Document linked to a Message
Hi Experts,
From which table I will get the information about the document "(Invoice / Payment etc)" attached to a message/alert and how can I retrieve the document?
Scenario : I wrote a query to show alert , But it displays the same documents repeatedly . I am trying to stop this by incorporating a condition to the SQL Query, which will go and check the messages whether alert is allready send or not
Thanks and regards
Ajith G
Hi....
Try this query
SELECT T0.Subject, T0.UserText, T1.Value, T2.CardCode, T2.CardName, T2.DocDate, T3.SendDate, T3.SendTime
FROM OALR T0 INNER JOIN ALR3 T1 ON T0.Code = T1.Code INNER JOIN OINV T2 ON T2.DocNum = T1.Value INNER JOIN OAOB T3 ON T1.Code = T3.AlertCode WHERE T0.UserSign = [%0] and T1.Location = ''
Basically is focused to read the messages and data, in this case sending sales invoices. You can take it as a reference in case it is what you require.
I hope it will help
Best regards,
Similar Messages
-
Open Document Link on PO Approval WF
In the PO Approval Workflow, if you have the proper responsibility, an "open document" link is displayed that, when clicked, takes the user to a screen entitled "Notifications to Releases".
This function is available to our Purchasing Super User responsibility but is not available for the Purchasing Approver responsibility. I'm trying to change that.
Using help, I determined that the form associated with "Notifications to Releases" is POXPOERL. That form is assocated with the following functions and menus:
FORM_NAME FUNCTION_NAME MENU_NAME
POXPOERL PO_POXPOERL CHV_CHVSSWKB_FUNCTIONS
POXPOERL PO_POXPOERL PO_POXSTNOT_FUNCTIONS
POXPOERL PO_POXPOERL PO_POXPOVPO_FUNCTIONS
POXPOERL PO_POXPOERL PO_PURCHASE_ORDERS_GUI
POXPOERL PO_POXPOERL POS_INTERNAL_HP_MENU
POXPOERL PO_POXPPOERL_VIEW PO_POXSTNOT_FUNCTIONS
POXPOERL PO_POXPPOERL_VIEW PO_REQUESTOR_GUI
POXPOERL PO_POXPPOERL_VIEW PO_POXPOERL_FUNCTIONS
POXPOERL PO_POXPPOERL_VIEW PO_POXBWVRP_FUNCTIONS
I've tried, under Functional Developer, to add several of these to the menu for Purchasing Approver. When they show up on the menu and I click them, I get a message stating: "You are not setup as a buyer. To access this form you need to be a buyer."
All I want is for people to be able to see and use the "Open Form Command". Am I going about this the wrong way?I was probably not clear enough in my original question.
We want people who are approvers - but not necessarily buyers - to be able to open the form from the link. I'm not set up as a buyer, but I have the Purchasing Superuser responsibility and I can open the form.
I guess, bottom line... some more information on how to make links to eBiz forms work from WF would be helpful. I've not found much in the Oracle-supplied documentation that we have; I've read what's in the Developer's Guide and the Admin guide. Can anyone suggest a web link or two that might shed more light on the process? -
Can't log into BOE system using SAP Authentication when using Document Link
Hi all.
We are setting up our dev SBOP 4.0 SP2 system and are working on getting everything configured to our requirements.
What I am currently struggling with is the Document Link functionality.
If you browse to a document (WEBI or Crystal) in the folder view in the BI Launchpad and right click and select Document View, the system presents a static link to the report. The problem is, when I execute that link in another browser window, the system prompts me with the default login screen that consists of the User Name and Password which utilizes the Enterprise authentication by default. Our login authentication is set to SAP everywhere else.
I've already set the parameters for BILaunchpad.properties to allow us to log into the BOE server using our user IDs and that works without a problem. I've also configured the OpenDocument.properties file as well. Neither of these two files seem to have any impact on the screen I'm seeing when I try to use the Document Link. (And yes, I've restarted the tomcat server each time I've made a change to the config files.)
I'm running out of ideas - have any of you encountered this issue before and do you have any suggestions?
Thanks.
-BrianHi,
i saw this also a couple of times that the changes to the "custom" folder wont take affect.
Try the following:
1. Stop the Tomcat
2. Rename the properties file in the custom folder
3. take a backup of the properties file from the config folder
4. make the changes to the properties file in the config folder
5. start tomcat
Maybe this will solve the issue but if you deploy a new Fix Pack or Service Pack these Settings will get override.
If this solved your problem i would recommend you open a Support Message with the SAP Support.
Regards
-Seb. -
How to add a link to your message
Does anyone know how to add a link to a message?
laptopman,
As Klaus1 posted, you can also use the Character Palette.
In the Palette, select View : Glyph > Glyph Catalog. You will find the , among others, there.
You can copy & paste, or position the cursor where you want the glyph in a document, highlight the glyph, and click on Insert with Font.
If the Character Palette is not in your Menubar, open System Preferences > International > Input Menu: Checkmark Show input menu in menubar.
To open the Palette, click on the Flag icon in the Menubar, and select Show Character Palette.
ali b -
Forcing "Open cross-document links in same window" to be unchecked
Hi All,
I am distributing a PDF document set where there is one PDF with well over a hundred links to other PDFs which are located in sub-folders.
The set will be distributed on USB thumb drives.
It will be simplest for users if they have "Open cross-document links in same window" unchecked.
Is there a way I can "force" it to be unchecked?
During a test, someone got a security warning: "This document is trying to access abcd.pdf" Allow/Block. Why are they getting that message when there is no Internet request?
Thanks very much for all thoughts and wisdom,
DavidIt works in an older version 6.0
Anyone know how to get this to work in the newer versions? -
Webi - Pass Hierarchy Filter via Document Link
Hi
I am creating WEBI reports on BO 4.0 SP2 patch 8.
I want to pass the parameters from Webi report 1 via document link to Webi report 2.
Within report 1 you can filter the data by the following:
Parameter 1: Customer
Parameter 2: Calender Month
Parameter 3: Profit center Hierarchy
Parameter 1 & 2 work perfectly the selected customer and month passes to report 2.
However Parameter 3: hierarchy is giving me hassles.
I enter the Hierarchy into the document prompt text and key in editing the document link.
On selecting the hyperlink I get the error message:
" Invalid answer 0HIER [ ] for variable ZPCTR_GRP error message WIS 00013."
Has anybody been able to pass a filtered Hierarchy via Document Links on BO 4.0?
Regards
GrahamHi,
I haven't seen this particular issue come through support.
the warning seems to suggest that an invalid selection has been made, however the brackets [ ] show nothing! So perhaps the string's been provided in the wrong format, or text is being returned when infact it needs key. (i'm speculating)
a few questions to begin:
- Are you passing a hiearchy interval as a range parameter ? (i.e. 2 or more nodes/members from different levels in the hierarchy)
- Do you notice a difference when using the other viewer technology: DHTML (WEB) vs JAVA (Rich) ?
It might be worth using the TraceLog service on the webi processing server and DSL_bridge (APS) to capture your workflow, and get more details error messaging. Also, RSTT trace in BW may catch something of interest.
Good luck
Regards,
H -
Hyperion Planner - Cell Document Links
Hi
I am trying to add a document link to a cell within a web form in Hyperion Planner. The document I wish to link to is simply on a shared server / local drive. Therefore the file path looks like:
T:\FINANCE\My Document.doc
However, an error message is produced saying that it "Entered value is not a valid URL for an attachment". If you put http:// in front of the above path it accepts it.
I assume there is a rule in place to check that the link has http:// at the start.
Is there a way to switch this validation off or adjust it? Or a way to get around this?
Thank you
MartinThanks John.
However, in a web broswer you could type "T:\FINANCE\My Document.doc" and it would open the document. Therefore there is no requirement for the link to start with "http://" which seems to be the rule in place.
Is there no way to get around this?
Uploading documents to the work space is not really an ideal solution as it duplicates document storage.
Thanks -
I am trying to insert a shortcut 'Add DocumentLink' like 'Add Document' inside a document library (just replacing upload.aspx with newlink.aspx (id=idHomePageNewLink) it brings up the first form to upload the Document URL & Title when click on OK gives
error message. We have created views in library with filters to show only specific documents to control access; from any view when they use 'Document Link' from ribbon it always lands up in a different view. please let me know how i can add shortcut linkHi M Raki,
You seems to add custom action in the Ribbon to replace the upload document function.
You can create custom action using CustomAction element in CAML, the following sample shows how to do this. And to achieve the upload function, if you don’t want to use default upload page, custom a layout upload page to achieve the upload, then redirect
to the default list view page.
Add Custom Button to the SharePoint 2010 Ribbon:
http://blogs.msdn.com/b/jfrost/archive/2009/11/06/adding-custom-button-to-the-sharepoint-2010-ribbon.aspx
Thanks,
Qiao Wei
TechNet Community Support -
Dear all,
is it possible to link a support message to another one, so that there's a flow between them (just like the flow between change request and change document)?
Any help would be much appreciated.
Regards
DanielHi
Yes you can do that but from SP23 onwards
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/76/1815e805b549158589a28645a20d89/content.htm
hope prob is solved
Regards
Prakhar -
4.x: Document Link passing range parameter to a WebI rpt using BEx query
I'm new to working with BEx queries, so I may use the wrong terminology. I'm trying to create a document hyperlink from one WebI report to another. Both are based on BEx queries, which I didn't create, nor do I have access to modify. The BEx query for the target report has a parameter, Fiscal year/period, which is a range parameter. The displayed value in a report or in pick lists is in the format "JUL 2010". The key is in the format "K4/007/2010".
I have tried using the Document Link expert to configure passing the range parameter, but have been unsuccessful. The typical result is an error message, ERR_WIS_30270, which is most likely the result of an incorrect format for passing the range. I've not been able to locate adequate documentation that describes the syntax for passing a range value to a BEx parameter. I've successfully created Document Links to reports using BEx queries that have a parameter that requires a single value, and I've done Document links in non-Bex reports in 3.1 without issues.
Has anyone successfully passed a range value to a BEx paramter? If so, what syntax did you use?
The environment is BI 4.0, sp 2 (14.0.2.439)
Edited by: Steve Green on Oct 7, 2011 8:04 PMMarianne,
Thanks for the heads up on the fixpack. I tried looking at the note # you sent, but a search of SAP Notes says that the note has not been released. However, reviewing the Fixed Issues in fixpack 6 shows the following item:
ADAPT01580012
Link to a WebIntelligence report using syntax OpenDocument fails when target document contains a prompt
based on a BEx variable of type Interval. Error message is "An internal error occurred while calling
'answerPromptEx' API. (Error: ERR_WIS_30270)".
Behavior is now correct and refresh operation takes into account interval answer passed in OpenDocument URL.
Now we just need to upgrade to fp 2.6 to see if it resolves this issue. I've also opened a ticket with support, so I'll see what they say.
Edited by: Steve Green on Oct 12, 2011 7:27 PM -
How to stop Link syncing voice messages?
Is there a way to stop BB Link syncing voice messages to my PC?
In Link, the only media I am syncing is Music and I am doing that by specifically selecting by genre. I do have Music as a genre is set to sync in that list. My voice AAC files don't appear to have any genre set so why are they being sync'd too?
BB Device Q10 10.3.1.2558
BB Link 1.2.4.27
8310 - 9300 - currently Q10 on 10.3.1.2558 - hoping it will be bug free soon!
Solved!
Go to Solution.Sorry I do not know the answer, you may find some help here:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB35488&sliceId=2&docType=kc&noCo...
http://docs.blackberry.com/en/smartphone_users/subcategories/?userType=1&category=BlackBerry+Link -
Add new document link not working in upgraded sharepoint 2013?
Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
SushilHi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.
Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum -
How to get "Open Document " link
Dear Friends,
I have customized a Requisition Notification based on PL/SQL documents and work flow concepts.
I have created no.of requisitions to test. Each requisition have 3 persons involved say A ,B , C
One for submitting ,other two for approval .
After person B approves., it will go to C. till now Everything working fine ,
But In person C's notification list , the link called "Open Document " is missing to open the submitted requisition.
Do I NEED TO SET UP ANY THING .
How to resolve this .Any idea .Plz share.
Let me know for any clarification.
Thanks
Aravinda.Dear friends
It's solved.
Just add Purchasing responsibilty to that user to whom that "open document link " is not visible in the notification.
Thanks
Aravinda. -
How to get the custom integrator in Manage Document Links
Hi All,
My requirement is "Creating Word Documents Using Web ADI", I am following the document
Oracle® Human Resources Management Systems
Configuring, Reporting, and System Administration Guide
Release 12.1
Part No. E13509-02
From page no. 194.In that section, No.8. Use the Manage Layout Document Links page to create a link between the
integrator and layout and the Word template.
See: Creating Links between Template Letters and Layouts, page 2-33
2-33>>
Select Manage Document Links from the Web ADI menu.
But when I click on the "Manage Document Links", I couldn't see my custom integrator to associate my word document with my integrator.
I could see only the standard integrators.
How to get my custom integrator in "Manage Document Links". I could see my custom integrator in define layout but not in this page.
Thanks.
With Regards,
Kali.Hussein,
Thanks for your reply.
I followed the
Note 360105.1 -Understanding and Using Web ADI in Oracle HRMS, and the section "Letters",
I could follow all the steps, except the following,
The reason is, when I click on Manage Documents Links, I am not getting my newly created integrator.
If I link a standard integrator "HR People Details" to my document, that is opening properly.
But I am not able to link my document with my integrator(which is based on my view).
c. Now link the template letter to the Letter Integrator and Layout.
If not already done so, Add the function WebADI Manage Document Links to your Web ADI menu, and give it a prompt of Link Document.
Select Link Document option , and Web ADI Mail Merge page displays. Choose your Letter Integrator. Link it to the Layout, and a list of template documents uploaded to the database is displayed. Select the template letter to be linked with the layout.
Thanks.
With Regards,
Kali.
Maybe you are looking for
-
IPhone World Clock doesn't show the correct times
How do I get the iPhone to show the correct World Clock times. I have the time zone set to San Diego and the clock time is correct. When I set San Diego as one of the World Clock times it shows a time 7 hours behind. New York is 4 hours behind instea
-
Can I use DSLR to capture stop motion in PE8?
No luck in having "Get Media" find my Canon T2i which I want to use for stop motion, or my Canon FS200 for that matter. Other stop motion capturing software I have sees both, but I need to use PE8.
-
Trying to transfer books off of the computer over to the IPad it won't allow me to the computer is tellingme that it is syncing my IPad (step 2 to 7) backing up. And seems to be stuck won't allow me to do anything. Help
-
I assume i have iMovie HD 6 since i bought my MacBook in july. How would i burn my iMovie project( which is my movie/slideshow from vegas) how would i burn it so it will play(i have a DVD recorder which burns and plays DVD+R) so i want to burn my pro
-
Hi Friends, My client is not implementing QM module. But we have to give accept and reject options for recieving semifinished from sub contractor. Then we had given this as batch characteristics as rejected and accepted. Now if the ma