when i run a job in db13 it fails with "brconnect is not recognized as ......... "
<sid>adm has all environmental variables set correctly
SAPService<SID> has them too
when i run brconnect on OS level it works fine with <sid>adm and SAPService<SID>
however if create a brconnect.cmd file where i specify the command as
SET ORACLE_SID= ....
SET SAPDATA_HOME=....
C:\windows\sapcluster\brconnect.exe ...........
and run it in sm69 it works fine
Any ideas how to solve this, seems the variables are not taken when running sapxpg
, i don't want to edit the SDBAC for every command
P.S
set from sm69 returns only the system wide variables, however i have the two systems on this host, and can not make the environmental variables for ORACLE_SID and SAPDATA_HOME system wide as this will cause problem with the other sap system
Edited by: Yavor Markov on Apr 12, 2010 6:07 PM

Hi Markov,
Can you tell us with which user id you have installed SAP as well as check the sap services are running with which user id, if it is not <sid>adm then you have to check the environment variables of that user.
Also you can try adding c:\windows\sapcluster in PATH environment variable.
Regards,
Kishore Soma

Upload multiple documents option is not visible for one user in SharePoint 2007.

Hi,
For one user Upload multiple documents option is not visible.
We are using SharePoint 2007 environment.
User is using IE 9 32 bit,Office 2010.
I did repair office 2010.
Active x controls are enabled.
Please anyone help me on this.
Thanks,
Ashok

Hi,
According to your post, my understanding is that after client upgraded to Office 2013 the option for Upload multiple document was grayed out.
I try to reproduce the issue in my environment, however everything works well.
My configuration of system is:
Windows 8.1;
IE11;
Office 2013 32bit.
Please repair the Office 2013 to check whether it works.
In addition, there are many thing you need to check. Please refer to:
http://sharepointknowledgebase.blogspot.com/2013/09/upload-multiple-documents-is-disabled.html
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
More information:
"Upload Multiple Documents" is disabled in Document Library
SharePoint 2010 : How to Enable Uploading Multiple Documents Functionality
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How do I enlarge the "presenter notes" window when running my presentation on an external display?

In the latest version of Keynote, the "Presenter Notes" window is a small horizontal field at the bottom of the presenter's computer screen. Only 3-4 lines of text can be seen. This means that when you have a few paragrahs of notes, you have to scroll through them as you are presenting. This is very cumbersome. In the previous version of Keynote you could change the relative size of the slides versus the "presenter's notes" boxes when running a presentation on an external display, but in the new version, I can't find a way of enlarging the "presenter's notes" field.
Also, in the new version, the preview slide doesn't show the initial text on the next slide if that text emerges as a "dissolve in" build when you advance forward through your slides. I always have the initial text on my slides automatically "dissolve in" after each slide transtion. But in the new version of Keynote, when in presenter mode, I can't see any of the text on the "next slide." This makes it difficult to anticipate what slide comes next . . . without going to the Navigator. Does any one have a solution for this?
Thank you.

I figured it out with the help of a post from a few days ago. Although posted for a different problem, I followed these steps from Cornelia-I and it worked like a charm:
You can change the link of LR to the images from the network drive to your local drive, best done on parent folder level: right-click the highest folder in library left panel, and choose update storage location. In the opening dialog window point it to your internal folder.

Document icon is not visible when run in portal.

Similar Messages

Maybe you are looking for