Document Password Protection

I am running Pages v5.2 on my iOS and wanted to know if my password protected pages documents were encrypted. If not, what might be the best way to go about doing this?
Thank you,
Patrick

Password protect, compress, and apply 256-bit AES encryption to a Pages v5.2 document
Using the File menu in Pages v5.2, password protect your document
Do not check keep in keychain, if you always want the password prompt, even if it is you on the same computer. Otherwise, your local keychain will automatically unlock the document when opened.
Keep a record of that password
Create a new folder (e.g. Pagesv5-encrypted)Place your document into this folder
Launch /Applications/Utilities/Disk Utility
File > New > Disk Image from Folder
Navigate in the File Chooser to your folder with the Pages v5 documentSingle-click the folder, and then click Image
A New Image from Folder dialog appears
Pick the new location for your compressed, encrypted folder
Put a tag color on it if you use one for security content
Image Format: compressed
Encryption: 256-bit AES
Save
Provide a password, and keep it in a safe placeSame consideration about the keychain as in 1.1
OK
For a single text file, this process will be over in about 5 seconds. You now have a compressed, encrypted disk image. When you double-click it, it will want password validation to open the disk image on your Desktop. Once open, you will need to provide the password to further open the Pages document(s). The disk image mounts to your Desktop just like removeable media. You right-click on the disk image bearing the folder name, and choose eject. The original compressed, encrypted disk image (dmg) is untouched.

Similar Messages

  • How can I make a document password protective in Business Bluprint?

    Dear Folks,
    How can I make a document password protective in Solar01.
    Regards.

    Hi Nabi,
    Before uploading the document in SOLAR01 make it password protected. Your requirement will be met.
    best regds,
    Alagammai.

  • Document password protection not working in Finder or Spotlight

    I have set a password protection for my personal journal. I need to enter the password when opening it in Pages 09 HOWEVER if i search for my journal through spotlight or the finder, it opens the journal without entering the password. This means anyone has access to my journal by searching for it.Why is this happening?? Am I not doing something correctly? Thanks in advance.

    I tested under 10.4.11 and 10.5.7.
    On my machines, Spotlight is unable to search in password protected Pages documents.
    I had a doubt linked to the feature "Include Preview in document" which is disabled on my machines but even when I enable it, Spolight fails to look in the documents.
    Maybe your password is registered in Keychain as one allowing automatic opening.
    Yvan KOENIG (from FRANCE samedi 4 juillet 2009 15:38:27)

  • HT4641 Does pages have a document password protection function

    Does pages have a password protection function since adobe PDF for IPhone3gs or IPad2 does not?

    If you were to think laterally about this, you could also create encrypted archives for just those folders or files you were interested in to minimise the possible harm. Similar to the disk images Magnus suggested, but slightly less trouble. Modern Macs are very fast at unarchiving these files so you can work on them then archive them again without too much trouble.
    I am a great fan of those tiny USB harddrives and thumbdrives, which easily slip into your pocket so you can take them with you.
    My backup consists of a set of three 4Gb USB thumbdrives for my documents and 3 differently colored USB harddrives for my larger material.
    If your work is on these, you simply detach them from your computer and keep them locked up or on your person.
    Nobody will be able to access those without bailing you up.
    … And of course you can use a combination of any and all of the above suggestions.

  • Insert signature after document password protected

    Is there a way to insert a signature after the document has been password protected?

    I think it would be better if you set it up to use a digital signature. You can add a signature field to the form and the user could sign it. The appearance for the signature could be the same thing as it would be if they placed the signature using the method you pointed out. It could also be set up to lock the document after the signature is placeed, which will prevent others from changing it. The users will need to be informaed about creating or otherwise obtaining a digital ID to use when signing, but this isn't too difficult.
    One probelm with e-signing is Acrobat/Reader flattens the form when the document is saved. This prevents the user from revising it if needed. It also removes the form fields and just leaves their appearances, making it very difficult to extract the form data if needed. It also means you can't use security like you want. Digital signatures provide a better way to verify that a particular person signed the document. An e-signature used outside of a service like EchoSign does not provide any level of verification.
    Without knowing the specific needs of the cleints of the consultants, it's hard to say for sure what the best approach is.

  • Why when I open my password protected Pages document it doesn't require me to enter the password that I have set to see the document?

    When I open my Pages app and try to open my previously password protected document it doesn't require me to enter the password to see the document. It just takes me straight to the document like any other document that isn't password protected. Isn't this the point of having a document password protected so no one can see it without knowing the password? Am I missing something when I set the password in the first place? Thanks.

    When you set a password in Pages v5(.2), you are offered a check box to remember the saved password in your keychain. If you do not enable this check box, you will always be prompted locally for the document password. If checked, before opening the document, Pages queries keychain if it knows anything about the current local document security, and once confirmed, it simply opens the document without a challenge.
    To disable the keychain knowledge for the local document, you open the document, and choose File > Change Password… . Enter the current (old) password only, then select the Remove Password button. Now, you can use File > Set Password… again to set the password, and omit the Remember this password in my keychain option. The desired document password prompt will occur on your local (and remote) access.

  • I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

    I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

    You saved it after setting the Password? :
    Inspector > Document > Document > Require Password to Open
    I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
    Peter

  • Does pages encrypt password-protected documents?

    I would like to protect a document against reading its contents by others. Therefore I would like to know whether Pages encrypts a document when you set a password on it. I tried to look at the contents of a .pages file, but even when it is not encrypted I could not find back the text in clear form. So is the document always encrypted anyway? If encryption is used, how strong is it?
    Observation: an encrypted document of 65k shrinks to 24k when you set a password on it. When you then remove the password it is 49k. Very puzzling...

    Thanks for taking the time to write again, Peter. I don't think I will take it to Apple Care, it would probably take a lot of time and trouble to get an answer, if at all. Instead, I will just assume that, if there had been encryption, that would have been a feature worth mentioning in the user documentation. And since the user manual and help pages do not mention it at all, just password protection, the most likely answer is that there is no encryption.
    I will assume that you are right with your suggested proprietary file layout, possibly in combination with compression. For serious business, I will encrypt the file using a separate tool.
    BFN,
    Jan

  • Is it possible to open a password protected pages document made on my mac on my iPad?

    I can't find the answer anywhere in the Pages documents or googling, so I thought I'd ask here. I own Pages on my ipad, but not my imac. The ipad version won't create a password protected file, but the mac version will. Could someone who has Pages on both their mac and ipad do a quick test for me to answer this. It should be as easy as:
    1) create and save a password protected document on the mac Pages
    2) sync it through icloud to the ipad.
    3) try to open it on the ipad Pages.
    4) report back
    If the answer is yes, I'll probably buy Pages for the mac, but if not, probably won't.
    Thanks in advance,
    Paul

    One previous simila query resulted in the following:
    https://discussions.apple.com/message/15607840#15607840
    Good Luck

  • Can't password protect documents

    A year ago I bought a  license for Adobe Acrobat Standard which included access to certain features including the ability to password protect documents.  Suddenly it has stopped working.  I have already re-downloaded my product version and that has not solved the problem and can find nothing online to help.  Any suggestions or solutions will be appreciated.

    This is the forum for the free Reader software. If you are sure you are using Acrobat and not Reader, you'll want to visit the Acrobat forum for help.
    Acrobat forum

  • My Mac got hacked. I was working on a word document when the computer suddenly started typing meaningful sentences on its own that describes how the hacker is skillful. At the that time I was on a password protected wifi and file sharing was off.

    This is the first time I get hacked this bad. I was working on a microsoft word document when the computer suddenly started typing meaningful sentences on its own that describes how skillfull the hacker is. At the that time I was on a friends wifi network that is password protected (not sure about the encyrption), the Os X Firewall was on. I was using the admin profile, however, file sharing was off. I'm very careful not to install any suspecious 3rd party software.
    So far I have verified permissions and fixed some errors there, and changed passwords.
    Do I have to erase/format my computer and reinstall the Os? If so is it adequte to use the internet recovery tool or will it use old and possibly infected EFI/Root files?
    Would appreciate the advice of all the Mac experts out there. Thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo launchctl getenv DYLD_INSERT_LIBRARIES; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; launchctl getenv DYLD_INSERT_LIBRARIES; echo; crontab -l 2> /dev/null; } | open -ef
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • How do I password-protect a PDF document that doesn't let me change the security settings?

    I want to password-protect my PDF document (so when I email it, it can only be opened/read by intended recipients as it contains confidential/sensitive information) but when I go into document security, I'm unable to change the Security Method (which is currently set to 'No Security' - not by me).  There's a 'show details' icon but it's grey so I can't click on it.  What can I do to protect this document from being opened by non-intended recipients?

    Ah, yes, I'm using Adobe Reader!  That makes sense.  Thanks so much for your reply.  At the moment, I scan Word documents into my computer and they're automatically converted to PDFs.  If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?

  • When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents.  I assume it is a default security under the enhanced security settings of the Acrobat

    When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents.  I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

    Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
    Be well...

  • I have Adobe Reader XI and I tried to open a document download and a box appeared stating it was a password protected document ant requested a password. Were and how do I one?

    I have Adobe Reader XI and I tried to open a document download and a box appeared stating it was a password protected document ant requested a password. Were and how do I one?

    Hi noswam123,
    If a PDF file is password protected, the only way to open that document is with the password. You will have to get that password from the person who created the PDF.
    Best,
    Sara

  • Password protecting digitally signed documents in Adobe Acrobat X Pro

    I am looking for the combination of steps to get my digitally signed documents to be password protected for secure distribution. My documents contain new "user password" information and a number of "areas" which require digital signatures to be added.
    Any input as to how one would construct a document with :
    one to three --> digitally signed signatures fields in one document
    Password "opening" protection for the document containing the fields; both signatures and sensitive data fields
    suggestions on how to make the document open to accepting more signatures without it demanding the creation of a newly saved document after being digitally signed by one signature
    I have worked at this a couple of different ways but am having problems finding the right combination/sequence of steps to make it all come together.
    Please assist.....
    Thanks....

    ......meaning.......
    I can't do locking of the printing or editing of the sheet after i have encrypted and signed it.  Trying to do so, wipes out out signatures. Yes, it is a great fullproof to have people be unable to change something someone has signed but if there is an ammendment, can't the creator reserve that right and in an automated sense notify the signers of the rights of the author ?
    Maybe I am looking for too much but, it would be great to know if that is the reality of the whole event.
    Thanks,
    Robert

Maybe you are looking for